lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
8b9909ded6
android_kernel_xiaomi_sm8350/drivers/net/tulip/uli526x.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

1746 lines
46 KiB
C
Raw Blame History

/*
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*/
#define DRV_NAME "uli526x"
#define DRV_VERSION "0.9.3"
#define DRV_RELDATE "2005-7-29"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <asm/processor.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
/* Board/System/Debug information/definition ---------------- */
#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/
#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/
#define ULI526X_IO_SIZE 0x100
#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */
#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */
#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
#define TX_BUF_ALLOC 0x600
#define RX_ALLOC_SIZE 0x620
#define ULI526X_RESET 1
#define CR0_DEFAULT 0
#define CR6_DEFAULT 0x22200000
#define CR7_DEFAULT 0x180c1
#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
#define MAX_PACKET_SIZE 1514
#define ULI5261_MAX_MULTICAST 14
#define RX_COPY_SIZE 100
#define MAX_CHECK_PACKET 0x8000
#define ULI526X_10MHF 0
#define ULI526X_100MHF 1
#define ULI526X_10MFD 4
#define ULI526X_100MFD 5
#define ULI526X_AUTO 8
#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
/* CR9 definition: SROM/MII */
#define CR9_SROM_READ 0x4800
#define CR9_SRCS 0x1
#define CR9_SRCLK 0x2
#define CR9_CRDOUT 0x8
#define SROM_DATA_0 0x0
#define SROM_DATA_1 0x4
#define PHY_DATA_1 0x20000
#define PHY_DATA_0 0x00000
#define MDCLKH 0x10000
#define PHY_POWER_DOWN 0x800
#define SROM_V41_CODE 0x14
#define SROM_CLK_WRITE(data, ioaddr) \
outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
udelay(5); \
outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
udelay(5); \
outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
udelay(5);
/* Structure/enum declaration ------------------------------- */
struct tx_desc {
u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
char *tx_buf_ptr; /* Data for us */
struct tx_desc *next_tx_desc;
} __attribute__(( aligned(32) ));
struct rx_desc {
u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
struct sk_buff *rx_skb_ptr; /* Data for us */
struct rx_desc *next_rx_desc;
} __attribute__(( aligned(32) ));
struct uli526x_board_info {
u32 chip_id; /* Chip vendor/Device ID */
struct net_device *next_dev; /* next device */
struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
long ioaddr; /* I/O base address */
u32 cr0_data;
u32 cr5_data;
u32 cr6_data;
u32 cr7_data;
u32 cr15_data;
/* pointer for memory physical address */
dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
dma_addr_t first_tx_desc_dma;
dma_addr_t first_rx_desc_dma;
/* descriptor pointer */
unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
unsigned char *buf_pool_start; /* Tx buffer pool align dword */
unsigned char *desc_pool_ptr; /* descriptor pool memory */
struct tx_desc *first_tx_desc;
struct tx_desc *tx_insert_ptr;
struct tx_desc *tx_remove_ptr;
struct rx_desc *first_rx_desc;
struct rx_desc *rx_insert_ptr;
struct rx_desc *rx_ready_ptr; /* packet come pointer */
unsigned long tx_packet_cnt; /* transmitted packet count */
unsigned long rx_avail_cnt; /* available rx descriptor count */
unsigned long interval_rx_cnt; /* rx packet count a callback time */
u16 dbug_cnt;
u16 NIC_capability; /* NIC media capability */
u16 PHY_reg4; /* Saved Phyxcer register 4 value */
u8 media_mode; /* user specify media mode */
u8 op_mode; /* real work media mode */
u8 phy_addr;
u8 link_failed; /* Ever link failed */
u8 wait_reset; /* Hardware failed, need to reset */
struct timer_list timer;
/* System defined statistic counter */
struct net_device_stats stats;
/* Driver defined statistic counter */
unsigned long tx_fifo_underrun;
unsigned long tx_loss_carrier;
unsigned long tx_no_carrier;
unsigned long tx_late_collision;
unsigned long tx_excessive_collision;
unsigned long tx_jabber_timeout;
unsigned long reset_count;
unsigned long reset_cr8;
unsigned long reset_fatal;
unsigned long reset_TXtimeout;
/* NIC SROM data */
unsigned char srom[128];
u8 init;
};
enum uli526x_offsets {
DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
DCR15 = 0x78
};
enum uli526x_CR6_bits {
CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
};
/* Global variable declaration ----------------------------- */
static int __devinitdata printed_version;
static char version[] __devinitdata =
KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
DRV_VERSION " (" DRV_RELDATE ")\n";
static int uli526x_debug;
static unsigned char uli526x_media_mode = ULI526X_AUTO;
static u32 uli526x_cr6_user_set;
/* For module input parameter */
static int debug;
static u32 cr6set;
static int mode = 8;
/* function declaration ------------------------------------- */
static int uli526x_open(struct net_device *);
static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
static int uli526x_stop(struct net_device *);
static struct net_device_stats * uli526x_get_stats(struct net_device *);
static void uli526x_set_filter_mode(struct net_device *);
static const struct ethtool_ops netdev_ethtool_ops;
static u16 read_srom_word(long, int);
static irqreturn_t uli526x_interrupt(int, void *);
static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
static void allocate_rx_buffer(struct uli526x_board_info *);
static void update_cr6(u32, unsigned long);
static void send_filter_frame(struct net_device *, int);
static u16 phy_read(unsigned long, u8, u8, u32);
static u16 phy_readby_cr10(unsigned long, u8, u8);
static void phy_write(unsigned long, u8, u8, u16, u32);
static void phy_writeby_cr10(unsigned long, u8, u8, u16);
static void phy_write_1bit(unsigned long, u32, u32);
static u16 phy_read_1bit(unsigned long, u32);
static u8 uli526x_sense_speed(struct uli526x_board_info *);
static void uli526x_process_mode(struct uli526x_board_info *);
static void uli526x_timer(unsigned long);
static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *);
static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *);
static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *);
static void uli526x_dynamic_reset(struct net_device *);
static void uli526x_free_rxbuffer(struct uli526x_board_info *);
static void uli526x_init(struct net_device *);
static void uli526x_set_phyxcer(struct uli526x_board_info *);
/* ULI526X network board routine ---------------------------- */
/*
* Search ULI526X board, allocate space and register it
*/
static int __devinit uli526x_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct uli526x_board_info *db; /* board information structure */
struct net_device *dev;
int i, err;
ULI526X_DBUG(0, "uli526x_init_one()", 0);
if (!printed_version++)
printk(version);
/* Init network device */
dev = alloc_etherdev(sizeof(*db));
if (dev == NULL)
return -ENOMEM;
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
err = -ENODEV;
goto err_out_free;
}
/* Enable Master/IO access, Disable memory access */
err = pci_enable_device(pdev);
if (err)
goto err_out_free;
if (!pci_resource_start(pdev, 0)) {
printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_request_regions(pdev, DRV_NAME)) {
printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
err = -ENODEV;
goto err_out_disable;
}
/* Init system & device */
db = netdev_priv(dev);
/* Allocate Tx/Rx descriptor memory */
db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
if(db->desc_pool_ptr == NULL)
{
err = -ENOMEM;
goto err_out_nomem;
}
db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
if(db->buf_pool_ptr == NULL)
{
err = -ENOMEM;
goto err_out_nomem;
}
db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
db->first_tx_desc_dma = db->desc_pool_dma_ptr;
db->buf_pool_start = db->buf_pool_ptr;
db->buf_pool_dma_start = db->buf_pool_dma_ptr;
db->chip_id = ent->driver_data;
db->ioaddr = pci_resource_start(pdev, 0);
db->pdev = pdev;
db->init = 1;
dev->base_addr = db->ioaddr;
dev->irq = pdev->irq;
pci_set_drvdata(pdev, dev);
/* Register some necessary functions */
dev->open = &uli526x_open;
dev->hard_start_xmit = &uli526x_start_xmit;
dev->stop = &uli526x_stop;
dev->get_stats = &uli526x_get_stats;
dev->set_multicast_list = &uli526x_set_filter_mode;
dev->ethtool_ops = &netdev_ethtool_ops;
spin_lock_init(&db->lock);
/* read 64 word srom data */
for (i = 0; i < 64; i++)
((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
/* Set Node address */
if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */
{
outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode
outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port
outl(0, db->ioaddr + DCR14); //Clear reset port
outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer
outl(0, db->ioaddr + DCR14); //Clear reset port
outl(0, db->ioaddr + DCR13); //Clear CR13
outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port
//Read MAC address from CR14
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inl(db->ioaddr + DCR14);
//Read end
outl(0, db->ioaddr + DCR13); //Clear CR13
outl(0, db->ioaddr + DCR0); //Clear CR0
udelay(10);
}
else /*Exist SROM*/
{
for (i = 0; i < 6; i++)
dev->dev_addr[i] = db->srom[20 + i];
}
err = register_netdev (dev);
if (err)
goto err_out_res;
printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev));
for (i = 0; i < 6; i++)
printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
printk(", irq %d.\n", dev->irq);
pci_set_master(pdev);
return 0;
err_out_res:
pci_release_regions(pdev);
err_out_nomem:
if(db->desc_pool_ptr)
pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
db->desc_pool_ptr, db->desc_pool_dma_ptr);
if(db->buf_pool_ptr != NULL)
pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
db->buf_pool_ptr, db->buf_pool_dma_ptr);
err_out_disable:
pci_disable_device(pdev);
err_out_free:
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
return err;
}
static void __devexit uli526x_remove_one (struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct uli526x_board_info *db = netdev_priv(dev);
ULI526X_DBUG(0, "uli526x_remove_one()", 0);
pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
db->desc_pool_dma_ptr);
pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
db->buf_pool_ptr, db->buf_pool_dma_ptr);
unregister_netdev(dev);
pci_release_regions(pdev);
free_netdev(dev); /* free board information */
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
ULI526X_DBUG(0, "uli526x_remove_one() exit", 0);
}
/*
* Open the interface.
* The interface is opened whenever "ifconfig" activates it.
*/
static int uli526x_open(struct net_device *dev)
{
int ret;
struct uli526x_board_info *db = netdev_priv(dev);
ULI526X_DBUG(0, "uli526x_open", 0);
ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
/* system variable init */
db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
db->tx_packet_cnt = 0;
db->rx_avail_cnt = 0;
db->link_failed = 1;
netif_carrier_off(dev);
db->wait_reset = 0;
db->NIC_capability = 0xf; /* All capability*/
db->PHY_reg4 = 0x1e0;
/* CR6 operation mode decision */
db->cr6_data |= ULI526X_TXTH_256;
db->cr0_data = CR0_DEFAULT;
/* Initialize ULI526X board */
uli526x_init(dev);
/* Active System Interface */
netif_wake_queue(dev);
/* set and active a timer process */
init_timer(&db->timer);
db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
db->timer.data = (unsigned long)dev;
db->timer.function = &uli526x_timer;
add_timer(&db->timer);
return 0;
}
/* Initialize ULI526X board
* Reset ULI526X board
* Initialize TX/Rx descriptor chain structure
* Send the set-up frame
* Enable Tx/Rx machine
*/
static void uli526x_init(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long ioaddr = db->ioaddr;
u8 phy_tmp;
u16 phy_value;
u16 phy_reg_reset;
ULI526X_DBUG(0, "uli526x_init()", 0);
/* Reset M526x MAC controller */
outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */
udelay(100);
outl(db->cr0_data, ioaddr + DCR0);
udelay(5);
/* Phy addr : In some boards,M5261/M5263 phy address != 1 */
db->phy_addr = 1;
for(phy_tmp=0;phy_tmp<32;phy_tmp++)
{
phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add
if(phy_value != 0xffff&&phy_value!=0)
{
db->phy_addr = phy_tmp;
break;
}
}
if(phy_tmp == 32)
printk(KERN_WARNING "Can not find the phy address!!!");
/* Parser SROM and media mode */
db->media_mode = uli526x_media_mode;
/* Phyxcer capability setting */
phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
phy_reg_reset = (phy_reg_reset | 0x8000);
phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
udelay(500);
/* Process Phyxcer Media Mode */
uli526x_set_phyxcer(db);
/* Media Mode Process */
if ( !(db->media_mode & ULI526X_AUTO) )
db->op_mode = db->media_mode; /* Force Mode */
/* Initialize Transmit/Receive decriptor and CR3/4 */
uli526x_descriptor_init(db, ioaddr);
/* Init CR6 to program M526X operation */
update_cr6(db->cr6_data, ioaddr);
/* Send setup frame */
send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
/* Init CR7, interrupt active bit */
db->cr7_data = CR7_DEFAULT;
outl(db->cr7_data, ioaddr + DCR7);
/* Init CR15, Tx jabber and Rx watchdog timer */
outl(db->cr15_data, ioaddr + DCR15);
/* Enable ULI526X Tx/Rx function */
db->cr6_data |= CR6_RXSC | CR6_TXSC;
update_cr6(db->cr6_data, ioaddr);
}
/*
* Hardware start transmission.
* Send a packet to media from the upper layer.
*/
static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
struct tx_desc *txptr;
unsigned long flags;
ULI526X_DBUG(0, "uli526x_start_xmit", 0);
/* Resource flag check */
netif_stop_queue(dev);
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
return 0;
}
spin_lock_irqsave(&db->lock, flags);
/* No Tx resource check, it never happen nromally */
if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
return 1;
}
/* Disable NIC interrupt */
outl(0, dev->base_addr + DCR7);
/* transmit this packet */
txptr = db->tx_insert_ptr;
memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
/* Point to next transmit free descriptor */
db->tx_insert_ptr = txptr->next_tx_desc;
/* Transmit Packet Process */
if ( (db->tx_packet_cnt < TX_DESC_CNT) ) {
txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
db->tx_packet_cnt++; /* Ready to send */
outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
dev->trans_start = jiffies; /* saved time stamp */
}
/* Tx resource check */
if ( db->tx_packet_cnt < TX_FREE_DESC_CNT )
netif_wake_queue(dev);
/* Restore CR7 to enable interrupt */
spin_unlock_irqrestore(&db->lock, flags);
outl(db->cr7_data, dev->base_addr + DCR7);
/* free this SKB */
dev_kfree_skb(skb);
return 0;
}
/*
* Stop the interface.
* The interface is stopped when it is brought.
*/
static int uli526x_stop(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
ULI526X_DBUG(0, "uli526x_stop", 0);
/* disable system */
netif_stop_queue(dev);
/* deleted timer */
del_timer_sync(&db->timer);
/* Reset & stop ULI526X board */
outl(ULI526X_RESET, ioaddr + DCR0);
udelay(5);
phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
/* free interrupt */
free_irq(dev->irq, dev);
/* free allocated rx buffer */
uli526x_free_rxbuffer(db);
#if 0
/* show statistic counter */
printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
db->tx_fifo_underrun, db->tx_excessive_collision,
db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
db->reset_fatal, db->reset_TXtimeout);
#endif
return 0;
}
/*
* M5261/M5263 insterrupt handler
* receive the packet to upper layer, free the transmitted packet
*/
static irqreturn_t uli526x_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
unsigned long flags;
if (!dev) {
ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0);
return IRQ_NONE;
}
spin_lock_irqsave(&db->lock, flags);
outl(0, ioaddr + DCR7);
/* Got ULI526X status */
db->cr5_data = inl(ioaddr + DCR5);
outl(db->cr5_data, ioaddr + DCR5);
if ( !(db->cr5_data & 0x180c1) ) {
spin_unlock_irqrestore(&db->lock, flags);
outl(db->cr7_data, ioaddr + DCR7);
return IRQ_HANDLED;
}
/* Check system status */
if (db->cr5_data & 0x2000) {
/* system bus error happen */
ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
db->reset_fatal++;
db->wait_reset = 1; /* Need to RESET */
spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
/* Received the coming packet */
if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
uli526x_rx_packet(dev, db);
/* reallocate rx descriptor buffer */
if (db->rx_avail_cnt<RX_DESC_CNT)
allocate_rx_buffer(db);
/* Free the transmitted descriptor */
if ( db->cr5_data & 0x01)
uli526x_free_tx_pkt(dev, db);
/* Restore CR7 to enable interrupt mask */
outl(db->cr7_data, ioaddr + DCR7);
spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
/*
* Free TX resource after TX complete
*/
static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db)
{
struct tx_desc *txptr;
u32 tdes0;
txptr = db->tx_remove_ptr;
while(db->tx_packet_cnt) {
tdes0 = le32_to_cpu(txptr->tdes0);
/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
if (tdes0 & 0x80000000)
break;
/* A packet sent completed */
db->tx_packet_cnt--;
db->stats.tx_packets++;
/* Transmit statistic counter */
if ( tdes0 != 0x7fffffff ) {
/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
db->stats.collisions += (tdes0 >> 3) & 0xf;
db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
if (tdes0 & TDES0_ERR_MASK) {
db->stats.tx_errors++;
if (tdes0 & 0x0002) { /* UnderRun */
db->tx_fifo_underrun++;
if ( !(db->cr6_data & CR6_SFT) ) {
db->cr6_data = db->cr6_data | CR6_SFT;
update_cr6(db->cr6_data, db->ioaddr);
}
}
if (tdes0 & 0x0100)
db->tx_excessive_collision++;
if (tdes0 & 0x0200)
db->tx_late_collision++;
if (tdes0 & 0x0400)
db->tx_no_carrier++;
if (tdes0 & 0x0800)
db->tx_loss_carrier++;
if (tdes0 & 0x4000)
db->tx_jabber_timeout++;
}
}
txptr = txptr->next_tx_desc;
}/* End of while */
/* Update TX remove pointer to next */
db->tx_remove_ptr = txptr;
/* Resource available check */
if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT )
netif_wake_queue(dev); /* Active upper layer, send again */
}
/*
* Receive the come packet and pass to upper layer
*/
static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db)
{
struct rx_desc *rxptr;
struct sk_buff *skb;
int rxlen;
u32 rdes0;
rxptr = db->rx_ready_ptr;
while(db->rx_avail_cnt) {
rdes0 = le32_to_cpu(rxptr->rdes0);
if (rdes0 & 0x80000000) /* packet owner check */
{
break;
}
db->rx_avail_cnt--;
db->interval_rx_cnt++;
pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
if ( (rdes0 & 0x300) != 0x300) {
/* A packet without First/Last flag */
/* reuse this SKB */
ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
} else {
/* A packet with First/Last flag */
rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
/* error summary bit check */
if (rdes0 & 0x8000) {
/* This is a error packet */
//printk(DRV_NAME ": rdes0: %lx\n", rdes0);
db->stats.rx_errors++;
if (rdes0 & 1)
db->stats.rx_fifo_errors++;
if (rdes0 & 2)
db->stats.rx_crc_errors++;
if (rdes0 & 0x80)
db->stats.rx_length_errors++;
}
if ( !(rdes0 & 0x8000) ||
((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
skb = rxptr->rx_skb_ptr;
/* Good packet, send to upper layer */
/* Shorst packet used new SKB */
if ( (rxlen < RX_COPY_SIZE) &&
( (skb = dev_alloc_skb(rxlen + 2) )
!= NULL) ) {
/* size less than COPY_SIZE, allocate a rxlen SKB */
skb->dev = dev;
skb_reserve(skb, 2); /* 16byte align */
memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
} else {
skb->dev = dev;
skb_put(skb, rxlen);
}
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
db->stats.rx_packets++;
db->stats.rx_bytes += rxlen;
} else {
/* Reuse SKB buffer when the packet is error */
ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
}
}
rxptr = rxptr->next_rx_desc;
}
db->rx_ready_ptr = rxptr;
}
/*
* Get statistics from driver.
*/
static struct net_device_stats * uli526x_get_stats(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
ULI526X_DBUG(0, "uli526x_get_stats", 0);
return &db->stats;
}
/*
* Set ULI526X multicast address
*/
static void uli526x_set_filter_mode(struct net_device * dev)
{
struct uli526x_board_info *db = dev->priv;
unsigned long flags;
ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
spin_lock_irqsave(&db->lock, flags);
if (dev->flags & IFF_PROMISC) {
ULI526X_DBUG(0, "Enable PROM Mode", 0);
db->cr6_data |= CR6_PM | CR6_PBF;
update_cr6(db->cr6_data, db->ioaddr);
spin_unlock_irqrestore(&db->lock, flags);
return;
}
if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
db->cr6_data &= ~(CR6_PM | CR6_PBF);
db->cr6_data |= CR6_PAM;
spin_unlock_irqrestore(&db->lock, flags);
return;
}
ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
spin_unlock_irqrestore(&db->lock, flags);
}
static void
ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
{
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_MII);
ecmd->advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_Autoneg |
ADVERTISED_MII);
ecmd->port = PORT_MII;
ecmd->phy_address = db->phy_addr;
ecmd->transceiver = XCVR_EXTERNAL;
ecmd->speed = 10;
ecmd->duplex = DUPLEX_HALF;
if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
{
ecmd->speed = 100;
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
ecmd->duplex = DUPLEX_FULL;
}
if(db->link_failed)
{
ecmd->speed = -1;
ecmd->duplex = -1;
}
if (db->media_mode & ULI526X_AUTO)
{
ecmd->autoneg = AUTONEG_ENABLE;
}
}
static void netdev_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct uli526x_board_info *np = netdev_priv(dev);
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
if (np->pdev)
strcpy(info->bus_info, pci_name(np->pdev));
else
sprintf(info->bus_info, "EISA 0x%lx %d",
dev->base_addr, dev->irq);
}
static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
struct uli526x_board_info *np = netdev_priv(dev);
ULi_ethtool_gset(np, cmd);
return 0;
}
static u32 netdev_get_link(struct net_device *dev) {
struct uli526x_board_info *np = netdev_priv(dev);
if(np->link_failed)
return 0;
else
return 1;
}
static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
wol->supported = WAKE_PHY | WAKE_MAGIC;
wol->wolopts = 0;
}
static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
.get_settings = netdev_get_settings,
.get_link = netdev_get_link,
.get_wol = uli526x_get_wol,
};
/*
* A periodic timer routine
* Dynamic media sense, allocate Rx buffer...
*/
static void uli526x_timer(unsigned long data)
{
u32 tmp_cr8;
unsigned char tmp_cr12=0;
struct net_device *dev = (struct net_device *) data;
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long flags;
u8 TmpSpeed=10;
//ULI526X_DBUG(0, "uli526x_timer()", 0);
spin_lock_irqsave(&db->lock, flags);
/* Dynamic reset ULI526X : system error or transmit time-out */
tmp_cr8 = inl(db->ioaddr + DCR8);
if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
db->reset_cr8++;
db->wait_reset = 1;
}
db->interval_rx_cnt = 0;
/* TX polling kick monitor */
if ( db->tx_packet_cnt &&
time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) {
outl(0x1, dev->base_addr + DCR1); // Tx polling again
// TX Timeout
if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) {
db->reset_TXtimeout++;
db->wait_reset = 1;
printk( "%s: Tx timeout - resetting\n",
dev->name);
}
}
if (db->wait_reset) {
ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
db->reset_count++;
uli526x_dynamic_reset(dev);
db->timer.expires = ULI526X_TIMER_WUT;
add_timer(&db->timer);
spin_unlock_irqrestore(&db->lock, flags);
return;
}
/* Link status check, Dynamic media type change */
if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0)
tmp_cr12 = 3;
if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
/* Link Failed */
ULI526X_DBUG(0, "Link Failed", tmp_cr12);
netif_carrier_off(dev);
printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
db->link_failed = 1;
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
/* AUTO don't need */
if ( !(db->media_mode & 0x8) )
phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
/* AUTO mode, if INT phyxcer link failed, select EXT device */
if (db->media_mode & ULI526X_AUTO) {
db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
update_cr6(db->cr6_data, db->ioaddr);
}
} else
if ((tmp_cr12 & 0x3) && db->link_failed) {
ULI526X_DBUG(0, "Link link OK", tmp_cr12);
db->link_failed = 0;
/* Auto Sense Speed */
if ( (db->media_mode & ULI526X_AUTO) &&
uli526x_sense_speed(db) )
db->link_failed = 1;
uli526x_process_mode(db);
if(db->link_failed==0)
{
if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
{
TmpSpeed = 100;
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
}
else
{
printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
}
netif_carrier_on(dev);
}
/* SHOW_MEDIA_TYPE(db->op_mode); */
}
else if(!(tmp_cr12 & 0x3) && db->link_failed)
{
if(db->init==1)
{
printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
netif_carrier_off(dev);
}
}
db->init=0;
/* Timer active again */
db->timer.expires = ULI526X_TIMER_WUT;
add_timer(&db->timer);
spin_unlock_irqrestore(&db->lock, flags);
}
/*
* Dynamic reset the ULI526X board
* Stop ULI526X board
* Free Tx/Rx allocated memory
* Reset ULI526X board
* Re-initialize ULI526X board
*/
static void uli526x_dynamic_reset(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
/* Sopt MAC controller */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
update_cr6(db->cr6_data, dev->base_addr);
outl(0, dev->base_addr + DCR7); /* Disable Interrupt */
outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
/* Disable upper layer interface */
netif_stop_queue(dev);
/* Free Rx Allocate buffer */
uli526x_free_rxbuffer(db);
/* system variable init */
db->tx_packet_cnt = 0;
db->rx_avail_cnt = 0;
db->link_failed = 1;
db->init=1;
db->wait_reset = 0;
/* Re-initialize ULI526X board */
uli526x_init(dev);
/* Restart upper layer interface */
netif_wake_queue(dev);
}
/*
* free all allocated rx buffer
*/
static void uli526x_free_rxbuffer(struct uli526x_board_info * db)
{
ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
/* free allocated rx buffer */
while (db->rx_avail_cnt) {
dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
db->rx_avail_cnt--;
}
}
/*
* Reuse the SK buffer
*/
static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb)
{
struct rx_desc *rxptr = db->rx_insert_ptr;
if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
rxptr->rx_skb_ptr = skb;
rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
db->rx_avail_cnt++;
db->rx_insert_ptr = rxptr->next_rx_desc;
} else
ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
}
/*
* Initialize transmit/Receive descriptor
* Using Chain structure, and allocate Tx/Rx buffer
*/
static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr)
{
struct tx_desc *tmp_tx;
struct rx_desc *tmp_rx;
unsigned char *tmp_buf;
dma_addr_t tmp_tx_dma, tmp_rx_dma;
dma_addr_t tmp_buf_dma;
int i;
ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
/* tx descriptor start pointer */
db->tx_insert_ptr = db->first_tx_desc;
db->tx_remove_ptr = db->first_tx_desc;
outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
/* rx descriptor start pointer */
db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
db->rx_insert_ptr = db->first_rx_desc;
db->rx_ready_ptr = db->first_rx_desc;
outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
/* Init Transmit chain */
tmp_buf = db->buf_pool_start;
tmp_buf_dma = db->buf_pool_dma_start;
tmp_tx_dma = db->first_tx_desc_dma;
for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
tmp_tx->tx_buf_ptr = tmp_buf;
tmp_tx->tdes0 = cpu_to_le32(0);
tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
tmp_tx_dma += sizeof(struct tx_desc);
tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
tmp_tx->next_tx_desc = tmp_tx + 1;
tmp_buf = tmp_buf + TX_BUF_ALLOC;
tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
}
(--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
tmp_tx->next_tx_desc = db->first_tx_desc;
/* Init Receive descriptor chain */
tmp_rx_dma=db->first_rx_desc_dma;
for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
tmp_rx->rdes0 = cpu_to_le32(0);
tmp_rx->rdes1 = cpu_to_le32(0x01000600);
tmp_rx_dma += sizeof(struct rx_desc);
tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
tmp_rx->next_rx_desc = tmp_rx + 1;
}
(--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
tmp_rx->next_rx_desc = db->first_rx_desc;
/* pre-allocate Rx buffer */
allocate_rx_buffer(db);
}
/*
* Update CR6 value
* Firstly stop ULI526X, then written value and start
*/
static void update_cr6(u32 cr6_data, unsigned long ioaddr)
{
outl(cr6_data, ioaddr + DCR6);
udelay(5);
}
/*
* Send a setup frame for M5261/M5263
* This setup frame initialize ULI526X address filter mode
*/
static void send_filter_frame(struct net_device *dev, int mc_cnt)
{
struct uli526x_board_info *db = netdev_priv(dev);
struct dev_mc_list *mcptr;
struct tx_desc *txptr;
u16 * addrptr;
u32 * suptr;
int i;
ULI526X_DBUG(0, "send_filter_frame()", 0);
txptr = db->tx_insert_ptr;
suptr = (u32 *) txptr->tx_buf_ptr;
/* Node address */
addrptr = (u16 *) dev->dev_addr;
*suptr++ = addrptr[0];
*suptr++ = addrptr[1];
*suptr++ = addrptr[2];
/* broadcast address */
*suptr++ = 0xffff;
*suptr++ = 0xffff;
*suptr++ = 0xffff;
/* fit the multicast address */
for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
addrptr = (u16 *) mcptr->dmi_addr;
*suptr++ = addrptr[0];
*suptr++ = addrptr[1];
*suptr++ = addrptr[2];
}
for (; i<14; i++) {
*suptr++ = 0xffff;
*suptr++ = 0xffff;
*suptr++ = 0xffff;
}
/* prepare the setup frame */
db->tx_insert_ptr = txptr->next_tx_desc;
txptr->tdes1 = cpu_to_le32(0x890000c0);
/* Resource Check and Send the setup packet */
if (db->tx_packet_cnt < TX_DESC_CNT) {
/* Resource Empty */
db->tx_packet_cnt++;
txptr->tdes0 = cpu_to_le32(0x80000000);
update_cr6(db->cr6_data | 0x2000, dev->base_addr);
outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
update_cr6(db->cr6_data, dev->base_addr);
dev->trans_start = jiffies;
} else
printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
}
/*
* Allocate rx buffer,
* As possible as allocate maxiumn Rx buffer
*/
static void allocate_rx_buffer(struct uli526x_board_info *db)
{
struct rx_desc *rxptr;
struct sk_buff *skb;
rxptr = db->rx_insert_ptr;
while(db->rx_avail_cnt < RX_DESC_CNT) {
if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
break;
rxptr->rx_skb_ptr = skb; /* FIXME (?) */
rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
wmb();
rxptr->rdes0 = cpu_to_le32(0x80000000);
rxptr = rxptr->next_rx_desc;
db->rx_avail_cnt++;
}
db->rx_insert_ptr = rxptr;
}
/*
* Read one word data from the serial ROM
*/
static u16 read_srom_word(long ioaddr, int offset)
{
int i;
u16 srom_data = 0;
long cr9_ioaddr = ioaddr + DCR9;
outl(CR9_SROM_READ, cr9_ioaddr);
outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
/* Send the Read Command 110b */
SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
/* Send the offset */
for (i = 5; i >= 0; i--) {
srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
SROM_CLK_WRITE(srom_data, cr9_ioaddr);
}
outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
for (i = 16; i > 0; i--) {
outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
udelay(5);
srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
udelay(5);
}
outl(CR9_SROM_READ, cr9_ioaddr);
return srom_data;
}
/*
* Auto sense the media mode
*/
static u8 uli526x_sense_speed(struct uli526x_board_info * db)
{
u8 ErrFlag = 0;
u16 phy_mode;
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
if ( (phy_mode & 0x24) == 0x24 ) {
phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
if(phy_mode&0x8000)
phy_mode = 0x8000;
else if(phy_mode&0x4000)
phy_mode = 0x4000;
else if(phy_mode&0x2000)
phy_mode = 0x2000;
else
phy_mode = 0x1000;
/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
switch (phy_mode) {
case 0x1000: db->op_mode = ULI526X_10MHF; break;
case 0x2000: db->op_mode = ULI526X_10MFD; break;
case 0x4000: db->op_mode = ULI526X_100MHF; break;
case 0x8000: db->op_mode = ULI526X_100MFD; break;
default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break;
}
} else {
db->op_mode = ULI526X_10MHF;
ULI526X_DBUG(0, "Link Failed :", phy_mode);
ErrFlag = 1;
}
return ErrFlag;
}
/*
* Set 10/100 phyxcer capability
* AUTO mode : phyxcer register4 is NIC capability
* Force mode: phyxcer register4 is the force media
*/
static void uli526x_set_phyxcer(struct uli526x_board_info *db)
{
u16 phy_reg;
/* Phyxcer capability setting */
phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
if (db->media_mode & ULI526X_AUTO) {
/* AUTO Mode */
phy_reg |= db->PHY_reg4;
} else {
/* Force Mode */
switch(db->media_mode) {
case ULI526X_10MHF: phy_reg |= 0x20; break;
case ULI526X_10MFD: phy_reg |= 0x40; break;
case ULI526X_100MHF: phy_reg |= 0x80; break;
case ULI526X_100MFD: phy_reg |= 0x100; break;
}
}
/* Write new capability to Phyxcer Reg4 */
if ( !(phy_reg & 0x01e0)) {
phy_reg|=db->PHY_reg4;
db->media_mode|=ULI526X_AUTO;
}
phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
/* Restart Auto-Negotiation */
phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
udelay(50);
}
/*
* Process op-mode
AUTO mode : PHY controller in Auto-negotiation Mode
* Force mode: PHY controller in force mode with HUB
* N-way force capability with SWITCH
*/
static void uli526x_process_mode(struct uli526x_board_info *db)
{
u16 phy_reg;
/* Full Duplex Mode Check */
if (db->op_mode & 0x4)
db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */
else
db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */
update_cr6(db->cr6_data, db->ioaddr);
/* 10/100M phyxcer force mode need */
if ( !(db->media_mode & 0x8)) {
/* Forece Mode */
phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
if ( !(phy_reg & 0x1) ) {
/* parter without N-Way capability */
phy_reg = 0x0;
switch(db->op_mode) {
case ULI526X_10MHF: phy_reg = 0x0; break;
case ULI526X_10MFD: phy_reg = 0x100; break;
case ULI526X_100MHF: phy_reg = 0x2000; break;
case ULI526X_100MFD: phy_reg = 0x2100; break;
}
phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
}
}
}
/*
* Write a word to Phy register
*/
static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
{
u16 i;
unsigned long ioaddr;
if(chip_id == PCI_ULI5263_ID)
{
phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
return;
}
/* M5261/M5263 Chip */
ioaddr = iobase + DCR9;
/* Send 33 synchronization clock to Phy controller */
for (i = 0; i < 35; i++)
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send start command(01) to Phy */
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send write command(01) to Phy */
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send Phy address */
for (i = 0x10; i > 0; i = i >> 1)
phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
/* Send register address */
for (i = 0x10; i > 0; i = i >> 1)
phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
/* written trasnition */
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
/* Write a word data to PHY controller */
for ( i = 0x8000; i > 0; i >>= 1)
phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
}
/*
* Read a word data from phy register
*/
static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
{
int i;
u16 phy_data;
unsigned long ioaddr;
if(chip_id == PCI_ULI5263_ID)
return phy_readby_cr10(iobase, phy_addr, offset);
/* M5261/M5263 Chip */
ioaddr = iobase + DCR9;
/* Send 33 synchronization clock to Phy controller */
for (i = 0; i < 35; i++)
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send start command(01) to Phy */
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
/* Send read command(10) to Phy */
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
/* Send Phy address */
for (i = 0x10; i > 0; i = i >> 1)
phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
/* Send register address */
for (i = 0x10; i > 0; i = i >> 1)
phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
/* Skip transition state */
phy_read_1bit(ioaddr, chip_id);
/* read 16bit data */
for (phy_data = 0, i = 0; i < 16; i++) {
phy_data <<= 1;
phy_data |= phy_read_1bit(ioaddr, chip_id);
}
return phy_data;
}
static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
{
unsigned long ioaddr,cr10_value;
ioaddr = iobase + DCR10;
cr10_value = phy_addr;
cr10_value = (cr10_value<<5) + offset;
cr10_value = (cr10_value<<16) + 0x08000000;
outl(cr10_value,ioaddr);
udelay(1);
while(1)
{
cr10_value = inl(ioaddr);
if(cr10_value&0x10000000)
break;
}
return (cr10_value&0x0ffff);
}
static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
{
unsigned long ioaddr,cr10_value;
ioaddr = iobase + DCR10;
cr10_value = phy_addr;
cr10_value = (cr10_value<<5) + offset;
cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
outl(cr10_value,ioaddr);
udelay(1);
}
/*
* Write one bit data to Phy Controller
*/
static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
{
outl(phy_data , ioaddr); /* MII Clock Low */
udelay(1);
outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
udelay(1);
outl(phy_data , ioaddr); /* MII Clock Low */
udelay(1);
}
/*
* Read one bit phy data from PHY controller
*/
static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
{
u16 phy_data;
outl(0x50000 , ioaddr);
udelay(1);
phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
outl(0x40000 , ioaddr);
udelay(1);
return phy_data;
}
static struct pci_device_id uli526x_pci_tbl[] = {
{ 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
{ 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
static struct pci_driver uli526x_driver = {
.name = "uli526x",
.id_table = uli526x_pci_tbl,
.probe = uli526x_init_one,
.remove = __devexit_p(uli526x_remove_one),
};
MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");
MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
MODULE_LICENSE("GPL");
module_param(debug, int, 0644);
module_param(mode, int, 0);
module_param(cr6set, int, 0);
MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
/* Description:
* when user used insmod to add module, system invoked init_module()
* to register the services.
*/
static int __init uli526x_init_module(void)
{
printk(version);
printed_version = 1;
ULI526X_DBUG(0, "init_module() ", debug);
if (debug)
uli526x_debug = debug; /* set debug flag */
if (cr6set)
uli526x_cr6_user_set = cr6set;
switch (mode) {
case ULI526X_10MHF:
case ULI526X_100MHF:
case ULI526X_10MFD:
case ULI526X_100MFD:
uli526x_media_mode = mode;
break;
default:
uli526x_media_mode = ULI526X_AUTO;
break;
}
return pci_register_driver(&uli526x_driver);
}
/*
* Description:
* when user used rmmod to delete module, system invoked clean_module()
* to un-register all registered services.
*/
static void __exit uli526x_cleanup_module(void)
{
ULI526X_DBUG(0, "uli526x_clean_module() ", debug);
pci_unregister_driver(&uli526x_driver);
}
module_init(uli526x_init_module);
module_exit(uli526x_cleanup_module);
Reference in New Issue View Git Blame Copy Permalink