cf11052a95
This patch fixes power LED blinking and power-off on DNS-323 rev. B1. GPIO pin 3 has to be set to 1 to stop power LED blinking and to allow the LED to be controlled via leds-gpio. This pin has to be also set to 1 for power-off to work. To power-off the rev. B1 machine, pin 8 has to be set to 1 and then set to 0 to do actual power-off. Tested on my DNS-323 rev. B1 Signed-off-by: Erik Benada <erikbenada@yahoo.ca> Signed-off-by: Nicolas Pitre <nico@marvell.com> |
||
|---|---|---|
| .. | ||
| include/mach | ||
| addr-map.c | ||
| common.c | ||
| common.h | ||
| d2net-setup.c | ||
| db88f5281-setup.c | ||
| dns323-setup.c | ||
| edmini_v2-setup.c | ||
| irq.c | ||
| Kconfig | ||
| kurobox_pro-setup.c | ||
| lsmini-setup.c | ||
| Makefile | ||
| Makefile.boot | ||
| mpp.c | ||
| mpp.h | ||
| mss2-setup.c | ||
| mv2120-setup.c | ||
| net2big-setup.c | ||
| pci.c | ||
| rd88f5181l-fxo-setup.c | ||
| rd88f5181l-ge-setup.c | ||
| rd88f5182-setup.c | ||
| rd88f6183ap-ge-setup.c | ||
| terastation_pro2-setup.c | ||
| ts78xx-fpga.h | ||
| ts78xx-setup.c | ||
| ts209-setup.c | ||
| ts409-setup.c | ||
| tsx09-common.c | ||
| tsx09-common.h | ||
| wnr854t-setup.c | ||
| wrt350n-v2-setup.c | ||