a09e64fbc0
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
565 lines
12 KiB
C
565 lines
12 KiB
C
/*
|
|
* Support for CompuLab EM-X270 platform
|
|
*
|
|
* Copyright (C) 2007, 2008 CompuLab, Ltd.
|
|
* Author: Mike Rapoport <mike@compulab.co.il>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/dm9000.h>
|
|
#include <linux/rtc-v3020.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/input.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <mach/mfp-pxa27x.h>
|
|
#include <mach/pxa-regs.h>
|
|
#include <mach/pxa27x-udc.h>
|
|
#include <mach/audio.h>
|
|
#include <mach/pxafb.h>
|
|
#include <mach/ohci.h>
|
|
#include <mach/mmc.h>
|
|
#include <mach/pxa27x_keypad.h>
|
|
|
|
#include "generic.h"
|
|
|
|
/* GPIO IRQ usage */
|
|
#define GPIO41_ETHIRQ (41)
|
|
#define GPIO13_MMC_CD (13)
|
|
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
|
|
#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
|
|
|
|
/* NAND control GPIOs */
|
|
#define GPIO11_NAND_CS (11)
|
|
#define GPIO56_NAND_RB (56)
|
|
|
|
static unsigned long em_x270_pin_config[] = {
|
|
/* AC'97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO98_AC97_SYSCLK,
|
|
GPIO113_AC97_nRESET,
|
|
|
|
/* BTUART */
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
/* STUART */
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
/* MCI controller */
|
|
GPIO32_MMC_CLK,
|
|
GPIO112_MMC_CMD,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
|
|
/* LCD */
|
|
GPIO58_LCD_LDD_0,
|
|
GPIO59_LCD_LDD_1,
|
|
GPIO60_LCD_LDD_2,
|
|
GPIO61_LCD_LDD_3,
|
|
GPIO62_LCD_LDD_4,
|
|
GPIO63_LCD_LDD_5,
|
|
GPIO64_LCD_LDD_6,
|
|
GPIO65_LCD_LDD_7,
|
|
GPIO66_LCD_LDD_8,
|
|
GPIO67_LCD_LDD_9,
|
|
GPIO68_LCD_LDD_10,
|
|
GPIO69_LCD_LDD_11,
|
|
GPIO70_LCD_LDD_12,
|
|
GPIO71_LCD_LDD_13,
|
|
GPIO72_LCD_LDD_14,
|
|
GPIO73_LCD_LDD_15,
|
|
GPIO74_LCD_FCLK,
|
|
GPIO75_LCD_LCLK,
|
|
GPIO76_LCD_PCLK,
|
|
GPIO77_LCD_BIAS,
|
|
|
|
/* QCI */
|
|
GPIO84_CIF_FV,
|
|
GPIO25_CIF_LV,
|
|
GPIO53_CIF_MCLK,
|
|
GPIO54_CIF_PCLK,
|
|
GPIO81_CIF_DD_0,
|
|
GPIO55_CIF_DD_1,
|
|
GPIO51_CIF_DD_2,
|
|
GPIO50_CIF_DD_3,
|
|
GPIO52_CIF_DD_4,
|
|
GPIO48_CIF_DD_5,
|
|
GPIO17_CIF_DD_6,
|
|
GPIO12_CIF_DD_7,
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
|
|
/* Keypad */
|
|
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
|
|
GPIO103_KP_MKOUT_0,
|
|
GPIO104_KP_MKOUT_1,
|
|
GPIO105_KP_MKOUT_2,
|
|
GPIO106_KP_MKOUT_3,
|
|
GPIO107_KP_MKOUT_4,
|
|
GPIO108_KP_MKOUT_5,
|
|
GPIO96_KP_MKOUT_6,
|
|
GPIO22_KP_MKOUT_7,
|
|
|
|
/* SSP1 */
|
|
GPIO26_SSP1_RXD,
|
|
GPIO23_SSP1_SCLK,
|
|
GPIO24_SSP1_SFRM,
|
|
GPIO57_SSP1_TXD,
|
|
|
|
/* SSP2 */
|
|
GPIO19_SSP2_SCLK,
|
|
GPIO14_SSP2_SFRM,
|
|
GPIO89_SSP2_TXD,
|
|
GPIO88_SSP2_RXD,
|
|
|
|
/* SDRAM and local bus */
|
|
GPIO15_nCS_1,
|
|
GPIO78_nCS_2,
|
|
GPIO79_nCS_3,
|
|
GPIO80_nCS_4,
|
|
GPIO49_nPWE,
|
|
GPIO18_RDY,
|
|
|
|
/* GPIO */
|
|
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
|
|
|
/* power controls */
|
|
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
|
|
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
|
|
|
|
/* NAND controls */
|
|
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
|
|
GPIO56_GPIO, /* NAND Ready/Busy */
|
|
|
|
/* interrupts */
|
|
GPIO13_GPIO, /* MMC card detect */
|
|
GPIO41_GPIO, /* DM9000 interrupt */
|
|
};
|
|
|
|
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
|
|
static struct resource em_x270_dm9000_resource[] = {
|
|
[0] = {
|
|
.start = PXA_CS2_PHYS,
|
|
.end = PXA_CS2_PHYS + 3,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = PXA_CS2_PHYS + 8,
|
|
.end = PXA_CS2_PHYS + 8 + 0x3f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = EM_X270_ETHIRQ,
|
|
.end = EM_X270_ETHIRQ,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct dm9000_plat_data em_x270_dm9000_platdata = {
|
|
.flags = DM9000_PLATF_32BITONLY,
|
|
};
|
|
|
|
static struct platform_device em_x270_dm9000 = {
|
|
.name = "dm9000",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
|
|
.resource = em_x270_dm9000_resource,
|
|
.dev = {
|
|
.platform_data = &em_x270_dm9000_platdata,
|
|
}
|
|
};
|
|
|
|
static void __init em_x270_init_dm9000(void)
|
|
{
|
|
platform_device_register(&em_x270_dm9000);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_dm9000(void) {}
|
|
#endif
|
|
|
|
/* V3020 RTC */
|
|
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
|
|
static struct resource em_x270_v3020_resource[] = {
|
|
[0] = {
|
|
.start = PXA_CS4_PHYS,
|
|
.end = PXA_CS4_PHYS + 3,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct v3020_platform_data em_x270_v3020_platdata = {
|
|
.leftshift = 0,
|
|
};
|
|
|
|
static struct platform_device em_x270_rtc = {
|
|
.name = "v3020",
|
|
.num_resources = ARRAY_SIZE(em_x270_v3020_resource),
|
|
.resource = em_x270_v3020_resource,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &em_x270_v3020_platdata,
|
|
}
|
|
};
|
|
|
|
static void __init em_x270_init_rtc(void)
|
|
{
|
|
platform_device_register(&em_x270_rtc);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_rtc(void) {}
|
|
#endif
|
|
|
|
/* NAND flash */
|
|
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
static inline void nand_cs_on(void)
|
|
{
|
|
gpio_set_value(GPIO11_NAND_CS, 0);
|
|
}
|
|
|
|
static void nand_cs_off(void)
|
|
{
|
|
dsb();
|
|
|
|
gpio_set_value(GPIO11_NAND_CS, 1);
|
|
}
|
|
|
|
/* hardware specific access to control-lines */
|
|
static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
|
|
unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
|
|
|
|
dsb();
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
if (ctrl & NAND_ALE)
|
|
nandaddr |= (1 << 3);
|
|
else
|
|
nandaddr &= ~(1 << 3);
|
|
if (ctrl & NAND_CLE)
|
|
nandaddr |= (1 << 2);
|
|
else
|
|
nandaddr &= ~(1 << 2);
|
|
if (ctrl & NAND_NCE)
|
|
nand_cs_on();
|
|
else
|
|
nand_cs_off();
|
|
}
|
|
|
|
dsb();
|
|
this->IO_ADDR_W = (void __iomem *)nandaddr;
|
|
if (dat != NAND_CMD_NONE)
|
|
writel(dat, this->IO_ADDR_W);
|
|
|
|
dsb();
|
|
}
|
|
|
|
/* read device ready pin */
|
|
static int em_x270_nand_device_ready(struct mtd_info *mtd)
|
|
{
|
|
dsb();
|
|
|
|
return gpio_get_value(GPIO56_NAND_RB);
|
|
}
|
|
|
|
static struct mtd_partition em_x270_partition_info[] = {
|
|
[0] = {
|
|
.name = "em_x270-0",
|
|
.offset = 0,
|
|
.size = SZ_4M,
|
|
},
|
|
[1] = {
|
|
.name = "em_x270-1",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL
|
|
},
|
|
};
|
|
|
|
static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
|
|
|
|
struct platform_nand_data em_x270_nand_platdata = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.chip_offset = 0,
|
|
.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
|
|
.partitions = em_x270_partition_info,
|
|
.chip_delay = 20,
|
|
.part_probe_types = em_x270_part_probes,
|
|
},
|
|
.ctrl = {
|
|
.hwcontrol = 0,
|
|
.dev_ready = em_x270_nand_device_ready,
|
|
.select_chip = 0,
|
|
.cmd_ctrl = em_x270_nand_cmd_ctl,
|
|
},
|
|
};
|
|
|
|
static struct resource em_x270_nand_resource[] = {
|
|
[0] = {
|
|
.start = PXA_CS1_PHYS,
|
|
.end = PXA_CS1_PHYS + 12,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device em_x270_nand = {
|
|
.name = "gen_nand",
|
|
.num_resources = ARRAY_SIZE(em_x270_nand_resource),
|
|
.resource = em_x270_nand_resource,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &em_x270_nand_platdata,
|
|
}
|
|
};
|
|
|
|
static void __init em_x270_init_nand(void)
|
|
{
|
|
int err;
|
|
|
|
err = gpio_request(GPIO11_NAND_CS, "NAND CS");
|
|
if (err) {
|
|
pr_warning("EM-X270: failed to request NAND CS gpio\n");
|
|
return;
|
|
}
|
|
|
|
gpio_direction_output(GPIO11_NAND_CS, 1);
|
|
|
|
err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
|
|
if (err) {
|
|
pr_warning("EM-X270: failed to request NAND R/B gpio\n");
|
|
gpio_free(GPIO11_NAND_CS);
|
|
return;
|
|
}
|
|
|
|
gpio_direction_input(GPIO56_NAND_RB);
|
|
|
|
platform_device_register(&em_x270_nand);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_nand(void) {}
|
|
#endif
|
|
|
|
/* PXA27x OHCI controller setup */
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
static int em_x270_ohci_init(struct device *dev)
|
|
{
|
|
/* Set the Power Control Polarity Low */
|
|
UHCHR = (UHCHR | UHCHR_PCPL) &
|
|
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
|
|
|
|
/* enable port 2 transiever */
|
|
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pxaohci_platform_data em_x270_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.init = em_x270_ohci_init,
|
|
};
|
|
|
|
static void __init em_x270_init_ohci(void)
|
|
{
|
|
pxa_set_ohci_info(&em_x270_ohci_platform_data);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_ohci(void) {}
|
|
#endif
|
|
|
|
/* MCI controller setup */
|
|
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
|
|
static int em_x270_mci_init(struct device *dev,
|
|
irq_handler_t em_x270_detect_int,
|
|
void *data)
|
|
{
|
|
int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
|
|
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
|
|
"MMC card detect", data);
|
|
if (err) {
|
|
printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
|
|
__func__, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
/*
|
|
FIXME: current hardware implementation does not allow to
|
|
enable/disable MMC power. This will be fixed in next HW releases,
|
|
and we'll need to add implmentation here.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
static void em_x270_mci_exit(struct device *dev, void *data)
|
|
{
|
|
int irq = gpio_to_irq(GPIO13_MMC_CD);
|
|
free_irq(irq, data);
|
|
}
|
|
|
|
static struct pxamci_platform_data em_x270_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
|
|
.init = em_x270_mci_init,
|
|
.setpower = em_x270_mci_setpower,
|
|
.exit = em_x270_mci_exit,
|
|
};
|
|
|
|
static void __init em_x270_init_mmc(void)
|
|
{
|
|
pxa_set_mci_info(&em_x270_mci_platform_data);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_mmc(void) {}
|
|
#endif
|
|
|
|
/* LCD 480x640 */
|
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
|
static struct pxafb_mode_info em_x270_lcd_mode = {
|
|
.pixclock = 50000,
|
|
.bpp = 16,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.hsync_len = 8,
|
|
.vsync_len = 2,
|
|
.left_margin = 8,
|
|
.upper_margin = 0,
|
|
.right_margin = 24,
|
|
.lower_margin = 4,
|
|
.cmap_greyscale = 0,
|
|
};
|
|
|
|
static struct pxafb_mach_info em_x270_lcd = {
|
|
.modes = &em_x270_lcd_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP,
|
|
};
|
|
static void __init em_x270_init_lcd(void)
|
|
{
|
|
set_pxa_fb_info(&em_x270_lcd);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_lcd(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
|
|
static void __init em_x270_init_ac97(void)
|
|
{
|
|
pxa_set_ac97_info(NULL);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_ac97(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
|
|
static unsigned int em_x270_matrix_keys[] = {
|
|
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
|
|
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
|
|
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
|
|
};
|
|
|
|
struct pxa27x_keypad_platform_data em_x270_keypad_info = {
|
|
/* code map for the matrix keys */
|
|
.matrix_key_rows = 3,
|
|
.matrix_key_cols = 3,
|
|
.matrix_key_map = em_x270_matrix_keys,
|
|
.matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
|
|
};
|
|
|
|
static void __init em_x270_init_keypad(void)
|
|
{
|
|
pxa_set_keypad_info(&em_x270_keypad_info);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_keypad(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
static struct gpio_keys_button gpio_keys_button[] = {
|
|
[0] = {
|
|
.desc = "sleep/wakeup",
|
|
.code = KEY_SUSPEND,
|
|
.type = EV_PWR,
|
|
.gpio = 1,
|
|
.wakeup = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
|
|
.buttons = gpio_keys_button,
|
|
.nbuttons = 1,
|
|
};
|
|
|
|
static struct platform_device em_x270_gpio_keys = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &em_x270_gpio_keys_data,
|
|
},
|
|
};
|
|
|
|
static void __init em_x270_init_gpio_keys(void)
|
|
{
|
|
platform_device_register(&em_x270_gpio_keys);
|
|
}
|
|
#else
|
|
static inline void em_x270_init_gpio_keys(void) {}
|
|
#endif
|
|
|
|
static void __init em_x270_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
|
|
|
|
em_x270_init_dm9000();
|
|
em_x270_init_rtc();
|
|
em_x270_init_nand();
|
|
em_x270_init_lcd();
|
|
em_x270_init_mmc();
|
|
em_x270_init_ohci();
|
|
em_x270_init_keypad();
|
|
em_x270_init_gpio_keys();
|
|
em_x270_init_ac97();
|
|
}
|
|
|
|
MACHINE_START(EM_X270, "Compulab EM-X270")
|
|
.boot_params = 0xa0000100,
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa27x_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = em_x270_init,
|
|
MACHINE_END
|