android_kernel_xiaomi_sm8350/drivers/char/rio/phb.h
Alan Cox 57c2d60e1e [PATCH] Yet more rio cleaning (1 of 2)
- Remove more unused headers
- Remove various typedefs
- Correct type of PaddrP (physical addresses should be ulong)
- Kill use of bcopy
- More printk cleanups
- Kill true/false
- Clean up direct access to pci BARs

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:29 -08:00

143 lines
5.7 KiB
C

/****************************************************************************
******* *******
******* P H B H E A D E R *******
******* *******
****************************************************************************
Author : Ian Nandhra, Jeremy Rolls
Date :
*
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
Version : 0.01
Mods
----------------------------------------------------------------------------
Date By Description
----------------------------------------------------------------------------
***************************************************************************/
#ifndef _phb_h
#define _phb_h 1
/*************************************************
* Handshake asserted. Deasserted by the LTT(s)
************************************************/
#define PHB_HANDSHAKE_SET ((ushort) 0x001) /* Set by LRT */
#define PHB_HANDSHAKE_RESET ((ushort) 0x002) /* Set by ISR / driver */
#define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET | PHB_HANDSHAKE_SET)
/* Reset by ltt */
/*************************************************
* Maximum number of PHB's
************************************************/
#define MAX_PHB ((ushort) 128) /* range 0-127 */
/*************************************************
* Defines for the mode fields
************************************************/
#define TXPKT_INCOMPLETE 0x0001 /* Previous tx packet not completed */
#define TXINTR_ENABLED 0x0002 /* Tx interrupt is enabled */
#define TX_TAB3 0x0004 /* TAB3 mode */
#define TX_OCRNL 0x0008 /* OCRNL mode */
#define TX_ONLCR 0x0010 /* ONLCR mode */
#define TX_SENDSPACES 0x0020 /* Send n spaces command needs
completing */
#define TX_SENDNULL 0x0040 /* Escaping NULL needs completing */
#define TX_SENDLF 0x0080 /* LF -> CR LF needs completing */
#define TX_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel
port */
#define TX_HANGOVER (TX_SENDSPACES | TX_SENDLF | TX_SENDNULL)
#define TX_DTRFLOW 0x0200 /* DTR tx flow control */
#define TX_DTRFLOWED 0x0400 /* DTR is low - don't allow more data
into the FIFO */
#define TX_DATAINFIFO 0x0800 /* There is data in the FIFO */
#define TX_BUSY 0x1000 /* Data in FIFO, shift or holding regs */
#define RX_SPARE 0x0001 /* SPARE */
#define RXINTR_ENABLED 0x0002 /* Rx interrupt enabled */
#define RX_ICRNL 0x0008 /* ICRNL mode */
#define RX_INLCR 0x0010 /* INLCR mode */
#define RX_IGNCR 0x0020 /* IGNCR mode */
#define RX_CTSFLOW 0x0040 /* CTSFLOW enabled */
#define RX_IXOFF 0x0080 /* IXOFF enabled */
#define RX_CTSFLOWED 0x0100 /* CTSFLOW and CTS dropped */
#define RX_IXOFFED 0x0200 /* IXOFF and xoff sent */
#define RX_BUFFERED 0x0400 /* Try and pass on complete packets */
#define PORT_ISOPEN 0x0001 /* Port open? */
#define PORT_HUPCL 0x0002 /* Hangup on close? */
#define PORT_MOPENPEND 0x0004 /* Modem open pending */
#define PORT_ISPARALLEL 0x0008 /* Parallel port */
#define PORT_BREAK 0x0010 /* Port on break */
#define PORT_STATUSPEND 0x0020 /* Status packet pending */
#define PORT_BREAKPEND 0x0040 /* Break packet pending */
#define PORT_MODEMPEND 0x0080 /* Modem status packet pending */
#define PORT_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel
port */
#define PORT_FULLMODEM 0x0200 /* Full modem signals */
#define PORT_RJ45 0x0400 /* RJ45 connector - no RI signal */
#define PORT_RESTRICTED 0x0600 /* Restricted connector - no RI / DTR */
#define PORT_MODEMBITS 0x0600 /* Mask for modem fields */
#define PORT_WCLOSE 0x0800 /* Waiting for close */
#define PORT_HANDSHAKEFIX 0x1000 /* Port has H/W flow control fix */
#define PORT_WASPCLOSED 0x2000 /* Port closed with PCLOSE */
#define DUMPMODE 0x4000 /* Dump RTA mem */
#define READ_REG 0x8000 /* Read CD1400 register */
/**************************************************************************
* PHB Structure
* A few words.
*
* Normally Packets are added to the end of the list and removed from
* the start. The pointer tx_add points to a SPACE to put a Packet.
* The pointer tx_remove points to the next Packet to remove
*************************************************************************/
struct PHB {
u8 source;
u8 handshake;
u8 status;
u16 timeout; /* Maximum of 1.9 seconds */
u8 link; /* Send down this link */
u8 destination;
u16 tx_start;
u16 tx_end;
u16 tx_add;
u16 tx_remove;
u16 rx_start;
u16 rx_end;
u16 rx_add;
u16 rx_remove;
};
#endif
/*********** end of file ***********/