lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
903f7d322c
android_kernel_xiaomi_sm8350/drivers/i2c/busses/i2c-pasemi.c
Martin Povišer 7efb8e49f6 i2c: pasemi: Wait for write xfers to finish 
commit bd8963e602c77adc76dbbbfc3417c3cf14fed76b upstream.

Wait for completion of write transfers before returning from the driver.
At first sight it may seem advantageous to leave write transfers queued
for the controller to carry out on its own time, but there's a couple of
issues with it:

 * Driver doesn't check for FIFO space.

 * The queued writes can complete while the driver is in its I2C read
   transfer path which means it will get confused by the raising of
   XEN (the 'transaction ended' signal). This can cause a spurious
   ENODATA error due to premature reading of the MRXFIFO register.

Adding the wait fixes some unreliability issues with the driver. There's
some efficiency cost to it (especially with pasemi_smb_waitready doing
its polling), but that will be alleviated once the driver receives
interrupt support.

Fixes: beb58aa39e ("i2c: PA Semi SMBus driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20 09:19:39 +02:00

416 lines
9.7 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* SMBus host driver for PA Semi PWRficient
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/io.h>
static struct pci_driver pasemi_smb_driver;
struct pasemi_smbus {
struct pci_dev *dev;
struct i2c_adapter adapter;
unsigned long base;
int size;
};
/* Register offsets */
#define REG_MTXFIFO 0x00
#define REG_MRXFIFO 0x04
#define REG_SMSTA 0x14
#define REG_CTL 0x1c
/* Register defs */
#define MTXFIFO_READ 0x00000400
#define MTXFIFO_STOP 0x00000200
#define MTXFIFO_START 0x00000100
#define MTXFIFO_DATA_M 0x000000ff
#define MRXFIFO_EMPTY 0x00000100
#define MRXFIFO_DATA_M 0x000000ff
#define SMSTA_XEN 0x08000000
#define SMSTA_MTN 0x00200000
#define CTL_MRR 0x00000400
#define CTL_MTR 0x00000200
#define CTL_CLK_M 0x000000ff
#define CLK_100K_DIV 84
#define CLK_400K_DIV 21
static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val)
{
dev_dbg(&smbus->dev->dev, "smbus write reg %lx val %08x\n",
smbus->base + reg, val);
outl(val, smbus->base + reg);
}
static inline int reg_read(struct pasemi_smbus *smbus, int reg)
{
int ret;
ret = inl(smbus->base + reg);
dev_dbg(&smbus->dev->dev, "smbus read reg %lx val %08x\n",
smbus->base + reg, ret);
return ret;
}
#define TXFIFO_WR(smbus, reg) reg_write((smbus), REG_MTXFIFO, (reg))
#define RXFIFO_RD(smbus) reg_read((smbus), REG_MRXFIFO)
static void pasemi_smb_clear(struct pasemi_smbus *smbus)
{
unsigned int status;
status = reg_read(smbus, REG_SMSTA);
reg_write(smbus, REG_SMSTA, status);
}
static int pasemi_smb_waitready(struct pasemi_smbus *smbus)
{
int timeout = 10;
unsigned int status;
status = reg_read(smbus, REG_SMSTA);
while (!(status & SMSTA_XEN) && timeout--) {
msleep(1);
status = reg_read(smbus, REG_SMSTA);
}
/* Got NACK? */
if (status & SMSTA_MTN)
return -ENXIO;
if (timeout < 0) {
dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status);
reg_write(smbus, REG_SMSTA, status);
return -ETIME;
}
/* Clear XEN */
reg_write(smbus, REG_SMSTA, SMSTA_XEN);
return 0;
}
static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter,
struct i2c_msg *msg, int stop)
{
struct pasemi_smbus *smbus = adapter->algo_data;
int read, i, err;
u32 rd;
read = msg->flags & I2C_M_RD ? 1 : 0;
TXFIFO_WR(smbus, MTXFIFO_START | i2c_8bit_addr_from_msg(msg));
if (read) {
TXFIFO_WR(smbus, msg->len | MTXFIFO_READ |
(stop ? MTXFIFO_STOP : 0));
err = pasemi_smb_waitready(smbus);
if (err)
goto reset_out;
for (i = 0; i < msg->len; i++) {
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
msg->buf[i] = rd & MRXFIFO_DATA_M;
}
} else {
for (i = 0; i < msg->len - 1; i++)
TXFIFO_WR(smbus, msg->buf[i]);
TXFIFO_WR(smbus, msg->buf[msg->len-1] |
(stop ? MTXFIFO_STOP : 0));
if (stop) {
err = pasemi_smb_waitready(smbus);
if (err)
goto reset_out;
}
}
return 0;
reset_out:
reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
(CLK_100K_DIV & CTL_CLK_M)));
return err;
}
static int pasemi_i2c_xfer(struct i2c_adapter *adapter,
struct i2c_msg *msgs, int num)
{
struct pasemi_smbus *smbus = adapter->algo_data;
int ret, i;
pasemi_smb_clear(smbus);
ret = 0;
for (i = 0; i < num && !ret; i++)
ret = pasemi_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1)));
return ret ? ret : num;
}
static int pasemi_smb_xfer(struct i2c_adapter *adapter,
u16 addr, unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
struct pasemi_smbus *smbus = adapter->algo_data;
unsigned int rd;
int read_flag, err;
int len = 0, i;
/* All our ops take 8-bit shifted addresses */
addr <<= 1;
read_flag = read_write == I2C_SMBUS_READ;
pasemi_smb_clear(smbus);
switch (size) {
case I2C_SMBUS_QUICK:
TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START |
MTXFIFO_STOP);
break;
case I2C_SMBUS_BYTE:
TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START);
if (read_write)
TXFIFO_WR(smbus, 1 | MTXFIFO_STOP | MTXFIFO_READ);
else
TXFIFO_WR(smbus, MTXFIFO_STOP | command);
break;
case I2C_SMBUS_BYTE_DATA:
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
if (read_write) {
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
TXFIFO_WR(smbus, 1 | MTXFIFO_READ | MTXFIFO_STOP);
} else {
TXFIFO_WR(smbus, MTXFIFO_STOP | data->byte);
}
break;
case I2C_SMBUS_WORD_DATA:
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
if (read_write) {
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
TXFIFO_WR(smbus, 2 | MTXFIFO_READ | MTXFIFO_STOP);
} else {
TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M);
TXFIFO_WR(smbus, MTXFIFO_STOP | (data->word >> 8));
}
break;
case I2C_SMBUS_BLOCK_DATA:
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
if (read_write) {
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
TXFIFO_WR(smbus, 1 | MTXFIFO_READ);
rd = RXFIFO_RD(smbus);
len = min_t(u8, (rd & MRXFIFO_DATA_M),
I2C_SMBUS_BLOCK_MAX);
TXFIFO_WR(smbus, len | MTXFIFO_READ |
MTXFIFO_STOP);
} else {
len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX);
TXFIFO_WR(smbus, len);
for (i = 1; i < len; i++)
TXFIFO_WR(smbus, data->block[i]);
TXFIFO_WR(smbus, data->block[len] | MTXFIFO_STOP);
}
break;
case I2C_SMBUS_PROC_CALL:
read_write = I2C_SMBUS_READ;
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M);
TXFIFO_WR(smbus, (data->word >> 8) & MTXFIFO_DATA_M);
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START);
TXFIFO_WR(smbus, 2 | MTXFIFO_STOP | MTXFIFO_READ);
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX - 1);
read_write = I2C_SMBUS_READ;
TXFIFO_WR(smbus, addr | MTXFIFO_START);
TXFIFO_WR(smbus, command);
TXFIFO_WR(smbus, len);
for (i = 1; i <= len; i++)
TXFIFO_WR(smbus, data->block[i]);
TXFIFO_WR(smbus, addr | I2C_SMBUS_READ);
TXFIFO_WR(smbus, MTXFIFO_READ | 1);
rd = RXFIFO_RD(smbus);
len = min_t(u8, (rd & MRXFIFO_DATA_M),
I2C_SMBUS_BLOCK_MAX - len);
TXFIFO_WR(smbus, len | MTXFIFO_READ | MTXFIFO_STOP);
break;
default:
dev_warn(&adapter->dev, "Unsupported transaction %d\n", size);
return -EINVAL;
}
err = pasemi_smb_waitready(smbus);
if (err)
goto reset_out;
if (read_write == I2C_SMBUS_WRITE)
return 0;
switch (size) {
case I2C_SMBUS_BYTE:
case I2C_SMBUS_BYTE_DATA:
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
data->byte = rd & MRXFIFO_DATA_M;
break;
case I2C_SMBUS_WORD_DATA:
case I2C_SMBUS_PROC_CALL:
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
data->word = rd & MRXFIFO_DATA_M;
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
data->word |= (rd & MRXFIFO_DATA_M) << 8;
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_BLOCK_PROC_CALL:
data->block[0] = len;
for (i = 1; i <= len; i ++) {
rd = RXFIFO_RD(smbus);
if (rd & MRXFIFO_EMPTY) {
err = -ENODATA;
goto reset_out;
}
data->block[i] = rd & MRXFIFO_DATA_M;
}
break;
}
return 0;
reset_out:
reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
(CLK_100K_DIV & CTL_CLK_M)));
return err;
}
static u32 pasemi_smb_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_I2C;
}
static const struct i2c_algorithm smbus_algorithm = {
.master_xfer = pasemi_i2c_xfer,
.smbus_xfer = pasemi_smb_xfer,
.functionality = pasemi_smb_func,
};
static int pasemi_smb_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct pasemi_smbus *smbus;
int error;
if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO))
return -ENODEV;
smbus = kzalloc(sizeof(struct pasemi_smbus), GFP_KERNEL);
if (!smbus)
return -ENOMEM;
smbus->dev = dev;
smbus->base = pci_resource_start(dev, 0);
smbus->size = pci_resource_len(dev, 0);
if (!request_region(smbus->base, smbus->size,
pasemi_smb_driver.name)) {
error = -EBUSY;
goto out_kfree;
}
smbus->adapter.owner = THIS_MODULE;
snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
"PA Semi SMBus adapter at 0x%lx", smbus->base);
smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
/* set up the sysfs linkage to our parent device */
smbus->adapter.dev.parent = &dev->dev;
reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
(CLK_100K_DIV & CTL_CLK_M)));
error = i2c_add_adapter(&smbus->adapter);
if (error)
goto out_release_region;
pci_set_drvdata(dev, smbus);
return 0;
out_release_region:
release_region(smbus->base, smbus->size);
out_kfree:
kfree(smbus);
return error;
}
static void pasemi_smb_remove(struct pci_dev *dev)
{
struct pasemi_smbus *smbus = pci_get_drvdata(dev);
i2c_del_adapter(&smbus->adapter);
release_region(smbus->base, smbus->size);
kfree(smbus);
}
static const struct pci_device_id pasemi_smb_ids[] = {
{ PCI_DEVICE(0x1959, 0xa003) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, pasemi_smb_ids);
static struct pci_driver pasemi_smb_driver = {
.name = "i2c-pasemi",
.id_table = pasemi_smb_ids,
.probe = pasemi_smb_probe,
.remove = pasemi_smb_remove,
};
module_pci_driver(pasemi_smb_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver");
Reference in New Issue View Git Blame Copy Permalink