cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
152 lines
3.7 KiB
C
152 lines
3.7 KiB
C
/*
|
|
* FEC instantatiation file for NETTA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/8xx_immap.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/mpc8xx.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/commproc.h>
|
|
|
|
#include "fec_8xx.h"
|
|
|
|
/*************************************************/
|
|
|
|
static struct fec_platform_info fec1_info = {
|
|
.fec_no = 0,
|
|
.use_mdio = 1,
|
|
.phy_addr = 8,
|
|
.fec_irq = SIU_LEVEL1,
|
|
.phy_irq = CPM_IRQ_OFFSET + CPMVEC_PIO_PC6,
|
|
.rx_ring = 128,
|
|
.tx_ring = 16,
|
|
.rx_copybreak = 240,
|
|
.use_napi = 1,
|
|
.napi_weight = 17,
|
|
};
|
|
|
|
static struct fec_platform_info fec2_info = {
|
|
.fec_no = 1,
|
|
.use_mdio = 1,
|
|
.phy_addr = 2,
|
|
.fec_irq = SIU_LEVEL3,
|
|
.phy_irq = CPM_IRQ_OFFSET + CPMVEC_PIO_PC7,
|
|
.rx_ring = 128,
|
|
.tx_ring = 16,
|
|
.rx_copybreak = 240,
|
|
.use_napi = 1,
|
|
.napi_weight = 17,
|
|
};
|
|
|
|
static struct net_device *fec1_dev;
|
|
static struct net_device *fec2_dev;
|
|
|
|
/* XXX custom u-boot & Linux startup needed */
|
|
extern const char *__fw_getenv(const char *var);
|
|
|
|
/* access ports */
|
|
#define setbits32(_addr, _v) __fec_out32(&(_addr), __fec_in32(&(_addr)) | (_v))
|
|
#define clrbits32(_addr, _v) __fec_out32(&(_addr), __fec_in32(&(_addr)) & ~(_v))
|
|
|
|
#define setbits16(_addr, _v) __fec_out16(&(_addr), __fec_in16(&(_addr)) | (_v))
|
|
#define clrbits16(_addr, _v) __fec_out16(&(_addr), __fec_in16(&(_addr)) & ~(_v))
|
|
|
|
int fec_8xx_platform_init(void)
|
|
{
|
|
immap_t *immap = (immap_t *)IMAP_ADDR;
|
|
bd_t *bd = (bd_t *) __res;
|
|
const char *s;
|
|
char *e;
|
|
int i;
|
|
|
|
/* use MDC for MII */
|
|
setbits16(immap->im_ioport.iop_pdpar, 0x0080);
|
|
clrbits16(immap->im_ioport.iop_pddir, 0x0080);
|
|
|
|
/* configure FEC1 pins */
|
|
setbits16(immap->im_ioport.iop_papar, 0xe810);
|
|
setbits16(immap->im_ioport.iop_padir, 0x0810);
|
|
clrbits16(immap->im_ioport.iop_padir, 0xe000);
|
|
|
|
setbits32(immap->im_cpm.cp_pbpar, 0x00000001);
|
|
clrbits32(immap->im_cpm.cp_pbdir, 0x00000001);
|
|
|
|
setbits32(immap->im_cpm.cp_cptr, 0x00000100);
|
|
clrbits32(immap->im_cpm.cp_cptr, 0x00000050);
|
|
|
|
clrbits16(immap->im_ioport.iop_pcpar, 0x0200);
|
|
clrbits16(immap->im_ioport.iop_pcdir, 0x0200);
|
|
clrbits16(immap->im_ioport.iop_pcso, 0x0200);
|
|
setbits16(immap->im_ioport.iop_pcint, 0x0200);
|
|
|
|
/* configure FEC2 pins */
|
|
setbits32(immap->im_cpm.cp_pepar, 0x00039620);
|
|
setbits32(immap->im_cpm.cp_pedir, 0x00039620);
|
|
setbits32(immap->im_cpm.cp_peso, 0x00031000);
|
|
clrbits32(immap->im_cpm.cp_peso, 0x00008620);
|
|
|
|
setbits32(immap->im_cpm.cp_cptr, 0x00000080);
|
|
clrbits32(immap->im_cpm.cp_cptr, 0x00000028);
|
|
|
|
clrbits16(immap->im_ioport.iop_pcpar, 0x0200);
|
|
clrbits16(immap->im_ioport.iop_pcdir, 0x0200);
|
|
clrbits16(immap->im_ioport.iop_pcso, 0x0200);
|
|
setbits16(immap->im_ioport.iop_pcint, 0x0200);
|
|
|
|
/* fill up */
|
|
fec1_info.sys_clk = bd->bi_intfreq;
|
|
fec2_info.sys_clk = bd->bi_intfreq;
|
|
|
|
s = __fw_getenv("ethaddr");
|
|
if (s != NULL) {
|
|
for (i = 0; i < 6; i++) {
|
|
fec1_info.macaddr[i] = simple_strtoul(s, &e, 16);
|
|
if (*e)
|
|
s = e + 1;
|
|
}
|
|
}
|
|
|
|
s = __fw_getenv("eth1addr");
|
|
if (s != NULL) {
|
|
for (i = 0; i < 6; i++) {
|
|
fec2_info.macaddr[i] = simple_strtoul(s, &e, 16);
|
|
if (*e)
|
|
s = e + 1;
|
|
}
|
|
}
|
|
|
|
fec_8xx_init_one(&fec1_info, &fec1_dev);
|
|
fec_8xx_init_one(&fec2_info, &fec2_dev);
|
|
|
|
return fec1_dev != NULL && fec2_dev != NULL ? 0 : -1;
|
|
}
|
|
|
|
void fec_8xx_platform_cleanup(void)
|
|
{
|
|
if (fec2_dev != NULL)
|
|
fec_8xx_cleanup_one(fec2_dev);
|
|
|
|
if (fec1_dev != NULL)
|
|
fec_8xx_cleanup_one(fec1_dev);
|
|
}
|