6473d160b4
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
407 lines
8.0 KiB
C
407 lines
8.0 KiB
C
/*
|
|
* Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
|
|
*
|
|
* Copyright (c) 2003 Intracom S.A.
|
|
* by Pantelis Antoniou <panto@intracom.gr>
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc.
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/pgtable.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "fs_enet.h"
|
|
|
|
static int bitbang_prep_bit(u8 **datp, u8 *mskp,
|
|
struct fs_mii_bit *mii_bit)
|
|
{
|
|
void *dat;
|
|
int adv;
|
|
u8 msk;
|
|
|
|
dat = (void*) mii_bit->offset;
|
|
|
|
adv = mii_bit->bit >> 3;
|
|
dat = (char *)dat + adv;
|
|
|
|
msk = 1 << (7 - (mii_bit->bit & 7));
|
|
|
|
*datp = dat;
|
|
*mskp = msk;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void bb_set(u8 *p, u8 m)
|
|
{
|
|
out_8(p, in_8(p) | m);
|
|
}
|
|
|
|
static inline void bb_clr(u8 *p, u8 m)
|
|
{
|
|
out_8(p, in_8(p) & ~m);
|
|
}
|
|
|
|
static inline int bb_read(u8 *p, u8 m)
|
|
{
|
|
return (in_8(p) & m) != 0;
|
|
}
|
|
|
|
static inline void mdio_active(struct bb_info *bitbang)
|
|
{
|
|
bb_set(bitbang->mdio_dir, bitbang->mdio_dir_msk);
|
|
}
|
|
|
|
static inline void mdio_tristate(struct bb_info *bitbang )
|
|
{
|
|
bb_clr(bitbang->mdio_dir, bitbang->mdio_dir_msk);
|
|
}
|
|
|
|
static inline int mdio_read(struct bb_info *bitbang )
|
|
{
|
|
return bb_read(bitbang->mdio_dat, bitbang->mdio_dat_msk);
|
|
}
|
|
|
|
static inline void mdio(struct bb_info *bitbang , int what)
|
|
{
|
|
if (what)
|
|
bb_set(bitbang->mdio_dat, bitbang->mdio_dat_msk);
|
|
else
|
|
bb_clr(bitbang->mdio_dat, bitbang->mdio_dat_msk);
|
|
}
|
|
|
|
static inline void mdc(struct bb_info *bitbang , int what)
|
|
{
|
|
if (what)
|
|
bb_set(bitbang->mdc_dat, bitbang->mdc_msk);
|
|
else
|
|
bb_clr(bitbang->mdc_dat, bitbang->mdc_msk);
|
|
}
|
|
|
|
static inline void mii_delay(struct bb_info *bitbang )
|
|
{
|
|
udelay(bitbang->delay);
|
|
}
|
|
|
|
/* Utility to send the preamble, address, and register (common to read and write). */
|
|
static void bitbang_pre(struct bb_info *bitbang , int read, u8 addr, u8 reg)
|
|
{
|
|
int j;
|
|
|
|
/*
|
|
* Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
|
|
* The IEEE spec says this is a PHY optional requirement. The AMD
|
|
* 79C874 requires one after power up and one after a MII communications
|
|
* error. This means that we are doing more preambles than we need,
|
|
* but it is safer and will be much more robust.
|
|
*/
|
|
|
|
mdio_active(bitbang);
|
|
mdio(bitbang, 1);
|
|
for (j = 0; j < 32; j++) {
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
}
|
|
|
|
/* send the start bit (01) and the read opcode (10) or write (10) */
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, read);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, !read);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
|
|
/* send the PHY address */
|
|
for (j = 0; j < 5; j++) {
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, (addr & 0x10) != 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
addr <<= 1;
|
|
}
|
|
|
|
/* send the register address */
|
|
for (j = 0; j < 5; j++) {
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, (reg & 0x10) != 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
reg <<= 1;
|
|
}
|
|
}
|
|
|
|
static int fs_enet_mii_bb_read(struct mii_bus *bus , int phy_id, int location)
|
|
{
|
|
u16 rdreg;
|
|
int ret, j;
|
|
u8 addr = phy_id & 0xff;
|
|
u8 reg = location & 0xff;
|
|
struct bb_info* bitbang = bus->priv;
|
|
|
|
bitbang_pre(bitbang, 1, addr, reg);
|
|
|
|
/* tri-state our MDIO I/O pin so we can read */
|
|
mdc(bitbang, 0);
|
|
mdio_tristate(bitbang);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
|
|
/* check the turnaround bit: the PHY should be driving it to zero */
|
|
if (mdio_read(bitbang) != 0) {
|
|
/* PHY didn't drive TA low */
|
|
for (j = 0; j < 32; j++) {
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
}
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
|
|
/* read 16 bits of register data, MSB first */
|
|
rdreg = 0;
|
|
for (j = 0; j < 16; j++) {
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
rdreg <<= 1;
|
|
rdreg |= mdio_read(bitbang);
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
}
|
|
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
|
|
ret = rdreg;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int fs_enet_mii_bb_write(struct mii_bus *bus, int phy_id, int location, u16 val)
|
|
{
|
|
int j;
|
|
struct bb_info* bitbang = bus->priv;
|
|
|
|
u8 addr = phy_id & 0xff;
|
|
u8 reg = location & 0xff;
|
|
u16 value = val & 0xffff;
|
|
|
|
bitbang_pre(bitbang, 0, addr, reg);
|
|
|
|
/* send the turnaround (10) */
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
|
|
/* write 16 bits of register data, MSB first */
|
|
for (j = 0; j < 16; j++) {
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, (value & 0x8000) != 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
value <<= 1;
|
|
}
|
|
|
|
/*
|
|
* Tri-state the MDIO line.
|
|
*/
|
|
mdio_tristate(bitbang);
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
return 0;
|
|
}
|
|
|
|
static int fs_enet_mii_bb_reset(struct mii_bus *bus)
|
|
{
|
|
/*nothing here - dunno how to reset it*/
|
|
return 0;
|
|
}
|
|
|
|
static int fs_mii_bitbang_init(struct bb_info *bitbang, struct fs_mii_bb_platform_info* fmpi)
|
|
{
|
|
int r;
|
|
|
|
bitbang->delay = fmpi->delay;
|
|
|
|
r = bitbang_prep_bit(&bitbang->mdio_dir,
|
|
&bitbang->mdio_dir_msk,
|
|
&fmpi->mdio_dir);
|
|
if (r != 0)
|
|
return r;
|
|
|
|
r = bitbang_prep_bit(&bitbang->mdio_dat,
|
|
&bitbang->mdio_dat_msk,
|
|
&fmpi->mdio_dat);
|
|
if (r != 0)
|
|
return r;
|
|
|
|
r = bitbang_prep_bit(&bitbang->mdc_dat,
|
|
&bitbang->mdc_msk,
|
|
&fmpi->mdc_dat);
|
|
if (r != 0)
|
|
return r;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int __devinit fs_enet_mdio_probe(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct fs_mii_bb_platform_info *pdata;
|
|
struct mii_bus *new_bus;
|
|
struct bb_info *bitbang;
|
|
int err = 0;
|
|
|
|
if (NULL == dev)
|
|
return -EINVAL;
|
|
|
|
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
|
|
|
|
if (NULL == new_bus)
|
|
return -ENOMEM;
|
|
|
|
bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
|
|
|
|
if (NULL == bitbang)
|
|
return -ENOMEM;
|
|
|
|
new_bus->name = "BB MII Bus",
|
|
new_bus->read = &fs_enet_mii_bb_read,
|
|
new_bus->write = &fs_enet_mii_bb_write,
|
|
new_bus->reset = &fs_enet_mii_bb_reset,
|
|
new_bus->id = pdev->id;
|
|
|
|
new_bus->phy_mask = ~0x9;
|
|
pdata = (struct fs_mii_bb_platform_info *)pdev->dev.platform_data;
|
|
|
|
if (NULL == pdata) {
|
|
printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*set up workspace*/
|
|
fs_mii_bitbang_init(bitbang, pdata);
|
|
|
|
new_bus->priv = bitbang;
|
|
|
|
new_bus->irq = pdata->irq;
|
|
|
|
new_bus->dev = dev;
|
|
dev_set_drvdata(dev, new_bus);
|
|
|
|
err = mdiobus_register(new_bus);
|
|
|
|
if (0 != err) {
|
|
printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
|
|
new_bus->name);
|
|
goto bus_register_fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
bus_register_fail:
|
|
kfree(bitbang);
|
|
kfree(new_bus);
|
|
|
|
return err;
|
|
}
|
|
|
|
|
|
static int fs_enet_mdio_remove(struct device *dev)
|
|
{
|
|
struct mii_bus *bus = dev_get_drvdata(dev);
|
|
|
|
mdiobus_unregister(bus);
|
|
|
|
dev_set_drvdata(dev, NULL);
|
|
|
|
iounmap((void *) (&bus->priv));
|
|
bus->priv = NULL;
|
|
kfree(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct device_driver fs_enet_bb_mdio_driver = {
|
|
.name = "fsl-bb-mdio",
|
|
.bus = &platform_bus_type,
|
|
.probe = fs_enet_mdio_probe,
|
|
.remove = fs_enet_mdio_remove,
|
|
};
|
|
|
|
int fs_enet_mdio_bb_init(void)
|
|
{
|
|
return driver_register(&fs_enet_bb_mdio_driver);
|
|
}
|
|
|
|
void fs_enet_mdio_bb_exit(void)
|
|
{
|
|
driver_unregister(&fs_enet_bb_mdio_driver);
|
|
}
|
|
|