android_kernel_xiaomi_sm8350/fs/dlm/midcomms.c
David Teigland c36258b592 [DLM] block dlm_recv in recovery transition
Introduce a per-lockspace rwsem that's held in read mode by dlm_recv
threads while working in the dlm.  This allows dlm_recv activity to be
suspended when the lockspace transitions to, from and between recovery
cycles.

The specific bug prompting this change is one where an in-progress
recovery cycle is aborted by a new recovery cycle.  While dlm_recv was
processing a recovery message, the recovery cycle was aborted and
dlm_recoverd began cleaning up.  dlm_recv decremented recover_locks_count
on an rsb after dlm_recoverd had reset it to zero.  This is fixed by
suspending dlm_recv (taking write lock on the rwsem) before aborting the
current recovery.

The transitions to/from normal and recovery modes are simplified by using
this new ability to block dlm_recv.  The switch from normal to recovery
mode means dlm_recv goes from processing locking messages, to saving them
for later, and vice versa.  Races are avoided by blocking dlm_recv when
setting the flag that switches between modes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:38 +01:00

128 lines
3.5 KiB
C

/******************************************************************************
*******************************************************************************
**
** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
** Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved.
**
** This copyrighted material is made available to anyone wishing to use,
** modify, copy, or redistribute it subject to the terms and conditions
** of the GNU General Public License v.2.
**
*******************************************************************************
******************************************************************************/
/*
* midcomms.c
*
* This is the appallingly named "mid-level" comms layer.
*
* Its purpose is to take packets from the "real" comms layer,
* split them up into packets and pass them to the interested
* part of the locking mechanism.
*
* It also takes messages from the locking layer, formats them
* into packets and sends them to the comms layer.
*/
#include "dlm_internal.h"
#include "lowcomms.h"
#include "config.h"
#include "lock.h"
#include "midcomms.h"
static void copy_from_cb(void *dst, const void *base, unsigned offset,
unsigned len, unsigned limit)
{
unsigned copy = len;
if ((copy + offset) > limit)
copy = limit - offset;
memcpy(dst, base + offset, copy);
len -= copy;
if (len)
memcpy(dst + copy, base, len);
}
/*
* Called from the low-level comms layer to process a buffer of
* commands.
*
* Only complete messages are processed here, any "spare" bytes from
* the end of a buffer are saved and tacked onto the front of the next
* message that comes in. I doubt this will happen very often but we
* need to be able to cope with it and I don't want the task to be waiting
* for packets to come in when there is useful work to be done.
*/
int dlm_process_incoming_buffer(int nodeid, const void *base,
unsigned offset, unsigned len, unsigned limit)
{
unsigned char __tmp[DLM_INBUF_LEN];
struct dlm_header *msg = (struct dlm_header *) __tmp;
int ret = 0;
int err = 0;
uint16_t msglen;
uint32_t lockspace;
while (len > sizeof(struct dlm_header)) {
/* Copy just the header to check the total length. The
message may wrap around the end of the buffer back to the
start, so we need to use a temp buffer and copy_from_cb. */
copy_from_cb(msg, base, offset, sizeof(struct dlm_header),
limit);
msglen = le16_to_cpu(msg->h_length);
lockspace = msg->h_lockspace;
err = -EINVAL;
if (msglen < sizeof(struct dlm_header))
break;
err = -E2BIG;
if (msglen > dlm_config.ci_buffer_size) {
log_print("message size %d from %d too big, buf len %d",
msglen, nodeid, len);
break;
}
err = 0;
/* If only part of the full message is contained in this
buffer, then do nothing and wait for lowcomms to call
us again later with more data. We return 0 meaning
we've consumed none of the input buffer. */
if (msglen > len)
break;
/* Allocate a larger temp buffer if the full message won't fit
in the buffer on the stack (which should work for most
ordinary messages). */
if (msglen > sizeof(__tmp) &&
msg == (struct dlm_header *) __tmp) {
msg = kmalloc(dlm_config.ci_buffer_size, GFP_KERNEL);
if (msg == NULL)
return ret;
}
copy_from_cb(msg, base, offset, msglen, limit);
BUG_ON(lockspace != msg->h_lockspace);
ret += msglen;
offset += msglen;
offset &= (limit - 1);
len -= msglen;
dlm_receive_buffer(msg, nodeid);
}
if (msg != (struct dlm_header *) __tmp)
kfree(msg);
return err ? err : ret;
}