android_kernel_xiaomi_sm8350/arch/sh/boards/mach-cayman/setup.c
Paul Mundt da2014a2b0 sh: Shuffle the board directories in to mach groups.
This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 21:01:19 +09:00

188 lines
5.4 KiB
C

/*
* arch/sh/mach-cayman/setup.c
*
* SH5 Cayman support
*
* Copyright (C) 2002 David J. Mckay & Benedict Gaster
* Copyright (C) 2003 - 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <cpu/irq.h>
/*
* Platform Dependent Interrupt Priorities.
*/
/* Using defaults defined in irq.h */
#define RES NO_PRIORITY /* Disabled */
#define IR0 IRL0_PRIORITY /* IRLs */
#define IR1 IRL1_PRIORITY
#define IR2 IRL2_PRIORITY
#define IR3 IRL3_PRIORITY
#define PCA INTA_PRIORITY /* PCI Ints */
#define PCB INTB_PRIORITY
#define PCC INTC_PRIORITY
#define PCD INTD_PRIORITY
#define SER TOP_PRIORITY
#define ERR TOP_PRIORITY
#define PW0 TOP_PRIORITY
#define PW1 TOP_PRIORITY
#define PW2 TOP_PRIORITY
#define PW3 TOP_PRIORITY
#define DM0 NO_PRIORITY /* DMA Ints */
#define DM1 NO_PRIORITY
#define DM2 NO_PRIORITY
#define DM3 NO_PRIORITY
#define DAE NO_PRIORITY
#define TU0 TIMER_PRIORITY /* TMU Ints */
#define TU1 NO_PRIORITY
#define TU2 NO_PRIORITY
#define TI2 NO_PRIORITY
#define ATI NO_PRIORITY /* RTC Ints */
#define PRI NO_PRIORITY
#define CUI RTC_PRIORITY
#define ERI SCIF_PRIORITY /* SCIF Ints */
#define RXI SCIF_PRIORITY
#define BRI SCIF_PRIORITY
#define TXI SCIF_PRIORITY
#define ITI TOP_PRIORITY /* WDT Ints */
/* Setup for the SMSC FDC37C935 */
#define SMSC_SUPERIO_BASE 0x04000000
#define SMSC_CONFIG_PORT_ADDR 0x3f0
#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
#define SMSC_DATA_PORT_ADDR 0x3f1
#define SMSC_ENTER_CONFIG_KEY 0x55
#define SMSC_EXIT_CONFIG_KEY 0xaa
#define SMCS_LOGICAL_DEV_INDEX 0x07
#define SMSC_DEVICE_ID_INDEX 0x20
#define SMSC_DEVICE_REV_INDEX 0x21
#define SMSC_ACTIVATE_INDEX 0x30
#define SMSC_PRIMARY_BASE_INDEX 0x60
#define SMSC_SECONDARY_BASE_INDEX 0x62
#define SMSC_PRIMARY_INT_INDEX 0x70
#define SMSC_SECONDARY_INT_INDEX 0x72
#define SMSC_IDE1_DEVICE 1
#define SMSC_KEYBOARD_DEVICE 7
#define SMSC_CONFIG_REGISTERS 8
#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
outb((index), SMSC_INDEX_PORT_ADDR); \
inb(SMSC_DATA_PORT_ADDR); })
#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
outb((index), SMSC_INDEX_PORT_ADDR); \
outb((val), SMSC_DATA_PORT_ADDR); })
#define IDE1_PRIMARY_BASE 0x01f0
#define IDE1_SECONDARY_BASE 0x03f6
unsigned long smsc_superio_virt;
int platform_int_priority[NR_INTC_IRQS] = {
IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
};
static int __init smsc_superio_setup(void)
{
unsigned char devid, devrev;
smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
if (!smsc_superio_virt) {
panic("Unable to remap SMSC SuperIO\n");
}
/* Initially the chip is in run state */
/* Put it into configuration state */
outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
/* Read device ID info */
devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
/* Select the keyboard device */
SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* Select the interrupts */
/* On a PC keyboard is IRQ1, mouse is IRQ12 */
SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
#ifdef CONFIG_IDE
/*
* Only IDE1 exists on the Cayman
*/
/* Power it on */
SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
SMSC_PRIMARY_BASE_INDEX + 0);
SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
SMSC_PRIMARY_BASE_INDEX + 1);
SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
SMSC_SECONDARY_BASE_INDEX + 0);
SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
SMSC_SECONDARY_BASE_INDEX + 1);
SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
SMCS_LOGICAL_DEV_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
#endif
/* Exit the configuration state */
outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
return 0;
}
__initcall(smsc_superio_setup);
static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
{
if (port < 0x400) {
extern unsigned long smsc_superio_virt;
return (void __iomem *)((port << 2) | smsc_superio_virt);
}
return (void __iomem *)port;
}
extern void init_cayman_irq(void);
static struct sh_machine_vector mv_cayman __initmv = {
.mv_name = "Hitachi Cayman",
.mv_nr_irqs = 64,
.mv_ioport_map = cayman_ioport_map,
.mv_init_irq = init_cayman_irq,
};