android_kernel_xiaomi_sm8350/drivers/usb
Olav Kongas 959eea2191 [PATCH] USB: isp116x-hcd: cleanup
The attached patch makes a cleanup of isp116x-hcd. Most of the volume of
the patch comes from 2 sources: moving the code around to get rid of a
few function prototypes and reworking register dumping functions/macros.
Among other things, switched over from using procfs to debugfs.

Cleanup. The following changes were made:

- Rework register dumping code so it can be used for dumping
  to both syslog and debugfs.
- Switch from procfs to debugfs..
- Die gracefully on Unrecoverable Error interrupt.
- Fix memory leak in isp116x_urb_enqueue(), if HC happens to
  die in a narrow time window.
- Fix a 'sparce' warning (unnecessary cast).
- Report Devices Removable for root hub ports by default
  (was Devices Permanently Attached).
- Move bus suspend/resume functions down in code to get rid of
  a few function prototypes.
- A number of one-line cleanups.
- Add an entry to MAINTAINERS.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 MAINTAINERS                    |    6
 drivers/usb/host/isp116x-hcd.c |  429 ++++++++++++++++-------------------------
 drivers/usb/host/isp116x.h     |   83 +++++--
 3 files changed, 230 insertions(+), 288 deletions(-)
2006-01-04 13:48:29 -08:00
..
atm [PATCH] Additional device ID for Conexant AccessRunner USB driver 2005-11-29 21:39:22 -08:00
class [PATCH] USB: Converting cdc acm to a ring queue 2006-01-04 13:48:29 -08:00
core [PATCH] usbcore: allow suspend/resume even if drivers don't support it 2005-12-21 14:46:35 -08:00
gadget [PATCH] USB: fix build breakage in dummy_hcd.c 2005-11-17 11:29:52 -08:00
host [PATCH] USB: isp116x-hcd: cleanup 2006-01-04 13:48:29 -08:00
image [PATCH] USB: Adapt microtek driver to new scsi features 2005-11-17 11:29:54 -08:00
input [PATCH] Input: wacom - fix X axis setup 2005-12-30 08:20:26 -08:00
media [PATCH] USB: SN9C10x driver - bad page state fix 2005-11-23 23:04:27 -08:00
misc [PATCH] auerswald.c: %zd for size_t 2005-12-15 10:04:29 -08:00
mon [PATCH] USB: convert usbmon to use usb notifiers 2005-10-28 16:47:46 -07:00
net [PATCH] USB: move CONFIG_USB_DEBUG checks into the Makefile 2005-11-17 11:29:55 -08:00
serial [PATCH] usb serial: remove redundant include 2005-11-23 23:04:28 -08:00
storage [PATCH] USB Storage: Force starget->scsi_level in usb-storage scsiglue.c 2005-12-21 14:46:34 -08:00
Kconfig [PATCH] USB: add S3C24XX USB Host driver support 2005-07-29 13:12:53 -07:00
Makefile [PATCH] USB: delete the bluetty driver 2005-10-28 16:47:47 -07:00
README
usb-skeleton.c [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.