ac840605f3
Currently, there are two different fields in the mv643xx_eth_platform_data struct that together describe the PHY address -- one field (phy_addr) has the address of the PHY, but if that address is zero, a second field (force_phy_addr) needs to be set to distinguish the actual address zero from a zero due to not having filled in the PHY address explicitly (which should mean 'use the default PHY address'). If we are a bit smarter about the encoding of the phy_addr field, we can avoid the need for a second field -- this patch does that. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
101 lines
2.5 KiB
C
101 lines
2.5 KiB
C
/*
|
|
* arch/arm/mach-loki/lb88rc8480-setup.c
|
|
*
|
|
* Marvell LB88RC8480 Development Board Setup
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <mach/loki.h>
|
|
#include "common.h"
|
|
|
|
#define LB88RC8480_FLASH_BOOT_CS_BASE 0xf8000000
|
|
#define LB88RC8480_FLASH_BOOT_CS_SIZE SZ_128M
|
|
|
|
#define LB88RC8480_NOR_BOOT_BASE 0xff000000
|
|
#define LB88RC8480_NOR_BOOT_SIZE SZ_16M
|
|
|
|
static struct mtd_partition lb88rc8480_boot_flash_parts[] = {
|
|
{
|
|
.name = "kernel",
|
|
.offset = 0,
|
|
.size = SZ_2M,
|
|
}, {
|
|
.name = "root-fs",
|
|
.offset = SZ_2M,
|
|
.size = (SZ_8M + SZ_4M + SZ_1M),
|
|
}, {
|
|
.name = "u-boot",
|
|
.offset = (SZ_8M + SZ_4M + SZ_2M + SZ_1M),
|
|
.size = SZ_1M,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data lb88rc8480_boot_flash_data = {
|
|
.parts = lb88rc8480_boot_flash_parts,
|
|
.nr_parts = ARRAY_SIZE(lb88rc8480_boot_flash_parts),
|
|
.width = 1, /* 8 bit bus width */
|
|
};
|
|
|
|
static struct resource lb88rc8480_boot_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = LB88RC8480_NOR_BOOT_BASE,
|
|
.end = LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device lb88rc8480_boot_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &lb88rc8480_boot_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &lb88rc8480_boot_flash_resource,
|
|
};
|
|
|
|
static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
|
|
.mac_addr = { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 },
|
|
};
|
|
|
|
static void __init lb88rc8480_init(void)
|
|
{
|
|
/*
|
|
* Basic setup. Needs to be called early.
|
|
*/
|
|
loki_init();
|
|
|
|
loki_ge0_init(&lb88rc8480_ge0_data);
|
|
loki_sas_init();
|
|
loki_uart0_init();
|
|
loki_uart1_init();
|
|
|
|
loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE,
|
|
LB88RC8480_FLASH_BOOT_CS_SIZE);
|
|
platform_device_register(&lb88rc8480_boot_flash);
|
|
}
|
|
|
|
MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
|
|
/* Maintainer: Ke Wei <kewei@marvell.com> */
|
|
.phys_io = LOKI_REGS_PHYS_BASE,
|
|
.io_pg_offst = ((LOKI_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
|
.boot_params = 0x00000100,
|
|
.init_machine = lb88rc8480_init,
|
|
.map_io = loki_map_io,
|
|
.init_irq = loki_init_irq,
|
|
.timer = &loki_timer,
|
|
MACHINE_END
|