96f1050d3d
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
225 lines
12 KiB
C
225 lines
12 KiB
C
/*
|
|
* Copyright 2008-2009 Analog Devices Inc.
|
|
*
|
|
* Licensed under the ADI BSD license or the GPL-2 (or later)
|
|
*/
|
|
|
|
#ifndef _DEF_BF514_H
|
|
#define _DEF_BF514_H
|
|
|
|
/* Include all Core registers and bit definitions */
|
|
#include <asm/def_LPBlackfin.h>
|
|
|
|
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
|
|
|
|
/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
|
|
#include "defBF51x_base.h"
|
|
|
|
/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
|
|
|
|
/* SDH Registers */
|
|
|
|
#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */
|
|
#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */
|
|
#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */
|
|
#define SDH_COMMAND 0xFFC0390C /* SDH Command */
|
|
#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */
|
|
#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */
|
|
#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */
|
|
#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */
|
|
#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */
|
|
#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */
|
|
#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */
|
|
#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */
|
|
#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */
|
|
#define SDH_STATUS 0xFFC03934 /* SDH Status */
|
|
#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */
|
|
#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */
|
|
#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */
|
|
#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */
|
|
#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */
|
|
#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */
|
|
#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */
|
|
#define SDH_CFG 0xFFC039C8 /* SDH Configuration */
|
|
#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */
|
|
#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */
|
|
#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */
|
|
#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */
|
|
#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */
|
|
#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */
|
|
#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */
|
|
#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */
|
|
#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */
|
|
|
|
/* Removable Storage Interface Registers */
|
|
|
|
#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */
|
|
#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */
|
|
#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */
|
|
#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */
|
|
#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */
|
|
#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */
|
|
#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */
|
|
#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */
|
|
#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */
|
|
#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */
|
|
#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */
|
|
#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */
|
|
#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */
|
|
#define RSI_STATUS 0xFFC03834 /* RSI Status Register */
|
|
#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */
|
|
#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */
|
|
#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */
|
|
#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */
|
|
#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */
|
|
#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */
|
|
#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */
|
|
#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
|
|
#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
|
|
#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
|
|
#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */
|
|
#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */
|
|
#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */
|
|
#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */
|
|
#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */
|
|
#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */
|
|
#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
|
|
#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
|
|
|
|
/* ********************************************************** */
|
|
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
|
|
/* and MULTI BIT READ MACROS */
|
|
/* ********************************************************** */
|
|
|
|
/* Bit masks for SDH_COMMAND */
|
|
|
|
#define CMD_IDX 0x3f /* Command Index */
|
|
#define CMD_RSP 0x40 /* Response */
|
|
#define CMD_L_RSP 0x80 /* Long Response */
|
|
#define CMD_INT_E 0x100 /* Command Interrupt */
|
|
#define CMD_PEND_E 0x200 /* Command Pending */
|
|
#define CMD_E 0x400 /* Command Enable */
|
|
|
|
/* Bit masks for SDH_PWR_CTL */
|
|
|
|
#define PWR_ON 0x3 /* Power On */
|
|
#if 0
|
|
#define TBD 0x3c /* TBD */
|
|
#endif
|
|
#define SD_CMD_OD 0x40 /* Open Drain Output */
|
|
#define ROD_CTL 0x80 /* Rod Control */
|
|
|
|
/* Bit masks for SDH_CLK_CTL */
|
|
|
|
#define CLKDIV 0xff /* MC_CLK Divisor */
|
|
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
|
|
#define PWR_SV_E 0x200 /* Power Save Enable */
|
|
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
|
|
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
|
|
|
|
/* Bit masks for SDH_RESP_CMD */
|
|
|
|
#define RESP_CMD 0x3f /* Response Command */
|
|
|
|
/* Bit masks for SDH_DATA_CTL */
|
|
|
|
#define DTX_E 0x1 /* Data Transfer Enable */
|
|
#define DTX_DIR 0x2 /* Data Transfer Direction */
|
|
#define DTX_MODE 0x4 /* Data Transfer Mode */
|
|
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
|
|
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
|
|
|
|
/* Bit masks for SDH_STATUS */
|
|
|
|
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
|
|
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
|
|
#define CMD_TIME_OUT 0x4 /* CMD Time Out */
|
|
#define DAT_TIME_OUT 0x8 /* Data Time Out */
|
|
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
|
|
#define RX_OVERRUN 0x20 /* Receive Overrun */
|
|
#define CMD_RESP_END 0x40 /* CMD Response End */
|
|
#define CMD_SENT 0x80 /* CMD Sent */
|
|
#define DAT_END 0x100 /* Data End */
|
|
#define START_BIT_ERR 0x200 /* Start Bit Error */
|
|
#define DAT_BLK_END 0x400 /* Data Block End */
|
|
#define CMD_ACT 0x800 /* CMD Active */
|
|
#define TX_ACT 0x1000 /* Transmit Active */
|
|
#define RX_ACT 0x2000 /* Receive Active */
|
|
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
|
|
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
|
|
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
|
|
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
|
|
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
|
|
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
|
|
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
|
|
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
|
|
|
|
/* Bit masks for SDH_STATUS_CLR */
|
|
|
|
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
|
|
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
|
|
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
|
|
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
|
|
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
|
|
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
|
|
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
|
|
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
|
|
#define DAT_END_STAT 0x100 /* Data End Status */
|
|
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
|
|
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
|
|
|
|
/* Bit masks for SDH_MASK0 */
|
|
|
|
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
|
|
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
|
|
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
|
|
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
|
|
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
|
|
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
|
|
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
|
|
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
|
|
#define DAT_END_MASK 0x100 /* Data End Mask */
|
|
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
|
|
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
|
|
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
|
|
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
|
|
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
|
|
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
|
|
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
|
|
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
|
|
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
|
|
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
|
|
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
|
|
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
|
|
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
|
|
|
|
/* Bit masks for SDH_FIFO_CNT */
|
|
|
|
#define FIFO_COUNT 0x7fff /* FIFO Count */
|
|
|
|
/* Bit masks for SDH_E_STATUS */
|
|
|
|
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
|
|
#define SD_CARD_DET 0x10 /* SD Card Detect */
|
|
|
|
/* Bit masks for SDH_E_MASK */
|
|
|
|
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
|
|
#define SCD_MSK 0x40 /* Mask Card Detect */
|
|
|
|
/* Bit masks for SDH_CFG */
|
|
|
|
#define CLKS_EN 0x1 /* Clocks Enable */
|
|
#define SD4E 0x4 /* SDIO 4-Bit Enable */
|
|
#define MWE 0x8 /* Moving Window Enable */
|
|
#define SD_RST 0x10 /* SDMMC Reset */
|
|
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
|
|
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
|
|
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
|
|
|
|
/* Bit masks for SDH_RD_WAIT_EN */
|
|
|
|
#define RWR 0x1 /* Read Wait Request */
|
|
|
|
#endif /* _DEF_BF514_H */
|