.. |
au0828
|
|
|
bt8xx
|
V4L/DVB (9940): bt832: remove this driver
|
2008-12-30 09:39:25 -02:00 |
cpia2
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
cx18
|
V4L/DVB (9937): cx18: Use a consistent crystal value for computing all PLL parameters
|
2008-12-30 09:39:24 -02:00 |
cx88
|
V4L/DVB (9918): cx88: advise/acquire clean-up for HVR-1300/3000/4000
|
2008-12-30 09:39:17 -02:00 |
cx23885
|
V4L/DVB (9795): Add Compro VideoMate E650F (DVB-T part only).
|
2008-12-30 09:38:25 -02:00 |
cx25840
|
V4L/DVB (9823): cx25840: convert to v4l2_subdev.
|
2008-12-30 09:38:38 -02:00 |
em28xx
|
V4L/DVB (9980): em28xx: simplify analog logic
|
2008-12-30 09:39:38 -02:00 |
et61x251
|
V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), dev_set_name()
|
2008-12-29 17:53:26 -02:00 |
gspca
|
V4L/DVB (9994): gspca: t613: Bad loop in om6802 reset.
|
2008-12-30 09:39:43 -02:00 |
ivtv
|
V4L/DVB (9975): ivtv: set v4l2_dev instead of parent.
|
2008-12-30 09:39:36 -02:00 |
ovcamchip
|
|
|
pvrusb2
|
V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), dev_set_name()
|
2008-12-29 17:53:26 -02:00 |
pwc
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
saa7134
|
V4L/DVB (9798): saa7134: add analog and DVB-T support for Medion/Creatix CTX946
|
2008-12-30 09:38:27 -02:00 |
sn9c102
|
V4L/DVB (9711): gspca: Let gspca handle the webcams 045e:00f5 & 00f7 instead of sn9c102.
|
2008-12-29 17:53:40 -02:00 |
usbvideo
|
V4L/DVB (9972): v4l: usbvideo, fix module ref count check
|
2008-12-30 09:39:34 -02:00 |
usbvision
|
V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), dev_set_name()
|
2008-12-29 17:53:26 -02:00 |
uvc
|
V4L/DVB (9903): uvcvideo: V4L2 zoom controls support
|
2008-12-30 09:39:11 -02:00 |
zc0301
|
V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), dev_set_name()
|
2008-12-29 17:53:26 -02:00 |
zoran
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
adv7170.c
|
|
|
adv7175.c
|
|
|
arv.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
bt819.c
|
|
|
bt856.c
|
|
|
bt866.c
|
|
|
btcx-risc.c
|
|
|
btcx-risc.h
|
|
|
bw-qcam.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
bw-qcam.h
|
|
|
c-qcam.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
cafe_ccic-regs.h
|
|
|
cafe_ccic.c
|
V4L/DVB (9355): de-BKL cafe_ccic.c
|
2008-11-11 08:11:20 -02:00 |
cpia_pp.c
|
|
|
cpia_usb.c
|
|
|
cpia.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
cpia.h
|
|
|
cs53l32a.c
|
V4L/DVB (9822): cs53l32a: convert to v4l2_subdev.
|
2008-12-30 09:38:38 -02:00 |
cs5345.c
|
V4L/DVB (9967): cs5345: convert to v4l2_subdev and fix broken s_ctrl.
|
2008-12-30 09:39:33 -02:00 |
cs8420.h
|
|
|
cx2341x.c
|
|
|
dabusb.c
|
|
|
dabusb.h
|
|
|
font.h
|
|
|
hexium_gemini.c
|
|
|
hexium_orion.c
|
|
|
ibmmpeg2.h
|
|
|
indycam.c
|
|
|
indycam.h
|
|
|
ir-kbd-i2c.c
|
V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), dev_set_name()
|
2008-12-29 17:53:26 -02:00 |
Kconfig
|
V4L/DVB (9817): v4l: add new tvp514x I2C video decoder driver
|
2008-12-30 09:38:36 -02:00 |
ks0127.c
|
|
|
ks0127.h
|
|
|
m52790.c
|
V4L/DVB (9824): m52790: convert to v4l2_subdev.
|
2008-12-30 09:38:39 -02:00 |
Makefile
|
V4L/DVB (9820): v4l2: add v4l2_device and v4l2_subdev structs to the v4l2 framework.
|
2008-12-30 09:38:37 -02:00 |
meye.c
|
|
|
meye.h
|
|
|
msp3400-driver.c
|
V4L/DVB (9960): v4l2-subdev: ioctl ops should use unsigned for cmd arg.
|
2008-12-30 09:39:29 -02:00 |
msp3400-driver.h
|
V4L/DVB (9825): msp3400: convert to v4l2_subdev.
|
2008-12-30 09:38:39 -02:00 |
msp3400-kthreads.c
|
V4L/DVB (9825): msp3400: convert to v4l2_subdev.
|
2008-12-30 09:38:39 -02:00 |
mt9m001.c
|
V4L/DVB (9788): soc-camera: simplify naming
|
2008-12-30 09:38:23 -02:00 |
mt9m111.c
|
V4L/DVB (9788): soc-camera: simplify naming
|
2008-12-30 09:38:23 -02:00 |
mt9v022.c
|
V4L/DVB (9788): soc-camera: simplify naming
|
2008-12-30 09:38:23 -02:00 |
mxb.c
|
|
|
mxb.h
|
|
|
omap24xxcam-dma.c
|
V4L/DVB (9815): omap2: add OMAP2 camera driver.
|
2008-12-30 09:38:35 -02:00 |
omap24xxcam.c
|
V4L/DVB (9815): omap2: add OMAP2 camera driver.
|
2008-12-30 09:38:35 -02:00 |
omap24xxcam.h
|
V4L/DVB (9815): omap2: add OMAP2 camera driver.
|
2008-12-30 09:38:35 -02:00 |
ov511.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
ov511.h
|
|
|
ov772x.c
|
V4L/DVB (9788): soc-camera: simplify naming
|
2008-12-30 09:38:23 -02:00 |
ov7670.c
|
|
|
pms.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
pxa_camera.c
|
V4L/DVB (9791): pxa-camera: pixel format negotiation
|
2008-12-30 09:38:24 -02:00 |
s2255drv.c
|
V4L/DVB (9635): v4l: s2255drv fix firmware test on big-endian
|
2008-11-16 23:57:23 -02:00 |
saa711x_regs.h
|
|
|
saa717x.c
|
V4L/DVB (9828): saa717x: convert to v4l2_subdev.
|
2008-12-30 09:38:41 -02:00 |
saa5246a.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
saa5249.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
saa6588.c
|
|
|
saa7110.c
|
V4L/DVB (9372): Minor fixes to the saa7110 driver
|
2008-11-11 08:11:23 -02:00 |
saa7111.c
|
|
|
saa7114.c
|
|
|
saa7115.c
|
V4L/DVB (9826): saa7115: convert to v4l2_subdev.
|
2008-12-30 09:38:40 -02:00 |
saa7121.h
|
|
|
saa7127.c
|
V4L/DVB (9827): saa7127: convert to v4l2_subdev.
|
2008-12-30 09:38:40 -02:00 |
saa7146.h
|
|
|
saa7146reg.h
|
|
|
saa7185.c
|
|
|
saa7191.c
|
|
|
saa7191.h
|
|
|
se401.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
se401.h
|
|
|
sh_mobile_ceu_camera.c
|
V4L/DVB (9904): v4l: fix compile warning.
|
2008-12-30 09:39:12 -02:00 |
soc_camera_platform.c
|
V4L/DVB (9788): soc-camera: simplify naming
|
2008-12-30 09:38:23 -02:00 |
soc_camera.c
|
V4L/DVB (9790): soc-camera: pixel format negotiation - core support
|
2008-12-30 09:38:24 -02:00 |
stk-sensor.c
|
|
|
stk-webcam.c
|
V4L/DVB (9978): stkwebcam: Implement VIDIOC_ENUM_FRAMESIZES ioctl
|
2008-12-30 09:39:37 -02:00 |
stk-webcam.h
|
|
|
stradis.c
|
|
|
stv680.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
stv680.h
|
|
|
tcm825x.c
|
|
|
tcm825x.h
|
|
|
tda7432.c
|
V4L/DVB (9964): tda7432: convert to v4l2_subdev.
|
2008-12-30 09:39:31 -02:00 |
tda9840.c
|
V4L/DVB (9965): tda9840: convert to v4l2_subdev.
|
2008-12-30 09:39:32 -02:00 |
tda9840.h
|
|
|
tda9875.c
|
V4L/DVB (9966): tda9875: convert to v4l2_subdev.
|
2008-12-30 09:39:32 -02:00 |
tea6415c.c
|
V4L/DVB (9961): tea6415c: convert to v4l2_subdev.
|
2008-12-30 09:39:30 -02:00 |
tea6415c.h
|
|
|
tea6420.c
|
V4L/DVB (9962): tea6420: convert to v4l2_subdev.
|
2008-12-30 09:39:30 -02:00 |
tea6420.h
|
|
|
tlv320aic23b.c
|
V4L/DVB (9963): tlv320aic23b: convert to v4l2_subdev.
|
2008-12-30 09:39:31 -02:00 |
tuner-core.c
|
V4L/DVB (9960): v4l2-subdev: ioctl ops should use unsigned for cmd arg.
|
2008-12-30 09:39:29 -02:00 |
tvaudio.c
|
V4L/DVB (9959): tvaudio: convert to v4l2_subdev.
|
2008-12-30 09:39:29 -02:00 |
tveeprom.c
|
|
|
tvp514x_regs.h
|
V4L/DVB (9817): v4l: add new tvp514x I2C video decoder driver
|
2008-12-30 09:38:36 -02:00 |
tvp514x.c
|
V4L/DVB (9817): v4l: add new tvp514x I2C video decoder driver
|
2008-12-30 09:38:36 -02:00 |
tvp5150_reg.h
|
|
|
tvp5150.c
|
V4L/DVB (9969): tvp5150: add support for VIDIOC_G_CHIP_IDENT ioctl
|
2008-12-30 09:39:33 -02:00 |
upd64031a.c
|
V4L/DVB (9830): upd64031a: convert to v4l2_subdev.
|
2008-12-30 09:38:42 -02:00 |
upd64083.c
|
V4L/DVB (9831): upd64083: convert to v4l2_subdev.
|
2008-12-30 09:38:42 -02:00 |
v4l1-compat.c
|
|
|
v4l2-common.c
|
V4L/DVB (9899): v4l2: Add missing control names
|
2008-12-30 09:39:10 -02:00 |
v4l2-compat-ioctl32.c
|
V4L/DVB (9934): v4l2-compat32: add two additional #ifdef __OLD_VIDIOC_ lines
|
2008-12-30 09:39:23 -02:00 |
v4l2-dev.c
|
V4L/DVB (9974): v4l2-dev: allow drivers to pass v4l2_device as parent
|
2008-12-30 09:39:35 -02:00 |
v4l2-device.c
|
V4L/DVB (9820): v4l2: add v4l2_device and v4l2_subdev structs to the v4l2 framework.
|
2008-12-30 09:38:37 -02:00 |
v4l2-int-device.c
|
|
|
v4l2-ioctl.c
|
V4L/DVB (9591): v4l core: fix debug printk for enumberating framerates
|
2008-12-29 17:53:33 -02:00 |
v4l2-subdev.c
|
V4L/DVB (9957): v4l2-subdev: add g_sliced_vbi_cap and add NULL pointer checks
|
2008-12-30 09:39:28 -02:00 |
videobuf-core.c
|
|
|
videobuf-dma-contig.c
|
|
|
videobuf-dma-sg.c
|
|
|
videobuf-dvb.c
|
|
|
videobuf-vmalloc.c
|
|
|
vino.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
vino.h
|
|
|
vivi.c
|
|
|
vp27smpx.c
|
V4L/DVB (9832): vp27smpx: convert to v4l2_subdev.
|
2008-12-30 09:38:43 -02:00 |
vpx3220.c
|
|
|
w9966.c
|
V4L/DVB (9503): v4l: remove inode argument from video_usercopy
|
2008-12-29 17:53:26 -02:00 |
w9968cf_decoder.h
|
|
|
w9968cf_vpp.h
|
|
|
w9968cf.c
|
|
|
w9968cf.h
|
|
|
wm8739.c
|
V4L/DVB (9833): wm8739: convert to v4l2_subdev.
|
2008-12-30 09:38:43 -02:00 |
wm8775.c
|
V4L/DVB (9834): wm8775: convert to v4l2_subdev.
|
2008-12-30 09:38:44 -02:00 |
zr364xx.c
|
|
|