b98348bdd0
Teach AVR32 to use the "GPIO Library" when exposing its GPIOs, so that signals on external chips (like GPIO expanders) can easily be used. This mostly reorganizes some existing logic, with two minor changes in behavior: - The PSR registers are used instead of the previous "gpio_mask" values, matching AT91 behavior and removing some duplication between that role and that of "pinmux_mask". - NR_IRQs grew to acommodate a bank of external GPIOs. Eventually this number should probably become a board-specific config option. There's a debugfs dump of status for the built-in GPIOs, showing which pins have deglitching, pullups, or open drain drive enabled, as well as the ID string used when requesting each IRQ. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
431 lines
9.2 KiB
C
431 lines
9.2 KiB
C
/*
|
|
* Atmel PIO2 Port Multiplexer support
|
|
*
|
|
* Copyright (C) 2004-2006 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/arch/portmux.h>
|
|
|
|
#include "pio.h"
|
|
|
|
#define MAX_NR_PIO_DEVICES 8
|
|
|
|
struct pio_device {
|
|
struct gpio_chip chip;
|
|
void __iomem *regs;
|
|
const struct platform_device *pdev;
|
|
struct clk *clk;
|
|
u32 pinmux_mask;
|
|
char name[8];
|
|
};
|
|
|
|
static struct pio_device pio_dev[MAX_NR_PIO_DEVICES];
|
|
|
|
static struct pio_device *gpio_to_pio(unsigned int gpio)
|
|
{
|
|
struct pio_device *pio;
|
|
unsigned int index;
|
|
|
|
index = gpio >> 5;
|
|
if (index >= MAX_NR_PIO_DEVICES)
|
|
return NULL;
|
|
pio = &pio_dev[index];
|
|
if (!pio->regs)
|
|
return NULL;
|
|
|
|
return pio;
|
|
}
|
|
|
|
/* Pin multiplexing API */
|
|
|
|
void __init at32_select_periph(unsigned int pin, unsigned int periph,
|
|
unsigned long flags)
|
|
{
|
|
struct pio_device *pio;
|
|
unsigned int pin_index = pin & 0x1f;
|
|
u32 mask = 1 << pin_index;
|
|
|
|
pio = gpio_to_pio(pin);
|
|
if (unlikely(!pio)) {
|
|
printk("pio: invalid pin %u\n", pin);
|
|
goto fail;
|
|
}
|
|
|
|
if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask)
|
|
|| gpiochip_is_requested(&pio->chip, pin_index))) {
|
|
printk("%s: pin %u is busy\n", pio->name, pin_index);
|
|
goto fail;
|
|
}
|
|
|
|
pio_writel(pio, PUER, mask);
|
|
if (periph)
|
|
pio_writel(pio, BSR, mask);
|
|
else
|
|
pio_writel(pio, ASR, mask);
|
|
|
|
pio_writel(pio, PDR, mask);
|
|
if (!(flags & AT32_GPIOF_PULLUP))
|
|
pio_writel(pio, PUDR, mask);
|
|
|
|
return;
|
|
|
|
fail:
|
|
dump_stack();
|
|
}
|
|
|
|
void __init at32_select_gpio(unsigned int pin, unsigned long flags)
|
|
{
|
|
struct pio_device *pio;
|
|
unsigned int pin_index = pin & 0x1f;
|
|
u32 mask = 1 << pin_index;
|
|
|
|
pio = gpio_to_pio(pin);
|
|
if (unlikely(!pio)) {
|
|
printk("pio: invalid pin %u\n", pin);
|
|
goto fail;
|
|
}
|
|
|
|
if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
|
|
printk("%s: pin %u is busy\n", pio->name, pin_index);
|
|
goto fail;
|
|
}
|
|
|
|
if (flags & AT32_GPIOF_OUTPUT) {
|
|
if (flags & AT32_GPIOF_HIGH)
|
|
pio_writel(pio, SODR, mask);
|
|
else
|
|
pio_writel(pio, CODR, mask);
|
|
if (flags & AT32_GPIOF_MULTIDRV)
|
|
pio_writel(pio, MDER, mask);
|
|
else
|
|
pio_writel(pio, MDDR, mask);
|
|
pio_writel(pio, PUDR, mask);
|
|
pio_writel(pio, OER, mask);
|
|
} else {
|
|
if (flags & AT32_GPIOF_PULLUP)
|
|
pio_writel(pio, PUER, mask);
|
|
else
|
|
pio_writel(pio, PUDR, mask);
|
|
if (flags & AT32_GPIOF_DEGLITCH)
|
|
pio_writel(pio, IFER, mask);
|
|
else
|
|
pio_writel(pio, IFDR, mask);
|
|
pio_writel(pio, ODR, mask);
|
|
}
|
|
|
|
pio_writel(pio, PER, mask);
|
|
|
|
return;
|
|
|
|
fail:
|
|
dump_stack();
|
|
}
|
|
|
|
/* Reserve a pin, preventing anyone else from changing its configuration. */
|
|
void __init at32_reserve_pin(unsigned int pin)
|
|
{
|
|
struct pio_device *pio;
|
|
unsigned int pin_index = pin & 0x1f;
|
|
|
|
pio = gpio_to_pio(pin);
|
|
if (unlikely(!pio)) {
|
|
printk("pio: invalid pin %u\n", pin);
|
|
goto fail;
|
|
}
|
|
|
|
if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
|
|
printk("%s: pin %u is busy\n", pio->name, pin_index);
|
|
goto fail;
|
|
}
|
|
|
|
return;
|
|
|
|
fail:
|
|
dump_stack();
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/* GPIO API */
|
|
|
|
static int direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct pio_device *pio = container_of(chip, struct pio_device, chip);
|
|
u32 mask = 1 << offset;
|
|
|
|
if (!(pio_readl(pio, PSR) & mask))
|
|
return -EINVAL;
|
|
|
|
pio_writel(pio, ODR, mask);
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct pio_device *pio = container_of(chip, struct pio_device, chip);
|
|
|
|
return (pio_readl(pio, PDSR) >> offset) & 1;
|
|
}
|
|
|
|
static void gpio_set(struct gpio_chip *chip, unsigned offset, int value);
|
|
|
|
static int direction_output(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct pio_device *pio = container_of(chip, struct pio_device, chip);
|
|
u32 mask = 1 << offset;
|
|
|
|
if (!(pio_readl(pio, PSR) & mask))
|
|
return -EINVAL;
|
|
|
|
gpio_set(chip, offset, value);
|
|
pio_writel(pio, OER, mask);
|
|
return 0;
|
|
}
|
|
|
|
static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct pio_device *pio = container_of(chip, struct pio_device, chip);
|
|
u32 mask = 1 << offset;
|
|
|
|
if (value)
|
|
pio_writel(pio, SODR, mask);
|
|
else
|
|
pio_writel(pio, CODR, mask);
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/* GPIO IRQ support */
|
|
|
|
static void gpio_irq_mask(unsigned irq)
|
|
{
|
|
unsigned gpio = irq_to_gpio(irq);
|
|
struct pio_device *pio = &pio_dev[gpio >> 5];
|
|
|
|
pio_writel(pio, IDR, 1 << (gpio & 0x1f));
|
|
}
|
|
|
|
static void gpio_irq_unmask(unsigned irq)
|
|
{
|
|
unsigned gpio = irq_to_gpio(irq);
|
|
struct pio_device *pio = &pio_dev[gpio >> 5];
|
|
|
|
pio_writel(pio, IER, 1 << (gpio & 0x1f));
|
|
}
|
|
|
|
static int gpio_irq_type(unsigned irq, unsigned type)
|
|
{
|
|
if (type != IRQ_TYPE_EDGE_BOTH && type != IRQ_TYPE_NONE)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip gpio_irqchip = {
|
|
.name = "gpio",
|
|
.mask = gpio_irq_mask,
|
|
.unmask = gpio_irq_unmask,
|
|
.set_type = gpio_irq_type,
|
|
};
|
|
|
|
static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
|
|
{
|
|
struct pio_device *pio = get_irq_chip_data(irq);
|
|
unsigned gpio_irq;
|
|
|
|
gpio_irq = (unsigned) get_irq_data(irq);
|
|
for (;;) {
|
|
u32 isr;
|
|
struct irq_desc *d;
|
|
|
|
/* ack pending GPIO interrupts */
|
|
isr = pio_readl(pio, ISR) & pio_readl(pio, IMR);
|
|
if (!isr)
|
|
break;
|
|
do {
|
|
int i;
|
|
|
|
i = ffs(isr) - 1;
|
|
isr &= ~(1 << i);
|
|
|
|
i += gpio_irq;
|
|
d = &irq_desc[i];
|
|
|
|
d->handle_irq(i, d);
|
|
} while (isr);
|
|
}
|
|
}
|
|
|
|
static void __init
|
|
gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq)
|
|
{
|
|
unsigned i;
|
|
|
|
set_irq_chip_data(irq, pio);
|
|
set_irq_data(irq, (void *) gpio_irq);
|
|
|
|
for (i = 0; i < 32; i++, gpio_irq++) {
|
|
set_irq_chip_data(gpio_irq, pio);
|
|
set_irq_chip_and_handler(gpio_irq, &gpio_irqchip,
|
|
handle_simple_irq);
|
|
}
|
|
|
|
set_irq_chained_handler(irq, gpio_irq_handler);
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
/*
|
|
* This shows more info than the generic gpio dump code:
|
|
* pullups, deglitching, open drain drive.
|
|
*/
|
|
static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
struct pio_device *pio = container_of(chip, struct pio_device, chip);
|
|
u32 psr, osr, imr, pdsr, pusr, ifsr, mdsr;
|
|
unsigned i;
|
|
u32 mask;
|
|
char bank;
|
|
|
|
psr = pio_readl(pio, PSR);
|
|
osr = pio_readl(pio, OSR);
|
|
imr = pio_readl(pio, IMR);
|
|
pdsr = pio_readl(pio, PDSR);
|
|
pusr = pio_readl(pio, PUSR);
|
|
ifsr = pio_readl(pio, IFSR);
|
|
mdsr = pio_readl(pio, MDSR);
|
|
|
|
bank = 'A' + pio->pdev->id;
|
|
|
|
for (i = 0, mask = 1; i < 32; i++, mask <<= 1) {
|
|
const char *label;
|
|
|
|
label = gpiochip_is_requested(chip, i);
|
|
if (!label)
|
|
continue;
|
|
|
|
seq_printf(s, " gpio-%-3d P%c%-2d (%-12s) %s %s %s",
|
|
chip->base + i, bank, i,
|
|
label,
|
|
(osr & mask) ? "out" : "in ",
|
|
(mask & pdsr) ? "hi" : "lo",
|
|
(mask & pusr) ? " " : "up");
|
|
if (ifsr & mask)
|
|
seq_printf(s, " deglitch");
|
|
if ((osr & mdsr) & mask)
|
|
seq_printf(s, " open-drain");
|
|
if (imr & mask)
|
|
seq_printf(s, " irq-%d edge-both",
|
|
gpio_to_irq(chip->base + i));
|
|
seq_printf(s, "\n");
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define pio_bank_show NULL
|
|
#endif
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static int __init pio_probe(struct platform_device *pdev)
|
|
{
|
|
struct pio_device *pio = NULL;
|
|
int irq = platform_get_irq(pdev, 0);
|
|
int gpio_irq_base = GPIO_IRQ_BASE + pdev->id * 32;
|
|
|
|
BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES);
|
|
pio = &pio_dev[pdev->id];
|
|
BUG_ON(!pio->regs);
|
|
|
|
pio->chip.label = pio->name;
|
|
pio->chip.base = pdev->id * 32;
|
|
pio->chip.ngpio = 32;
|
|
|
|
pio->chip.direction_input = direction_input;
|
|
pio->chip.get = gpio_get;
|
|
pio->chip.direction_output = direction_output;
|
|
pio->chip.set = gpio_set;
|
|
pio->chip.dbg_show = pio_bank_show;
|
|
|
|
gpiochip_add(&pio->chip);
|
|
|
|
gpio_irq_setup(pio, irq, gpio_irq_base);
|
|
|
|
platform_set_drvdata(pdev, pio);
|
|
|
|
printk(KERN_DEBUG "%s: base 0x%p, irq %d chains %d..%d\n",
|
|
pio->name, pio->regs, irq, gpio_irq_base, gpio_irq_base + 31);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver pio_driver = {
|
|
.probe = pio_probe,
|
|
.driver = {
|
|
.name = "pio",
|
|
},
|
|
};
|
|
|
|
static int __init pio_init(void)
|
|
{
|
|
return platform_driver_register(&pio_driver);
|
|
}
|
|
postcore_initcall(pio_init);
|
|
|
|
void __init at32_init_pio(struct platform_device *pdev)
|
|
{
|
|
struct resource *regs;
|
|
struct pio_device *pio;
|
|
|
|
if (pdev->id > MAX_NR_PIO_DEVICES) {
|
|
dev_err(&pdev->dev, "only %d PIO devices supported\n",
|
|
MAX_NR_PIO_DEVICES);
|
|
return;
|
|
}
|
|
|
|
pio = &pio_dev[pdev->id];
|
|
snprintf(pio->name, sizeof(pio->name), "pio%d", pdev->id);
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!regs) {
|
|
dev_err(&pdev->dev, "no mmio resource defined\n");
|
|
return;
|
|
}
|
|
|
|
pio->clk = clk_get(&pdev->dev, "mck");
|
|
if (IS_ERR(pio->clk))
|
|
/*
|
|
* This is a fatal error, but if we continue we might
|
|
* be so lucky that we manage to initialize the
|
|
* console and display this message...
|
|
*/
|
|
dev_err(&pdev->dev, "no mck clock defined\n");
|
|
else
|
|
clk_enable(pio->clk);
|
|
|
|
pio->pdev = pdev;
|
|
pio->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
|
|
/* start with irqs disabled and acked */
|
|
pio_writel(pio, IDR, ~0UL);
|
|
(void) pio_readl(pio, ISR);
|
|
}
|