1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2304 lines
62 KiB
C
2304 lines
62 KiB
C
/*
|
|
planb - PlanB frame grabber driver
|
|
|
|
PlanB is used in the 7x00/8x00 series of PowerMacintosh
|
|
Computers as video input DMA controller.
|
|
|
|
Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
|
|
|
|
Based largely on the bttv driver by Ralph Metzler (rjkm@thp.uni-koeln.de)
|
|
|
|
Additional debugging and coding by Takashi Oe (toe@unlserve.unl.edu)
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/* $Id: planb.c,v 1.18 1999/05/02 17:36:34 mlan Exp $ */
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/major.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/videodev.h>
|
|
#include <linux/wait.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/dbdma.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/semaphore.h>
|
|
|
|
#include "planb.h"
|
|
#include "saa7196.h"
|
|
|
|
/* Would you mind for some ugly debugging? */
|
|
#if 0
|
|
#define DEBUG(x...) printk(KERN_DEBUG ## x) /* Debug driver */
|
|
#else
|
|
#define DEBUG(x...) /* Don't debug driver */
|
|
#endif
|
|
|
|
#if 0
|
|
#define IDEBUG(x...) printk(KERN_DEBUG ## x) /* Debug interrupt part */
|
|
#else
|
|
#define IDEBUG(x...) /* Don't debug interrupt part */
|
|
#endif
|
|
|
|
/* Ever seen a Mac with more than 1 of these? */
|
|
#define PLANB_MAX 1
|
|
|
|
static int planb_num;
|
|
static struct planb planbs[PLANB_MAX];
|
|
static volatile struct planb_registers *planb_regs;
|
|
|
|
static int def_norm = PLANB_DEF_NORM; /* default norm */
|
|
static int video_nr = -1;
|
|
|
|
MODULE_PARM(def_norm, "i");
|
|
MODULE_PARM_DESC(def_norm, "Default startup norm (0=PAL, 1=NTSC, 2=SECAM)");
|
|
MODULE_PARM(video_nr,"i");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
/* ------------------ PlanB Exported Functions ------------------ */
|
|
static long planb_write(struct video_device *, const char *, unsigned long, int);
|
|
static long planb_read(struct video_device *, char *, unsigned long, int);
|
|
static int planb_open(struct video_device *, int);
|
|
static void planb_close(struct video_device *);
|
|
static int planb_ioctl(struct video_device *, unsigned int, void *);
|
|
static int planb_init_done(struct video_device *);
|
|
static int planb_mmap(struct video_device *, const char *, unsigned long);
|
|
static void planb_irq(int, void *, struct pt_regs *);
|
|
static void release_planb(void);
|
|
int init_planbs(struct video_init *);
|
|
|
|
/* ------------------ PlanB Internal Functions ------------------ */
|
|
static int planb_prepare_open(struct planb *);
|
|
static void planb_prepare_close(struct planb *);
|
|
static void saa_write_reg(unsigned char, unsigned char);
|
|
static unsigned char saa_status(int, struct planb *);
|
|
static void saa_set(unsigned char, unsigned char, struct planb *);
|
|
static void saa_init_regs(struct planb *);
|
|
static int grabbuf_alloc(struct planb *);
|
|
static int vgrab(struct planb *, struct video_mmap *);
|
|
static void add_clip(struct planb *, struct video_clip *);
|
|
static void fill_cmd_buff(struct planb *);
|
|
static void cmd_buff(struct planb *);
|
|
static volatile struct dbdma_cmd *setup_grab_cmd(int, struct planb *);
|
|
static void overlay_start(struct planb *);
|
|
static void overlay_stop(struct planb *);
|
|
static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *, unsigned short,
|
|
unsigned int);
|
|
static inline void tab_cmd_store(volatile struct dbdma_cmd *, unsigned int,
|
|
unsigned int);
|
|
static inline void tab_cmd_gen(volatile struct dbdma_cmd *, unsigned short,
|
|
unsigned short, unsigned int, unsigned int);
|
|
static int init_planb(struct planb *);
|
|
static int find_planb(void);
|
|
static void planb_pre_capture(int, int, struct planb *);
|
|
static volatile struct dbdma_cmd *cmd_geo_setup(volatile struct dbdma_cmd *,
|
|
int, int, int, int, int, struct planb *);
|
|
static inline void planb_dbdma_stop(volatile struct dbdma_regs *);
|
|
static unsigned int saa_geo_setup(int, int, int, int, struct planb *);
|
|
static inline int overlay_is_active(struct planb *);
|
|
|
|
/*******************************/
|
|
/* Memory management functions */
|
|
/*******************************/
|
|
|
|
static int grabbuf_alloc(struct planb *pb)
|
|
{
|
|
int i, npage;
|
|
|
|
npage = MAX_GBUFFERS * ((PLANB_MAX_FBUF / PAGE_SIZE + 1)
|
|
#ifndef PLANB_GSCANLINE
|
|
+ MAX_LNUM
|
|
#endif /* PLANB_GSCANLINE */
|
|
);
|
|
if ((pb->rawbuf = (unsigned char**) kmalloc (npage
|
|
* sizeof(unsigned long), GFP_KERNEL)) == 0)
|
|
return -ENOMEM;
|
|
for (i = 0; i < npage; i++) {
|
|
pb->rawbuf[i] = (unsigned char *)__get_free_pages(GFP_KERNEL
|
|
|GFP_DMA, 0);
|
|
if (!pb->rawbuf[i])
|
|
break;
|
|
SetPageReserved(virt_to_page(pb->rawbuf[i]));
|
|
}
|
|
if (i-- < npage) {
|
|
printk(KERN_DEBUG "PlanB: init_grab: grab buffer not allocated\n");
|
|
for (; i > 0; i--) {
|
|
ClearPageReserved(virt_to_page(pb->rawbuf[i]));
|
|
free_pages((unsigned long)pb->rawbuf[i], 0);
|
|
}
|
|
kfree(pb->rawbuf);
|
|
return -ENOBUFS;
|
|
}
|
|
pb->rawbuf_size = npage;
|
|
return 0;
|
|
}
|
|
|
|
/*****************************/
|
|
/* Hardware access functions */
|
|
/*****************************/
|
|
|
|
static void saa_write_reg(unsigned char addr, unsigned char val)
|
|
{
|
|
planb_regs->saa_addr = addr; eieio();
|
|
planb_regs->saa_regval = val; eieio();
|
|
return;
|
|
}
|
|
|
|
/* return status byte 0 or 1: */
|
|
static unsigned char saa_status(int byte, struct planb *pb)
|
|
{
|
|
saa_regs[pb->win.norm][SAA7196_STDC] =
|
|
(saa_regs[pb->win.norm][SAA7196_STDC] & ~2) | ((byte & 1) << 1);
|
|
saa_write_reg (SAA7196_STDC, saa_regs[pb->win.norm][SAA7196_STDC]);
|
|
|
|
/* Let's wait 30msec for this one */
|
|
msleep_interruptible(30);
|
|
|
|
return (unsigned char)in_8 (&planb_regs->saa_status);
|
|
}
|
|
|
|
static void saa_set(unsigned char addr, unsigned char val, struct planb *pb)
|
|
{
|
|
if(saa_regs[pb->win.norm][addr] != val) {
|
|
saa_regs[pb->win.norm][addr] = val;
|
|
saa_write_reg (addr, val);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void saa_init_regs(struct planb *pb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < SAA7196_NUMREGS; i++)
|
|
saa_write_reg (i, saa_regs[pb->win.norm][i]);
|
|
}
|
|
|
|
static unsigned int saa_geo_setup(int width, int height, int interlace, int bpp,
|
|
struct planb *pb)
|
|
{
|
|
int ht, norm = pb->win.norm;
|
|
|
|
switch(bpp) {
|
|
case 2:
|
|
/* RGB555+a 1x16-bit + 16-bit transparent */
|
|
saa_regs[norm][SAA7196_FMTS] &= ~0x3;
|
|
break;
|
|
case 1:
|
|
case 4:
|
|
/* RGB888 1x24-bit + 8-bit transparent */
|
|
saa_regs[norm][SAA7196_FMTS] &= ~0x1;
|
|
saa_regs[norm][SAA7196_FMTS] |= 0x2;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
ht = (interlace ? height / 2 : height);
|
|
saa_regs[norm][SAA7196_OUTPIX] = (unsigned char) (width & 0x00ff);
|
|
saa_regs[norm][SAA7196_HFILT] = (saa_regs[norm][SAA7196_HFILT] & ~0x3)
|
|
| (width >> 8 & 0x3);
|
|
saa_regs[norm][SAA7196_OUTLINE] = (unsigned char) (ht & 0xff);
|
|
saa_regs[norm][SAA7196_VYP] = (saa_regs[norm][SAA7196_VYP] & ~0x3)
|
|
| (ht >> 8 & 0x3);
|
|
/* feed both fields if interlaced, or else feed only even fields */
|
|
saa_regs[norm][SAA7196_FMTS] = (interlace) ?
|
|
(saa_regs[norm][SAA7196_FMTS] & ~0x60)
|
|
: (saa_regs[norm][SAA7196_FMTS] | 0x60);
|
|
/* transparent mode; extended format enabled */
|
|
saa_regs[norm][SAA7196_DPATH] |= 0x3;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/***************************/
|
|
/* DBDMA support functions */
|
|
/***************************/
|
|
|
|
static inline void planb_dbdma_restart(volatile struct dbdma_regs *ch)
|
|
{
|
|
out_le32(&ch->control, PLANB_CLR(RUN));
|
|
out_le32(&ch->control, PLANB_SET(RUN|WAKE) | PLANB_CLR(PAUSE));
|
|
}
|
|
|
|
static inline void planb_dbdma_stop(volatile struct dbdma_regs *ch)
|
|
{
|
|
int i = 0;
|
|
|
|
out_le32(&ch->control, PLANB_CLR(RUN) | PLANB_SET(FLUSH));
|
|
while((in_le32(&ch->status) == (ACTIVE | FLUSH)) && (i < 999)) {
|
|
IDEBUG("PlanB: waiting for DMA to stop\n");
|
|
i++;
|
|
}
|
|
}
|
|
|
|
static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *ch,
|
|
unsigned short command, unsigned int cmd_dep)
|
|
{
|
|
st_le16(&ch->command, command);
|
|
st_le32(&ch->cmd_dep, cmd_dep);
|
|
}
|
|
|
|
static inline void tab_cmd_store(volatile struct dbdma_cmd *ch,
|
|
unsigned int phy_addr, unsigned int cmd_dep)
|
|
{
|
|
st_le16(&ch->command, STORE_WORD | KEY_SYSTEM);
|
|
st_le16(&ch->req_count, 4);
|
|
st_le32(&ch->phy_addr, phy_addr);
|
|
st_le32(&ch->cmd_dep, cmd_dep);
|
|
}
|
|
|
|
static inline void tab_cmd_gen(volatile struct dbdma_cmd *ch,
|
|
unsigned short command, unsigned short req_count,
|
|
unsigned int phy_addr, unsigned int cmd_dep)
|
|
{
|
|
st_le16(&ch->command, command);
|
|
st_le16(&ch->req_count, req_count);
|
|
st_le32(&ch->phy_addr, phy_addr);
|
|
st_le32(&ch->cmd_dep, cmd_dep);
|
|
}
|
|
|
|
static volatile struct dbdma_cmd *cmd_geo_setup(
|
|
volatile struct dbdma_cmd *c1, int width, int height, int interlace,
|
|
int bpp, int clip, struct planb *pb)
|
|
{
|
|
int norm = pb->win.norm;
|
|
|
|
if((saa_geo_setup(width, height, interlace, bpp, pb)) != 0)
|
|
return (volatile struct dbdma_cmd *)NULL;
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
|
|
SAA7196_FMTS);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
|
|
saa_regs[norm][SAA7196_FMTS]);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
|
|
SAA7196_DPATH);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
|
|
saa_regs[norm][SAA7196_DPATH]);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->even),
|
|
bpp | ((clip)? PLANB_CLIPMASK: 0));
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->odd),
|
|
bpp | ((clip)? PLANB_CLIPMASK: 0));
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
|
|
SAA7196_OUTPIX);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
|
|
saa_regs[norm][SAA7196_OUTPIX]);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
|
|
SAA7196_HFILT);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
|
|
saa_regs[norm][SAA7196_HFILT]);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
|
|
SAA7196_OUTLINE);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
|
|
saa_regs[norm][SAA7196_OUTLINE]);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr),
|
|
SAA7196_VYP);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval),
|
|
saa_regs[norm][SAA7196_VYP]);
|
|
return c1;
|
|
}
|
|
|
|
/******************************/
|
|
/* misc. supporting functions */
|
|
/******************************/
|
|
|
|
static inline void planb_lock(struct planb *pb)
|
|
{
|
|
down(&pb->lock);
|
|
}
|
|
|
|
static inline void planb_unlock(struct planb *pb)
|
|
{
|
|
up(&pb->lock);
|
|
}
|
|
|
|
/***************/
|
|
/* Driver Core */
|
|
/***************/
|
|
|
|
static int planb_prepare_open(struct planb *pb)
|
|
{
|
|
int i, size;
|
|
|
|
/* allocate memory for two plus alpha command buffers (size: max lines,
|
|
plus 40 commands handling, plus 1 alignment), plus dummy command buf,
|
|
plus clipmask buffer, plus frame grabbing status */
|
|
size = (pb->tab_size*(2+MAX_GBUFFERS*TAB_FACTOR)+1+MAX_GBUFFERS
|
|
* PLANB_DUMMY)*sizeof(struct dbdma_cmd)
|
|
+(PLANB_MAXLINES*((PLANB_MAXPIXELS+7)& ~7))/8
|
|
+MAX_GBUFFERS*sizeof(unsigned int);
|
|
if ((pb->priv_space = kmalloc (size, GFP_KERNEL)) == 0)
|
|
return -ENOMEM;
|
|
memset ((void *) pb->priv_space, 0, size);
|
|
pb->overlay_last1 = pb->ch1_cmd = (volatile struct dbdma_cmd *)
|
|
DBDMA_ALIGN (pb->priv_space);
|
|
pb->overlay_last2 = pb->ch2_cmd = pb->ch1_cmd + pb->tab_size;
|
|
pb->ch1_cmd_phys = virt_to_bus(pb->ch1_cmd);
|
|
pb->cap_cmd[0] = pb->ch2_cmd + pb->tab_size;
|
|
pb->pre_cmd[0] = pb->cap_cmd[0] + pb->tab_size * TAB_FACTOR;
|
|
for (i = 1; i < MAX_GBUFFERS; i++) {
|
|
pb->cap_cmd[i] = pb->pre_cmd[i-1] + PLANB_DUMMY;
|
|
pb->pre_cmd[i] = pb->cap_cmd[i] + pb->tab_size * TAB_FACTOR;
|
|
}
|
|
pb->frame_stat=(volatile unsigned int *)(pb->pre_cmd[MAX_GBUFFERS-1]
|
|
+ PLANB_DUMMY);
|
|
pb->mask = (unsigned char *)(pb->frame_stat+MAX_GBUFFERS);
|
|
|
|
pb->rawbuf = NULL;
|
|
pb->rawbuf_size = 0;
|
|
pb->grabbing = 0;
|
|
for (i = 0; i < MAX_GBUFFERS; i++) {
|
|
pb->frame_stat[i] = GBUFFER_UNUSED;
|
|
pb->gwidth[i] = 0;
|
|
pb->gheight[i] = 0;
|
|
pb->gfmt[i] = 0;
|
|
pb->gnorm_switch[i] = 0;
|
|
#ifndef PLANB_GSCANLINE
|
|
pb->lsize[i] = 0;
|
|
pb->lnum[i] = 0;
|
|
#endif /* PLANB_GSCANLINE */
|
|
}
|
|
pb->gcount = 0;
|
|
pb->suspend = 0;
|
|
pb->last_fr = -999;
|
|
pb->prev_last_fr = -999;
|
|
|
|
/* Reset DMA controllers */
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void planb_prepare_close(struct planb *pb)
|
|
{
|
|
int i;
|
|
|
|
/* make sure the dma's are idle */
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
/* free kernel memory of command buffers */
|
|
if(pb->priv_space != 0) {
|
|
kfree (pb->priv_space);
|
|
pb->priv_space = 0;
|
|
pb->cmd_buff_inited = 0;
|
|
}
|
|
if(pb->rawbuf) {
|
|
for (i = 0; i < pb->rawbuf_size; i++) {
|
|
ClearPageReserved(virt_to_page(pb->rawbuf[i]));
|
|
free_pages((unsigned long)pb->rawbuf[i], 0);
|
|
}
|
|
kfree(pb->rawbuf);
|
|
}
|
|
pb->rawbuf = NULL;
|
|
}
|
|
|
|
/*****************************/
|
|
/* overlay support functions */
|
|
/*****************************/
|
|
|
|
static inline int overlay_is_active(struct planb *pb)
|
|
{
|
|
unsigned int size = pb->tab_size * sizeof(struct dbdma_cmd);
|
|
unsigned int caddr = (unsigned)in_le32(&pb->planb_base->ch1.cmdptr);
|
|
|
|
return (in_le32(&pb->overlay_last1->cmd_dep) == pb->ch1_cmd_phys)
|
|
&& (caddr < (pb->ch1_cmd_phys + size))
|
|
&& (caddr >= (unsigned)pb->ch1_cmd_phys);
|
|
}
|
|
|
|
static void overlay_start(struct planb *pb)
|
|
{
|
|
|
|
DEBUG("PlanB: overlay_start()\n");
|
|
|
|
if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
|
|
|
|
DEBUG("PlanB: presumably, grabbing is in progress...\n");
|
|
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
out_le32 (&pb->planb_base->ch2.cmdptr,
|
|
virt_to_bus(pb->ch2_cmd));
|
|
planb_dbdma_restart(&pb->planb_base->ch2);
|
|
st_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
|
|
tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->ch1_cmd));
|
|
eieio();
|
|
pb->prev_last_fr = pb->last_fr;
|
|
pb->last_fr = -2;
|
|
if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
|
|
IDEBUG("PlanB: became inactive "
|
|
"in the mean time... reactivating\n");
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
out_le32 (&pb->planb_base->ch1.cmdptr,
|
|
virt_to_bus(pb->ch1_cmd));
|
|
planb_dbdma_restart(&pb->planb_base->ch1);
|
|
}
|
|
} else {
|
|
|
|
DEBUG("PlanB: currently idle, so can do whatever\n");
|
|
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
st_le32 (&pb->planb_base->ch2.cmdptr,
|
|
virt_to_bus(pb->ch2_cmd));
|
|
st_le32 (&pb->planb_base->ch1.cmdptr,
|
|
virt_to_bus(pb->ch1_cmd));
|
|
out_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
|
|
planb_dbdma_restart(&pb->planb_base->ch2);
|
|
planb_dbdma_restart(&pb->planb_base->ch1);
|
|
pb->last_fr = -1;
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void overlay_stop(struct planb *pb)
|
|
{
|
|
DEBUG("PlanB: overlay_stop()\n");
|
|
|
|
if(pb->last_fr == -1) {
|
|
|
|
DEBUG("PlanB: no grabbing, it seems...\n");
|
|
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
pb->last_fr = -999;
|
|
} else if(pb->last_fr == -2) {
|
|
unsigned int cmd_dep;
|
|
tab_cmd_dbdma(pb->cap_cmd[pb->prev_last_fr], DBDMA_STOP, 0);
|
|
eieio();
|
|
cmd_dep = (unsigned int)in_le32(&pb->overlay_last1->cmd_dep);
|
|
if(overlay_is_active(pb)) {
|
|
|
|
DEBUG("PlanB: overlay is currently active\n");
|
|
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
if(cmd_dep != pb->ch1_cmd_phys) {
|
|
out_le32(&pb->planb_base->ch1.cmdptr,
|
|
virt_to_bus(pb->overlay_last1));
|
|
planb_dbdma_restart(&pb->planb_base->ch1);
|
|
}
|
|
}
|
|
pb->last_fr = pb->prev_last_fr;
|
|
pb->prev_last_fr = -999;
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void suspend_overlay(struct planb *pb)
|
|
{
|
|
int fr = -1;
|
|
struct dbdma_cmd last;
|
|
|
|
DEBUG("PlanB: suspend_overlay: %d\n", pb->suspend);
|
|
|
|
if(pb->suspend++)
|
|
return;
|
|
if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
|
|
if(pb->last_fr == -2) {
|
|
fr = pb->prev_last_fr;
|
|
memcpy(&last, (void*)pb->last_cmd[fr], sizeof(last));
|
|
tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
|
|
}
|
|
if(overlay_is_active(pb)) {
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
pb->suspended.overlay = 1;
|
|
pb->suspended.frame = fr;
|
|
memcpy(&pb->suspended.cmd, &last, sizeof(last));
|
|
return;
|
|
}
|
|
}
|
|
pb->suspended.overlay = 0;
|
|
pb->suspended.frame = fr;
|
|
memcpy(&pb->suspended.cmd, &last, sizeof(last));
|
|
return;
|
|
}
|
|
|
|
static void resume_overlay(struct planb *pb)
|
|
{
|
|
|
|
DEBUG("PlanB: resume_overlay: %d\n", pb->suspend);
|
|
|
|
if(pb->suspend > 1)
|
|
return;
|
|
if(pb->suspended.frame != -1) {
|
|
memcpy((void*)pb->last_cmd[pb->suspended.frame],
|
|
&pb->suspended.cmd, sizeof(pb->suspended.cmd));
|
|
}
|
|
if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) {
|
|
goto finish;
|
|
}
|
|
if(pb->suspended.overlay) {
|
|
|
|
DEBUG("PlanB: overlay being resumed\n");
|
|
|
|
st_le16 (&pb->ch1_cmd->command, DBDMA_NOP);
|
|
st_le16 (&pb->ch2_cmd->command, DBDMA_NOP);
|
|
/* Set command buffer addresses */
|
|
st_le32(&pb->planb_base->ch1.cmdptr,
|
|
virt_to_bus(pb->overlay_last1));
|
|
out_le32(&pb->planb_base->ch2.cmdptr,
|
|
virt_to_bus(pb->overlay_last2));
|
|
/* Start the DMA controller */
|
|
out_le32 (&pb->planb_base->ch2.control,
|
|
PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
|
|
out_le32 (&pb->planb_base->ch1.control,
|
|
PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
|
|
} else if(pb->suspended.frame != -1) {
|
|
out_le32(&pb->planb_base->ch1.cmdptr,
|
|
virt_to_bus(pb->last_cmd[pb->suspended.frame]));
|
|
out_le32 (&pb->planb_base->ch1.control,
|
|
PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE));
|
|
}
|
|
|
|
finish:
|
|
pb->suspend--;
|
|
wake_up_interruptible(&pb->suspendq);
|
|
}
|
|
|
|
static void add_clip(struct planb *pb, struct video_clip *clip)
|
|
{
|
|
volatile unsigned char *base;
|
|
int xc = clip->x, yc = clip->y;
|
|
int wc = clip->width, hc = clip->height;
|
|
int ww = pb->win.width, hw = pb->win.height;
|
|
int x, y, xtmp1, xtmp2;
|
|
|
|
DEBUG("PlanB: clip %dx%d+%d+%d\n", wc, hc, xc, yc);
|
|
|
|
if(xc < 0) {
|
|
wc += xc;
|
|
xc = 0;
|
|
}
|
|
if(yc < 0) {
|
|
hc += yc;
|
|
yc = 0;
|
|
}
|
|
if(xc + wc > ww)
|
|
wc = ww - xc;
|
|
if(wc <= 0) /* Nothing to do */
|
|
return;
|
|
if(yc + hc > hw)
|
|
hc = hw - yc;
|
|
|
|
for (y = yc; y < yc+hc; y++) {
|
|
xtmp1=xc>>3;
|
|
xtmp2=(xc+wc)>>3;
|
|
base = pb->mask + y*96;
|
|
if(xc != 0 || wc >= 8)
|
|
*(base + xtmp1) &= (unsigned char)(0x00ff &
|
|
(0xff00 >> (xc&7)));
|
|
for (x = xtmp1 + 1; x < xtmp2; x++) {
|
|
*(base + x) = 0;
|
|
}
|
|
if(xc < (ww & ~0x7))
|
|
*(base + xtmp2) &= (unsigned char)(0x00ff >>
|
|
((xc+wc) & 7));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void fill_cmd_buff(struct planb *pb)
|
|
{
|
|
int restore = 0;
|
|
volatile struct dbdma_cmd last;
|
|
|
|
DEBUG("PlanB: fill_cmd_buff()\n");
|
|
|
|
if(pb->overlay_last1 != pb->ch1_cmd) {
|
|
restore = 1;
|
|
last = *(pb->overlay_last1);
|
|
}
|
|
memset ((void *) pb->ch1_cmd, 0, 2 * pb->tab_size
|
|
* sizeof(struct dbdma_cmd));
|
|
cmd_buff (pb);
|
|
if(restore)
|
|
*(pb->overlay_last1) = last;
|
|
if(pb->suspended.overlay) {
|
|
unsigned long jump_addr = in_le32(&pb->overlay_last1->cmd_dep);
|
|
if(jump_addr != pb->ch1_cmd_phys) {
|
|
int i;
|
|
|
|
DEBUG("PlanB: adjusting ch1's jump address\n");
|
|
|
|
for(i = 0; i < MAX_GBUFFERS; i++) {
|
|
if(pb->need_pre_capture[i]) {
|
|
if(jump_addr == virt_to_bus(pb->pre_cmd[i]))
|
|
goto found;
|
|
} else {
|
|
if(jump_addr == virt_to_bus(pb->cap_cmd[i]))
|
|
goto found;
|
|
}
|
|
}
|
|
|
|
DEBUG("PlanB: not found...\n");
|
|
|
|
goto out;
|
|
found:
|
|
if(pb->need_pre_capture[i])
|
|
out_le32(&pb->pre_cmd[i]->phy_addr,
|
|
virt_to_bus(pb->overlay_last1));
|
|
else
|
|
out_le32(&pb->cap_cmd[i]->phy_addr,
|
|
virt_to_bus(pb->overlay_last1));
|
|
}
|
|
}
|
|
out:
|
|
pb->cmd_buff_inited = 1;
|
|
|
|
return;
|
|
}
|
|
|
|
static void cmd_buff(struct planb *pb)
|
|
{
|
|
int i, bpp, count, nlines, stepsize, interlace;
|
|
unsigned long base, jump, addr_com, addr_dep;
|
|
volatile struct dbdma_cmd *c1 = pb->ch1_cmd;
|
|
volatile struct dbdma_cmd *c2 = pb->ch2_cmd;
|
|
|
|
interlace = pb->win.interlace;
|
|
bpp = pb->win.bpp;
|
|
count = (bpp * ((pb->win.x + pb->win.width > pb->win.swidth) ?
|
|
(pb->win.swidth - pb->win.x) : pb->win.width));
|
|
nlines = ((pb->win.y + pb->win.height > pb->win.sheight) ?
|
|
(pb->win.sheight - pb->win.y) : pb->win.height);
|
|
|
|
/* Do video in: */
|
|
|
|
/* Preamble commands: */
|
|
addr_com = virt_to_bus(c1);
|
|
addr_dep = virt_to_bus(&c1->cmd_dep);
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
|
|
jump = virt_to_bus(c1+16); /* 14 by cmd_geo_setup() and 2 for padding */
|
|
if((c1 = cmd_geo_setup(c1, pb->win.width, pb->win.height, interlace,
|
|
bpp, 1, pb)) == NULL) {
|
|
printk(KERN_WARNING "PlanB: encountered serious problems\n");
|
|
tab_cmd_dbdma(pb->ch1_cmd + 1, DBDMA_STOP, 0);
|
|
tab_cmd_dbdma(pb->ch2_cmd + 1, DBDMA_STOP, 0);
|
|
return;
|
|
}
|
|
tab_cmd_store(c1++, addr_com, (unsigned)(DBDMA_NOP | BR_ALWAYS) << 16);
|
|
tab_cmd_store(c1++, addr_dep, jump);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
|
|
PLANB_SET(FIELD_SYNC));
|
|
/* (1) wait for field sync to be set */
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(ODD_FIELD));
|
|
/* wait for field sync to be cleared */
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
|
|
/* if not odd field, wait until field sync is set again */
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
|
|
/* assert ch_sync to ch2 */
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control),
|
|
PLANB_SET(CH_SYNC));
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(DMA_ABORT));
|
|
|
|
base = (pb->frame_buffer_phys + pb->offset + pb->win.y * (pb->win.bpl
|
|
+ pb->win.pad) + pb->win.x * bpp);
|
|
|
|
if (interlace) {
|
|
stepsize = 2;
|
|
jump = virt_to_bus(c1 + (nlines + 1) / 2);
|
|
} else {
|
|
stepsize = 1;
|
|
jump = virt_to_bus(c1 + nlines);
|
|
}
|
|
|
|
/* even field data: */
|
|
for (i=0; i < nlines; i += stepsize, c1++)
|
|
tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET,
|
|
count, base + i * (pb->win.bpl + pb->win.pad), jump);
|
|
|
|
/* For non-interlaced, we use even fields only */
|
|
if (!interlace)
|
|
goto cmd_tab_data_end;
|
|
|
|
/* Resync to odd field */
|
|
/* (2) wait for field sync to be set */
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(ODD_FIELD));
|
|
/* wait for field sync to be cleared */
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
|
|
/* if not odd field, wait until field sync is set again */
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
|
|
/* assert ch_sync to ch2 */
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control),
|
|
PLANB_SET(CH_SYNC));
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(DMA_ABORT));
|
|
|
|
/* odd field data: */
|
|
jump = virt_to_bus(c1 + nlines / 2);
|
|
for (i=1; i < nlines; i += stepsize, c1++)
|
|
tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
|
|
base + i * (pb->win.bpl + pb->win.pad), jump);
|
|
|
|
/* And jump back to the start */
|
|
cmd_tab_data_end:
|
|
pb->overlay_last1 = c1; /* keep a pointer to the last command */
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch1_cmd));
|
|
|
|
/* Clipmask command buffer */
|
|
|
|
/* Preamble commands: */
|
|
tab_cmd_dbdma(c2++, DBDMA_NOP, 0);
|
|
tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel),
|
|
PLANB_SET(CH_SYNC));
|
|
/* wait until ch1 asserts ch_sync */
|
|
tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0);
|
|
/* clear ch_sync asserted by ch1 */
|
|
tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.control),
|
|
PLANB_CLR(CH_SYNC));
|
|
tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel),
|
|
PLANB_SET(FIELD_SYNC));
|
|
tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
|
|
PLANB_SET(ODD_FIELD));
|
|
|
|
/* jump to end of even field if appropriate */
|
|
/* this points to (interlace)? pos. C: pos. B */
|
|
jump = (interlace) ? virt_to_bus(c2 + (nlines + 1) / 2 + 2):
|
|
virt_to_bus(c2 + nlines + 2);
|
|
/* if odd field, skip over to odd field clipmasking */
|
|
tab_cmd_dbdma(c2++, DBDMA_NOP | BR_IFSET, jump);
|
|
|
|
/* even field mask: */
|
|
tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
|
|
PLANB_SET(DMA_ABORT));
|
|
/* this points to pos. B */
|
|
jump = (interlace) ? virt_to_bus(c2 + nlines + 1):
|
|
virt_to_bus(c2 + nlines);
|
|
base = virt_to_bus(pb->mask);
|
|
for (i=0; i < nlines; i += stepsize, c2++)
|
|
tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96,
|
|
base + i * 96, jump);
|
|
|
|
/* For non-interlaced, we use only even fields */
|
|
if(!interlace)
|
|
goto cmd_tab_mask_end;
|
|
|
|
/* odd field mask: */
|
|
/* C */ tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel),
|
|
PLANB_SET(DMA_ABORT));
|
|
/* this points to pos. B */
|
|
jump = virt_to_bus(c2 + nlines / 2);
|
|
base = virt_to_bus(pb->mask);
|
|
for (i=1; i < nlines; i += 2, c2++) /* abort if set */
|
|
tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96,
|
|
base + i * 96, jump);
|
|
|
|
/* Inform channel 1 and jump back to start */
|
|
cmd_tab_mask_end:
|
|
/* ok, I just realized this is kind of flawed. */
|
|
/* this part is reached only after odd field clipmasking. */
|
|
/* wanna clean up? */
|
|
/* wait for field sync to be set */
|
|
/* corresponds to fsync (1) of ch1 */
|
|
/* B */ tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0);
|
|
/* restart ch1, meant to clear any dead bit or something */
|
|
tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control),
|
|
PLANB_CLR(RUN));
|
|
tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control),
|
|
PLANB_SET(RUN));
|
|
pb->overlay_last2 = c2; /* keep a pointer to the last command */
|
|
/* start over even field clipmasking */
|
|
tab_cmd_dbdma(c2, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch2_cmd));
|
|
|
|
eieio();
|
|
return;
|
|
}
|
|
|
|
/*********************************/
|
|
/* grabdisplay support functions */
|
|
/*********************************/
|
|
|
|
static int palette2fmt[] = {
|
|
0,
|
|
PLANB_GRAY,
|
|
0,
|
|
0,
|
|
0,
|
|
PLANB_COLOUR32,
|
|
PLANB_COLOUR15,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
};
|
|
|
|
#define PLANB_PALETTE_MAX 15
|
|
|
|
static int vgrab(struct planb *pb, struct video_mmap *mp)
|
|
{
|
|
unsigned int fr = mp->frame;
|
|
unsigned int format;
|
|
|
|
if(pb->rawbuf==NULL) {
|
|
int err;
|
|
if((err=grabbuf_alloc(pb)))
|
|
return err;
|
|
}
|
|
|
|
IDEBUG("PlanB: grab %d: %dx%d(%u)\n", pb->grabbing,
|
|
mp->width, mp->height, fr);
|
|
|
|
if(pb->grabbing >= MAX_GBUFFERS)
|
|
return -ENOBUFS;
|
|
if(fr > (MAX_GBUFFERS - 1) || fr < 0)
|
|
return -EINVAL;
|
|
if(mp->height <= 0 || mp->width <= 0)
|
|
return -EINVAL;
|
|
if(mp->format < 0 || mp->format >= PLANB_PALETTE_MAX)
|
|
return -EINVAL;
|
|
if((format = palette2fmt[mp->format]) == 0)
|
|
return -EINVAL;
|
|
if (mp->height * mp->width * format > PLANB_MAX_FBUF) /* format = bpp */
|
|
return -EINVAL;
|
|
|
|
planb_lock(pb);
|
|
if(mp->width != pb->gwidth[fr] || mp->height != pb->gheight[fr] ||
|
|
format != pb->gfmt[fr] || (pb->gnorm_switch[fr])) {
|
|
int i;
|
|
#ifndef PLANB_GSCANLINE
|
|
unsigned int osize = pb->gwidth[fr] * pb->gheight[fr]
|
|
* pb->gfmt[fr];
|
|
unsigned int nsize = mp->width * mp->height * format;
|
|
#endif
|
|
|
|
IDEBUG("PlanB: gwidth = %d, gheight = %d, mp->format = %u\n",
|
|
mp->width, mp->height, mp->format);
|
|
|
|
#ifndef PLANB_GSCANLINE
|
|
if(pb->gnorm_switch[fr])
|
|
nsize = 0;
|
|
if (nsize < osize) {
|
|
for(i = pb->gbuf_idx[fr]; osize > 0; i++) {
|
|
memset((void *)pb->rawbuf[i], 0, PAGE_SIZE);
|
|
osize -= PAGE_SIZE;
|
|
}
|
|
}
|
|
for(i = pb->l_fr_addr_idx[fr]; i < pb->l_fr_addr_idx[fr]
|
|
+ pb->lnum[fr]; i++)
|
|
memset((void *)pb->rawbuf[i], 0, PAGE_SIZE);
|
|
#else
|
|
/* XXX TODO */
|
|
/*
|
|
if(pb->gnorm_switch[fr])
|
|
memset((void *)pb->gbuffer[fr], 0,
|
|
pb->gbytes_per_line * pb->gheight[fr]);
|
|
else {
|
|
if(mp->
|
|
for(i = 0; i < pb->gheight[fr]; i++) {
|
|
memset((void *)(pb->gbuffer[fr]
|
|
+ pb->gbytes_per_line * i
|
|
}
|
|
}
|
|
*/
|
|
#endif
|
|
pb->gwidth[fr] = mp->width;
|
|
pb->gheight[fr] = mp->height;
|
|
pb->gfmt[fr] = format;
|
|
pb->last_cmd[fr] = setup_grab_cmd(fr, pb);
|
|
planb_pre_capture(fr, pb->gfmt[fr], pb); /* gfmt = bpp */
|
|
pb->need_pre_capture[fr] = 1;
|
|
pb->gnorm_switch[fr] = 0;
|
|
} else
|
|
pb->need_pre_capture[fr] = 0;
|
|
pb->frame_stat[fr] = GBUFFER_GRABBING;
|
|
if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
|
|
|
|
IDEBUG("PlanB: ch1 inactive, initiating grabbing\n");
|
|
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
if(pb->need_pre_capture[fr]) {
|
|
|
|
IDEBUG("PlanB: padding pre-capture sequence\n");
|
|
|
|
out_le32 (&pb->planb_base->ch1.cmdptr,
|
|
virt_to_bus(pb->pre_cmd[fr]));
|
|
} else {
|
|
tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
|
|
tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
|
|
/* let's be on the safe side. here is not timing critical. */
|
|
tab_cmd_dbdma((pb->cap_cmd[fr] + 1), DBDMA_NOP, 0);
|
|
out_le32 (&pb->planb_base->ch1.cmdptr,
|
|
virt_to_bus(pb->cap_cmd[fr]));
|
|
}
|
|
planb_dbdma_restart(&pb->planb_base->ch1);
|
|
pb->last_fr = fr;
|
|
} else {
|
|
int i;
|
|
|
|
IDEBUG("PlanB: ch1 active, grabbing being queued\n");
|
|
|
|
if((pb->last_fr == -1) || ((pb->last_fr == -2) &&
|
|
overlay_is_active(pb))) {
|
|
|
|
IDEBUG("PlanB: overlay is active, grabbing defered\n");
|
|
|
|
tab_cmd_dbdma(pb->last_cmd[fr],
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->ch1_cmd));
|
|
if(pb->need_pre_capture[fr]) {
|
|
|
|
IDEBUG("PlanB: padding pre-capture sequence\n");
|
|
|
|
tab_cmd_store(pb->pre_cmd[fr],
|
|
virt_to_bus(&pb->overlay_last1->cmd_dep),
|
|
virt_to_bus(pb->ch1_cmd));
|
|
eieio();
|
|
out_le32 (&pb->overlay_last1->cmd_dep,
|
|
virt_to_bus(pb->pre_cmd[fr]));
|
|
} else {
|
|
tab_cmd_store(pb->cap_cmd[fr],
|
|
virt_to_bus(&pb->overlay_last1->cmd_dep),
|
|
virt_to_bus(pb->ch1_cmd));
|
|
tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
|
|
DBDMA_NOP, 0);
|
|
eieio();
|
|
out_le32 (&pb->overlay_last1->cmd_dep,
|
|
virt_to_bus(pb->cap_cmd[fr]));
|
|
}
|
|
for(i = 0; overlay_is_active(pb) && i < 999; i++)
|
|
IDEBUG("PlanB: waiting for overlay done\n");
|
|
tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0);
|
|
pb->prev_last_fr = fr;
|
|
pb->last_fr = -2;
|
|
} else if(pb->last_fr == -2) {
|
|
|
|
IDEBUG("PlanB: mixed mode detected, grabbing"
|
|
" will be done before activating overlay\n");
|
|
|
|
tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0);
|
|
if(pb->need_pre_capture[fr]) {
|
|
|
|
IDEBUG("PlanB: padding pre-capture sequence\n");
|
|
|
|
tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr],
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->pre_cmd[fr]));
|
|
eieio();
|
|
} else {
|
|
tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
|
|
if(pb->gwidth[pb->prev_last_fr] !=
|
|
pb->gwidth[fr]
|
|
|| pb->gheight[pb->prev_last_fr] !=
|
|
pb->gheight[fr]
|
|
|| pb->gfmt[pb->prev_last_fr] !=
|
|
pb->gfmt[fr])
|
|
tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
|
|
DBDMA_NOP, 0);
|
|
else
|
|
tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->cap_cmd[fr] + 16));
|
|
tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr],
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->cap_cmd[fr]));
|
|
eieio();
|
|
}
|
|
tab_cmd_dbdma(pb->last_cmd[fr],
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->ch1_cmd));
|
|
eieio();
|
|
pb->prev_last_fr = fr;
|
|
pb->last_fr = -2;
|
|
} else {
|
|
|
|
IDEBUG("PlanB: active grabbing session detected\n");
|
|
|
|
if(pb->need_pre_capture[fr]) {
|
|
|
|
IDEBUG("PlanB: padding pre-capture sequence\n");
|
|
|
|
tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->pre_cmd[fr]));
|
|
eieio();
|
|
} else {
|
|
tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0);
|
|
tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0);
|
|
if(pb->gwidth[pb->last_fr] != pb->gwidth[fr]
|
|
|| pb->gheight[pb->last_fr] !=
|
|
pb->gheight[fr]
|
|
|| pb->gfmt[pb->last_fr] !=
|
|
pb->gfmt[fr])
|
|
tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
|
|
DBDMA_NOP, 0);
|
|
else
|
|
tab_cmd_dbdma((pb->cap_cmd[fr] + 1),
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->cap_cmd[fr] + 16));
|
|
tab_cmd_dbdma(pb->last_cmd[pb->last_fr],
|
|
DBDMA_NOP | BR_ALWAYS,
|
|
virt_to_bus(pb->cap_cmd[fr]));
|
|
eieio();
|
|
}
|
|
pb->last_fr = fr;
|
|
}
|
|
if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) {
|
|
|
|
IDEBUG("PlanB: became inactive in the mean time..."
|
|
"reactivating\n");
|
|
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
out_le32 (&pb->planb_base->ch1.cmdptr,
|
|
virt_to_bus(pb->cap_cmd[fr]));
|
|
planb_dbdma_restart(&pb->planb_base->ch1);
|
|
}
|
|
}
|
|
pb->grabbing++;
|
|
planb_unlock(pb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void planb_pre_capture(int fr, int bpp, struct planb *pb)
|
|
{
|
|
volatile struct dbdma_cmd *c1 = pb->pre_cmd[fr];
|
|
int interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0;
|
|
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
|
|
if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace,
|
|
bpp, 0, pb)) == NULL) {
|
|
printk(KERN_WARNING "PlanB: encountered some problems\n");
|
|
tab_cmd_dbdma(pb->pre_cmd[fr] + 1, DBDMA_STOP, 0);
|
|
return;
|
|
}
|
|
/* Sync to even field */
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
|
|
PLANB_SET(FIELD_SYNC));
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(ODD_FIELD));
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(DMA_ABORT));
|
|
/* For non-interlaced, we use even fields only */
|
|
if (pb->gheight[fr] <= pb->maxlines/2)
|
|
goto cmd_tab_data_end;
|
|
/* Sync to odd field */
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(ODD_FIELD));
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(DMA_ABORT));
|
|
cmd_tab_data_end:
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->cap_cmd[fr]));
|
|
|
|
eieio();
|
|
}
|
|
|
|
static volatile struct dbdma_cmd *setup_grab_cmd(int fr, struct planb *pb)
|
|
{
|
|
int i, bpp, count, nlines, stepsize, interlace;
|
|
#ifdef PLANB_GSCANLINE
|
|
int scanline;
|
|
#else
|
|
int nlpp, leftover1;
|
|
unsigned long base;
|
|
#endif
|
|
unsigned long jump;
|
|
int pagei;
|
|
volatile struct dbdma_cmd *c1;
|
|
volatile struct dbdma_cmd *jump_addr;
|
|
|
|
c1 = pb->cap_cmd[fr];
|
|
interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0;
|
|
bpp = pb->gfmt[fr]; /* gfmt = bpp */
|
|
count = bpp * pb->gwidth[fr];
|
|
nlines = pb->gheight[fr];
|
|
#ifdef PLANB_GSCANLINE
|
|
scanline = pb->gbytes_per_line;
|
|
#else
|
|
pb->lsize[fr] = count;
|
|
pb->lnum[fr] = 0;
|
|
#endif
|
|
|
|
/* Do video in: */
|
|
|
|
/* Preamble commands: */
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP, 0);
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(c1 + 16)); c1++;
|
|
if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace,
|
|
bpp, 0, pb)) == NULL) {
|
|
printk(KERN_WARNING "PlanB: encountered serious problems\n");
|
|
tab_cmd_dbdma(pb->cap_cmd[fr] + 1, DBDMA_STOP, 0);
|
|
return (pb->cap_cmd[fr] + 2);
|
|
}
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel),
|
|
PLANB_SET(FIELD_SYNC));
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(ODD_FIELD));
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++;
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(DMA_ABORT));
|
|
|
|
if (interlace) {
|
|
stepsize = 2;
|
|
jump_addr = c1 + TAB_FACTOR * (nlines + 1) / 2;
|
|
} else {
|
|
stepsize = 1;
|
|
jump_addr = c1 + TAB_FACTOR * nlines;
|
|
}
|
|
jump = virt_to_bus(jump_addr);
|
|
|
|
/* even field data: */
|
|
|
|
pagei = pb->gbuf_idx[fr];
|
|
#ifdef PLANB_GSCANLINE
|
|
for (i = 0; i < nlines; i += stepsize) {
|
|
tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
|
|
virt_to_bus(pb->rawbuf[pagei
|
|
+ i * scanline / PAGE_SIZE]), jump);
|
|
}
|
|
#else
|
|
i = 0;
|
|
leftover1 = 0;
|
|
do {
|
|
int j;
|
|
|
|
base = virt_to_bus(pb->rawbuf[pagei]);
|
|
nlpp = (PAGE_SIZE - leftover1) / count / stepsize;
|
|
for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++)
|
|
tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET,
|
|
count, base + count * j * stepsize + leftover1, jump);
|
|
if(i < nlines) {
|
|
int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1;
|
|
|
|
if(lov0 == 0)
|
|
leftover1 = 0;
|
|
else {
|
|
if(lov0 >= count) {
|
|
tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, base
|
|
+ count * nlpp * stepsize + leftover1, jump);
|
|
} else {
|
|
pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei]
|
|
+ count * nlpp * stepsize + leftover1;
|
|
pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1;
|
|
pb->l_to_next_size[fr][pb->lnum[fr]] = count - lov0;
|
|
tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
|
|
virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr]
|
|
+ pb->lnum[fr]]), jump);
|
|
if(++pb->lnum[fr] > MAX_LNUM)
|
|
pb->lnum[fr]--;
|
|
}
|
|
leftover1 = count * stepsize - lov0;
|
|
i += stepsize;
|
|
}
|
|
}
|
|
pagei++;
|
|
} while(i < nlines);
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump);
|
|
c1 = jump_addr;
|
|
#endif /* PLANB_GSCANLINE */
|
|
|
|
/* For non-interlaced, we use even fields only */
|
|
if (!interlace)
|
|
goto cmd_tab_data_end;
|
|
|
|
/* Sync to odd field */
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0);
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(ODD_FIELD));
|
|
tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0);
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
|
|
PLANB_SET(DMA_ABORT));
|
|
|
|
/* odd field data: */
|
|
jump_addr = c1 + TAB_FACTOR * nlines / 2;
|
|
jump = virt_to_bus(jump_addr);
|
|
#ifdef PLANB_GSCANLINE
|
|
for (i = 1; i < nlines; i += stepsize) {
|
|
tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
|
|
virt_to_bus(pb->rawbuf[pagei
|
|
+ i * scanline / PAGE_SIZE]), jump);
|
|
}
|
|
#else
|
|
i = 1;
|
|
leftover1 = 0;
|
|
pagei = pb->gbuf_idx[fr];
|
|
if(nlines <= 1)
|
|
goto skip;
|
|
do {
|
|
int j;
|
|
|
|
base = virt_to_bus(pb->rawbuf[pagei]);
|
|
nlpp = (PAGE_SIZE - leftover1) / count / stepsize;
|
|
if(leftover1 >= count) {
|
|
tab_cmd_gen(c1++, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
|
|
base + leftover1 - count, jump);
|
|
i += stepsize;
|
|
}
|
|
for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++)
|
|
tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count,
|
|
base + count * (j * stepsize + 1) + leftover1, jump);
|
|
if(i < nlines) {
|
|
int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1;
|
|
|
|
if(lov0 == 0)
|
|
leftover1 = 0;
|
|
else {
|
|
if(lov0 > count) {
|
|
pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei]
|
|
+ count * (nlpp * stepsize + 1) + leftover1;
|
|
pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1;
|
|
pb->l_to_next_size[fr][pb->lnum[fr]] = count * stepsize
|
|
- lov0;
|
|
tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count,
|
|
virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr]
|
|
+ pb->lnum[fr]]), jump);
|
|
if(++pb->lnum[fr] > MAX_LNUM)
|
|
pb->lnum[fr]--;
|
|
i += stepsize;
|
|
}
|
|
leftover1 = count * stepsize - lov0;
|
|
}
|
|
}
|
|
pagei++;
|
|
} while(i < nlines);
|
|
skip:
|
|
tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump);
|
|
c1 = jump_addr;
|
|
#endif /* PLANB_GSCANLINE */
|
|
|
|
cmd_tab_data_end:
|
|
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->intr_stat),
|
|
(fr << 9) | PLANB_FRM_IRQ | PLANB_GEN_IRQ);
|
|
/* stop it */
|
|
tab_cmd_dbdma(c1, DBDMA_STOP, 0);
|
|
|
|
eieio();
|
|
return c1;
|
|
}
|
|
|
|
static void planb_irq(int irq, void *dev_id, struct pt_regs * regs)
|
|
{
|
|
unsigned int stat, astat;
|
|
struct planb *pb = (struct planb *)dev_id;
|
|
|
|
IDEBUG("PlanB: planb_irq()\n");
|
|
|
|
/* get/clear interrupt status bits */
|
|
eieio();
|
|
stat = in_le32(&pb->planb_base->intr_stat);
|
|
astat = stat & pb->intr_mask;
|
|
out_le32(&pb->planb_base->intr_stat, PLANB_FRM_IRQ
|
|
& ~astat & stat & ~PLANB_GEN_IRQ);
|
|
IDEBUG("PlanB: stat = %X, astat = %X\n", stat, astat);
|
|
|
|
if(astat & PLANB_FRM_IRQ) {
|
|
unsigned int fr = stat >> 9;
|
|
#ifndef PLANB_GSCANLINE
|
|
int i;
|
|
#endif
|
|
IDEBUG("PlanB: PLANB_FRM_IRQ\n");
|
|
|
|
pb->gcount++;
|
|
|
|
IDEBUG("PlanB: grab %d: fr = %d, gcount = %d\n",
|
|
pb->grabbing, fr, pb->gcount);
|
|
#ifndef PLANB_GSCANLINE
|
|
IDEBUG("PlanB: %d * %d bytes are being copied over\n",
|
|
pb->lnum[fr], pb->lsize[fr]);
|
|
for(i = 0; i < pb->lnum[fr]; i++) {
|
|
int first = pb->lsize[fr] - pb->l_to_next_size[fr][i];
|
|
|
|
memcpy(pb->l_to_addr[fr][i],
|
|
pb->rawbuf[pb->l_fr_addr_idx[fr] + i],
|
|
first);
|
|
memcpy(pb->rawbuf[pb->l_to_next_idx[fr][i]],
|
|
pb->rawbuf[pb->l_fr_addr_idx[fr] + i] + first,
|
|
pb->l_to_next_size[fr][i]);
|
|
}
|
|
#endif
|
|
pb->frame_stat[fr] = GBUFFER_DONE;
|
|
pb->grabbing--;
|
|
wake_up_interruptible(&pb->capq);
|
|
return;
|
|
}
|
|
/* incorrect interrupts? */
|
|
pb->intr_mask = PLANB_CLR_IRQ;
|
|
out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
|
|
printk(KERN_ERR "PlanB: IRQ lockup, cleared intrrupts"
|
|
" unconditionally\n");
|
|
}
|
|
|
|
/*******************************
|
|
* Device Operations functions *
|
|
*******************************/
|
|
|
|
static int planb_open(struct video_device *dev, int mode)
|
|
{
|
|
struct planb *pb = (struct planb *)dev;
|
|
|
|
if (pb->user == 0) {
|
|
int err;
|
|
if((err = planb_prepare_open(pb)) != 0)
|
|
return err;
|
|
}
|
|
pb->user++;
|
|
|
|
DEBUG("PlanB: device opened\n");
|
|
return 0;
|
|
}
|
|
|
|
static void planb_close(struct video_device *dev)
|
|
{
|
|
struct planb *pb = (struct planb *)dev;
|
|
|
|
if(pb->user < 1) /* ??? */
|
|
return;
|
|
planb_lock(pb);
|
|
if (pb->user == 1) {
|
|
if (pb->overlay) {
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
pb->overlay = 0;
|
|
}
|
|
planb_prepare_close(pb);
|
|
}
|
|
pb->user--;
|
|
planb_unlock(pb);
|
|
|
|
DEBUG("PlanB: device closed\n");
|
|
}
|
|
|
|
static long planb_read(struct video_device *v, char *buf, unsigned long count,
|
|
int nonblock)
|
|
{
|
|
DEBUG("planb: read request\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static long planb_write(struct video_device *v, const char *buf,
|
|
unsigned long count, int nonblock)
|
|
{
|
|
DEBUG("planb: write request\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
|
|
{
|
|
struct planb *pb=(struct planb *)dev;
|
|
|
|
switch (cmd)
|
|
{
|
|
case VIDIOCGCAP:
|
|
{
|
|
struct video_capability b;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCGCAP\n");
|
|
|
|
strcpy (b.name, pb->video_dev.name);
|
|
b.type = VID_TYPE_OVERLAY | VID_TYPE_CLIPPING |
|
|
VID_TYPE_FRAMERAM | VID_TYPE_SCALES |
|
|
VID_TYPE_CAPTURE;
|
|
b.channels = 2; /* composite & svhs */
|
|
b.audios = 0;
|
|
b.maxwidth = PLANB_MAXPIXELS;
|
|
b.maxheight = PLANB_MAXLINES;
|
|
b.minwidth = 32; /* wild guess */
|
|
b.minheight = 32;
|
|
if (copy_to_user(arg,&b,sizeof(b)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCSFBUF:
|
|
{
|
|
struct video_buffer v;
|
|
unsigned short bpp;
|
|
unsigned int fmt;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCSFBUF\n");
|
|
|
|
if (!capable(CAP_SYS_ADMIN)
|
|
|| !capable(CAP_SYS_RAWIO))
|
|
return -EPERM;
|
|
if (copy_from_user(&v, arg,sizeof(v)))
|
|
return -EFAULT;
|
|
planb_lock(pb);
|
|
switch(v.depth) {
|
|
case 8:
|
|
bpp = 1;
|
|
fmt = PLANB_GRAY;
|
|
break;
|
|
case 15:
|
|
case 16:
|
|
bpp = 2;
|
|
fmt = PLANB_COLOUR15;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
bpp = 4;
|
|
fmt = PLANB_COLOUR32;
|
|
break;
|
|
default:
|
|
planb_unlock(pb);
|
|
return -EINVAL;
|
|
}
|
|
if (bpp * v.width > v.bytesperline) {
|
|
planb_unlock(pb);
|
|
return -EINVAL;
|
|
}
|
|
pb->win.bpp = bpp;
|
|
pb->win.color_fmt = fmt;
|
|
pb->frame_buffer_phys = (unsigned long) v.base;
|
|
pb->win.sheight = v.height;
|
|
pb->win.swidth = v.width;
|
|
pb->picture.depth = pb->win.depth = v.depth;
|
|
pb->win.bpl = pb->win.bpp * pb->win.swidth;
|
|
pb->win.pad = v.bytesperline - pb->win.bpl;
|
|
|
|
DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d,"
|
|
" bpl %d (+ %d)\n", v.base, v.width,v.height,
|
|
pb->win.bpp, pb->win.bpl, pb->win.pad);
|
|
|
|
pb->cmd_buff_inited = 0;
|
|
if(pb->overlay) {
|
|
suspend_overlay(pb);
|
|
fill_cmd_buff(pb);
|
|
resume_overlay(pb);
|
|
}
|
|
planb_unlock(pb);
|
|
return 0;
|
|
}
|
|
case VIDIOCGFBUF:
|
|
{
|
|
struct video_buffer v;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCGFBUF\n");
|
|
|
|
v.base = (void *)pb->frame_buffer_phys;
|
|
v.height = pb->win.sheight;
|
|
v.width = pb->win.swidth;
|
|
v.depth = pb->win.depth;
|
|
v.bytesperline = pb->win.bpl + pb->win.pad;
|
|
if (copy_to_user(arg, &v, sizeof(v)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCCAPTURE:
|
|
{
|
|
int i;
|
|
|
|
if(copy_from_user(&i, arg, sizeof(i)))
|
|
return -EFAULT;
|
|
if(i==0) {
|
|
DEBUG("PlanB: IOCTL VIDIOCCAPTURE Stop\n");
|
|
|
|
if (!(pb->overlay))
|
|
return 0;
|
|
planb_lock(pb);
|
|
pb->overlay = 0;
|
|
overlay_stop(pb);
|
|
planb_unlock(pb);
|
|
} else {
|
|
DEBUG("PlanB: IOCTL VIDIOCCAPTURE Start\n");
|
|
|
|
if (pb->frame_buffer_phys == 0 ||
|
|
pb->win.width == 0 ||
|
|
pb->win.height == 0)
|
|
return -EINVAL;
|
|
if (pb->overlay)
|
|
return 0;
|
|
planb_lock(pb);
|
|
pb->overlay = 1;
|
|
if(!(pb->cmd_buff_inited))
|
|
fill_cmd_buff(pb);
|
|
overlay_start(pb);
|
|
planb_unlock(pb);
|
|
}
|
|
return 0;
|
|
}
|
|
case VIDIOCGCHAN:
|
|
{
|
|
struct video_channel v;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCGCHAN\n");
|
|
|
|
if(copy_from_user(&v, arg,sizeof(v)))
|
|
return -EFAULT;
|
|
v.flags = 0;
|
|
v.tuners = 0;
|
|
v.type = VIDEO_TYPE_CAMERA;
|
|
v.norm = pb->win.norm;
|
|
switch(v.channel)
|
|
{
|
|
case 0:
|
|
strcpy(v.name,"Composite");
|
|
break;
|
|
case 1:
|
|
strcpy(v.name,"SVHS");
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
if(copy_to_user(arg,&v,sizeof(v)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
case VIDIOCSCHAN:
|
|
{
|
|
struct video_channel v;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCSCHAN\n");
|
|
|
|
if(copy_from_user(&v, arg, sizeof(v)))
|
|
return -EFAULT;
|
|
|
|
if (v.norm != pb->win.norm) {
|
|
int i, maxlines;
|
|
|
|
switch (v.norm)
|
|
{
|
|
case VIDEO_MODE_PAL:
|
|
case VIDEO_MODE_SECAM:
|
|
maxlines = PLANB_MAXLINES;
|
|
break;
|
|
case VIDEO_MODE_NTSC:
|
|
maxlines = PLANB_NTSC_MAXLINES;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
planb_lock(pb);
|
|
/* empty the grabbing queue */
|
|
wait_event(pb->capq, !pb->grabbing);
|
|
pb->maxlines = maxlines;
|
|
pb->win.norm = v.norm;
|
|
/* Stop overlay if running */
|
|
suspend_overlay(pb);
|
|
for(i = 0; i < MAX_GBUFFERS; i++)
|
|
pb->gnorm_switch[i] = 1;
|
|
/* I know it's an overkill, but.... */
|
|
fill_cmd_buff(pb);
|
|
/* ok, now init it accordingly */
|
|
saa_init_regs (pb);
|
|
/* restart overlay if it was running */
|
|
resume_overlay(pb);
|
|
planb_unlock(pb);
|
|
}
|
|
|
|
switch(v.channel)
|
|
{
|
|
case 0: /* Composite */
|
|
saa_set (SAA7196_IOCC,
|
|
((saa_regs[pb->win.norm][SAA7196_IOCC] &
|
|
~7) | 3), pb);
|
|
break;
|
|
case 1: /* SVHS */
|
|
saa_set (SAA7196_IOCC,
|
|
((saa_regs[pb->win.norm][SAA7196_IOCC] &
|
|
~7) | 4), pb);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
case VIDIOCGPICT:
|
|
{
|
|
struct video_picture vp = pb->picture;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCGPICT\n");
|
|
|
|
switch(pb->win.color_fmt) {
|
|
case PLANB_GRAY:
|
|
vp.palette = VIDEO_PALETTE_GREY;
|
|
case PLANB_COLOUR15:
|
|
vp.palette = VIDEO_PALETTE_RGB555;
|
|
break;
|
|
case PLANB_COLOUR32:
|
|
vp.palette = VIDEO_PALETTE_RGB32;
|
|
break;
|
|
default:
|
|
vp.palette = 0;
|
|
break;
|
|
}
|
|
|
|
if(copy_to_user(arg,&vp,sizeof(vp)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCSPICT:
|
|
{
|
|
struct video_picture vp;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCSPICT\n");
|
|
|
|
if(copy_from_user(&vp,arg,sizeof(vp)))
|
|
return -EFAULT;
|
|
pb->picture = vp;
|
|
/* Should we do sanity checks here? */
|
|
saa_set (SAA7196_BRIG, (unsigned char)
|
|
((pb->picture.brightness) >> 8), pb);
|
|
saa_set (SAA7196_HUEC, (unsigned char)
|
|
((pb->picture.hue) >> 8) ^ 0x80, pb);
|
|
saa_set (SAA7196_CSAT, (unsigned char)
|
|
((pb->picture.colour) >> 9), pb);
|
|
saa_set (SAA7196_CONT, (unsigned char)
|
|
((pb->picture.contrast) >> 9), pb);
|
|
|
|
return 0;
|
|
}
|
|
case VIDIOCSWIN:
|
|
{
|
|
struct video_window vw;
|
|
struct video_clip clip;
|
|
int i;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCSWIN\n");
|
|
|
|
if(copy_from_user(&vw,arg,sizeof(vw)))
|
|
return -EFAULT;
|
|
|
|
planb_lock(pb);
|
|
/* Stop overlay if running */
|
|
suspend_overlay(pb);
|
|
pb->win.interlace = (vw.height > pb->maxlines/2)? 1: 0;
|
|
if (pb->win.x != vw.x ||
|
|
pb->win.y != vw.y ||
|
|
pb->win.width != vw.width ||
|
|
pb->win.height != vw.height ||
|
|
!pb->cmd_buff_inited) {
|
|
pb->win.x = vw.x;
|
|
pb->win.y = vw.y;
|
|
pb->win.width = vw.width;
|
|
pb->win.height = vw.height;
|
|
fill_cmd_buff(pb);
|
|
}
|
|
/* Reset clip mask */
|
|
memset ((void *) pb->mask, 0xff, (pb->maxlines
|
|
* ((PLANB_MAXPIXELS + 7) & ~7)) / 8);
|
|
/* Add any clip rects */
|
|
for (i = 0; i < vw.clipcount; i++) {
|
|
if (copy_from_user(&clip, vw.clips + i,
|
|
sizeof(struct video_clip)))
|
|
return -EFAULT;
|
|
add_clip(pb, &clip);
|
|
}
|
|
/* restart overlay if it was running */
|
|
resume_overlay(pb);
|
|
planb_unlock(pb);
|
|
return 0;
|
|
}
|
|
case VIDIOCGWIN:
|
|
{
|
|
struct video_window vw;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCGWIN\n");
|
|
|
|
vw.x=pb->win.x;
|
|
vw.y=pb->win.y;
|
|
vw.width=pb->win.width;
|
|
vw.height=pb->win.height;
|
|
vw.chromakey=0;
|
|
vw.flags=0;
|
|
if(pb->win.interlace)
|
|
vw.flags|=VIDEO_WINDOW_INTERLACE;
|
|
if(copy_to_user(arg,&vw,sizeof(vw)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
case VIDIOCSYNC: {
|
|
int i;
|
|
|
|
IDEBUG("PlanB: IOCTL VIDIOCSYNC\n");
|
|
|
|
if(copy_from_user((void *)&i,arg,sizeof(int)))
|
|
return -EFAULT;
|
|
|
|
IDEBUG("PlanB: sync to frame %d\n", i);
|
|
|
|
if(i > (MAX_GBUFFERS - 1) || i < 0)
|
|
return -EINVAL;
|
|
chk_grab:
|
|
switch (pb->frame_stat[i]) {
|
|
case GBUFFER_UNUSED:
|
|
return -EINVAL;
|
|
case GBUFFER_GRABBING:
|
|
IDEBUG("PlanB: waiting for grab"
|
|
" done (%d)\n", i);
|
|
interruptible_sleep_on(&pb->capq);
|
|
if(signal_pending(current))
|
|
return -EINTR;
|
|
goto chk_grab;
|
|
case GBUFFER_DONE:
|
|
pb->frame_stat[i] = GBUFFER_UNUSED;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
case VIDIOCMCAPTURE:
|
|
{
|
|
struct video_mmap vm;
|
|
volatile unsigned int status;
|
|
|
|
IDEBUG("PlanB: IOCTL VIDIOCMCAPTURE\n");
|
|
|
|
if(copy_from_user((void *) &vm,(void *)arg,sizeof(vm)))
|
|
return -EFAULT;
|
|
status = pb->frame_stat[vm.frame];
|
|
if (status != GBUFFER_UNUSED)
|
|
return -EBUSY;
|
|
|
|
return vgrab(pb, &vm);
|
|
}
|
|
|
|
case VIDIOCGMBUF:
|
|
{
|
|
int i;
|
|
struct video_mbuf vm;
|
|
|
|
DEBUG("PlanB: IOCTL VIDIOCGMBUF\n");
|
|
|
|
memset(&vm, 0 , sizeof(vm));
|
|
vm.size = PLANB_MAX_FBUF * MAX_GBUFFERS;
|
|
vm.frames = MAX_GBUFFERS;
|
|
for(i = 0; i<MAX_GBUFFERS; i++)
|
|
vm.offsets[i] = PLANB_MAX_FBUF * i;
|
|
if(copy_to_user((void *)arg, (void *)&vm, sizeof(vm)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
case PLANBIOCGSAAREGS:
|
|
{
|
|
struct planb_saa_regs preg;
|
|
|
|
DEBUG("PlanB: IOCTL PLANBIOCGSAAREGS\n");
|
|
|
|
if(copy_from_user(&preg, arg, sizeof(preg)))
|
|
return -EFAULT;
|
|
if(preg.addr >= SAA7196_NUMREGS)
|
|
return -EINVAL;
|
|
preg.val = saa_regs[pb->win.norm][preg.addr];
|
|
if(copy_to_user((void *)arg, (void *)&preg,
|
|
sizeof(preg)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
case PLANBIOCSSAAREGS:
|
|
{
|
|
struct planb_saa_regs preg;
|
|
|
|
DEBUG("PlanB: IOCTL PLANBIOCSSAAREGS\n");
|
|
|
|
if(copy_from_user(&preg, arg, sizeof(preg)))
|
|
return -EFAULT;
|
|
if(preg.addr >= SAA7196_NUMREGS)
|
|
return -EINVAL;
|
|
saa_set (preg.addr, preg.val, pb);
|
|
return 0;
|
|
}
|
|
|
|
case PLANBIOCGSTAT:
|
|
{
|
|
struct planb_stat_regs pstat;
|
|
|
|
DEBUG("PlanB: IOCTL PLANBIOCGSTAT\n");
|
|
|
|
pstat.ch1_stat = in_le32(&pb->planb_base->ch1.status);
|
|
pstat.ch2_stat = in_le32(&pb->planb_base->ch2.status);
|
|
pstat.saa_stat0 = saa_status(0, pb);
|
|
pstat.saa_stat1 = saa_status(1, pb);
|
|
|
|
if(copy_to_user((void *)arg, (void *)&pstat,
|
|
sizeof(pstat)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
case PLANBIOCSMODE: {
|
|
int v;
|
|
|
|
DEBUG("PlanB: IOCTL PLANBIOCSMODE\n");
|
|
|
|
if(copy_from_user(&v, arg, sizeof(v)))
|
|
return -EFAULT;
|
|
|
|
switch(v)
|
|
{
|
|
case PLANB_TV_MODE:
|
|
saa_set (SAA7196_STDC,
|
|
(saa_regs[pb->win.norm][SAA7196_STDC] &
|
|
0x7f), pb);
|
|
break;
|
|
case PLANB_VTR_MODE:
|
|
saa_set (SAA7196_STDC,
|
|
(saa_regs[pb->win.norm][SAA7196_STDC] |
|
|
0x80), pb);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
pb->win.mode = v;
|
|
return 0;
|
|
}
|
|
case PLANBIOCGMODE: {
|
|
int v=pb->win.mode;
|
|
|
|
DEBUG("PlanB: IOCTL PLANBIOCGMODE\n");
|
|
|
|
if(copy_to_user(arg,&v,sizeof(v)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
#ifdef PLANB_GSCANLINE
|
|
case PLANBG_GRAB_BPL: {
|
|
int v=pb->gbytes_per_line;
|
|
|
|
DEBUG("PlanB: IOCTL PLANBG_GRAB_BPL\n");
|
|
|
|
if(copy_to_user(arg,&v,sizeof(v)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
#endif /* PLANB_GSCANLINE */
|
|
case PLANB_INTR_DEBUG: {
|
|
int i;
|
|
|
|
DEBUG("PlanB: IOCTL PLANB_INTR_DEBUG\n");
|
|
|
|
if(copy_from_user(&i, arg, sizeof(i)))
|
|
return -EFAULT;
|
|
|
|
/* avoid hang ups all together */
|
|
for (i = 0; i < MAX_GBUFFERS; i++) {
|
|
if(pb->frame_stat[i] == GBUFFER_GRABBING) {
|
|
pb->frame_stat[i] = GBUFFER_DONE;
|
|
}
|
|
}
|
|
if(pb->grabbing)
|
|
pb->grabbing--;
|
|
wake_up_interruptible(&pb->capq);
|
|
return 0;
|
|
}
|
|
case PLANB_INV_REGS: {
|
|
int i;
|
|
struct planb_any_regs any;
|
|
|
|
DEBUG("PlanB: IOCTL PLANB_INV_REGS\n");
|
|
|
|
if(copy_from_user(&any, arg, sizeof(any)))
|
|
return -EFAULT;
|
|
if(any.offset < 0 || any.offset + any.bytes > 0x400)
|
|
return -EINVAL;
|
|
if(any.bytes > 128)
|
|
return -EINVAL;
|
|
for (i = 0; i < any.bytes; i++) {
|
|
any.data[i] =
|
|
in_8((unsigned char *)pb->planb_base
|
|
+ any.offset + i);
|
|
}
|
|
if(copy_to_user(arg,&any,sizeof(any)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
default:
|
|
{
|
|
DEBUG("PlanB: Unimplemented IOCTL\n");
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
/* Some IOCTLs are currently unsupported on PlanB */
|
|
case VIDIOCGTUNER: {
|
|
DEBUG("PlanB: IOCTL VIDIOCGTUNER\n");
|
|
goto unimplemented; }
|
|
case VIDIOCSTUNER: {
|
|
DEBUG("PlanB: IOCTL VIDIOCSTUNER\n");
|
|
goto unimplemented; }
|
|
case VIDIOCSFREQ: {
|
|
DEBUG("PlanB: IOCTL VIDIOCSFREQ\n");
|
|
goto unimplemented; }
|
|
case VIDIOCGFREQ: {
|
|
DEBUG("PlanB: IOCTL VIDIOCGFREQ\n");
|
|
goto unimplemented; }
|
|
case VIDIOCKEY: {
|
|
DEBUG("PlanB: IOCTL VIDIOCKEY\n");
|
|
goto unimplemented; }
|
|
case VIDIOCSAUDIO: {
|
|
DEBUG("PlanB: IOCTL VIDIOCSAUDIO\n");
|
|
goto unimplemented; }
|
|
case VIDIOCGAUDIO: {
|
|
DEBUG("PlanB: IOCTL VIDIOCGAUDIO\n");
|
|
goto unimplemented; }
|
|
unimplemented:
|
|
DEBUG(" Unimplemented\n");
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int planb_mmap(struct vm_area_struct *vma, struct video_device *dev, const char *adr, unsigned long size)
|
|
{
|
|
int i;
|
|
struct planb *pb = (struct planb *)dev;
|
|
unsigned long start = (unsigned long)adr;
|
|
|
|
if (size > MAX_GBUFFERS * PLANB_MAX_FBUF)
|
|
return -EINVAL;
|
|
if (!pb->rawbuf) {
|
|
int err;
|
|
if((err=grabbuf_alloc(pb)))
|
|
return err;
|
|
}
|
|
for (i = 0; i < pb->rawbuf_size; i++) {
|
|
unsigned long pfn;
|
|
|
|
pfn = virt_to_phys((void *)pb->rawbuf[i]) >> PAGE_SHIFT;
|
|
if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED))
|
|
return -EAGAIN;
|
|
start += PAGE_SIZE;
|
|
if (size <= PAGE_SIZE)
|
|
break;
|
|
size -= PAGE_SIZE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct video_device planb_template=
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.name = PLANB_DEVICE_NAME,
|
|
.type = VID_TYPE_OVERLAY,
|
|
.hardware = VID_HARDWARE_PLANB,
|
|
.open = planb_open,
|
|
.close = planb_close,
|
|
.read = planb_read,
|
|
.write = planb_write,
|
|
.ioctl = planb_ioctl,
|
|
.mmap = planb_mmap, /* mmap? */
|
|
};
|
|
|
|
static int init_planb(struct planb *pb)
|
|
{
|
|
unsigned char saa_rev;
|
|
int i, result;
|
|
|
|
memset ((void *) &pb->win, 0, sizeof (struct planb_window));
|
|
/* Simple sanity check */
|
|
if(def_norm >= NUM_SUPPORTED_NORM || def_norm < 0) {
|
|
printk(KERN_ERR "PlanB: Option(s) invalid\n");
|
|
return -2;
|
|
}
|
|
pb->win.norm = def_norm;
|
|
pb->win.mode = PLANB_TV_MODE; /* TV mode */
|
|
pb->win.interlace=1;
|
|
pb->win.x=0;
|
|
pb->win.y=0;
|
|
pb->win.width=768; /* 640 */
|
|
pb->win.height=576; /* 480 */
|
|
pb->maxlines=576;
|
|
#if 0
|
|
btv->win.cropwidth=768; /* 640 */
|
|
btv->win.cropheight=576; /* 480 */
|
|
btv->win.cropx=0;
|
|
btv->win.cropy=0;
|
|
#endif
|
|
pb->win.pad=0;
|
|
pb->win.bpp=4;
|
|
pb->win.depth=32;
|
|
pb->win.color_fmt=PLANB_COLOUR32;
|
|
pb->win.bpl=1024*pb->win.bpp;
|
|
pb->win.swidth=1024;
|
|
pb->win.sheight=768;
|
|
#ifdef PLANB_GSCANLINE
|
|
if((pb->gbytes_per_line = PLANB_MAXPIXELS * 4) > PAGE_SIZE
|
|
|| (pb->gbytes_per_line <= 0))
|
|
return -3;
|
|
else {
|
|
/* page align pb->gbytes_per_line for DMA purpose */
|
|
for(i = PAGE_SIZE; pb->gbytes_per_line < (i>>1);)
|
|
i>>=1;
|
|
pb->gbytes_per_line = i;
|
|
}
|
|
#endif
|
|
pb->tab_size = PLANB_MAXLINES + 40;
|
|
pb->suspend = 0;
|
|
init_MUTEX(&pb->lock);
|
|
pb->ch1_cmd = 0;
|
|
pb->ch2_cmd = 0;
|
|
pb->mask = 0;
|
|
pb->priv_space = 0;
|
|
pb->offset = 0;
|
|
pb->user = 0;
|
|
pb->overlay = 0;
|
|
init_waitqueue_head(&pb->suspendq);
|
|
pb->cmd_buff_inited = 0;
|
|
pb->frame_buffer_phys = 0;
|
|
|
|
/* Reset DMA controllers */
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
|
|
saa_rev = (saa_status(0, pb) & 0xf0) >> 4;
|
|
printk(KERN_INFO "PlanB: SAA7196 video processor rev. %d\n", saa_rev);
|
|
/* Initialize the SAA registers in memory and on chip */
|
|
saa_init_regs (pb);
|
|
|
|
/* clear interrupt mask */
|
|
pb->intr_mask = PLANB_CLR_IRQ;
|
|
|
|
result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb);
|
|
if (result < 0) {
|
|
if (result==-EINVAL)
|
|
printk(KERN_ERR "PlanB: Bad irq number (%d) "
|
|
"or handler\n", (int)pb->irq);
|
|
else if (result==-EBUSY)
|
|
printk(KERN_ERR "PlanB: I don't know why, "
|
|
"but IRQ %d is busy\n", (int)pb->irq);
|
|
return result;
|
|
}
|
|
disable_irq(pb->irq);
|
|
|
|
/* Now add the template and register the device unit. */
|
|
memcpy(&pb->video_dev,&planb_template,sizeof(planb_template));
|
|
|
|
pb->picture.brightness=0x90<<8;
|
|
pb->picture.contrast = 0x70 << 8;
|
|
pb->picture.colour = 0x70<<8;
|
|
pb->picture.hue = 0x8000;
|
|
pb->picture.whiteness = 0;
|
|
pb->picture.depth = pb->win.depth;
|
|
|
|
pb->frame_stat=NULL;
|
|
init_waitqueue_head(&pb->capq);
|
|
for(i=0; i<MAX_GBUFFERS; i++) {
|
|
pb->gbuf_idx[i] = PLANB_MAX_FBUF * i / PAGE_SIZE;
|
|
pb->gwidth[i]=0;
|
|
pb->gheight[i]=0;
|
|
pb->gfmt[i]=0;
|
|
pb->cap_cmd[i]=NULL;
|
|
#ifndef PLANB_GSCANLINE
|
|
pb->l_fr_addr_idx[i] = MAX_GBUFFERS * (PLANB_MAX_FBUF
|
|
/ PAGE_SIZE + 1) + MAX_LNUM * i;
|
|
pb->lsize[i] = 0;
|
|
pb->lnum[i] = 0;
|
|
#endif
|
|
}
|
|
pb->rawbuf=NULL;
|
|
pb->grabbing=0;
|
|
|
|
/* enable interrupts */
|
|
out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
|
|
pb->intr_mask = PLANB_FRM_IRQ;
|
|
enable_irq(pb->irq);
|
|
|
|
if(video_register_device(&pb->video_dev, VFL_TYPE_GRABBER, video_nr)<0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Scan for a PlanB controller, request the irq and map the io memory
|
|
*/
|
|
|
|
static int find_planb(void)
|
|
{
|
|
struct planb *pb;
|
|
struct device_node *planb_devices;
|
|
unsigned char dev_fn, confreg, bus;
|
|
unsigned int old_base, new_base;
|
|
unsigned int irq;
|
|
struct pci_dev *pdev;
|
|
int rc;
|
|
|
|
if (_machine != _MACH_Pmac)
|
|
return 0;
|
|
|
|
planb_devices = find_devices("planb");
|
|
if (planb_devices == 0) {
|
|
planb_num=0;
|
|
printk(KERN_WARNING "PlanB: no device found!\n");
|
|
return planb_num;
|
|
}
|
|
|
|
if (planb_devices->next != NULL)
|
|
printk(KERN_ERR "Warning: only using first PlanB device!\n");
|
|
pb = &planbs[0];
|
|
planb_num = 1;
|
|
|
|
if (planb_devices->n_addrs != 1) {
|
|
printk (KERN_WARNING "PlanB: expecting 1 address for planb "
|
|
"(got %d)", planb_devices->n_addrs);
|
|
return 0;
|
|
}
|
|
|
|
if (planb_devices->n_intrs == 0) {
|
|
printk(KERN_WARNING "PlanB: no intrs for device %s\n",
|
|
planb_devices->full_name);
|
|
return 0;
|
|
} else {
|
|
irq = planb_devices->intrs[0].line;
|
|
}
|
|
|
|
/* Initialize PlanB's PCI registers */
|
|
|
|
/* There is a bug with the way OF assigns addresses
|
|
to the devices behind the chaos bridge.
|
|
control needs only 0x1000 of space, but decodes only
|
|
the upper 16 bits. It therefore occupies a full 64K.
|
|
OF assigns the planb controller memory within this space;
|
|
so we need to change that here in order to access planb. */
|
|
|
|
/* We remap to 0xf1000000 in hope that nobody uses it ! */
|
|
|
|
bus = (planb_devices->addrs[0].space >> 16) & 0xff;
|
|
dev_fn = (planb_devices->addrs[0].space >> 8) & 0xff;
|
|
confreg = planb_devices->addrs[0].space & 0xff;
|
|
old_base = planb_devices->addrs[0].address;
|
|
new_base = 0xf1000000;
|
|
|
|
DEBUG("PlanB: Found on bus %d, dev %d, func %d, "
|
|
"membase 0x%x (base reg. 0x%x)\n",
|
|
bus, PCI_SLOT(dev_fn), PCI_FUNC(dev_fn), old_base, confreg);
|
|
|
|
pdev = pci_find_slot (bus, dev_fn);
|
|
if (!pdev) {
|
|
printk(KERN_ERR "planb: cannot find slot\n");
|
|
goto err_out;
|
|
}
|
|
|
|
/* Enable response in memory space, bus mastering,
|
|
use memory write and invalidate */
|
|
rc = pci_enable_device(pdev);
|
|
if (rc) {
|
|
printk(KERN_ERR "planb: cannot enable PCI device %s\n",
|
|
pci_name(pdev));
|
|
goto err_out;
|
|
}
|
|
rc = pci_set_mwi(pdev);
|
|
if (rc) {
|
|
printk(KERN_ERR "planb: cannot enable MWI on PCI device %s\n",
|
|
pci_name(pdev));
|
|
goto err_out_disable;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
/* Set the new base address */
|
|
pci_write_config_dword (pdev, confreg, new_base);
|
|
|
|
planb_regs = (volatile struct planb_registers *)
|
|
ioremap (new_base, 0x400);
|
|
pb->planb_base = planb_regs;
|
|
pb->planb_base_phys = (struct planb_registers *)new_base;
|
|
pb->irq = irq;
|
|
|
|
return planb_num;
|
|
|
|
err_out_disable:
|
|
pci_disable_device(pdev);
|
|
err_out:
|
|
/* FIXME handle error */ /* comment moved from pci_find_slot, above */
|
|
return 0;
|
|
}
|
|
|
|
static void release_planb(void)
|
|
{
|
|
int i;
|
|
struct planb *pb;
|
|
|
|
for (i=0;i<planb_num; i++)
|
|
{
|
|
pb=&planbs[i];
|
|
|
|
/* stop and flash DMAs unconditionally */
|
|
planb_dbdma_stop(&pb->planb_base->ch2);
|
|
planb_dbdma_stop(&pb->planb_base->ch1);
|
|
|
|
/* clear and free interrupts */
|
|
pb->intr_mask = PLANB_CLR_IRQ;
|
|
out_le32 (&pb->planb_base->intr_stat, PLANB_CLR_IRQ);
|
|
free_irq(pb->irq, pb);
|
|
|
|
/* make sure all allocated memory are freed */
|
|
planb_prepare_close(pb);
|
|
|
|
printk(KERN_INFO "PlanB: unregistering with v4l\n");
|
|
video_unregister_device(&pb->video_dev);
|
|
|
|
/* note that iounmap() does nothing on the PPC right now */
|
|
iounmap ((void *)pb->planb_base);
|
|
}
|
|
}
|
|
|
|
static int __init init_planbs(void)
|
|
{
|
|
int i;
|
|
|
|
if (find_planb()<=0)
|
|
return -EIO;
|
|
|
|
for (i=0; i<planb_num; i++) {
|
|
if (init_planb(&planbs[i])<0) {
|
|
printk(KERN_ERR "PlanB: error registering device %d"
|
|
" with v4l\n", i);
|
|
release_planb();
|
|
return -EIO;
|
|
}
|
|
printk(KERN_INFO "PlanB: registered device %d with v4l\n", i);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void __exit exit_planbs(void)
|
|
{
|
|
release_planb();
|
|
}
|
|
|
|
module_init(init_planbs);
|
|
module_exit(exit_planbs);
|