android_kernel_xiaomi_sm8350/drivers/media/video/pxa_camera.c
Guennadi Liakhovetski ad5f2e859d V4L/DVB (7336): soc-camera: streamline hardware parameter negotiation
Improve hardware parameter negotiation between the camera host driver and
camera drivers. Parameters like horizontal and vertical synchronisation,
pixel clock polarity shall be set depending on capabilities of the
parties.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:49 -03:00

986 lines
25 KiB
C

/*
* V4L2 Driver for PXA camera host
*
* Copyright (C) 2006, Sascha Hauer, Pengutronix
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/moduleparam.h>
#include <linux/time.h>
#include <linux/version.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/clk.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
#include <media/soc_camera.h>
#include <linux/videodev2.h>
#include <asm/dma.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/camera.h>
#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
#define PXA_CAM_DRV_NAME "pxa27x-camera"
#define CICR0_SIM_MP (0 << 24)
#define CICR0_SIM_SP (1 << 24)
#define CICR0_SIM_MS (2 << 24)
#define CICR0_SIM_EP (3 << 24)
#define CICR0_SIM_ES (4 << 24)
#define CICR1_DW_VAL(x) ((x) & CICR1_DW) /* Data bus width */
#define CICR1_PPL_VAL(x) (((x) << 15) & CICR1_PPL) /* Pixels per line */
#define CICR2_BLW_VAL(x) (((x) << 24) & CICR2_BLW) /* Beginning-of-line pixel clock wait count */
#define CICR2_ELW_VAL(x) (((x) << 16) & CICR2_ELW) /* End-of-line pixel clock wait count */
#define CICR2_HSW_VAL(x) (((x) << 10) & CICR2_HSW) /* Horizontal sync pulse width */
#define CICR2_BFPW_VAL(x) (((x) << 3) & CICR2_BFPW) /* Beginning-of-frame pixel clock wait count */
#define CICR2_FSW_VAL(x) (((x) << 0) & CICR2_FSW) /* Frame stabilization wait count */
#define CICR3_BFW_VAL(x) (((x) << 24) & CICR3_BFW) /* Beginning-of-frame line clock wait count */
#define CICR3_EFW_VAL(x) (((x) << 16) & CICR3_EFW) /* End-of-frame line clock wait count */
#define CICR3_VSW_VAL(x) (((x) << 11) & CICR3_VSW) /* Vertical sync pulse width */
#define CICR3_LPF_VAL(x) (((x) << 0) & CICR3_LPF) /* Lines per frame */
#define CICR0_IRQ_MASK (CICR0_TOM | CICR0_RDAVM | CICR0_FEM | CICR0_EOLM | \
CICR0_PERRM | CICR0_QDM | CICR0_CDM | CICR0_SOFM | \
CICR0_EOFM | CICR0_FOM)
static DEFINE_MUTEX(camera_lock);
/*
* Structures
*/
/* buffer for one video frame */
struct pxa_buffer {
/* common v4l buffer stuff -- must be first */
struct videobuf_buffer vb;
const struct soc_camera_data_format *fmt;
/* our descriptor list needed for the PXA DMA engine */
dma_addr_t sg_dma;
struct pxa_dma_desc *sg_cpu;
size_t sg_size;
int inwork;
};
struct pxa_framebuffer_queue {
dma_addr_t sg_last_dma;
struct pxa_dma_desc *sg_last_cpu;
};
struct pxa_camera_dev {
struct device *dev;
/* PXA27x is only supposed to handle one camera on its Quick Capture
* interface. If anyone ever builds hardware to enable more than
* one camera, they will have to modify this driver too */
struct soc_camera_device *icd;
struct clk *clk;
unsigned int irq;
void __iomem *base;
unsigned int dma_chan_y;
struct pxacamera_platform_data *pdata;
struct resource *res;
unsigned long platform_flags;
unsigned long platform_mclk_10khz;
struct list_head capture;
spinlock_t lock;
struct pxa_buffer *active;
};
static const char *pxa_cam_driver_description = "PXA_Camera";
static unsigned int vid_limit = 16; /* Video memory limit, in Mb */
/*
* Videobuf operations
*/
static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
unsigned int *size)
{
struct soc_camera_device *icd = vq->priv_data;
dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
*size = icd->width * icd->height * ((icd->current_fmt->depth + 7) >> 3);
if (0 == *count)
*count = 32;
while (*size * *count > vid_limit * 1024 * 1024)
(*count)--;
return 0;
}
static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
{
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici =
to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
BUG_ON(in_interrupt());
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __FUNCTION__,
&buf->vb, buf->vb.baddr, buf->vb.bsize);
/* This waits until this buffer is out of danger, i.e., until it is no
* longer in STATE_QUEUED or STATE_ACTIVE */
videobuf_waiton(&buf->vb, 0, 0);
videobuf_dma_unmap(vq, dma);
videobuf_dma_free(dma);
if (buf->sg_cpu)
dma_free_coherent(pcdev->dev, buf->sg_size, buf->sg_cpu,
buf->sg_dma);
buf->sg_cpu = NULL;
buf->vb.state = VIDEOBUF_NEEDS_INIT;
}
static int pxa_videobuf_prepare(struct videobuf_queue *vq,
struct videobuf_buffer *vb, enum v4l2_field field)
{
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici =
to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
int i, ret;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __FUNCTION__,
vb, vb->baddr, vb->bsize);
/* Added list head initialization on alloc */
WARN_ON(!list_empty(&vb->queue));
#ifdef DEBUG
/* This can be useful if you want to see if we actually fill
* the buffer with something */
memset((void *)vb->baddr, 0xaa, vb->bsize);
#endif
BUG_ON(NULL == icd->current_fmt);
/* I think, in buf_prepare you only have to protect global data,
* the actual buffer is yours */
buf->inwork = 1;
if (buf->fmt != icd->current_fmt ||
vb->width != icd->width ||
vb->height != icd->height ||
vb->field != field) {
buf->fmt = icd->current_fmt;
vb->width = icd->width;
vb->height = icd->height;
vb->field = field;
vb->state = VIDEOBUF_NEEDS_INIT;
}
vb->size = vb->width * vb->height * ((buf->fmt->depth + 7) >> 3);
if (0 != vb->baddr && vb->bsize < vb->size) {
ret = -EINVAL;
goto out;
}
if (vb->state == VIDEOBUF_NEEDS_INIT) {
unsigned int size = vb->size;
struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
ret = videobuf_iolock(vq, vb, NULL);
if (ret)
goto fail;
if (buf->sg_cpu)
dma_free_coherent(pcdev->dev, buf->sg_size, buf->sg_cpu,
buf->sg_dma);
buf->sg_size = (dma->sglen + 1) * sizeof(struct pxa_dma_desc);
buf->sg_cpu = dma_alloc_coherent(pcdev->dev, buf->sg_size,
&buf->sg_dma, GFP_KERNEL);
if (!buf->sg_cpu) {
ret = -ENOMEM;
goto fail;
}
dev_dbg(&icd->dev, "nents=%d size: %d sg=0x%p\n",
dma->sglen, size, dma->sglist);
for (i = 0; i < dma->sglen; i++) {
struct scatterlist *sg = dma->sglist;
unsigned int dma_len = sg_dma_len(&sg[i]), xfer_len;
/* CIBR0 */
buf->sg_cpu[i].dsadr = pcdev->res->start + 0x28;
buf->sg_cpu[i].dtadr = sg_dma_address(&sg[i]);
/* PXA270 Developer's Manual 27.4.4.1:
* round up to 8 bytes */
xfer_len = (min(dma_len, size) + 7) & ~7;
if (xfer_len & 7)
dev_err(&icd->dev, "Unaligned buffer: "
"dma_len %u, size %u\n", dma_len, size);
buf->sg_cpu[i].dcmd = DCMD_FLOWSRC | DCMD_BURST8 |
DCMD_INCTRGADDR | xfer_len;
size -= dma_len;
buf->sg_cpu[i].ddadr = buf->sg_dma + (i + 1) *
sizeof(struct pxa_dma_desc);
}
buf->sg_cpu[dma->sglen - 1].ddadr = DDADR_STOP;
buf->sg_cpu[dma->sglen - 1].dcmd |= DCMD_ENDIRQEN;
vb->state = VIDEOBUF_PREPARED;
}
buf->inwork = 0;
return 0;
fail:
free_buffer(vq, buf);
out:
buf->inwork = 0;
return ret;
}
static void pxa_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici =
to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
struct pxa_buffer *active;
struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
int nents = dma->sglen;
unsigned long flags;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __FUNCTION__,
vb, vb->baddr, vb->bsize);
spin_lock_irqsave(&pcdev->lock, flags);
list_add_tail(&vb->queue, &pcdev->capture);
vb->state = VIDEOBUF_ACTIVE;
active = pcdev->active;
if (!active) {
CIFR |= CIFR_RESET_F;
DDADR(pcdev->dma_chan_y) = buf->sg_dma;
DCSR(pcdev->dma_chan_y) = DCSR_RUN;
pcdev->active = buf;
CICR0 |= CICR0_ENB;
} else {
struct videobuf_dmabuf *active_dma =
videobuf_to_dma(&active->vb);
/* Stop DMA engine */
DCSR(pcdev->dma_chan_y) = 0;
/* Add the descriptors we just initialized to the currently
* running chain
*/
active->sg_cpu[active_dma->sglen - 1].ddadr = buf->sg_dma;
/* Setup a dummy descriptor with the DMA engines current
* state
*/
/* CIBR0 */
buf->sg_cpu[nents].dsadr = pcdev->res->start + 0x28;
buf->sg_cpu[nents].dtadr = DTADR(pcdev->dma_chan_y);
buf->sg_cpu[nents].dcmd = DCMD(pcdev->dma_chan_y);
if (DDADR(pcdev->dma_chan_y) == DDADR_STOP) {
/* The DMA engine is on the last descriptor, set the
* next descriptors address to the descriptors
* we just initialized
*/
buf->sg_cpu[nents].ddadr = buf->sg_dma;
} else {
buf->sg_cpu[nents].ddadr = DDADR(pcdev->dma_chan_y);
}
/* The next descriptor is the dummy descriptor */
DDADR(pcdev->dma_chan_y) = buf->sg_dma + nents *
sizeof(struct pxa_dma_desc);
#ifdef DEBUG
if (CISR & CISR_IFO_0) {
dev_warn(pcdev->dev, "FIFO overrun\n");
DDADR(pcdev->dma_chan_y) = pcdev->active->sg_dma;
CICR0 &= ~CICR0_ENB;
CIFR |= CIFR_RESET_F;
DCSR(pcdev->dma_chan_y) = DCSR_RUN;
CICR0 |= CICR0_ENB;
} else
#endif
DCSR(pcdev->dma_chan_y) = DCSR_RUN;
}
spin_unlock_irqrestore(&pcdev->lock, flags);
}
static void pxa_videobuf_release(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
#ifdef DEBUG
struct soc_camera_device *icd = vq->priv_data;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __FUNCTION__,
vb, vb->baddr, vb->bsize);
switch (vb->state) {
case VIDEOBUF_ACTIVE:
dev_dbg(&icd->dev, "%s (active)\n", __FUNCTION__);
break;
case VIDEOBUF_QUEUED:
dev_dbg(&icd->dev, "%s (queued)\n", __FUNCTION__);
break;
case VIDEOBUF_PREPARED:
dev_dbg(&icd->dev, "%s (prepared)\n", __FUNCTION__);
break;
default:
dev_dbg(&icd->dev, "%s (unknown)\n", __FUNCTION__);
break;
}
#endif
free_buffer(vq, buf);
}
static void pxa_camera_dma_irq_y(int channel, void *data)
{
struct pxa_camera_dev *pcdev = data;
struct pxa_buffer *buf;
unsigned long flags;
unsigned int status;
struct videobuf_buffer *vb;
spin_lock_irqsave(&pcdev->lock, flags);
status = DCSR(pcdev->dma_chan_y);
DCSR(pcdev->dma_chan_y) = status;
if (status & DCSR_BUSERR) {
dev_err(pcdev->dev, "DMA Bus Error IRQ!\n");
goto out;
}
if (!(status & DCSR_ENDINTR)) {
dev_err(pcdev->dev, "Unknown DMA IRQ source, "
"status: 0x%08x\n", status);
goto out;
}
if (!pcdev->active) {
dev_err(pcdev->dev, "DMA End IRQ with no active buffer!\n");
goto out;
}
vb = &pcdev->active->vb;
buf = container_of(vb, struct pxa_buffer, vb);
WARN_ON(buf->inwork || list_empty(&vb->queue));
dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __FUNCTION__,
vb, vb->baddr, vb->bsize);
/* _init is used to debug races, see comment in pxa_camera_reqbufs() */
list_del_init(&vb->queue);
vb->state = VIDEOBUF_DONE;
do_gettimeofday(&vb->ts);
vb->field_count++;
wake_up(&vb->done);
if (list_empty(&pcdev->capture)) {
pcdev->active = NULL;
DCSR(pcdev->dma_chan_y) = 0;
CICR0 &= ~CICR0_ENB;
goto out;
}
pcdev->active = list_entry(pcdev->capture.next, struct pxa_buffer,
vb.queue);
out:
spin_unlock_irqrestore(&pcdev->lock, flags);
}
static struct videobuf_queue_ops pxa_videobuf_ops = {
.buf_setup = pxa_videobuf_setup,
.buf_prepare = pxa_videobuf_prepare,
.buf_queue = pxa_videobuf_queue,
.buf_release = pxa_videobuf_release,
};
static int mclk_get_divisor(struct pxa_camera_dev *pcdev)
{
unsigned int mclk_10khz = pcdev->platform_mclk_10khz;
unsigned long div;
unsigned long lcdclk;
lcdclk = clk_get_rate(pcdev->clk) / 10000;
/* We verify platform_mclk_10khz != 0, so if anyone breaks it, here
* they get a nice Oops */
div = (lcdclk + 2 * mclk_10khz - 1) / (2 * mclk_10khz) - 1;
dev_dbg(pcdev->dev, "LCD clock %lukHz, target freq %dkHz, "
"divisor %lu\n", lcdclk * 10, mclk_10khz * 10, div);
return div;
}
static void pxa_camera_activate(struct pxa_camera_dev *pcdev)
{
struct pxacamera_platform_data *pdata = pcdev->pdata;
u32 cicr4 = 0;
dev_dbg(pcdev->dev, "Registered platform device at %p data %p\n",
pcdev, pdata);
if (pdata && pdata->init) {
dev_dbg(pcdev->dev, "%s: Init gpios\n", __FUNCTION__);
pdata->init(pcdev->dev);
}
if (pdata && pdata->power) {
dev_dbg(pcdev->dev, "%s: Power on camera\n", __FUNCTION__);
pdata->power(pcdev->dev, 1);
}
if (pdata && pdata->reset) {
dev_dbg(pcdev->dev, "%s: Releasing camera reset\n",
__FUNCTION__);
pdata->reset(pcdev->dev, 1);
}
CICR0 = 0x3FF; /* disable all interrupts */
if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
cicr4 |= CICR4_PCLK_EN;
if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN)
cicr4 |= CICR4_MCLK_EN;
if (pcdev->platform_flags & PXA_CAMERA_PCP)
cicr4 |= CICR4_PCP;
if (pcdev->platform_flags & PXA_CAMERA_HSP)
cicr4 |= CICR4_HSP;
if (pcdev->platform_flags & PXA_CAMERA_VSP)
cicr4 |= CICR4_VSP;
CICR4 = mclk_get_divisor(pcdev) | cicr4;
clk_enable(pcdev->clk);
}
static void pxa_camera_deactivate(struct pxa_camera_dev *pcdev)
{
struct pxacamera_platform_data *board = pcdev->pdata;
clk_disable(pcdev->clk);
if (board && board->reset) {
dev_dbg(pcdev->dev, "%s: Asserting camera reset\n",
__FUNCTION__);
board->reset(pcdev->dev, 0);
}
if (board && board->power) {
dev_dbg(pcdev->dev, "%s: Power off camera\n", __FUNCTION__);
board->power(pcdev->dev, 0);
}
}
static irqreturn_t pxa_camera_irq(int irq, void *data)
{
struct pxa_camera_dev *pcdev = data;
unsigned int status = CISR;
dev_dbg(pcdev->dev, "Camera interrupt status 0x%x\n", status);
CISR = status;
return IRQ_HANDLED;
}
/* The following two functions absolutely depend on the fact, that
* there can be only one camera on PXA quick capture interface */
static int pxa_camera_add_device(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
int ret;
mutex_lock(&camera_lock);
if (pcdev->icd) {
ret = -EBUSY;
goto ebusy;
}
dev_info(&icd->dev, "PXA Camera driver attached to camera %d\n",
icd->devnum);
pxa_camera_activate(pcdev);
ret = icd->ops->init(icd);
if (!ret)
pcdev->icd = icd;
ebusy:
mutex_unlock(&camera_lock);
return ret;
}
static void pxa_camera_remove_device(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
BUG_ON(icd != pcdev->icd);
dev_info(&icd->dev, "PXA Camera driver detached from camera %d\n",
icd->devnum);
/* disable capture, disable interrupts */
CICR0 = 0x3ff;
/* Stop DMA engine */
DCSR(pcdev->dma_chan_y) = 0;
icd->ops->release(icd);
pxa_camera_deactivate(pcdev);
pcdev->icd = NULL;
}
static int test_platform_param(struct pxa_camera_dev *pcdev,
unsigned char buswidth, unsigned long *flags)
{
/*
* Platform specified synchronization and pixel clock polarities are
* only a recommendation and are only used during probing. The PXA270
* quick capture interface supports both.
*/
*flags = (pcdev->platform_flags & PXA_CAMERA_MASTER ?
SOCAM_MASTER : SOCAM_SLAVE) |
SOCAM_HSYNC_ACTIVE_HIGH |
SOCAM_HSYNC_ACTIVE_LOW |
SOCAM_VSYNC_ACTIVE_HIGH |
SOCAM_VSYNC_ACTIVE_LOW |
SOCAM_PCLK_SAMPLE_RISING |
SOCAM_PCLK_SAMPLE_FALLING;
/* If requested data width is supported by the platform, use it */
switch (buswidth) {
case 10:
if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_10))
return -EINVAL;
*flags |= SOCAM_DATAWIDTH_10;
break;
case 9:
if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_9))
return -EINVAL;
*flags |= SOCAM_DATAWIDTH_9;
break;
case 8:
if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8))
return -EINVAL;
*flags |= SOCAM_DATAWIDTH_8;
}
return 0;
}
static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
{
struct soc_camera_host *ici =
to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
unsigned long dw, bpp, bus_flags, camera_flags, common_flags;
u32 cicr0, cicr4 = 0;
int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags);
if (ret < 0)
return ret;
camera_flags = icd->ops->query_bus_param(icd);
common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
if (!common_flags)
return -EINVAL;
/* Make choises, based on platform preferences */
if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
(common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
if (pcdev->platform_flags & PXA_CAMERA_HSP)
common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
else
common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
}
if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
(common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
if (pcdev->platform_flags & PXA_CAMERA_VSP)
common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
else
common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
}
if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
(common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
if (pcdev->platform_flags & PXA_CAMERA_PCP)
common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
else
common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
}
ret = icd->ops->set_bus_param(icd, common_flags);
if (ret < 0)
return ret;
/* Datawidth is now guaranteed to be equal to one of the three values.
* We fix bit-per-pixel equal to data-width... */
switch (common_flags & SOCAM_DATAWIDTH_MASK) {
case SOCAM_DATAWIDTH_10:
icd->buswidth = 10;
dw = 4;
bpp = 0x40;
break;
case SOCAM_DATAWIDTH_9:
icd->buswidth = 9;
dw = 3;
bpp = 0x20;
break;
default:
/* Actually it can only be 8 now,
* default is just to silence compiler warnings */
case SOCAM_DATAWIDTH_8:
icd->buswidth = 8;
dw = 2;
bpp = 0;
}
if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
cicr4 |= CICR4_PCLK_EN;
if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN)
cicr4 |= CICR4_MCLK_EN;
if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
cicr4 |= CICR4_PCP;
if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
cicr4 |= CICR4_HSP;
if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
cicr4 |= CICR4_VSP;
cicr0 = CICR0;
if (cicr0 & CICR0_ENB)
CICR0 = cicr0 & ~CICR0_ENB;
CICR1 = CICR1_PPL_VAL(icd->width - 1) | bpp | dw;
CICR2 = 0;
CICR3 = CICR3_LPF_VAL(icd->height - 1) |
CICR3_BFW_VAL(min((unsigned short)255, icd->y_skip_top));
CICR4 = mclk_get_divisor(pcdev) | cicr4;
/* CIF interrupts are not used, only DMA */
CICR0 = (pcdev->platform_flags & PXA_CAMERA_MASTER ?
CICR0_SIM_MP : (CICR0_SL_CAP_EN | CICR0_SIM_SP)) |
CICR0_DMAEN | CICR0_IRQ_MASK | (cicr0 & CICR0_ENB);
return 0;
}
static int pxa_camera_try_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
{
struct soc_camera_host *ici =
to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
unsigned long bus_flags, camera_flags;
int ret = test_platform_param(pcdev, icd->buswidth, &bus_flags);
if (ret < 0)
return ret;
camera_flags = icd->ops->query_bus_param(icd);
return soc_camera_bus_param_compatible(camera_flags, bus_flags) ? 0 : -EINVAL;
}
static int pxa_camera_set_fmt_cap(struct soc_camera_device *icd,
__u32 pixfmt, struct v4l2_rect *rect)
{
return icd->ops->set_fmt_cap(icd, pixfmt, rect);
}
static int pxa_camera_try_fmt_cap(struct soc_camera_device *icd,
struct v4l2_format *f)
{
/* limit to pxa hardware capabilities */
if (f->fmt.pix.height < 32)
f->fmt.pix.height = 32;
if (f->fmt.pix.height > 2048)
f->fmt.pix.height = 2048;
if (f->fmt.pix.width < 48)
f->fmt.pix.width = 48;
if (f->fmt.pix.width > 2048)
f->fmt.pix.width = 2048;
f->fmt.pix.width &= ~0x01;
/* limit to sensor capabilities */
return icd->ops->try_fmt_cap(icd, f);
}
static int pxa_camera_reqbufs(struct soc_camera_file *icf,
struct v4l2_requestbuffers *p)
{
int i;
/* This is for locking debugging only. I removed spinlocks and now I
* check whether .prepare is ever called on a linked buffer, or whether
* a dma IRQ can occur for an in-work or unlinked buffer. Until now
* it hadn't triggered */
for (i = 0; i < p->count; i++) {
struct pxa_buffer *buf = container_of(icf->vb_vidq.bufs[i],
struct pxa_buffer, vb);
buf->inwork = 0;
INIT_LIST_HEAD(&buf->vb.queue);
}
return 0;
}
static unsigned int pxa_camera_poll(struct file *file, poll_table *pt)
{
struct soc_camera_file *icf = file->private_data;
struct pxa_buffer *buf;
buf = list_entry(icf->vb_vidq.stream.next, struct pxa_buffer,
vb.stream);
poll_wait(file, &buf->vb.done, pt);
if (buf->vb.state == VIDEOBUF_DONE ||
buf->vb.state == VIDEOBUF_ERROR)
return POLLIN|POLLRDNORM;
return 0;
}
static int pxa_camera_querycap(struct soc_camera_host *ici,
struct v4l2_capability *cap)
{
/* cap->name is set by the firendly caller:-> */
strlcpy(cap->card, pxa_cam_driver_description, sizeof(cap->card));
cap->version = PXA_CAM_VERSION_CODE;
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
return 0;
}
/* Should beallocated dynamically too, but we have only one. */
static struct soc_camera_host pxa_soc_camera_host = {
.drv_name = PXA_CAM_DRV_NAME,
.vbq_ops = &pxa_videobuf_ops,
.add = pxa_camera_add_device,
.remove = pxa_camera_remove_device,
.msize = sizeof(struct pxa_buffer),
.set_fmt_cap = pxa_camera_set_fmt_cap,
.try_fmt_cap = pxa_camera_try_fmt_cap,
.reqbufs = pxa_camera_reqbufs,
.poll = pxa_camera_poll,
.querycap = pxa_camera_querycap,
.try_bus_param = pxa_camera_try_bus_param,
.set_bus_param = pxa_camera_set_bus_param,
};
static int pxa_camera_probe(struct platform_device *pdev)
{
struct pxa_camera_dev *pcdev;
struct resource *res;
void __iomem *base;
unsigned int irq;
int err = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!res || !irq) {
err = -ENODEV;
goto exit;
}
pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
if (!pcdev) {
dev_err(&pdev->dev, "Could not allocate pcdev\n");
err = -ENOMEM;
goto exit;
}
pcdev->clk = clk_get(&pdev->dev, "CAMCLK");
if (IS_ERR(pcdev->clk)) {
err = PTR_ERR(pcdev->clk);
goto exit_kfree;
}
dev_set_drvdata(&pdev->dev, pcdev);
pcdev->res = res;
pcdev->pdata = pdev->dev.platform_data;
pcdev->platform_flags = pcdev->pdata->flags;
if (!(pcdev->platform_flags & (PXA_CAMERA_DATAWIDTH_8 |
PXA_CAMERA_DATAWIDTH_9 | PXA_CAMERA_DATAWIDTH_10))) {
/* Platform hasn't set available data widths. This is bad.
* Warn and use a default. */
dev_warn(&pdev->dev, "WARNING! Platform hasn't set available "
"data widths, using default 10 bit\n");
pcdev->platform_flags |= PXA_CAMERA_DATAWIDTH_10;
}
pcdev->platform_mclk_10khz = pcdev->pdata->mclk_10khz;
if (!pcdev->platform_mclk_10khz) {
dev_warn(&pdev->dev,
"mclk_10khz == 0! Please, fix your platform data. "
"Using default 20MHz\n");
pcdev->platform_mclk_10khz = 2000;
}
INIT_LIST_HEAD(&pcdev->capture);
spin_lock_init(&pcdev->lock);
/*
* Request the regions.
*/
if (!request_mem_region(res->start, res->end - res->start + 1,
PXA_CAM_DRV_NAME)) {
err = -EBUSY;
goto exit_clk;
}
base = ioremap(res->start, res->end - res->start + 1);
if (!base) {
err = -ENOMEM;
goto exit_release;
}
pcdev->irq = irq;
pcdev->base = base;
pcdev->dev = &pdev->dev;
/* request dma */
pcdev->dma_chan_y = pxa_request_dma("CI_Y", DMA_PRIO_HIGH,
pxa_camera_dma_irq_y, pcdev);
if (pcdev->dma_chan_y < 0) {
dev_err(pcdev->dev, "Can't request DMA for Y\n");
err = -ENOMEM;
goto exit_iounmap;
}
dev_dbg(pcdev->dev, "got DMA channel %d\n", pcdev->dma_chan_y);
DRCMR68 = pcdev->dma_chan_y | DRCMR_MAPVLD;
/* request irq */
err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME,
pcdev);
if (err) {
dev_err(pcdev->dev, "Camera interrupt register failed \n");
goto exit_free_dma;
}
pxa_soc_camera_host.priv = pcdev;
pxa_soc_camera_host.dev.parent = &pdev->dev;
pxa_soc_camera_host.nr = pdev->id;
err = soc_camera_host_register(&pxa_soc_camera_host, THIS_MODULE);
if (err)
goto exit_free_irq;
return 0;
exit_free_irq:
free_irq(pcdev->irq, pcdev);
exit_free_dma:
pxa_free_dma(pcdev->dma_chan_y);
exit_iounmap:
iounmap(base);
exit_release:
release_mem_region(res->start, res->end - res->start + 1);
exit_clk:
clk_put(pcdev->clk);
exit_kfree:
kfree(pcdev);
exit:
return err;
}
static int __devexit pxa_camera_remove(struct platform_device *pdev)
{
struct pxa_camera_dev *pcdev = platform_get_drvdata(pdev);
struct resource *res;
clk_put(pcdev->clk);
pxa_free_dma(pcdev->dma_chan_y);
free_irq(pcdev->irq, pcdev);
soc_camera_host_unregister(&pxa_soc_camera_host);
iounmap(pcdev->base);
res = pcdev->res;
release_mem_region(res->start, res->end - res->start + 1);
kfree(pcdev);
dev_info(&pdev->dev, "PXA Camera driver unloaded\n");
return 0;
}
static struct platform_driver pxa_camera_driver = {
.driver = {
.name = PXA_CAM_DRV_NAME,
},
.probe = pxa_camera_probe,
.remove = __exit_p(pxa_camera_remove),
};
static int __devinit pxa_camera_init(void)
{
return platform_driver_register(&pxa_camera_driver);
}
static void __exit pxa_camera_exit(void)
{
return platform_driver_unregister(&pxa_camera_driver);
}
module_init(pxa_camera_init);
module_exit(pxa_camera_exit);
MODULE_DESCRIPTION("PXA27x SoC Camera Host driver");
MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
MODULE_LICENSE("GPL");