android_kernel_xiaomi_sm8350/drivers/usb
Alan Stern 9ad3d6ccf5 [PATCH] USB: Remove USB private semaphore
This patch (as605) removes the private udev->serialize semaphore,
relying instead on the locking provided by the embedded struct device's
semaphore.  The changes are confined to the core, except that the
usb_trylock_device routine now uses the return convention of
down_trylock rather than down_read_trylock (they return opposite values
for no good reason).

A couple of other associated changes are included as well:

	Now that we aren't concerned about HCDs that avoid using the
	hcd glue layer, usb_disconnect no longer needs to acquire the
	usb_bus_lock -- that can be done by usb_remove_hcd where it
	belongs.

	Devices aren't locked over the same scope of code in
	usb_new_device and hub_port_connect_change as they used to be.
	This shouldn't cause any trouble.

Along with the preceding driver core patch, this needs a lot of testing.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:34 -08:00
..
atm [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
class [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
core [PATCH] USB: Remove USB private semaphore 2006-01-04 13:48:34 -08:00
gadget [PATCH] USB: dummy_hcd: rename variables 2006-01-04 13:48:31 -08:00
host [PATCH] USB: Remove USB private semaphore 2006-01-04 13:48:34 -08:00
image [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
input [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
media [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
misc [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
mon [PATCH] USB: convert usbmon to use usb notifiers 2005-10-28 16:47:46 -07:00
net [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
serial [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
storage [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00
Kconfig
Makefile [PATCH] USB: drivers/usb/storage/libusual 2006-01-04 13:48:31 -08:00
README
usb-skeleton.c [PATCH] USB: remove .owner field from struct usb_driver 2006-01-04 13:48:34 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.