android_kernel_xiaomi_sm8350/include/asm-mips/war.h
Maciej W. Rozycki 20d60d9973 [MIPS] R4000/R4400 errata workarounds
This is the gereric part of R4000/R4400 errata workarounds.  They include 
compiler and assembler support as well as some source code modifications 
to address the problems with some combinations of multiply/divide+shift 
instructions as well as the daddi and daddiu instructions.

 Changes included are as follows:

1. New Kconfig options to select workarounds by platforms as necessary.

2. Arch top-level Makefile to pass necessary options to the compiler; also 
   incompatible configurations are detected (-mno-sym32 unsupported as 
   horribly intrusive for little gain).

3. Bug detection updated and shuffled -- the multiply/divide+shift problem 
   is lethal enough that if not worked around it makes the kernel crash in 
   time_init() because of a division by zero; the daddiu erratum might 
   also trigger early potentially, though I have not observed it.  On the 
   other hand the daddi detection code requires the exception subsystem to 
   have been initialised (and is there mainly for information).

4. r4k_daddiu_bug() added so that the existence of the erratum can be 
   queried by code at the run time as necessary; useful for generated code 
   like TLB fault and copy/clear page handlers.

5. __udelay() updated as it uses multiplication in inline assembly.

 Note that -mdaddi requires modified toolchain (which has been maintained 
by myself and available from my site for ~4years now -- versions covered 
are GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards).  The -mfix-r4000 
and -mfix-r4400 have been standard for a while though.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:54 +00:00

245 lines
8.0 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle
* Copyright (C) 2007 Maciej W. Rozycki
*/
#ifndef _ASM_WAR_H
#define _ASM_WAR_H
#include <war.h>
/*
* Work around certain R4000 CPU errata (as implemented by GCC):
*
* - A double-word or a variable shift may give an incorrect result
* if executed immediately after starting an integer division:
* "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
* erratum #28
* "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
* #19
*
* - A double-word or a variable shift may give an incorrect result
* if executed while an integer multiplication is in progress:
* "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
* errata #16 & #28
*
* - An integer division may give an incorrect result if started in
* a delay slot of a taken branch or a jump:
* "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
* erratum #52
*/
#ifdef CONFIG_CPU_R4000_WORKAROUNDS
#define R4000_WAR 1
#else
#define R4000_WAR 0
#endif
/*
* Work around certain R4400 CPU errata (as implemented by GCC):
*
* - A double-word or a variable shift may give an incorrect result
* if executed immediately after starting an integer division:
* "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10
* "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4
*/
#ifdef CONFIG_CPU_R4400_WORKAROUNDS
#define R4400_WAR 1
#else
#define R4400_WAR 0
#endif
/*
* Work around the "daddi" and "daddiu" CPU errata:
*
* - The `daddi' instruction fails to trap on overflow.
* "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
* erratum #23
*
* - The `daddiu' instruction can produce an incorrect result.
* "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
* erratum #41
* "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
* #15
* "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7
* "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5
*/
#ifdef CONFIG_CPU_DADDI_WORKAROUNDS
#define DADDI_WAR 1
#else
#define DADDI_WAR 0
#endif
/*
* Another R4600 erratum. Due to the lack of errata information the exact
* technical details aren't known. I've experimentally found that disabling
* interrupts during indexed I-cache flushes seems to be sufficient to deal
* with the issue.
*/
#ifndef R4600_V1_INDEX_ICACHEOP_WAR
#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform
#endif
/*
* Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata:
*
* 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
* Hit_Invalidate_D and Create_Dirty_Excl_D should only be
* executed if there is no other dcache activity. If the dcache is
* accessed for another instruction immeidately preceding when these
* cache instructions are executing, it is possible that the dcache
* tag match outputs used by these cache instructions will be
* incorrect. These cache instructions should be preceded by at least
* four instructions that are not any kind of load or store
* instruction.
*
* This is not allowed: lw
* nop
* nop
* nop
* cache Hit_Writeback_Invalidate_D
*
* This is allowed: lw
* nop
* nop
* nop
* nop
* cache Hit_Writeback_Invalidate_D
*/
#ifndef R4600_V1_HIT_CACHEOP_WAR
#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform
#endif
/*
* Writeback and invalidate the primary cache dcache before DMA.
*
* R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
* Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
* operate correctly if the internal data cache refill buffer is empty. These
* CACHE instructions should be separated from any potential data cache miss
* by a load instruction to an uncached address to empty the response buffer."
* (Revision 2.0 device errata from IDT available on http://www.idt.com/
* in .pdf format.)
*/
#ifndef R4600_V2_HIT_CACHEOP_WAR
#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform
#endif
/*
* When an interrupt happens on a CP0 register read instruction, CPU may
* lock up or read corrupted values of CP0 registers after it enters
* the exception handler.
*
* This workaround makes sure that we read a "safe" CP0 register as the
* first thing in the exception handler, which breaks one of the
* pre-conditions for this problem.
*/
#ifndef R5432_CP0_INTERRUPT_WAR
#error Check setting of R5432_CP0_INTERRUPT_WAR for your platform
#endif
/*
* Workaround for the Sibyte M3 errata the text of which can be found at
*
* http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt
*
* This will enable the use of a special TLB refill handler which does a
* consistency check on the information in c0_badvaddr and c0_entryhi and
* will just return and take the exception again if the information was
* found to be inconsistent.
*/
#ifndef BCM1250_M3_WAR
#error Check setting of BCM1250_M3_WAR for your platform
#endif
/*
* This is a DUART workaround related to glitches around register accesses
*/
#ifndef SIBYTE_1956_WAR
#error Check setting of SIBYTE_1956_WAR for your platform
#endif
/*
* Fill buffers not flushed on CACHE instructions
*
* Hit_Invalidate_I cacheops invalidate an icache line but the refill
* for that line can get stale data from the fill buffer instead of
* accessing memory if the previous icache miss was also to that line.
*
* Workaround: generate an icache refill from a different line
*
* Affects:
* MIPS 4K RTL revision <3.0, PRID revision <4
*/
#ifndef MIPS4K_ICACHE_REFILL_WAR
#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform
#endif
/*
* Missing implicit forced flush of evictions caused by CACHE
* instruction
*
* Evictions caused by a CACHE instructions are not forced on to the
* bus. The BIU gives higher priority to fetches than to the data from
* the eviction buffer and no collision detection is performed between
* fetches and pending data from the eviction buffer.
*
* Workaround: Execute a SYNC instruction after the cache instruction
*
* Affects:
* MIPS 5Kc,5Kf RTL revision <2.3, PRID revision <8
* MIPS 20Kc RTL revision <4.0, PRID revision <?
*/
#ifndef MIPS_CACHE_SYNC_WAR
#error Check setting of MIPS_CACHE_SYNC_WAR for your platform
#endif
/*
* From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
* the line which this instruction itself exists, the following
* operation is not guaranteed."
*
* Workaround: do two phase flushing for Index_Invalidate_I
*/
#ifndef TX49XX_ICACHE_INDEX_INV_WAR
#error Check setting of TX49XX_ICACHE_INDEX_INV_WAR for your platform
#endif
/*
* On the RM9000 there is a problem which makes the CreateDirtyExclusive
* eache operation unusable on SMP systems.
*/
#ifndef RM9000_CDEX_SMP_WAR
#error Check setting of RM9000_CDEX_SMP_WAR for your platform
#endif
/*
* The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
* opposes it being called that) where invalid instructions in the same
* I-cache line worth of instructions being fetched may case spurious
* exceptions.
*/
#ifndef ICACHE_REFILLS_WORKAROUND_WAR
#error Check setting of ICACHE_REFILLS_WORKAROUND_WAR for your platform
#endif
/*
* On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
* may cause ll / sc and lld / scd sequences to execute non-atomically.
*/
#ifndef R10000_LLSC_WAR
#error Check setting of R10000_LLSC_WAR for your platform
#endif
/*
* 34K core erratum: "Problems Executing the TLBR Instruction"
*/
#ifndef MIPS34K_MISSED_ITLB_WAR
#error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform
#endif
#endif /* _ASM_WAR_H */