9bbe076f36
This is a patch which includes support for the GENPIX 8PSK->USB module. The board supports QPSK, BPSK and 8PSK decoding (though I don't think it will be DVB-S2 compliant) With the following patch, the boad is equivalent to a budget card (no CA Module) The patch which adds 8psk suppot will follow, but is seperate, as it requires DVB-S2 support More info on the board can be found at www.genpix-electronics.com (and they host the requisite firmwares there as well) Signed off by: Alan Nisota <alannisota@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
255 lines
6.1 KiB
C
255 lines
6.1 KiB
C
/* DVB USB compliant Linux driver for the
|
|
* - GENPIX 8pks/qpsk USB2.0 DVB-S module
|
|
*
|
|
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
|
|
*
|
|
* Thanks to GENPIX for the sample code used to implement this module.
|
|
*
|
|
* This module is based off the vp7045 and vp702x modules
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, version 2.
|
|
*
|
|
* see Documentation/dvb/README.dvb-usb for more information
|
|
*/
|
|
#include "gp8psk.h"
|
|
|
|
/* debug */
|
|
static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
|
|
int dvb_usb_gp8psk_debug;
|
|
module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
|
|
|
|
int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
|
|
{
|
|
int ret = 0,try = 0;
|
|
|
|
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
|
|
return ret;
|
|
|
|
while (ret >= 0 && ret != blen && try < 3) {
|
|
ret = usb_control_msg(d->udev,
|
|
usb_rcvctrlpipe(d->udev,0),
|
|
req,
|
|
USB_TYPE_VENDOR | USB_DIR_IN,
|
|
value,index,b,blen,
|
|
2000);
|
|
deb_info("reading number %d (ret: %d)\n",try,ret);
|
|
try++;
|
|
}
|
|
|
|
if (ret < 0 || ret != blen) {
|
|
warn("usb in operation failed.");
|
|
ret = -EIO;
|
|
} else
|
|
ret = 0;
|
|
|
|
deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
|
|
debug_dump(b,blen,deb_xfer);
|
|
|
|
mutex_unlock(&d->usb_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
|
|
u16 index, u8 *b, int blen)
|
|
{
|
|
int ret;
|
|
|
|
deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
|
|
debug_dump(b,blen,deb_xfer);
|
|
|
|
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
|
|
return ret;
|
|
|
|
if (usb_control_msg(d->udev,
|
|
usb_sndctrlpipe(d->udev,0),
|
|
req,
|
|
USB_TYPE_VENDOR | USB_DIR_OUT,
|
|
value,index,b,blen,
|
|
2000) != blen) {
|
|
warn("usb out operation failed.");
|
|
ret = -EIO;
|
|
} else
|
|
ret = 0;
|
|
mutex_unlock(&d->usb_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
|
|
{
|
|
int ret;
|
|
const struct firmware *fw = NULL;
|
|
u8 *ptr, *buf;
|
|
if ((ret = request_firmware(&fw, bcm4500_firmware,
|
|
&d->udev->dev)) != 0) {
|
|
err("did not find the bcm4500 firmware file. (%s) "
|
|
"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
|
|
bcm4500_firmware,ret);
|
|
return ret;
|
|
}
|
|
|
|
if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) {
|
|
release_firmware(fw);
|
|
return -EINVAL;
|
|
}
|
|
|
|
info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware);
|
|
|
|
ptr = fw->data;
|
|
buf = (u8 *) kmalloc(512, GFP_KERNEL | GFP_DMA);
|
|
|
|
while (ptr[0] != 0xff) {
|
|
u16 buflen = ptr[0] + 4;
|
|
if (ptr + buflen >= fw->data + fw->size) {
|
|
err("failed to load bcm4500 firmware.");
|
|
release_firmware(fw);
|
|
kfree(buf);
|
|
return -EINVAL;
|
|
}
|
|
memcpy(buf, ptr, buflen);
|
|
if (dvb_usb_generic_write(d, buf, buflen)) {
|
|
err("failed to load bcm4500 firmware.");
|
|
release_firmware(fw);
|
|
kfree(buf);
|
|
return -EIO;
|
|
}
|
|
ptr += buflen;
|
|
}
|
|
release_firmware(fw);
|
|
kfree(buf);
|
|
return 0;
|
|
}
|
|
|
|
static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
u8 status, buf;
|
|
if (onoff) {
|
|
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
|
|
if (! (status & 0x01)) /* started */
|
|
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
|
|
return -EINVAL;
|
|
|
|
if (! (status & 0x02)) /* BCM4500 firmware loaded */
|
|
if(gp8psk_load_bcm4500fw(d))
|
|
return EINVAL;
|
|
|
|
if (! (status & 0x04)) /* LNB Power */
|
|
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
|
|
&buf, 1))
|
|
return EINVAL;
|
|
|
|
/* Set DVB mode */
|
|
if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
|
|
return -EINVAL;
|
|
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
|
|
} else {
|
|
/* Turn off LNB power */
|
|
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
|
|
return EINVAL;
|
|
/* Turn off 8psk power */
|
|
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
|
|
return -EINVAL;
|
|
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int gp8psk_streaming_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
return gp8psk_usb_out_op(d, ARM_TRANSFER, onoff, 0 , NULL, 0);
|
|
}
|
|
|
|
static int gp8psk_frontend_attach(struct dvb_usb_device *d)
|
|
{
|
|
d->fe = gp8psk_fe_attach(d);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_usb_properties gp8psk_properties;
|
|
|
|
static int gp8psk_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL);
|
|
}
|
|
|
|
static struct usb_device_id gp8psk_usb_table [] = {
|
|
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) },
|
|
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) },
|
|
{ 0 },
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
|
|
|
|
static struct dvb_usb_properties gp8psk_properties = {
|
|
.caps = 0,
|
|
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
.firmware = "dvb-usb-gp8psk-01.fw",
|
|
|
|
.streaming_ctrl = gp8psk_streaming_ctrl,
|
|
.power_ctrl = gp8psk_power_ctrl,
|
|
.frontend_attach = gp8psk_frontend_attach,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.urb = {
|
|
.type = DVB_USB_BULK,
|
|
.count = 7,
|
|
.endpoint = 0x82,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
|
|
.num_device_descs = 1,
|
|
.devices = {
|
|
{ .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver",
|
|
.cold_ids = { &gp8psk_usb_table[0], NULL },
|
|
.warm_ids = { &gp8psk_usb_table[1], NULL },
|
|
},
|
|
{ 0 },
|
|
}
|
|
};
|
|
|
|
/* usb specific object needed to register this driver with the usb subsystem */
|
|
static struct usb_driver gp8psk_usb_driver = {
|
|
.name = "dvb_usb_gp8psk",
|
|
.probe = gp8psk_usb_probe,
|
|
.disconnect = dvb_usb_device_exit,
|
|
.id_table = gp8psk_usb_table,
|
|
};
|
|
|
|
/* module stuff */
|
|
static int __init gp8psk_usb_module_init(void)
|
|
{
|
|
int result;
|
|
if ((result = usb_register(&gp8psk_usb_driver))) {
|
|
err("usb_register failed. (%d)",result);
|
|
return result;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit gp8psk_usb_module_exit(void)
|
|
{
|
|
/* deregister this driver from the USB subsystem */
|
|
usb_deregister(&gp8psk_usb_driver);
|
|
}
|
|
|
|
module_init(gp8psk_usb_module_init);
|
|
module_exit(gp8psk_usb_module_exit);
|
|
|
|
MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
|
|
MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0");
|
|
MODULE_VERSION("1.0");
|
|
MODULE_LICENSE("GPL");
|