Jay Lubomirski 2f4d4da8f8 serial: clear proper MPSC interrupt cause bits ... The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the interrupt for both controllers instead of just the one its supposed to. This can result in the other controller appearing to hang because its interrupt was effectively lost. So, don't clear the interrupt cause bits for both MPSC controllers when clearing the interrupt for one of them. Just clear the one that is supposed to be cleared. Signed-off-by: Jay Lubomirski <jaylubo@motorola.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2007-06-28 11:38:29 -07:00
..
cpm_uart	[POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning	2007-05-09 23:44:58 -05:00
jsm	Subject: jsm driver fix for linuxpps support	2007-05-08 11:15:03 -07:00
8250_accent.c
8250_acorn.c	[ARM] ecard: add ecardm_iomap() / ecardm_iounmap()	2007-05-11 17:19:02 +01:00
8250_au1x00.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c
8250_pnp.c	[PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c	2007-03-23 11:01:22 -07:00
8250.c	NS16550A: Restore HS settings in EXCR2 on resume	2007-05-17 05:25:49 -07:00
8250.h
21285.c
68328serial.c
68328serial.h
68360serial.c
amba-pl010.c	[ARM] Fix 4417/1: Serial: Fix AMBA drivers locking	2007-06-05 19:39:49 +01:00
amba-pl011.c	[ARM] 4417/1: Serial: Fix AMBA drivers locking	2007-05-30 14:33:01 +01:00
atmel_serial.c	[ARM] 4357/1: AT91: Support slower serial baud-rates	2007-05-03 14:12:45 +01:00
atmel_serial.h	[ARM] 4357/1: AT91: Support slower serial baud-rates	2007-05-03 14:12:45 +01:00
bfin_5xx.c	Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENB	2007-06-11 16:16:45 +08:00
clps711x.c
crisv10.c
dz.c
dz.h
icom.c	icom: add new sub-device-id to support new adapter	2007-05-17 05:23:05 -07:00
icom.h	do not truncate irq number for icom adapter	2007-04-24 08:23:08 -07:00
imx.c	[ARM] 4328/1: Move i.MX UART regs to driver	2007-05-03 20:24:21 +01:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig	[ARM] 4332/2: KS8695: Serial driver	2007-05-11 22:02:52 +01:00
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile	[ARM] 4332/2: KS8695: Serial driver	2007-05-11 22:02:52 +01:00
mcfserial.c
mcfserial.h
mpc52xx_uart.c	[POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console	2007-05-07 20:31:15 +10:00
mpsc.c	serial: clear proper MPSC interrupt cause bits	2007-06-28 11:38:29 -07:00
mux.c
netx-serial.c
of_serial.c	Merge branch 'linux-2.6'	2007-05-08 13:37:51 +10:00
pmac_zilog.c	[POWERPC] Rename device_is_compatible to of_device_is_compatible	2007-05-07 20:31:14 +10:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX	2007-04-21 23:14:01 +01:00
s3c2410.c	SPIN_LOCK_UNLOCKED cleanup in drivers/serial	2007-05-08 11:15:11 -07:00
sa1100.c
serial_core.c	Serial: serial_core, use pr_debug	2007-05-07 12:12:51 -07:00
serial_cs.c
serial_ks8695.c	[ARM] 4411/1: KS8695: Another serial driver fix	2007-05-30 13:15:19 +01:00
serial_lh7a40x.c
serial_txx9.c	serial_txx9: zap changelog from source code	2007-05-08 11:15:12 -07:00
sh-sci.c	serial: sh-sci: Fix module clock refcount for serial console.	2007-05-07 02:11:56 +00:00
sh-sci.h	sh: MS7712SE01 board support.	2007-05-07 02:10:54 +00:00
sn_console.c
suncore.c	[SPARC]: Linux always started with 9600 8N1	2007-05-29 02:50:07 -07:00
suncore.h
sunhv.c	[SPARC64]: Add hypervisor API negotiation and fix console bugs.	2007-05-15 20:23:02 -07:00
sunsab.c
sunsab.h
sunsu.c	[SERIAL] sunsu: Fix section mismatch warnings.	2007-05-07 00:14:13 -07:00
sunzilog.c	[SERIAL] sunzilog: section mismatch fix	2007-05-29 02:49:17 -07:00
sunzilog.h	[SERIAL] sunzilog: Interrupt enable before ISR handler installed	2007-05-09 13:49:04 -07:00
uartlite.c
v850e_uart.c
vr41xx_siu.c