56d417b12e
Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
73 lines
1.8 KiB
Plaintext
73 lines
1.8 KiB
Plaintext
|
|
Options for the ipv6 module are supplied as parameters at load time.
|
|
|
|
Module options may be given as command line arguments to the insmod
|
|
or modprobe command, but are usually specified in either the
|
|
/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
|
|
distro-specific configuration file.
|
|
|
|
The available ipv6 module parameters are listed below. If a parameter
|
|
is not specified the default value is used.
|
|
|
|
The parameters are as follows:
|
|
|
|
disable
|
|
|
|
Specifies whether to load the IPv6 module, but disable all
|
|
its functionality. This might be used when another module
|
|
has a dependency on the IPv6 module being loaded, but no
|
|
IPv6 addresses or operations are desired.
|
|
|
|
The possible values and their effects are:
|
|
|
|
0
|
|
IPv6 is enabled.
|
|
|
|
This is the default value.
|
|
|
|
1
|
|
IPv6 is disabled.
|
|
|
|
No IPv6 addresses will be added to interfaces, and
|
|
it will not be possible to open an IPv6 socket.
|
|
|
|
A reboot is required to enable IPv6.
|
|
|
|
autoconf
|
|
|
|
Specifies whether to enable IPv6 address autoconfiguration
|
|
on all interfaces. This might be used when one does not wish
|
|
for addresses to be automatically generated from prefixes
|
|
received in Router Advertisements.
|
|
|
|
The possible values and their effects are:
|
|
|
|
0
|
|
IPv6 address autoconfiguration is disabled on all interfaces.
|
|
|
|
Only the IPv6 loopback address (::1) and link-local addresses
|
|
will be added to interfaces.
|
|
|
|
1
|
|
IPv6 address autoconfiguration is enabled on all interfaces.
|
|
|
|
This is the default value.
|
|
|
|
disable_ipv6
|
|
|
|
Specifies whether to disable IPv6 on all interfaces.
|
|
This might be used when no IPv6 addresses are desired.
|
|
|
|
The possible values and their effects are:
|
|
|
|
0
|
|
IPv6 is enabled on all interfaces.
|
|
|
|
This is the default value.
|
|
|
|
1
|
|
IPv6 is disabled on all interfaces.
|
|
|
|
No IPv6 addresses will be added to interfaces.
|
|
|