android_kernel_xiaomi_sm8350/drivers/lguest/core.c
Rusty Russell 0d027c01cd lguest: Fix Malicious Guest GDT Host Crash
If a Guest makes hypercall which sets a GDT entry to not present, we
currently set any segment registers using that GDT entry to 0.
Unfortunately, this is not sufficient: there are other ways of
altering GDT entries which will cause a fault.

The correct solution to do what Linux does: let them set any GDT value
they want and handle the #GP when popping causes a fault.  This has
the added benefit of making our Switcher slightly more robust in the
case of any other bugs which cause it to fault.

We kill the Guest if it causes a fault in the Switcher: it's the
Guest's responsibility to make sure it's not using segments when it
changes them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-09 08:14:56 -07:00

777 lines
27 KiB
C

/*P:400 This contains run_guest() which actually calls into the Host<->Guest
* Switcher and analyzes the return, such as determining if the Guest wants the
* Host to do something. This file also contains useful helper routines, and a
* couple of non-obvious setup and teardown pieces which were implemented after
* days of debugging pain. :*/
#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/stddef.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
#include <asm/paravirt.h>
#include <asm/desc.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
#include <asm/poll.h>
#include <asm/highmem.h>
#include <asm/asm-offsets.h>
#include <asm/i387.h>
#include "lg.h"
/* Found in switcher.S */
extern char start_switcher_text[], end_switcher_text[], switch_to_guest[];
extern unsigned long default_idt_entries[];
/* Every guest maps the core switcher code. */
#define SHARED_SWITCHER_PAGES \
DIV_ROUND_UP(end_switcher_text - start_switcher_text, PAGE_SIZE)
/* Pages for switcher itself, then two pages per cpu */
#define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * NR_CPUS)
/* We map at -4M for ease of mapping into the guest (one PTE page). */
#define SWITCHER_ADDR 0xFFC00000
static struct vm_struct *switcher_vma;
static struct page **switcher_page;
static int cpu_had_pge;
static struct {
unsigned long offset;
unsigned short segment;
} lguest_entry;
/* This One Big lock protects all inter-guest data structures. */
DEFINE_MUTEX(lguest_lock);
static DEFINE_PER_CPU(struct lguest *, last_guest);
/* FIXME: Make dynamic. */
#define MAX_LGUEST_GUESTS 16
struct lguest lguests[MAX_LGUEST_GUESTS];
/* Offset from where switcher.S was compiled to where we've copied it */
static unsigned long switcher_offset(void)
{
return SWITCHER_ADDR - (unsigned long)start_switcher_text;
}
/* This cpu's struct lguest_pages. */
static struct lguest_pages *lguest_pages(unsigned int cpu)
{
return &(((struct lguest_pages *)
(SWITCHER_ADDR + SHARED_SWITCHER_PAGES*PAGE_SIZE))[cpu]);
}
/*H:010 We need to set up the Switcher at a high virtual address. Remember the
* Switcher is a few hundred bytes of assembler code which actually changes the
* CPU to run the Guest, and then changes back to the Host when a trap or
* interrupt happens.
*
* The Switcher code must be at the same virtual address in the Guest as the
* Host since it will be running as the switchover occurs.
*
* Trying to map memory at a particular address is an unusual thing to do, so
* it's not a simple one-liner. We also set up the per-cpu parts of the
* Switcher here.
*/
static __init int map_switcher(void)
{
int i, err;
struct page **pagep;
/*
* Map the Switcher in to high memory.
*
* It turns out that if we choose the address 0xFFC00000 (4MB under the
* top virtual address), it makes setting up the page tables really
* easy.
*/
/* We allocate an array of "struct page"s. map_vm_area() wants the
* pages in this form, rather than just an array of pointers. */
switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
GFP_KERNEL);
if (!switcher_page) {
err = -ENOMEM;
goto out;
}
/* Now we actually allocate the pages. The Guest will see these pages,
* so we make sure they're zeroed. */
for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) {
unsigned long addr = get_zeroed_page(GFP_KERNEL);
if (!addr) {
err = -ENOMEM;
goto free_some_pages;
}
switcher_page[i] = virt_to_page(addr);
}
/* Now we reserve the "virtual memory area" we want: 0xFFC00000
* (SWITCHER_ADDR). We might not get it in theory, but in practice
* it's worked so far. */
switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
VM_ALLOC, SWITCHER_ADDR, VMALLOC_END);
if (!switcher_vma) {
err = -ENOMEM;
printk("lguest: could not map switcher pages high\n");
goto free_pages;
}
/* This code actually sets up the pages we've allocated to appear at
* SWITCHER_ADDR. map_vm_area() takes the vma we allocated above, the
* kind of pages we're mapping (kernel pages), and a pointer to our
* array of struct pages. It increments that pointer, but we don't
* care. */
pagep = switcher_page;
err = map_vm_area(switcher_vma, PAGE_KERNEL, &pagep);
if (err) {
printk("lguest: map_vm_area failed: %i\n", err);
goto free_vma;
}
/* Now the switcher is mapped at the right address, we can't fail!
* Copy in the compiled-in Switcher code (from switcher.S). */
memcpy(switcher_vma->addr, start_switcher_text,
end_switcher_text - start_switcher_text);
/* Most of the switcher.S doesn't care that it's been moved; on Intel,
* jumps are relative, and it doesn't access any references to external
* code or data.
*
* The only exception is the interrupt handlers in switcher.S: their
* addresses are placed in a table (default_idt_entries), so we need to
* update the table with the new addresses. switcher_offset() is a
* convenience function which returns the distance between the builtin
* switcher code and the high-mapped copy we just made. */
for (i = 0; i < IDT_ENTRIES; i++)
default_idt_entries[i] += switcher_offset();
/*
* Set up the Switcher's per-cpu areas.
*
* Each CPU gets two pages of its own within the high-mapped region
* (aka. "struct lguest_pages"). Much of this can be initialized now,
* but some depends on what Guest we are running (which is set up in
* copy_in_guest_info()).
*/
for_each_possible_cpu(i) {
/* lguest_pages() returns this CPU's two pages. */
struct lguest_pages *pages = lguest_pages(i);
/* This is a convenience pointer to make the code fit one
* statement to a line. */
struct lguest_ro_state *state = &pages->state;
/* The Global Descriptor Table: the Host has a different one
* for each CPU. We keep a descriptor for the GDT which says
* where it is and how big it is (the size is actually the last
* byte, not the size, hence the "-1"). */
state->host_gdt_desc.size = GDT_SIZE-1;
state->host_gdt_desc.address = (long)get_cpu_gdt_table(i);
/* All CPUs on the Host use the same Interrupt Descriptor
* Table, so we just use store_idt(), which gets this CPU's IDT
* descriptor. */
store_idt(&state->host_idt_desc);
/* The descriptors for the Guest's GDT and IDT can be filled
* out now, too. We copy the GDT & IDT into ->guest_gdt and
* ->guest_idt before actually running the Guest. */
state->guest_idt_desc.size = sizeof(state->guest_idt)-1;
state->guest_idt_desc.address = (long)&state->guest_idt;
state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1;
state->guest_gdt_desc.address = (long)&state->guest_gdt;
/* We know where we want the stack to be when the Guest enters
* the switcher: in pages->regs. The stack grows upwards, so
* we start it at the end of that structure. */
state->guest_tss.esp0 = (long)(&pages->regs + 1);
/* And this is the GDT entry to use for the stack: we keep a
* couple of special LGUEST entries. */
state->guest_tss.ss0 = LGUEST_DS;
/* x86 can have a finegrained bitmap which indicates what I/O
* ports the process can use. We set it to the end of our
* structure, meaning "none". */
state->guest_tss.io_bitmap_base = sizeof(state->guest_tss);
/* Some GDT entries are the same across all Guests, so we can
* set them up now. */
setup_default_gdt_entries(state);
/* Most IDT entries are the same for all Guests, too.*/
setup_default_idt_entries(state, default_idt_entries);
/* The Host needs to be able to use the LGUEST segments on this
* CPU, too, so put them in the Host GDT. */
get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
}
/* In the Switcher, we want the %cs segment register to use the
* LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so
* it will be undisturbed when we switch. To change %cs and jump we
* need this structure to feed to Intel's "lcall" instruction. */
lguest_entry.offset = (long)switch_to_guest + switcher_offset();
lguest_entry.segment = LGUEST_CS;
printk(KERN_INFO "lguest: mapped switcher at %p\n",
switcher_vma->addr);
/* And we succeeded... */
return 0;
free_vma:
vunmap(switcher_vma->addr);
free_pages:
i = TOTAL_SWITCHER_PAGES;
free_some_pages:
for (--i; i >= 0; i--)
__free_pages(switcher_page[i], 0);
kfree(switcher_page);
out:
return err;
}
/*:*/
/* Cleaning up the mapping when the module is unloaded is almost...
* too easy. */
static void unmap_switcher(void)
{
unsigned int i;
/* vunmap() undoes *both* map_vm_area() and __get_vm_area(). */
vunmap(switcher_vma->addr);
/* Now we just need to free the pages we copied the switcher into */
for (i = 0; i < TOTAL_SWITCHER_PAGES; i++)
__free_pages(switcher_page[i], 0);
}
/*H:130 Our Guest is usually so well behaved; it never tries to do things it
* isn't allowed to. Unfortunately, "struct paravirt_ops" isn't quite
* complete, because it doesn't contain replacements for the Intel I/O
* instructions. As a result, the Guest sometimes fumbles across one during
* the boot process as it probes for various things which are usually attached
* to a PC.
*
* When the Guest uses one of these instructions, we get trap #13 (General
* Protection Fault) and come here. We see if it's one of those troublesome
* instructions and skip over it. We return true if we did. */
static int emulate_insn(struct lguest *lg)
{
u8 insn;
unsigned int insnlen = 0, in = 0, shift = 0;
/* The eip contains the *virtual* address of the Guest's instruction:
* guest_pa just subtracts the Guest's page_offset. */
unsigned long physaddr = guest_pa(lg, lg->regs->eip);
/* The guest_pa() function only works for Guest kernel addresses, but
* that's all we're trying to do anyway. */
if (lg->regs->eip < lg->page_offset)
return 0;
/* Decoding x86 instructions is icky. */
lgread(lg, &insn, physaddr, 1);
/* 0x66 is an "operand prefix". It means it's using the upper 16 bits
of the eax register. */
if (insn == 0x66) {
shift = 16;
/* The instruction is 1 byte so far, read the next byte. */
insnlen = 1;
lgread(lg, &insn, physaddr + insnlen, 1);
}
/* We can ignore the lower bit for the moment and decode the 4 opcodes
* we need to emulate. */
switch (insn & 0xFE) {
case 0xE4: /* in <next byte>,%al */
insnlen += 2;
in = 1;
break;
case 0xEC: /* in (%dx),%al */
insnlen += 1;
in = 1;
break;
case 0xE6: /* out %al,<next byte> */
insnlen += 2;
break;
case 0xEE: /* out %al,(%dx) */
insnlen += 1;
break;
default:
/* OK, we don't know what this is, can't emulate. */
return 0;
}
/* If it was an "IN" instruction, they expect the result to be read
* into %eax, so we change %eax. We always return all-ones, which
* traditionally means "there's nothing there". */
if (in) {
/* Lower bit tells is whether it's a 16 or 32 bit access */
if (insn & 0x1)
lg->regs->eax = 0xFFFFFFFF;
else
lg->regs->eax |= (0xFFFF << shift);
}
/* Finally, we've "done" the instruction, so move past it. */
lg->regs->eip += insnlen;
/* Success! */
return 1;
}
/*:*/
/*L:305
* Dealing With Guest Memory.
*
* When the Guest gives us (what it thinks is) a physical address, we can use
* the normal copy_from_user() & copy_to_user() on that address: remember,
* Guest physical == Launcher virtual.
*
* But we can't trust the Guest: it might be trying to access the Launcher
* code. We have to check that the range is below the pfn_limit the Launcher
* gave us. We have to make sure that addr + len doesn't give us a false
* positive by overflowing, too. */
int lguest_address_ok(const struct lguest *lg,
unsigned long addr, unsigned long len)
{
return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr);
}
/* This is a convenient routine to get a 32-bit value from the Guest (a very
* common operation). Here we can see how useful the kill_lguest() routine we
* met in the Launcher can be: we return a random value (0) instead of needing
* to return an error. */
u32 lgread_u32(struct lguest *lg, unsigned long addr)
{
u32 val = 0;
/* Don't let them access lguest binary. */
if (!lguest_address_ok(lg, addr, sizeof(val))
|| get_user(val, (u32 __user *)addr) != 0)
kill_guest(lg, "bad read address %#lx", addr);
return val;
}
/* Same thing for writing a value. */
void lgwrite_u32(struct lguest *lg, unsigned long addr, u32 val)
{
if (!lguest_address_ok(lg, addr, sizeof(val))
|| put_user(val, (u32 __user *)addr) != 0)
kill_guest(lg, "bad write address %#lx", addr);
}
/* This routine is more generic, and copies a range of Guest bytes into a
* buffer. If the copy_from_user() fails, we fill the buffer with zeroes, so
* the caller doesn't end up using uninitialized kernel memory. */
void lgread(struct lguest *lg, void *b, unsigned long addr, unsigned bytes)
{
if (!lguest_address_ok(lg, addr, bytes)
|| copy_from_user(b, (void __user *)addr, bytes) != 0) {
/* copy_from_user should do this, but as we rely on it... */
memset(b, 0, bytes);
kill_guest(lg, "bad read address %#lx len %u", addr, bytes);
}
}
/* Similarly, our generic routine to copy into a range of Guest bytes. */
void lgwrite(struct lguest *lg, unsigned long addr, const void *b,
unsigned bytes)
{
if (!lguest_address_ok(lg, addr, bytes)
|| copy_to_user((void __user *)addr, b, bytes) != 0)
kill_guest(lg, "bad write address %#lx len %u", addr, bytes);
}
/* (end of memory access helper routines) :*/
static void set_ts(void)
{
u32 cr0;
cr0 = read_cr0();
if (!(cr0 & 8))
write_cr0(cr0|8);
}
/*S:010
* We are getting close to the Switcher.
*
* Remember that each CPU has two pages which are visible to the Guest when it
* runs on that CPU. This has to contain the state for that Guest: we copy the
* state in just before we run the Guest.
*
* Each Guest has "changed" flags which indicate what has changed in the Guest
* since it last ran. We saw this set in interrupts_and_traps.c and
* segments.c.
*/
static void copy_in_guest_info(struct lguest *lg, struct lguest_pages *pages)
{
/* Copying all this data can be quite expensive. We usually run the
* same Guest we ran last time (and that Guest hasn't run anywhere else
* meanwhile). If that's not the case, we pretend everything in the
* Guest has changed. */
if (__get_cpu_var(last_guest) != lg || lg->last_pages != pages) {
__get_cpu_var(last_guest) = lg;
lg->last_pages = pages;
lg->changed = CHANGED_ALL;
}
/* These copies are pretty cheap, so we do them unconditionally: */
/* Save the current Host top-level page directory. */
pages->state.host_cr3 = __pa(current->mm->pgd);
/* Set up the Guest's page tables to see this CPU's pages (and no
* other CPU's pages). */
map_switcher_in_guest(lg, pages);
/* Set up the two "TSS" members which tell the CPU what stack to use
* for traps which do directly into the Guest (ie. traps at privilege
* level 1). */
pages->state.guest_tss.esp1 = lg->esp1;
pages->state.guest_tss.ss1 = lg->ss1;
/* Copy direct-to-Guest trap entries. */
if (lg->changed & CHANGED_IDT)
copy_traps(lg, pages->state.guest_idt, default_idt_entries);
/* Copy all GDT entries which the Guest can change. */
if (lg->changed & CHANGED_GDT)
copy_gdt(lg, pages->state.guest_gdt);
/* If only the TLS entries have changed, copy them. */
else if (lg->changed & CHANGED_GDT_TLS)
copy_gdt_tls(lg, pages->state.guest_gdt);
/* Mark the Guest as unchanged for next time. */
lg->changed = 0;
}
/* Finally: the code to actually call into the Switcher to run the Guest. */
static void run_guest_once(struct lguest *lg, struct lguest_pages *pages)
{
/* This is a dummy value we need for GCC's sake. */
unsigned int clobber;
/* Copy the guest-specific information into this CPU's "struct
* lguest_pages". */
copy_in_guest_info(lg, pages);
/* Set the trap number to 256 (impossible value). If we fault while
* switching to the Guest (bad segment registers or bug), this will
* cause us to abort the Guest. */
lg->regs->trapnum = 256;
/* Now: we push the "eflags" register on the stack, then do an "lcall".
* This is how we change from using the kernel code segment to using
* the dedicated lguest code segment, as well as jumping into the
* Switcher.
*
* The lcall also pushes the old code segment (KERNEL_CS) onto the
* stack, then the address of this call. This stack layout happens to
* exactly match the stack of an interrupt... */
asm volatile("pushf; lcall *lguest_entry"
/* This is how we tell GCC that %eax ("a") and %ebx ("b")
* are changed by this routine. The "=" means output. */
: "=a"(clobber), "=b"(clobber)
/* %eax contains the pages pointer. ("0" refers to the
* 0-th argument above, ie "a"). %ebx contains the
* physical address of the Guest's top-level page
* directory. */
: "0"(pages), "1"(__pa(lg->pgdirs[lg->pgdidx].pgdir))
/* We tell gcc that all these registers could change,
* which means we don't have to save and restore them in
* the Switcher. */
: "memory", "%edx", "%ecx", "%edi", "%esi");
}
/*:*/
/*H:030 Let's jump straight to the the main loop which runs the Guest.
* Remember, this is called by the Launcher reading /dev/lguest, and we keep
* going around and around until something interesting happens. */
int run_guest(struct lguest *lg, unsigned long __user *user)
{
/* We stop running once the Guest is dead. */
while (!lg->dead) {
/* We need to initialize this, otherwise gcc complains. It's
* not (yet) clever enough to see that it's initialized when we
* need it. */
unsigned int cr2 = 0; /* Damn gcc */
/* First we run any hypercalls the Guest wants done: either in
* the hypercall ring in "struct lguest_data", or directly by
* using int 31 (LGUEST_TRAP_ENTRY). */
do_hypercalls(lg);
/* It's possible the Guest did a SEND_DMA hypercall to the
* Launcher, in which case we return from the read() now. */
if (lg->dma_is_pending) {
if (put_user(lg->pending_dma, user) ||
put_user(lg->pending_key, user+1))
return -EFAULT;
return sizeof(unsigned long)*2;
}
/* Check for signals */
if (signal_pending(current))
return -ERESTARTSYS;
/* If Waker set break_out, return to Launcher. */
if (lg->break_out)
return -EAGAIN;
/* Check if there are any interrupts which can be delivered
* now: if so, this sets up the hander to be executed when we
* next run the Guest. */
maybe_do_interrupt(lg);
/* All long-lived kernel loops need to check with this horrible
* thing called the freezer. If the Host is trying to suspend,
* it stops us. */
try_to_freeze();
/* Just make absolutely sure the Guest is still alive. One of
* those hypercalls could have been fatal, for example. */
if (lg->dead)
break;
/* If the Guest asked to be stopped, we sleep. The Guest's
* clock timer or LHCALL_BREAK from the Waker will wake us. */
if (lg->halted) {
set_current_state(TASK_INTERRUPTIBLE);
schedule();
continue;
}
/* OK, now we're ready to jump into the Guest. First we put up
* the "Do Not Disturb" sign: */
local_irq_disable();
/* Remember the awfully-named TS bit? If the Guest has asked
* to set it we set it now, so we can trap and pass that trap
* to the Guest if it uses the FPU. */
if (lg->ts)
set_ts();
/* SYSENTER is an optimized way of doing system calls. We
* can't allow it because it always jumps to privilege level 0.
* A normal Guest won't try it because we don't advertise it in
* CPUID, but a malicious Guest (or malicious Guest userspace
* program) could, so we tell the CPU to disable it before
* running the Guest. */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
/* Now we actually run the Guest. It will pop back out when
* something interesting happens, and we can examine its
* registers to see what it was doing. */
run_guest_once(lg, lguest_pages(raw_smp_processor_id()));
/* The "regs" pointer contains two extra entries which are not
* really registers: a trap number which says what interrupt or
* trap made the switcher code come back, and an error code
* which some traps set. */
/* If the Guest page faulted, then the cr2 register will tell
* us the bad virtual address. We have to grab this now,
* because once we re-enable interrupts an interrupt could
* fault and thus overwrite cr2, or we could even move off to a
* different CPU. */
if (lg->regs->trapnum == 14)
cr2 = read_cr2();
/* Similarly, if we took a trap because the Guest used the FPU,
* we have to restore the FPU it expects to see. */
else if (lg->regs->trapnum == 7)
math_state_restore();
/* Restore SYSENTER if it's supposed to be on. */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
/* Now we're ready to be interrupted or moved to other CPUs */
local_irq_enable();
/* OK, so what happened? */
switch (lg->regs->trapnum) {
case 13: /* We've intercepted a GPF. */
/* Check if this was one of those annoying IN or OUT
* instructions which we need to emulate. If so, we
* just go back into the Guest after we've done it. */
if (lg->regs->errcode == 0) {
if (emulate_insn(lg))
continue;
}
break;
case 14: /* We've intercepted a page fault. */
/* The Guest accessed a virtual address that wasn't
* mapped. This happens a lot: we don't actually set
* up most of the page tables for the Guest at all when
* we start: as it runs it asks for more and more, and
* we set them up as required. In this case, we don't
* even tell the Guest that the fault happened.
*
* The errcode tells whether this was a read or a
* write, and whether kernel or userspace code. */
if (demand_page(lg, cr2, lg->regs->errcode))
continue;
/* OK, it's really not there (or not OK): the Guest
* needs to know. We write out the cr2 value so it
* knows where the fault occurred.
*
* Note that if the Guest were really messed up, this
* could happen before it's done the INITIALIZE
* hypercall, so lg->lguest_data will be NULL, so
* &lg->lguest_data->cr2 will be address 8. Writing
* into that address won't hurt the Host at all,
* though. */
if (put_user(cr2, &lg->lguest_data->cr2))
kill_guest(lg, "Writing cr2");
break;
case 7: /* We've intercepted a Device Not Available fault. */
/* If the Guest doesn't want to know, we already
* restored the Floating Point Unit, so we just
* continue without telling it. */
if (!lg->ts)
continue;
break;
case 32 ... 255:
/* These values mean a real interrupt occurred, in
* which case the Host handler has already been run.
* We just do a friendly check if another process
* should now be run, then fall through to loop
* around: */
cond_resched();
case LGUEST_TRAP_ENTRY: /* Handled at top of loop */
continue;
}
/* If we get here, it's a trap the Guest wants to know
* about. */
if (deliver_trap(lg, lg->regs->trapnum))
continue;
/* If the Guest doesn't have a handler (either it hasn't
* registered any yet, or it's one of the faults we don't let
* it handle), it dies with a cryptic error message. */
kill_guest(lg, "unhandled trap %li at %#lx (%#lx)",
lg->regs->trapnum, lg->regs->eip,
lg->regs->trapnum == 14 ? cr2 : lg->regs->errcode);
}
/* The Guest is dead => "No such file or directory" */
return -ENOENT;
}
/* Now we can look at each of the routines this calls, in increasing order of
* complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(),
* deliver_trap() and demand_page(). After all those, we'll be ready to
* examine the Switcher, and our philosophical understanding of the Host/Guest
* duality will be complete. :*/
int find_free_guest(void)
{
unsigned int i;
for (i = 0; i < MAX_LGUEST_GUESTS; i++)
if (!lguests[i].tsk)
return i;
return -1;
}
static void adjust_pge(void *on)
{
if (on)
write_cr4(read_cr4() | X86_CR4_PGE);
else
write_cr4(read_cr4() & ~X86_CR4_PGE);
}
/*H:000
* Welcome to the Host!
*
* By this point your brain has been tickled by the Guest code and numbed by
* the Launcher code; prepare for it to be stretched by the Host code. This is
* the heart. Let's begin at the initialization routine for the Host's lg
* module.
*/
static int __init init(void)
{
int err;
/* Lguest can't run under Xen, VMI or itself. It does Tricky Stuff. */
if (paravirt_enabled()) {
printk("lguest is afraid of %s\n", paravirt_ops.name);
return -EPERM;
}
/* First we put the Switcher up in very high virtual memory. */
err = map_switcher();
if (err)
return err;
/* Now we set up the pagetable implementation for the Guests. */
err = init_pagetables(switcher_page, SHARED_SWITCHER_PAGES);
if (err) {
unmap_switcher();
return err;
}
/* The I/O subsystem needs some things initialized. */
lguest_io_init();
/* /dev/lguest needs to be registered. */
err = lguest_device_init();
if (err) {
free_pagetables();
unmap_switcher();
return err;
}
/* Finally, we need to turn off "Page Global Enable". PGE is an
* optimization where page table entries are specially marked to show
* they never change. The Host kernel marks all the kernel pages this
* way because it's always present, even when userspace is running.
*
* Lguest breaks this: unbeknownst to the rest of the Host kernel, we
* switch to the Guest kernel. If you don't disable this on all CPUs,
* you'll get really weird bugs that you'll chase for two days.
*
* I used to turn PGE off every time we switched to the Guest and back
* on when we return, but that slowed the Switcher down noticibly. */
/* We don't need the complexity of CPUs coming and going while we're
* doing this. */
lock_cpu_hotplug();
if (cpu_has_pge) { /* We have a broader idea of "global". */
/* Remember that this was originally set (for cleanup). */
cpu_had_pge = 1;
/* adjust_pge is a helper function which sets or unsets the PGE
* bit on its CPU, depending on the argument (0 == unset). */
on_each_cpu(adjust_pge, (void *)0, 0, 1);
/* Turn off the feature in the global feature set. */
clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
}
unlock_cpu_hotplug();
/* All good! */
return 0;
}
/* Cleaning up is just the same code, backwards. With a little French. */
static void __exit fini(void)
{
lguest_device_remove();
free_pagetables();
unmap_switcher();
/* If we had PGE before we started, turn it back on now. */
lock_cpu_hotplug();
if (cpu_had_pge) {
set_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
/* adjust_pge's argument "1" means set PGE. */
on_each_cpu(adjust_pge, (void *)1, 0, 1);
}
unlock_cpu_hotplug();
}
/* The Host side of lguest can be a module. This is a nice way for people to
* play with it. */
module_init(init);
module_exit(fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Rusty Russell <rusty@rustcorp.com.au>");