9f693d7b14
Patch from Ben Dooks Do not export items that are not needed by symbol name elsewhere Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
272 lines
6.4 KiB
C
272 lines
6.4 KiB
C
/* linux/arch/arm/mach-s3c2410/mach-anubis.c
|
|
*
|
|
* Copyright (c) 2003-2005 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Modifications:
|
|
* 02-May-2005 BJD Copied from mach-bast.c
|
|
* 20-Sep-2005 BJD Added static to non-exported items
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/arch/anubis-map.h>
|
|
#include <asm/arch/anubis-irq.h>
|
|
#include <asm/arch/anubis-cpld.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/arch/regs-serial.h>
|
|
#include <asm/arch/regs-gpio.h>
|
|
#include <asm/arch/regs-mem.h>
|
|
#include <asm/arch/regs-lcd.h>
|
|
#include <asm/arch/nand.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/nand_ecc.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include "clock.h"
|
|
#include "devs.h"
|
|
#include "cpu.h"
|
|
|
|
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
|
|
|
|
static struct map_desc anubis_iodesc[] __initdata = {
|
|
/* ISA IO areas */
|
|
|
|
{ (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE },
|
|
{ (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE },
|
|
|
|
/* we could possibly compress the next set down into a set of smaller tables
|
|
* pagetables, but that would mean using an L2 section, and it still means
|
|
* we cannot actually feed the same register to an LDR due to 16K spacing
|
|
*/
|
|
|
|
/* CPLD control registers */
|
|
|
|
{ (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE },
|
|
{ (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE },
|
|
|
|
/* IDE drives */
|
|
|
|
{ (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE },
|
|
{ (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE },
|
|
|
|
{ (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE },
|
|
{ (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE },
|
|
};
|
|
|
|
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
|
|
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
|
|
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
|
|
|
|
static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
|
|
[0] = {
|
|
.name = "uclk",
|
|
.divisor = 1,
|
|
.min_baud = 0,
|
|
.max_baud = 0,
|
|
},
|
|
[1] = {
|
|
.name = "pclk",
|
|
.divisor = 1,
|
|
.min_baud = 0,
|
|
.max_baud = 0.
|
|
}
|
|
};
|
|
|
|
|
|
static struct s3c2410_uartcfg anubis_uartcfgs[] = {
|
|
[0] = {
|
|
.hwport = 0,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = anubis_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(anubis_serial_clocks)
|
|
},
|
|
[1] = {
|
|
.hwport = 2,
|
|
.flags = 0,
|
|
.ucon = UCON,
|
|
.ulcon = ULCON,
|
|
.ufcon = UFCON,
|
|
.clocks = anubis_serial_clocks,
|
|
.clocks_size = ARRAY_SIZE(anubis_serial_clocks)
|
|
},
|
|
};
|
|
|
|
/* NAND Flash on Anubis board */
|
|
|
|
static int external_map[] = { 2 };
|
|
static int chip0_map[] = { 0 };
|
|
static int chip1_map[] = { 1 };
|
|
|
|
static struct mtd_partition anubis_default_nand_part[] = {
|
|
[0] = {
|
|
.name = "Boot Agent",
|
|
.size = SZ_16K,
|
|
.offset = 0
|
|
},
|
|
[1] = {
|
|
.name = "/boot",
|
|
.size = SZ_4M - SZ_16K,
|
|
.offset = SZ_16K,
|
|
},
|
|
[2] = {
|
|
.name = "user1",
|
|
.offset = SZ_4M,
|
|
.size = SZ_32M - SZ_4M,
|
|
},
|
|
[3] = {
|
|
.name = "user2",
|
|
.offset = SZ_32M,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
/* the Anubis has 3 selectable slots for nand-flash, the two
|
|
* on-board chip areas, as well as the external slot.
|
|
*
|
|
* Note, there is no current hot-plug support for the External
|
|
* socket.
|
|
*/
|
|
|
|
static struct s3c2410_nand_set anubis_nand_sets[] = {
|
|
[1] = {
|
|
.name = "External",
|
|
.nr_chips = 1,
|
|
.nr_map = external_map,
|
|
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
|
|
.partitions = anubis_default_nand_part
|
|
},
|
|
[0] = {
|
|
.name = "chip0",
|
|
.nr_chips = 1,
|
|
.nr_map = chip0_map,
|
|
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
|
|
.partitions = anubis_default_nand_part
|
|
},
|
|
[2] = {
|
|
.name = "chip1",
|
|
.nr_chips = 1,
|
|
.nr_map = chip1_map,
|
|
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
|
|
.partitions = anubis_default_nand_part
|
|
},
|
|
};
|
|
|
|
static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
slot = set->nr_map[slot] & 3;
|
|
|
|
pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
|
|
slot, set, set->nr_map);
|
|
|
|
tmp = __raw_readb(ANUBIS_VA_CTRL1);
|
|
tmp &= ~ANUBIS_CTRL1_NANDSEL;
|
|
tmp |= slot;
|
|
|
|
pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
|
|
|
|
__raw_writeb(tmp, ANUBIS_VA_CTRL1);
|
|
}
|
|
|
|
static struct s3c2410_platform_nand anubis_nand_info = {
|
|
.tacls = 25,
|
|
.twrph0 = 80,
|
|
.twrph1 = 80,
|
|
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
|
|
.sets = anubis_nand_sets,
|
|
.select_chip = anubis_nand_select,
|
|
};
|
|
|
|
|
|
/* Standard Anubis devices */
|
|
|
|
static struct platform_device *anubis_devices[] __initdata = {
|
|
&s3c_device_usb,
|
|
&s3c_device_wdt,
|
|
&s3c_device_adc,
|
|
&s3c_device_i2c,
|
|
&s3c_device_rtc,
|
|
&s3c_device_nand,
|
|
};
|
|
|
|
static struct clk *anubis_clocks[] = {
|
|
&s3c24xx_dclk0,
|
|
&s3c24xx_dclk1,
|
|
&s3c24xx_clkout0,
|
|
&s3c24xx_clkout1,
|
|
&s3c24xx_uclk,
|
|
};
|
|
|
|
static struct s3c24xx_board anubis_board __initdata = {
|
|
.devices = anubis_devices,
|
|
.devices_count = ARRAY_SIZE(anubis_devices),
|
|
.clocks = anubis_clocks,
|
|
.clocks_count = ARRAY_SIZE(anubis_clocks)
|
|
};
|
|
|
|
static void __init anubis_map_io(void)
|
|
{
|
|
/* initialise the clocks */
|
|
|
|
s3c24xx_dclk0.parent = NULL;
|
|
s3c24xx_dclk0.rate = 12*1000*1000;
|
|
|
|
s3c24xx_dclk1.parent = NULL;
|
|
s3c24xx_dclk1.rate = 24*1000*1000;
|
|
|
|
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
|
|
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
|
|
|
|
s3c24xx_uclk.parent = &s3c24xx_clkout1;
|
|
|
|
s3c_device_nand.dev.platform_data = &anubis_nand_info;
|
|
|
|
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
|
|
s3c24xx_init_clocks(0);
|
|
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
|
|
s3c24xx_set_board(&anubis_board);
|
|
|
|
/* ensure that the GPIO is setup */
|
|
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
|
|
}
|
|
|
|
MACHINE_START(ANUBIS, "Simtec-Anubis")
|
|
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
|
|
.phys_ram = S3C2410_SDRAM_PA,
|
|
.phys_io = S3C2410_PA_UART,
|
|
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
|
|
.boot_params = S3C2410_SDRAM_PA + 0x100,
|
|
.map_io = anubis_map_io,
|
|
.init_irq = s3c24xx_init_irq,
|
|
.timer = &s3c24xx_timer,
|
|
MACHINE_END
|