1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
185 lines
4.4 KiB
C
185 lines
4.4 KiB
C
/*
|
|
* i2c-pca-isa.c driver for PCA9564 on ISA boards
|
|
* Copyright (C) 2004 Arcom Control Systems
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/wait.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-pca.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include "../algos/i2c-algo-pca.h"
|
|
|
|
#define IO_SIZE 4
|
|
|
|
#undef DEBUG_IO
|
|
//#define DEBUG_IO
|
|
|
|
static unsigned long base = 0x330;
|
|
static int irq = 10;
|
|
|
|
/* Data sheet recommends 59kHz for 100kHz operation due to variation
|
|
* in the actual clock rate */
|
|
static int clock = I2C_PCA_CON_59kHz;
|
|
|
|
static int own = 0x55;
|
|
|
|
static wait_queue_head_t pca_wait;
|
|
|
|
static int pca_isa_getown(struct i2c_algo_pca_data *adap)
|
|
{
|
|
return (own);
|
|
}
|
|
|
|
static int pca_isa_getclock(struct i2c_algo_pca_data *adap)
|
|
{
|
|
return (clock);
|
|
}
|
|
|
|
static void
|
|
pca_isa_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
|
|
{
|
|
#ifdef DEBUG_IO
|
|
static char *names[] = { "T/O", "DAT", "ADR", "CON" };
|
|
printk("*** write %s at %#lx <= %#04x\n", names[reg], base+reg, val);
|
|
#endif
|
|
outb(val, base+reg);
|
|
}
|
|
|
|
static int
|
|
pca_isa_readbyte(struct i2c_algo_pca_data *adap, int reg)
|
|
{
|
|
int res = inb(base+reg);
|
|
#ifdef DEBUG_IO
|
|
{
|
|
static char *names[] = { "STA", "DAT", "ADR", "CON" };
|
|
printk("*** read %s => %#04x\n", names[reg], res);
|
|
}
|
|
#endif
|
|
return res;
|
|
}
|
|
|
|
static int pca_isa_waitforinterrupt(struct i2c_algo_pca_data *adap)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (irq > -1) {
|
|
ret = wait_event_interruptible(pca_wait,
|
|
pca_isa_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
|
|
} else {
|
|
while ((pca_isa_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
|
|
udelay(100);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t pca_handler(int this_irq, void *dev_id, struct pt_regs *regs) {
|
|
wake_up_interruptible(&pca_wait);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct i2c_algo_pca_data pca_isa_data = {
|
|
.get_own = pca_isa_getown,
|
|
.get_clock = pca_isa_getclock,
|
|
.write_byte = pca_isa_writebyte,
|
|
.read_byte = pca_isa_readbyte,
|
|
.wait_for_interrupt = pca_isa_waitforinterrupt,
|
|
};
|
|
|
|
static struct i2c_adapter pca_isa_ops = {
|
|
.owner = THIS_MODULE,
|
|
.id = I2C_HW_A_ISA,
|
|
.algo_data = &pca_isa_data,
|
|
.name = "PCA9564 ISA Adapter",
|
|
};
|
|
|
|
static int __init pca_isa_init(void)
|
|
{
|
|
|
|
init_waitqueue_head(&pca_wait);
|
|
|
|
printk(KERN_INFO "i2c-pca-isa: i/o base %#08lx. irq %d\n", base, irq);
|
|
|
|
if (!request_region(base, IO_SIZE, "i2c-pca-isa")) {
|
|
printk(KERN_ERR "i2c-pca-isa: I/O address %#08lx is in use.\n", base);
|
|
goto out;
|
|
}
|
|
|
|
if (irq > -1) {
|
|
if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) {
|
|
printk(KERN_ERR "i2c-pca-isa: Request irq%d failed\n", irq);
|
|
goto out_region;
|
|
}
|
|
}
|
|
|
|
if (i2c_pca_add_bus(&pca_isa_ops) < 0) {
|
|
printk(KERN_ERR "i2c-pca-isa: Failed to add i2c bus\n");
|
|
goto out_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_irq:
|
|
if (irq > -1)
|
|
free_irq(irq, &pca_isa_ops);
|
|
out_region:
|
|
release_region(base, IO_SIZE);
|
|
out:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void pca_isa_exit(void)
|
|
{
|
|
i2c_pca_del_bus(&pca_isa_ops);
|
|
|
|
if (irq > 0) {
|
|
disable_irq(irq);
|
|
free_irq(irq, &pca_isa_ops);
|
|
}
|
|
release_region(base, IO_SIZE);
|
|
}
|
|
|
|
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
|
|
MODULE_DESCRIPTION("ISA base PCA9564 driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(base, ulong, 0);
|
|
MODULE_PARM_DESC(base, "I/O base address");
|
|
|
|
module_param(irq, int, 0);
|
|
MODULE_PARM_DESC(irq, "IRQ");
|
|
module_param(clock, int, 0);
|
|
MODULE_PARM_DESC(clock, "Clock rate as described in table 1 of PCA9564 datasheet");
|
|
|
|
module_param(own, int, 0); /* the driver can't do slave mode, so there's no real point in this */
|
|
|
|
module_init(pca_isa_init);
|
|
module_exit(pca_isa_exit);
|