9fc89c2dea
got this HiSax bootup crash on a "make randconfig" bzImage bootup: Calling initcall 0xc0bb1320: HiSax_init+0x0/0x380() HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (kernel) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: HFC-S driver Rev. 1.10.2.4 HFCS: defined at 0x500 IRQ 5 HZ 250 Teles 16.3c: IRQ 5 count 0 HFCS: resetting card Teles 16.3c: IRQ 5 count 0 Teles 16.3c: IRQ(5) getting no interrupts during init 1 HFCS: resetting card ------------[ cut here ]------------ kernel BUG at include/linux/timer.h:145! invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.24-rc3 #2045) EIP: 0060:[<c063afbf>] EFLAGS: 00010286 CPU: 0 EIP is at hfcs_card_msg+0x15f/0x180 EAX: c0cf2e5c EBX: 000000f2 ECX: 00000000 EDX: ffff1193 ESI: f76e8000 EDI: f76e8000 EBP: f7c23ec4 ESP: f7c23eac DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f7c22000 task=f7c0e000 task.ti=f7c22000) Stack: 00000000 f7c23ec4 c011703b 00000002 f76e8000 00000000 f7c23ef8 c060c3e5 c0a7c9c0 c0a315dc 00000005 00000001 00000000 f7c23f34 00000000 c0b5c9c0 f7c23f34 00000000 c0f5a8e0 f7c23f80 c0bb154f 00000000 00000001 c0a9b5b9 Call Trace: [<c010339a>] show_trace_log_lvl+0x1a/0x40 [<c0103469>] show_stack_log_lvl+0xa9/0xe0 [<c010355f>] show_registers+0xbf/0x200 [<c01037a4>] die+0x104/0x220 [<c0103943>] do_trap+0x83/0xc0 [<c0103ca8>] do_invalid_op+0x88/0xa0 [<c083621a>] error_code+0x6a/0x70 [<c060c3e5>] checkcard+0x4a5/0x620 [<c0bb154f>] HiSax_init+0x22f/0x380 [<c0b867b7>] kernel_init+0x97/0x2a0 [<c0102f87>] kernel_thread_helper+0x7/0x20 ======================= Code: e8 43 ae ff 8b 57 3c 85 d2 0f 84 ef fe ff ff b8 a0 99 ad c0 b9 02 00 00 00 e8 ce 11 ae ff 83 c4 0c b8 00 00 00 00 5b 5e 5f c9 c3 <0f> 0b eb fe 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 EIP: [<c063afbf>] hfcs_card_msg+0x15f/0x180 SS:ESP 0068:f7c23eac Kernel panic - not syncing: Attempted to kill init! The box has no HiSax card installed. the reason for the crash is add_timer() done on an already running timer. This happens because for some reason CARD_INIT is called twice. this patch works this problem around by using mod_timer() - this gets a booting system - but it would be nice to figure out why CARD_INIT is done twice. the ISDN config section (generated via make randconfig) is this: # # ISDN feature submodules # # CONFIG_ISDN_DRV_LOOP is not set CONFIG_ISDN_DIVERSION=y # # ISDN4Linux hardware drivers # # # Passive cards # CONFIG_ISDN_DRV_HISAX=y # # D-channel protocol features # CONFIG_HISAX_EURO=y CONFIG_DE_AOC=y # CONFIG_HISAX_NO_SENDCOMPLETE is not set # CONFIG_HISAX_NO_LLC is not set # CONFIG_HISAX_NO_KEYPAD is not set CONFIG_HISAX_1TR6=y CONFIG_HISAX_NI1=y CONFIG_HISAX_MAX_CARDS=8 # # HiSax supported cards # CONFIG_HISAX_16_0=y # CONFIG_HISAX_16_3 is not set # CONFIG_HISAX_TELESPCI is not set CONFIG_HISAX_S0BOX=y # CONFIG_HISAX_AVM_A1 is not set CONFIG_HISAX_FRITZPCI=y CONFIG_HISAX_AVM_A1_PCMCIA=y CONFIG_HISAX_ELSA=y CONFIG_HISAX_IX1MICROR2=y CONFIG_HISAX_DIEHLDIVA=y # CONFIG_HISAX_ASUSCOM is not set # CONFIG_HISAX_TELEINT is not set CONFIG_HISAX_HFCS=y # CONFIG_HISAX_SEDLBAUER is not set CONFIG_HISAX_SPORTSTER=y # CONFIG_HISAX_MIC is not set # CONFIG_HISAX_NETJET is not set # CONFIG_HISAX_NETJET_U is not set # CONFIG_HISAX_NICCY is not set # CONFIG_HISAX_ISURF is not set # CONFIG_HISAX_HSTSAPHIR is not set # CONFIG_HISAX_BKM_A4T is not set # CONFIG_HISAX_SCT_QUADRO is not set # CONFIG_HISAX_GAZEL is not set # CONFIG_HISAX_HFC_PCI is not set # CONFIG_HISAX_W6692 is not set # CONFIG_HISAX_HFC_SX is not set # CONFIG_HISAX_DEBUG is not set # # HiSax PCMCIA card service modules # # # HiSax sub driver modules # CONFIG_HISAX_ST5481=y CONFIG_HISAX_HFCUSB=y # CONFIG_HISAX_HFC4S8S is not set CONFIG_HISAX_FRITZ_PCIPNP=y CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_ISDN_DRV_ICN=m CONFIG_ISDN_DRV_PCBIT=m CONFIG_ISDN_DRV_SC=y # CONFIG_ISDN_DRV_ACT2000 is not set CONFIG_HYSDN=m # CONFIG_ISDN_DRV_GIGASET is not set # CONFIG_ISDN_CAPI is not set CONFIG_PHONE=y CONFIG_PHONE_IXJ=m Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Karsten Keil <kkeil@suse.de> Cc: Kai Germaschewski <kai@germaschewski.name> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
---|---|---|
.. | ||
acorn/char | ||
acpi | ||
amba | ||
ata | ||
atm | ||
auxdisplay | ||
base | ||
block | ||
bluetooth | ||
cdrom | ||
char | ||
clocksource | ||
connector | ||
cpufreq | ||
cpuidle | ||
crypto | ||
dca | ||
dio | ||
dma | ||
edac | ||
eisa | ||
firewire | ||
firmware | ||
hid | ||
hwmon | ||
i2c | ||
ide | ||
ieee1394 | ||
infiniband | ||
input | ||
isdn | ||
kvm | ||
leds | ||
lguest | ||
macintosh | ||
mca | ||
md | ||
media | ||
message | ||
mfd | ||
misc | ||
mmc | ||
mtd | ||
net | ||
nubus | ||
of | ||
oprofile | ||
parisc | ||
parport | ||
pci | ||
pcmcia | ||
pnp | ||
power | ||
ps3 | ||
rapidio | ||
rtc | ||
s390 | ||
sbus | ||
scsi | ||
serial | ||
sh | ||
sn | ||
spi | ||
ssb | ||
tc | ||
telephony | ||
uio | ||
usb | ||
video | ||
virtio | ||
w1 | ||
watchdog | ||
xen | ||
zorro | ||
Kconfig | ||
Makefile |