ff699e6bd0
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
1162 lines
29 KiB
C
1162 lines
29 KiB
C
/*
|
|
* tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
|
|
*
|
|
* Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
|
|
* This code is placed under the terms of the GNU General Public License v2
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/videodev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/video_decoder.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/tvp5150.h>
|
|
|
|
#include "tvp5150_reg.h"
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
|
|
MODULE_AUTHOR("Mauro Carvalho Chehab");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* standard i2c insmod options */
|
|
static unsigned short normal_i2c[] = {
|
|
0xb8 >> 1,
|
|
0xba >> 1,
|
|
I2C_CLIENT_END
|
|
};
|
|
|
|
I2C_CLIENT_INSMOD;
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Debug level (0-1)");
|
|
|
|
#define tvp5150_err(fmt, arg...) do { \
|
|
printk(KERN_ERR "%s %d-%04x: " fmt, c->driver->driver.name, \
|
|
i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
|
|
#define tvp5150_info(fmt, arg...) do { \
|
|
printk(KERN_INFO "%s %d-%04x: " fmt, c->driver->driver.name, \
|
|
i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
|
|
#define tvp5150_dbg(num, fmt, arg...) \
|
|
do { \
|
|
if (debug >= num) \
|
|
printk(KERN_DEBUG "%s debug %d-%04x: " fmt,\
|
|
c->driver->driver.name, \
|
|
i2c_adapter_id(c->adapter), \
|
|
c->addr , ## arg); } while (0)
|
|
|
|
/* supported controls */
|
|
static struct v4l2_queryctrl tvp5150_qctrl[] = {
|
|
{
|
|
.id = V4L2_CID_BRIGHTNESS,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Brightness",
|
|
.minimum = 0,
|
|
.maximum = 255,
|
|
.step = 1,
|
|
.default_value = 128,
|
|
.flags = 0,
|
|
}, {
|
|
.id = V4L2_CID_CONTRAST,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Contrast",
|
|
.minimum = 0,
|
|
.maximum = 255,
|
|
.step = 0x1,
|
|
.default_value = 128,
|
|
.flags = 0,
|
|
}, {
|
|
.id = V4L2_CID_SATURATION,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Saturation",
|
|
.minimum = 0,
|
|
.maximum = 255,
|
|
.step = 0x1,
|
|
.default_value = 128,
|
|
.flags = 0,
|
|
}, {
|
|
.id = V4L2_CID_HUE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Hue",
|
|
.minimum = -128,
|
|
.maximum = 127,
|
|
.step = 0x1,
|
|
.default_value = 0,
|
|
.flags = 0,
|
|
}
|
|
};
|
|
|
|
struct tvp5150 {
|
|
struct i2c_client *client;
|
|
|
|
v4l2_std_id norm; /* Current set standard */
|
|
struct v4l2_routing route;
|
|
int enable;
|
|
int bright;
|
|
int contrast;
|
|
int hue;
|
|
int sat;
|
|
};
|
|
|
|
static int tvp5150_read(struct i2c_client *c, unsigned char addr)
|
|
{
|
|
unsigned char buffer[1];
|
|
int rc;
|
|
|
|
buffer[0] = addr;
|
|
if (1 != (rc = i2c_master_send(c, buffer, 1)))
|
|
tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc);
|
|
|
|
msleep(10);
|
|
|
|
if (1 != (rc = i2c_master_recv(c, buffer, 1)))
|
|
tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc);
|
|
|
|
tvp5150_dbg(2, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
|
|
|
|
return (buffer[0]);
|
|
}
|
|
|
|
static inline void tvp5150_write(struct i2c_client *c, unsigned char addr,
|
|
unsigned char value)
|
|
{
|
|
unsigned char buffer[2];
|
|
int rc;
|
|
|
|
buffer[0] = addr;
|
|
buffer[1] = value;
|
|
tvp5150_dbg(2, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
|
|
if (2 != (rc = i2c_master_send(c, buffer, 2)))
|
|
tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 2)\n", rc);
|
|
}
|
|
|
|
static void dump_reg_range(struct i2c_client *c, char *s, u8 init, const u8 end,int max_line)
|
|
{
|
|
int i=0;
|
|
|
|
while (init!=(u8)(end+1)) {
|
|
if ((i%max_line) == 0) {
|
|
if (i>0)
|
|
printk("\n");
|
|
printk("tvp5150: %s reg 0x%02x = ",s,init);
|
|
}
|
|
printk("%02x ",tvp5150_read(c, init));
|
|
|
|
init++;
|
|
i++;
|
|
}
|
|
printk("\n");
|
|
}
|
|
|
|
static void dump_reg(struct i2c_client *c)
|
|
{
|
|
printk("tvp5150: Video input source selection #1 = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_VD_IN_SRC_SEL_1));
|
|
printk("tvp5150: Analog channel controls = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_ANAL_CHL_CTL));
|
|
printk("tvp5150: Operation mode controls = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_OP_MODE_CTL));
|
|
printk("tvp5150: Miscellaneous controls = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_MISC_CTL));
|
|
printk("tvp5150: Autoswitch mask= 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_AUTOSW_MSK));
|
|
printk("tvp5150: Color killer threshold control = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_COLOR_KIL_THSH_CTL));
|
|
printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
|
|
tvp5150_read(c, TVP5150_LUMA_PROC_CTL_1),
|
|
tvp5150_read(c, TVP5150_LUMA_PROC_CTL_2),
|
|
tvp5150_read(c, TVP5150_LUMA_PROC_CTL_3));
|
|
printk("tvp5150: Brightness control = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_BRIGHT_CTL));
|
|
printk("tvp5150: Color saturation control = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_SATURATION_CTL));
|
|
printk("tvp5150: Hue control = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_HUE_CTL));
|
|
printk("tvp5150: Contrast control = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_CONTRAST_CTL));
|
|
printk("tvp5150: Outputs and data rates select = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_DATA_RATE_SEL));
|
|
printk("tvp5150: Configuration shared pins = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_CONF_SHARED_PIN));
|
|
printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
|
|
tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_MSB),
|
|
tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_LSB));
|
|
printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
|
|
tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_MSB),
|
|
tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_LSB));
|
|
printk("tvp5150: Genlock/RTC = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_GENLOCK));
|
|
printk("tvp5150: Horizontal sync start = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_HORIZ_SYNC_START));
|
|
printk("tvp5150: Vertical blanking start = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_VERT_BLANKING_START));
|
|
printk("tvp5150: Vertical blanking stop = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_VERT_BLANKING_STOP));
|
|
printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
|
|
tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_1),
|
|
tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_2));
|
|
printk("tvp5150: Interrupt reset register B = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_INT_RESET_REG_B));
|
|
printk("tvp5150: Interrupt enable register B = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_INT_ENABLE_REG_B));
|
|
printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_INTT_CONFIG_REG_B));
|
|
printk("tvp5150: Video standard = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_VIDEO_STD));
|
|
printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
|
|
tvp5150_read(c, TVP5150_CB_GAIN_FACT),
|
|
tvp5150_read(c, TVP5150_CR_GAIN_FACTOR));
|
|
printk("tvp5150: Macrovision on counter = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_MACROVISION_ON_CTR));
|
|
printk("tvp5150: Macrovision off counter = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_MACROVISION_OFF_CTR));
|
|
printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
|
|
(tvp5150_read(c, TVP5150_REV_SELECT)&1)?3:4);
|
|
printk("tvp5150: Device ID = %02x%02x\n",
|
|
tvp5150_read(c, TVP5150_MSB_DEV_ID),
|
|
tvp5150_read(c, TVP5150_LSB_DEV_ID));
|
|
printk("tvp5150: ROM version = (hex) %02x.%02x\n",
|
|
tvp5150_read(c, TVP5150_ROM_MAJOR_VER),
|
|
tvp5150_read(c, TVP5150_ROM_MINOR_VER));
|
|
printk("tvp5150: Vertical line count = 0x%02x%02x\n",
|
|
tvp5150_read(c, TVP5150_VERT_LN_COUNT_MSB),
|
|
tvp5150_read(c, TVP5150_VERT_LN_COUNT_LSB));
|
|
printk("tvp5150: Interrupt status register B = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_INT_STATUS_REG_B));
|
|
printk("tvp5150: Interrupt active register B = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_INT_ACTIVE_REG_B));
|
|
printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
|
|
tvp5150_read(c, TVP5150_STATUS_REG_1),
|
|
tvp5150_read(c, TVP5150_STATUS_REG_2),
|
|
tvp5150_read(c, TVP5150_STATUS_REG_3),
|
|
tvp5150_read(c, TVP5150_STATUS_REG_4),
|
|
tvp5150_read(c, TVP5150_STATUS_REG_5));
|
|
|
|
dump_reg_range(c,"Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
|
|
TVP5150_TELETEXT_FIL1_END,8);
|
|
dump_reg_range(c,"Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
|
|
TVP5150_TELETEXT_FIL2_END,8);
|
|
|
|
printk("tvp5150: Teletext filter enable = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_TELETEXT_FIL_ENA));
|
|
printk("tvp5150: Interrupt status register A = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_INT_STATUS_REG_A));
|
|
printk("tvp5150: Interrupt enable register A = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_INT_ENABLE_REG_A));
|
|
printk("tvp5150: Interrupt configuration = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_INT_CONF));
|
|
printk("tvp5150: VDP status register = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_VDP_STATUS_REG));
|
|
printk("tvp5150: FIFO word count = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_FIFO_WORD_COUNT));
|
|
printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_FIFO_INT_THRESHOLD));
|
|
printk("tvp5150: FIFO reset = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_FIFO_RESET));
|
|
printk("tvp5150: Line number interrupt = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_LINE_NUMBER_INT));
|
|
printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
|
|
tvp5150_read(c, TVP5150_PIX_ALIGN_REG_HIGH),
|
|
tvp5150_read(c, TVP5150_PIX_ALIGN_REG_LOW));
|
|
printk("tvp5150: FIFO output control = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_FIFO_OUT_CTRL));
|
|
printk("tvp5150: Full field enable = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_FULL_FIELD_ENA));
|
|
printk("tvp5150: Full field mode register = 0x%02x\n",
|
|
tvp5150_read(c, TVP5150_FULL_FIELD_MODE_REG));
|
|
|
|
dump_reg_range(c,"CC data", TVP5150_CC_DATA_INI,
|
|
TVP5150_CC_DATA_END,8);
|
|
|
|
dump_reg_range(c,"WSS data", TVP5150_WSS_DATA_INI,
|
|
TVP5150_WSS_DATA_END,8);
|
|
|
|
dump_reg_range(c,"VPS data", TVP5150_VPS_DATA_INI,
|
|
TVP5150_VPS_DATA_END,8);
|
|
|
|
dump_reg_range(c,"VITC data", TVP5150_VITC_DATA_INI,
|
|
TVP5150_VITC_DATA_END,10);
|
|
|
|
dump_reg_range(c,"Line mode", TVP5150_LINE_MODE_INI,
|
|
TVP5150_LINE_MODE_END,8);
|
|
}
|
|
|
|
/****************************************************************************
|
|
Basic functions
|
|
****************************************************************************/
|
|
|
|
static inline void tvp5150_selmux(struct i2c_client *c)
|
|
{
|
|
int opmode=0;
|
|
struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
int input = 0;
|
|
unsigned char val;
|
|
|
|
if ((decoder->route.output & TVP5150_BLACK_SCREEN) || !decoder->enable)
|
|
input = 8;
|
|
|
|
switch (decoder->route.input) {
|
|
case TVP5150_COMPOSITE1:
|
|
input |= 2;
|
|
/* fall through */
|
|
case TVP5150_COMPOSITE0:
|
|
opmode=0x30; /* TV Mode */
|
|
break;
|
|
case TVP5150_SVIDEO:
|
|
default:
|
|
input |= 1;
|
|
opmode=0; /* Auto Mode */
|
|
break;
|
|
}
|
|
|
|
tvp5150_dbg( 1, "Selecting video route: route input=%i, output=%i "
|
|
"=> tvp5150 input=%i, opmode=%i\n",
|
|
decoder->route.input,decoder->route.output,
|
|
input, opmode );
|
|
|
|
tvp5150_write(c, TVP5150_OP_MODE_CTL, opmode);
|
|
tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input);
|
|
|
|
/* Svideo should enable YCrCb output and disable GPCL output
|
|
* For Composite and TV, it should be the reverse
|
|
*/
|
|
val = tvp5150_read(c, TVP5150_MISC_CTL);
|
|
if (decoder->route.input == TVP5150_SVIDEO)
|
|
val = (val & ~0x40) | 0x10;
|
|
else
|
|
val = (val & ~0x10) | 0x40;
|
|
tvp5150_write(c, TVP5150_MISC_CTL, val);
|
|
};
|
|
|
|
struct i2c_reg_value {
|
|
unsigned char reg;
|
|
unsigned char value;
|
|
};
|
|
|
|
/* Default values as sugested at TVP5150AM1 datasheet */
|
|
static const struct i2c_reg_value tvp5150_init_default[] = {
|
|
{ /* 0x00 */
|
|
TVP5150_VD_IN_SRC_SEL_1,0x00
|
|
},
|
|
{ /* 0x01 */
|
|
TVP5150_ANAL_CHL_CTL,0x15
|
|
},
|
|
{ /* 0x02 */
|
|
TVP5150_OP_MODE_CTL,0x00
|
|
},
|
|
{ /* 0x03 */
|
|
TVP5150_MISC_CTL,0x01
|
|
},
|
|
{ /* 0x06 */
|
|
TVP5150_COLOR_KIL_THSH_CTL,0x10
|
|
},
|
|
{ /* 0x07 */
|
|
TVP5150_LUMA_PROC_CTL_1,0x60
|
|
},
|
|
{ /* 0x08 */
|
|
TVP5150_LUMA_PROC_CTL_2,0x00
|
|
},
|
|
{ /* 0x09 */
|
|
TVP5150_BRIGHT_CTL,0x80
|
|
},
|
|
{ /* 0x0a */
|
|
TVP5150_SATURATION_CTL,0x80
|
|
},
|
|
{ /* 0x0b */
|
|
TVP5150_HUE_CTL,0x00
|
|
},
|
|
{ /* 0x0c */
|
|
TVP5150_CONTRAST_CTL,0x80
|
|
},
|
|
{ /* 0x0d */
|
|
TVP5150_DATA_RATE_SEL,0x47
|
|
},
|
|
{ /* 0x0e */
|
|
TVP5150_LUMA_PROC_CTL_3,0x00
|
|
},
|
|
{ /* 0x0f */
|
|
TVP5150_CONF_SHARED_PIN,0x08
|
|
},
|
|
{ /* 0x11 */
|
|
TVP5150_ACT_VD_CROP_ST_MSB,0x00
|
|
},
|
|
{ /* 0x12 */
|
|
TVP5150_ACT_VD_CROP_ST_LSB,0x00
|
|
},
|
|
{ /* 0x13 */
|
|
TVP5150_ACT_VD_CROP_STP_MSB,0x00
|
|
},
|
|
{ /* 0x14 */
|
|
TVP5150_ACT_VD_CROP_STP_LSB,0x00
|
|
},
|
|
{ /* 0x15 */
|
|
TVP5150_GENLOCK,0x01
|
|
},
|
|
{ /* 0x16 */
|
|
TVP5150_HORIZ_SYNC_START,0x80
|
|
},
|
|
{ /* 0x18 */
|
|
TVP5150_VERT_BLANKING_START,0x00
|
|
},
|
|
{ /* 0x19 */
|
|
TVP5150_VERT_BLANKING_STOP,0x00
|
|
},
|
|
{ /* 0x1a */
|
|
TVP5150_CHROMA_PROC_CTL_1,0x0c
|
|
},
|
|
{ /* 0x1b */
|
|
TVP5150_CHROMA_PROC_CTL_2,0x14
|
|
},
|
|
{ /* 0x1c */
|
|
TVP5150_INT_RESET_REG_B,0x00
|
|
},
|
|
{ /* 0x1d */
|
|
TVP5150_INT_ENABLE_REG_B,0x00
|
|
},
|
|
{ /* 0x1e */
|
|
TVP5150_INTT_CONFIG_REG_B,0x00
|
|
},
|
|
{ /* 0x28 */
|
|
TVP5150_VIDEO_STD,0x00
|
|
},
|
|
{ /* 0x2e */
|
|
TVP5150_MACROVISION_ON_CTR,0x0f
|
|
},
|
|
{ /* 0x2f */
|
|
TVP5150_MACROVISION_OFF_CTR,0x01
|
|
},
|
|
{ /* 0xbb */
|
|
TVP5150_TELETEXT_FIL_ENA,0x00
|
|
},
|
|
{ /* 0xc0 */
|
|
TVP5150_INT_STATUS_REG_A,0x00
|
|
},
|
|
{ /* 0xc1 */
|
|
TVP5150_INT_ENABLE_REG_A,0x00
|
|
},
|
|
{ /* 0xc2 */
|
|
TVP5150_INT_CONF,0x04
|
|
},
|
|
{ /* 0xc8 */
|
|
TVP5150_FIFO_INT_THRESHOLD,0x80
|
|
},
|
|
{ /* 0xc9 */
|
|
TVP5150_FIFO_RESET,0x00
|
|
},
|
|
{ /* 0xca */
|
|
TVP5150_LINE_NUMBER_INT,0x00
|
|
},
|
|
{ /* 0xcb */
|
|
TVP5150_PIX_ALIGN_REG_LOW,0x4e
|
|
},
|
|
{ /* 0xcc */
|
|
TVP5150_PIX_ALIGN_REG_HIGH,0x00
|
|
},
|
|
{ /* 0xcd */
|
|
TVP5150_FIFO_OUT_CTRL,0x01
|
|
},
|
|
{ /* 0xcf */
|
|
TVP5150_FULL_FIELD_ENA,0x00
|
|
},
|
|
{ /* 0xd0 */
|
|
TVP5150_LINE_MODE_INI,0x00
|
|
},
|
|
{ /* 0xfc */
|
|
TVP5150_FULL_FIELD_MODE_REG,0x7f
|
|
},
|
|
{ /* end of data */
|
|
0xff,0xff
|
|
}
|
|
};
|
|
|
|
/* Default values as sugested at TVP5150AM1 datasheet */
|
|
static const struct i2c_reg_value tvp5150_init_enable[] = {
|
|
{
|
|
TVP5150_CONF_SHARED_PIN, 2
|
|
},{ /* Automatic offset and AGC enabled */
|
|
TVP5150_ANAL_CHL_CTL, 0x15
|
|
},{ /* Activate YCrCb output 0x9 or 0xd ? */
|
|
TVP5150_MISC_CTL, 0x6f
|
|
},{ /* Activates video std autodetection for all standards */
|
|
TVP5150_AUTOSW_MSK, 0x0
|
|
},{ /* Default format: 0x47. For 4:2:2: 0x40 */
|
|
TVP5150_DATA_RATE_SEL, 0x47
|
|
},{
|
|
TVP5150_CHROMA_PROC_CTL_1, 0x0c
|
|
},{
|
|
TVP5150_CHROMA_PROC_CTL_2, 0x54
|
|
},{ /* Non documented, but initialized on WinTV USB2 */
|
|
0x27, 0x20
|
|
},{
|
|
0xff,0xff
|
|
}
|
|
};
|
|
|
|
struct tvp5150_vbi_type {
|
|
unsigned int vbi_type;
|
|
unsigned int ini_line;
|
|
unsigned int end_line;
|
|
unsigned int by_field :1;
|
|
};
|
|
|
|
struct i2c_vbi_ram_value {
|
|
u16 reg;
|
|
struct tvp5150_vbi_type type;
|
|
unsigned char values[16];
|
|
};
|
|
|
|
/* This struct have the values for each supported VBI Standard
|
|
* by
|
|
tvp5150_vbi_types should follow the same order as vbi_ram_default
|
|
* value 0 means rom position 0x10, value 1 means rom position 0x30
|
|
* and so on. There are 16 possible locations from 0 to 15.
|
|
*/
|
|
|
|
static struct i2c_vbi_ram_value vbi_ram_default[] =
|
|
{
|
|
/* FIXME: Current api doesn't handle all VBI types, those not
|
|
yet supported are placed under #if 0 */
|
|
#if 0
|
|
{0x010, /* Teletext, SECAM, WST System A */
|
|
{V4L2_SLICED_TELETEXT_SECAM,6,23,1},
|
|
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
|
|
0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
|
|
},
|
|
#endif
|
|
{0x030, /* Teletext, PAL, WST System B */
|
|
{V4L2_SLICED_TELETEXT_B,6,22,1},
|
|
{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
|
|
0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
|
|
},
|
|
#if 0
|
|
{0x050, /* Teletext, PAL, WST System C */
|
|
{V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
|
|
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
|
|
0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
|
|
},
|
|
{0x070, /* Teletext, NTSC, WST System B */
|
|
{V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
|
|
{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
|
|
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
|
|
},
|
|
{0x090, /* Tetetext, NTSC NABTS System C */
|
|
{V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
|
|
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
|
|
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
|
|
},
|
|
{0x0b0, /* Teletext, NTSC-J, NABTS System D */
|
|
{V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
|
|
{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
|
|
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
|
|
},
|
|
{0x0d0, /* Closed Caption, PAL/SECAM */
|
|
{V4L2_SLICED_CAPTION_625,22,22,1},
|
|
{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
|
|
0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
|
|
},
|
|
#endif
|
|
{0x0f0, /* Closed Caption, NTSC */
|
|
{V4L2_SLICED_CAPTION_525,21,21,1},
|
|
{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
|
|
0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
|
|
},
|
|
{0x110, /* Wide Screen Signal, PAL/SECAM */
|
|
{V4L2_SLICED_WSS_625,23,23,1},
|
|
{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
|
|
0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
|
|
},
|
|
#if 0
|
|
{0x130, /* Wide Screen Signal, NTSC C */
|
|
{V4L2_SLICED_WSS_525,20,20,1},
|
|
{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
|
|
0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
|
|
},
|
|
{0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
|
|
{V4l2_SLICED_VITC_625,6,22,0},
|
|
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
|
|
0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
|
|
},
|
|
{0x170, /* Vertical Interval Timecode (VITC), NTSC */
|
|
{V4l2_SLICED_VITC_525,10,20,0},
|
|
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
|
|
0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
|
|
},
|
|
#endif
|
|
{0x190, /* Video Program System (VPS), PAL */
|
|
{V4L2_SLICED_VPS,16,16,0},
|
|
{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
|
|
0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
|
|
},
|
|
/* 0x1d0 User programmable */
|
|
|
|
/* End of struct */
|
|
{ (u16)-1 }
|
|
};
|
|
|
|
static int tvp5150_write_inittab(struct i2c_client *c,
|
|
const struct i2c_reg_value *regs)
|
|
{
|
|
while (regs->reg != 0xff) {
|
|
tvp5150_write(c, regs->reg, regs->value);
|
|
regs++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tvp5150_vdp_init(struct i2c_client *c,
|
|
const struct i2c_vbi_ram_value *regs)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* Disable Full Field */
|
|
tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0);
|
|
|
|
/* Before programming, Line mode should be at 0xff */
|
|
for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++)
|
|
tvp5150_write(c, i, 0xff);
|
|
|
|
/* Load Ram Table */
|
|
while (regs->reg != (u16)-1 ) {
|
|
tvp5150_write(c, TVP5150_CONF_RAM_ADDR_HIGH,regs->reg>>8);
|
|
tvp5150_write(c, TVP5150_CONF_RAM_ADDR_LOW,regs->reg);
|
|
|
|
for (i=0;i<16;i++)
|
|
tvp5150_write(c, TVP5150_VDP_CONF_RAM_DATA,regs->values[i]);
|
|
|
|
regs++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Fills VBI capabilities based on i2c_vbi_ram_value struct */
|
|
static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs,
|
|
struct v4l2_sliced_vbi_cap *cap)
|
|
{
|
|
int line;
|
|
|
|
memset(cap, 0, sizeof *cap);
|
|
|
|
while (regs->reg != (u16)-1 ) {
|
|
for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
|
|
cap->service_lines[0][line] |= regs->type.vbi_type;
|
|
}
|
|
cap->service_set |= regs->type.vbi_type;
|
|
|
|
regs++;
|
|
}
|
|
}
|
|
|
|
/* Set vbi processing
|
|
* type - one of tvp5150_vbi_types
|
|
* line - line to gather data
|
|
* fields: bit 0 field1, bit 1, field2
|
|
* flags (default=0xf0) is a bitmask, were set means:
|
|
* bit 7: enable filtering null bytes on CC
|
|
* bit 6: send data also to FIFO
|
|
* bit 5: don't allow data with errors on FIFO
|
|
* bit 4: enable ECC when possible
|
|
* pix_align = pix alignment:
|
|
* LSB = field1
|
|
* MSB = field2
|
|
*/
|
|
static int tvp5150_set_vbi(struct i2c_client *c,
|
|
const struct i2c_vbi_ram_value *regs,
|
|
unsigned int type,u8 flags, int line,
|
|
const int fields)
|
|
{
|
|
struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
v4l2_std_id std=decoder->norm;
|
|
u8 reg;
|
|
int pos=0;
|
|
|
|
if (std == V4L2_STD_ALL) {
|
|
tvp5150_err("VBI can't be configured without knowing number of lines\n");
|
|
return 0;
|
|
} else if (std & V4L2_STD_625_50) {
|
|
/* Don't follow NTSC Line number convension */
|
|
line += 3;
|
|
}
|
|
|
|
if (line<6||line>27)
|
|
return 0;
|
|
|
|
while (regs->reg != (u16)-1 ) {
|
|
if ((type & regs->type.vbi_type) &&
|
|
(line>=regs->type.ini_line) &&
|
|
(line<=regs->type.end_line)) {
|
|
type=regs->type.vbi_type;
|
|
break;
|
|
}
|
|
|
|
regs++;
|
|
pos++;
|
|
}
|
|
if (regs->reg == (u16)-1)
|
|
return 0;
|
|
|
|
type=pos | (flags & 0xf0);
|
|
reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
|
|
|
|
if (fields&1) {
|
|
tvp5150_write(c, reg, type);
|
|
}
|
|
|
|
if (fields&2) {
|
|
tvp5150_write(c, reg+1, type);
|
|
}
|
|
|
|
return type;
|
|
}
|
|
|
|
static int tvp5150_get_vbi(struct i2c_client *c,
|
|
const struct i2c_vbi_ram_value *regs, int line)
|
|
{
|
|
struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
v4l2_std_id std=decoder->norm;
|
|
u8 reg;
|
|
int pos, type=0;
|
|
|
|
if (std == V4L2_STD_ALL) {
|
|
tvp5150_err("VBI can't be configured without knowing number of lines\n");
|
|
return 0;
|
|
} else if (std & V4L2_STD_625_50) {
|
|
/* Don't follow NTSC Line number convension */
|
|
line += 3;
|
|
}
|
|
|
|
if (line<6||line>27)
|
|
return 0;
|
|
|
|
reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
|
|
|
|
pos=tvp5150_read(c, reg)&0x0f;
|
|
if (pos<0x0f)
|
|
type=regs[pos].type.vbi_type;
|
|
|
|
pos=tvp5150_read(c, reg+1)&0x0f;
|
|
if (pos<0x0f)
|
|
type|=regs[pos].type.vbi_type;
|
|
|
|
return type;
|
|
}
|
|
static int tvp5150_set_std(struct i2c_client *c, v4l2_std_id std)
|
|
{
|
|
struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
int fmt=0;
|
|
|
|
decoder->norm=std;
|
|
|
|
/* First tests should be against specific std */
|
|
|
|
if (std == V4L2_STD_ALL) {
|
|
fmt=0; /* Autodetect mode */
|
|
} else if (std & V4L2_STD_NTSC_443) {
|
|
fmt=0xa;
|
|
} else if (std & V4L2_STD_PAL_M) {
|
|
fmt=0x6;
|
|
} else if (std & (V4L2_STD_PAL_N| V4L2_STD_PAL_Nc)) {
|
|
fmt=0x8;
|
|
} else {
|
|
/* Then, test against generic ones */
|
|
if (std & V4L2_STD_NTSC) {
|
|
fmt=0x2;
|
|
} else if (std & V4L2_STD_PAL) {
|
|
fmt=0x4;
|
|
} else if (std & V4L2_STD_SECAM) {
|
|
fmt=0xc;
|
|
}
|
|
}
|
|
|
|
tvp5150_dbg(1,"Set video std register to %d.\n",fmt);
|
|
tvp5150_write(c, TVP5150_VIDEO_STD, fmt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void tvp5150_reset(struct i2c_client *c)
|
|
{
|
|
u8 msb_id, lsb_id, msb_rom, lsb_rom;
|
|
struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
|
msb_id=tvp5150_read(c,TVP5150_MSB_DEV_ID);
|
|
lsb_id=tvp5150_read(c,TVP5150_LSB_DEV_ID);
|
|
msb_rom=tvp5150_read(c,TVP5150_ROM_MAJOR_VER);
|
|
lsb_rom=tvp5150_read(c,TVP5150_ROM_MINOR_VER);
|
|
|
|
if ((msb_rom==4)&&(lsb_rom==0)) { /* Is TVP5150AM1 */
|
|
tvp5150_info("tvp%02x%02xam1 detected.\n",msb_id, lsb_id);
|
|
|
|
/* ITU-T BT.656.4 timing */
|
|
tvp5150_write(c,TVP5150_REV_SELECT,0);
|
|
} else {
|
|
if ((msb_rom==3)||(lsb_rom==0x21)) { /* Is TVP5150A */
|
|
tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
|
|
} else {
|
|
tvp5150_info("*** unknown tvp%02x%02x chip detected.\n",msb_id,lsb_id);
|
|
tvp5150_info("*** Rom ver is %d.%d\n",msb_rom,lsb_rom);
|
|
}
|
|
}
|
|
|
|
/* Initializes TVP5150 to its default values */
|
|
tvp5150_write_inittab(c, tvp5150_init_default);
|
|
|
|
/* Initializes VDP registers */
|
|
tvp5150_vdp_init(c, vbi_ram_default);
|
|
|
|
/* Selects decoder input */
|
|
tvp5150_selmux(c);
|
|
|
|
/* Initializes TVP5150 to stream enabled values */
|
|
tvp5150_write_inittab(c, tvp5150_init_enable);
|
|
|
|
/* Initialize image preferences */
|
|
tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright);
|
|
tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast);
|
|
tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast);
|
|
tvp5150_write(c, TVP5150_HUE_CTL, decoder->hue);
|
|
|
|
tvp5150_set_std(c, decoder->norm);
|
|
};
|
|
|
|
static int tvp5150_get_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
|
|
{
|
|
/* struct tvp5150 *decoder = i2c_get_clientdata(c); */
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
ctrl->value = tvp5150_read(c, TVP5150_BRIGHT_CTL);
|
|
return 0;
|
|
case V4L2_CID_CONTRAST:
|
|
ctrl->value = tvp5150_read(c, TVP5150_CONTRAST_CTL);
|
|
return 0;
|
|
case V4L2_CID_SATURATION:
|
|
ctrl->value = tvp5150_read(c, TVP5150_SATURATION_CTL);
|
|
return 0;
|
|
case V4L2_CID_HUE:
|
|
ctrl->value = tvp5150_read(c, TVP5150_HUE_CTL);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int tvp5150_set_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
|
|
{
|
|
/* struct tvp5150 *decoder = i2c_get_clientdata(c); */
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_BRIGHTNESS:
|
|
tvp5150_write(c, TVP5150_BRIGHT_CTL, ctrl->value);
|
|
return 0;
|
|
case V4L2_CID_CONTRAST:
|
|
tvp5150_write(c, TVP5150_CONTRAST_CTL, ctrl->value);
|
|
return 0;
|
|
case V4L2_CID_SATURATION:
|
|
tvp5150_write(c, TVP5150_SATURATION_CTL, ctrl->value);
|
|
return 0;
|
|
case V4L2_CID_HUE:
|
|
tvp5150_write(c, TVP5150_HUE_CTL, ctrl->value);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/****************************************************************************
|
|
I2C Command
|
|
****************************************************************************/
|
|
static int tvp5150_command(struct i2c_client *c,
|
|
unsigned int cmd, void *arg)
|
|
{
|
|
struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
|
|
switch (cmd) {
|
|
|
|
case 0:
|
|
case VIDIOC_INT_RESET:
|
|
tvp5150_reset(c);
|
|
break;
|
|
case VIDIOC_INT_G_VIDEO_ROUTING:
|
|
{
|
|
struct v4l2_routing *route = arg;
|
|
|
|
*route = decoder->route;
|
|
break;
|
|
}
|
|
case VIDIOC_INT_S_VIDEO_ROUTING:
|
|
{
|
|
struct v4l2_routing *route = arg;
|
|
|
|
decoder->route = *route;
|
|
tvp5150_selmux(c);
|
|
break;
|
|
}
|
|
case VIDIOC_S_STD:
|
|
if (decoder->norm == *(v4l2_std_id *)arg)
|
|
break;
|
|
return tvp5150_set_std(c, *(v4l2_std_id *)arg);
|
|
case VIDIOC_G_STD:
|
|
*(v4l2_std_id *)arg = decoder->norm;
|
|
break;
|
|
|
|
case VIDIOC_G_SLICED_VBI_CAP:
|
|
{
|
|
struct v4l2_sliced_vbi_cap *cap = arg;
|
|
tvp5150_dbg(1, "VIDIOC_G_SLICED_VBI_CAP\n");
|
|
|
|
tvp5150_vbi_get_cap(vbi_ram_default, cap);
|
|
break;
|
|
}
|
|
case VIDIOC_S_FMT:
|
|
{
|
|
struct v4l2_format *fmt;
|
|
struct v4l2_sliced_vbi_format *svbi;
|
|
int i;
|
|
|
|
fmt = arg;
|
|
if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
|
|
return -EINVAL;
|
|
svbi = &fmt->fmt.sliced;
|
|
if (svbi->service_set != 0) {
|
|
for (i = 0; i <= 23; i++) {
|
|
svbi->service_lines[1][i] = 0;
|
|
|
|
svbi->service_lines[0][i]=tvp5150_set_vbi(c,
|
|
vbi_ram_default,
|
|
svbi->service_lines[0][i],0xf0,i,3);
|
|
}
|
|
/* Enables FIFO */
|
|
tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,1);
|
|
} else {
|
|
/* Disables FIFO*/
|
|
tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,0);
|
|
|
|
/* Disable Full Field */
|
|
tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0);
|
|
|
|
/* Disable Line modes */
|
|
for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++)
|
|
tvp5150_write(c, i, 0xff);
|
|
}
|
|
break;
|
|
}
|
|
case VIDIOC_G_FMT:
|
|
{
|
|
struct v4l2_format *fmt;
|
|
struct v4l2_sliced_vbi_format *svbi;
|
|
|
|
int i, mask=0;
|
|
|
|
fmt = arg;
|
|
if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
|
|
return -EINVAL;
|
|
svbi = &fmt->fmt.sliced;
|
|
memset(svbi, 0, sizeof(*svbi));
|
|
|
|
for (i = 0; i <= 23; i++) {
|
|
svbi->service_lines[0][i]=tvp5150_get_vbi(c,
|
|
vbi_ram_default,i);
|
|
mask|=svbi->service_lines[0][i];
|
|
}
|
|
svbi->service_set=mask;
|
|
break;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
case VIDIOC_DBG_G_REGISTER:
|
|
case VIDIOC_DBG_S_REGISTER:
|
|
{
|
|
struct v4l2_register *reg = arg;
|
|
|
|
if (!v4l2_chip_match_i2c_client(c, reg->match_type, reg->match_chip))
|
|
return -EINVAL;
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
if (cmd == VIDIOC_DBG_G_REGISTER)
|
|
reg->val = tvp5150_read(c, reg->reg & 0xff);
|
|
else
|
|
tvp5150_write(c, reg->reg & 0xff, reg->val & 0xff);
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
case VIDIOC_LOG_STATUS:
|
|
dump_reg(c);
|
|
break;
|
|
|
|
case VIDIOC_G_TUNER:
|
|
{
|
|
struct v4l2_tuner *vt = arg;
|
|
int status = tvp5150_read(c, 0x88);
|
|
|
|
vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
|
|
break;
|
|
}
|
|
case VIDIOC_QUERYCTRL:
|
|
{
|
|
struct v4l2_queryctrl *qc = arg;
|
|
int i;
|
|
|
|
tvp5150_dbg(1, "VIDIOC_QUERYCTRL called\n");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tvp5150_qctrl); i++)
|
|
if (qc->id && qc->id == tvp5150_qctrl[i].id) {
|
|
memcpy(qc, &(tvp5150_qctrl[i]),
|
|
sizeof(*qc));
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
case VIDIOC_G_CTRL:
|
|
{
|
|
struct v4l2_control *ctrl = arg;
|
|
tvp5150_dbg(1, "VIDIOC_G_CTRL called\n");
|
|
|
|
return tvp5150_get_ctrl(c, ctrl);
|
|
}
|
|
case VIDIOC_S_CTRL:
|
|
{
|
|
struct v4l2_control *ctrl = arg;
|
|
u8 i, n;
|
|
n = ARRAY_SIZE(tvp5150_qctrl);
|
|
for (i = 0; i < n; i++)
|
|
if (ctrl->id == tvp5150_qctrl[i].id) {
|
|
if (ctrl->value <
|
|
tvp5150_qctrl[i].minimum
|
|
|| ctrl->value >
|
|
tvp5150_qctrl[i].maximum)
|
|
return -ERANGE;
|
|
tvp5150_dbg(1,
|
|
"VIDIOC_S_CTRL: id=%d, value=%d\n",
|
|
ctrl->id, ctrl->value);
|
|
return tvp5150_set_ctrl(c, ctrl);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/****************************************************************************
|
|
I2C Client & Driver
|
|
****************************************************************************/
|
|
static struct i2c_driver driver;
|
|
|
|
static struct i2c_client client_template = {
|
|
.name = "(unset)",
|
|
.driver = &driver,
|
|
};
|
|
|
|
static int tvp5150_detect_client(struct i2c_adapter *adapter,
|
|
int address, int kind)
|
|
{
|
|
struct i2c_client *c;
|
|
struct tvp5150 *core;
|
|
int rv;
|
|
|
|
if (debug)
|
|
printk( KERN_INFO
|
|
"tvp5150.c: detecting tvp5150 client on address 0x%x\n",
|
|
address << 1);
|
|
|
|
client_template.adapter = adapter;
|
|
client_template.addr = address;
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality
|
|
(adapter,
|
|
I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
|
|
return 0;
|
|
|
|
c = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
|
|
if (!c)
|
|
return -ENOMEM;
|
|
memcpy(c, &client_template, sizeof(struct i2c_client));
|
|
|
|
core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
|
|
if (!core) {
|
|
kfree(c);
|
|
return -ENOMEM;
|
|
}
|
|
i2c_set_clientdata(c, core);
|
|
|
|
rv = i2c_attach_client(c);
|
|
|
|
core->norm = V4L2_STD_ALL; /* Default is autodetect */
|
|
core->route.input = TVP5150_COMPOSITE1;
|
|
core->enable = 1;
|
|
core->bright = 128;
|
|
core->contrast = 128;
|
|
core->hue = 0;
|
|
core->sat = 128;
|
|
|
|
if (rv) {
|
|
kfree(c);
|
|
kfree(core);
|
|
return rv;
|
|
}
|
|
|
|
if (debug > 1)
|
|
dump_reg(c);
|
|
return 0;
|
|
}
|
|
|
|
static int tvp5150_attach_adapter(struct i2c_adapter *adapter)
|
|
{
|
|
if (debug)
|
|
printk( KERN_INFO
|
|
"tvp5150.c: starting probe for adapter %s (0x%x)\n",
|
|
adapter->name, adapter->id);
|
|
return i2c_probe(adapter, &addr_data, &tvp5150_detect_client);
|
|
}
|
|
|
|
static int tvp5150_detach_client(struct i2c_client *c)
|
|
{
|
|
struct tvp5150 *decoder = i2c_get_clientdata(c);
|
|
int err;
|
|
|
|
tvp5150_dbg(1,
|
|
"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
|
|
c->addr << 1);
|
|
|
|
err = i2c_detach_client(c);
|
|
if (err) {
|
|
return err;
|
|
}
|
|
|
|
kfree(decoder);
|
|
kfree(c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static struct i2c_driver driver = {
|
|
.driver = {
|
|
.name = "tvp5150",
|
|
},
|
|
.id = I2C_DRIVERID_TVP5150,
|
|
|
|
.attach_adapter = tvp5150_attach_adapter,
|
|
.detach_client = tvp5150_detach_client,
|
|
|
|
.command = tvp5150_command,
|
|
};
|
|
|
|
static int __init tvp5150_init(void)
|
|
{
|
|
return i2c_add_driver(&driver);
|
|
}
|
|
|
|
static void __exit tvp5150_exit(void)
|
|
{
|
|
i2c_del_driver(&driver);
|
|
}
|
|
|
|
module_init(tvp5150_init);
|
|
module_exit(tvp5150_exit);
|