lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a0e90ad8ce
android_kernel_xiaomi_sm8350/arch/m68k/include/asm/m5206sim.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

159 lines
6.4 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/****************************************************************************/
/*
* m5206sim.h -- ColdFire 5206 System Integration Module support.
*
* (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2000, Lineo Inc. (www.lineo.com)
*/
/****************************************************************************/
#ifndef m5206sim_h
#define m5206sim_h
/****************************************************************************/
#define CPU_NAME "COLDFIRE(m5206)"
#define CPU_INSTR_PER_JIFFY 3
#define MCF_BUSCLK MCF_CLK
#include <asm/m52xxacr.h>
/*
* Define the 5206 SIM register set addresses.
*/
#define MCFSIM_SIMR (MCF_MBAR + 0x03) /* SIM Config reg */
#define MCFSIM_ICR1 (MCF_MBAR + 0x14) /* Intr Ctrl reg 1 */
#define MCFSIM_ICR2 (MCF_MBAR + 0x15) /* Intr Ctrl reg 2 */
#define MCFSIM_ICR3 (MCF_MBAR + 0x16) /* Intr Ctrl reg 3 */
#define MCFSIM_ICR4 (MCF_MBAR + 0x17) /* Intr Ctrl reg 4 */
#define MCFSIM_ICR5 (MCF_MBAR + 0x18) /* Intr Ctrl reg 5 */
#define MCFSIM_ICR6 (MCF_MBAR + 0x19) /* Intr Ctrl reg 6 */
#define MCFSIM_ICR7 (MCF_MBAR + 0x1a) /* Intr Ctrl reg 7 */
#define MCFSIM_ICR8 (MCF_MBAR + 0x1b) /* Intr Ctrl reg 8 */
#define MCFSIM_ICR9 (MCF_MBAR + 0x1c) /* Intr Ctrl reg 9 */
#define MCFSIM_ICR10 (MCF_MBAR + 0x1d) /* Intr Ctrl reg 10 */
#define MCFSIM_ICR11 (MCF_MBAR + 0x1e) /* Intr Ctrl reg 11 */
#define MCFSIM_ICR12 (MCF_MBAR + 0x1f) /* Intr Ctrl reg 12 */
#define MCFSIM_ICR13 (MCF_MBAR + 0x20) /* Intr Ctrl reg 13 */
#ifdef CONFIG_M5206e
#define MCFSIM_ICR14 (MCF_MBAR + 0x21) /* Intr Ctrl reg 14 */
#define MCFSIM_ICR15 (MCF_MBAR + 0x22) /* Intr Ctrl reg 15 */
#endif
#define MCFSIM_IMR (MCF_MBAR + 0x36) /* Interrupt Mask */
#define MCFSIM_IPR (MCF_MBAR + 0x3a) /* Interrupt Pending */
#define MCFSIM_RSR (MCF_MBAR + 0x40) /* Reset Status */
#define MCFSIM_SYPCR (MCF_MBAR + 0x41) /* System Protection */
#define MCFSIM_SWIVR (MCF_MBAR + 0x42) /* SW Watchdog intr */
#define MCFSIM_SWSR (MCF_MBAR + 0x43) /* SW Watchdog srv */
#define MCFSIM_DCRR (MCF_MBAR + 0x46) /* DRAM Refresh reg (r/w) */
#define MCFSIM_DCTR (MCF_MBAR + 0x4a) /* DRAM Timing reg (r/w) */
#define MCFSIM_DAR0 (MCF_MBAR + 0x4c) /* DRAM 0 Address reg(r/w) */
#define MCFSIM_DMR0 (MCF_MBAR + 0x50) /* DRAM 0 Mask reg (r/w) */
#define MCFSIM_DCR0 (MCF_MBAR + 0x57) /* DRAM 0 Control reg (r/w) */
#define MCFSIM_DAR1 (MCF_MBAR + 0x58) /* DRAM 1 Address reg (r/w) */
#define MCFSIM_DMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control reg (r/w) */
#define MCFSIM_CSAR0 (MCF_MBAR + 0x64) /* CS 0 Address reg */
#define MCFSIM_CSMR0 (MCF_MBAR + 0x68) /* CS 0 Mask reg */
#define MCFSIM_CSCR0 (MCF_MBAR + 0x6e) /* CS 0 Control reg */
#define MCFSIM_CSAR1 (MCF_MBAR + 0x70) /* CS 1 Address reg */
#define MCFSIM_CSMR1 (MCF_MBAR + 0x74) /* CS 1 Mask reg */
#define MCFSIM_CSCR1 (MCF_MBAR + 0x7a) /* CS 1 Control reg */
#define MCFSIM_CSAR2 (MCF_MBAR + 0x7c) /* CS 2 Address reg */
#define MCFSIM_CSMR2 (MCF_MBAR + 0x80) /* CS 2 Mask reg */
#define MCFSIM_CSCR2 (MCF_MBAR + 0x86) /* CS 2 Control reg */
#define MCFSIM_CSAR3 (MCF_MBAR + 0x88) /* CS 3 Address reg */
#define MCFSIM_CSMR3 (MCF_MBAR + 0x8c) /* CS 3 Mask reg */
#define MCFSIM_CSCR3 (MCF_MBAR + 0x92) /* CS 3 Control reg */
#define MCFSIM_CSAR4 (MCF_MBAR + 0x94) /* CS 4 Address reg */
#define MCFSIM_CSMR4 (MCF_MBAR + 0x98) /* CS 4 Mask reg */
#define MCFSIM_CSCR4 (MCF_MBAR + 0x9e) /* CS 4 Control reg */
#define MCFSIM_CSAR5 (MCF_MBAR + 0xa0) /* CS 5 Address reg */
#define MCFSIM_CSMR5 (MCF_MBAR + 0xa4) /* CS 5 Mask reg */
#define MCFSIM_CSCR5 (MCF_MBAR + 0xaa) /* CS 5 Control reg */
#define MCFSIM_CSAR6 (MCF_MBAR + 0xac) /* CS 6 Address reg */
#define MCFSIM_CSMR6 (MCF_MBAR + 0xb0) /* CS 6 Mask reg */
#define MCFSIM_CSCR6 (MCF_MBAR + 0xb6) /* CS 6 Control reg */
#define MCFSIM_CSAR7 (MCF_MBAR + 0xb8) /* CS 7 Address reg */
#define MCFSIM_CSMR7 (MCF_MBAR + 0xbc) /* CS 7 Mask reg */
#define MCFSIM_CSCR7 (MCF_MBAR + 0xc2) /* CS 7 Control reg */
#define MCFSIM_DMCR (MCF_MBAR + 0xc6) /* Default control */
#ifdef CONFIG_M5206e
#define MCFSIM_PAR (MCF_MBAR + 0xca) /* Pin Assignment */
#else
#define MCFSIM_PAR (MCF_MBAR + 0xcb) /* Pin Assignment */
#endif
#define MCFTIMER_BASE1 (MCF_MBAR + 0x100) /* Base of TIMER1 */
#define MCFTIMER_BASE2 (MCF_MBAR + 0x120) /* Base of TIMER2 */
#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
#define MCFDMA_BASE0 (MCF_MBAR + 0x200) /* Base address DMA 0 */
#define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */
#if defined(CONFIG_NETtel)
#define MCFUART_BASE0 (MCF_MBAR + 0x180) /* Base address UART0 */
#define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
#else
#define MCFUART_BASE0 (MCF_MBAR + 0x140) /* Base address UART0 */
#define MCFUART_BASE1 (MCF_MBAR + 0x180) /* Base address UART1 */
#endif
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_I2C0 29 /* I2C, Level 5 */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/*
* Generic GPIO
*/
#define MCFGPIO_PIN_MAX 8
#define MCFGPIO_IRQ_VECBASE -1
#define MCFGPIO_IRQ_MAX -1
/*
* Some symbol defines for the Parallel Port Pin Assignment Register
*/
#ifdef CONFIG_M5206e
#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */
/* Clear to select T0 input */
#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */
/* Clear to select T0 output */
#endif
/*
* Some symbol defines for the Interrupt Control Register
*/
#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */
#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */
#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */
#define MCFSIM_I2CICR MCFSIM_ICR11 /* I2C ICR */
#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */
#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */
#ifdef CONFIG_M5206e
#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */
#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
#endif
/*
* I2C Controller
*/
#define MCFI2C_BASE0 (MCF_MBAR + 0x1e0)
#define MCFI2C_SIZE0 0x40
/****************************************************************************/
#endif /* m5206sim_h */
Reference in New Issue View Git Blame Copy Permalink