android_kernel_xiaomi_sm8350/drivers/firmware/arm_scmi/sensors.c
Sudeep Holla 6937c143e3 firmware: arm_scmi: Add missing Rx size re-initialisation
[ Upstream commit 9724722fde8f9bbd2b87340f00b9300c9284001e ]

Few commands provide the list of description partially and require
to be called consecutively until all the descriptors are fetched
completely. In such cases, we don't release the buffers and reuse
them for consecutive transmits.

However, currently we don't reset the Rx size which will be set as
per the response for the last transmit. This may result in incorrect
response size being interpretted as the firmware may repond with size
greater than the one set but we read only upto the size set by previous
response.

Let us reset the receive buffer size to max possible in such cases as
we don't know the exact size of the response.

Link:  https://lore.kernel.org/r/20201012141746.32575-1-sudeep.holla@arm.com
Fixes: b6f20ff8bd ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Reported-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05 11:43:12 +01:00

311 lines
7.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* System Control and Management Interface (SCMI) Sensor Protocol
*
* Copyright (C) 2018 ARM Ltd.
*/
#include "common.h"
enum scmi_sensor_protocol_cmd {
SENSOR_DESCRIPTION_GET = 0x3,
SENSOR_TRIP_POINT_NOTIFY = 0x4,
SENSOR_TRIP_POINT_CONFIG = 0x5,
SENSOR_READING_GET = 0x6,
};
struct scmi_msg_resp_sensor_attributes {
__le16 num_sensors;
u8 max_requests;
u8 reserved;
__le32 reg_addr_low;
__le32 reg_addr_high;
__le32 reg_size;
};
struct scmi_msg_resp_sensor_description {
__le16 num_returned;
__le16 num_remaining;
struct {
__le32 id;
__le32 attributes_low;
#define SUPPORTS_ASYNC_READ(x) ((x) & BIT(31))
#define NUM_TRIP_POINTS(x) ((x) & 0xff)
__le32 attributes_high;
#define SENSOR_TYPE(x) ((x) & 0xff)
#define SENSOR_SCALE(x) (((x) >> 11) & 0x1f)
#define SENSOR_SCALE_SIGN BIT(4)
#define SENSOR_SCALE_EXTEND GENMASK(7, 5)
#define SENSOR_UPDATE_SCALE(x) (((x) >> 22) & 0x1f)
#define SENSOR_UPDATE_BASE(x) (((x) >> 27) & 0x1f)
u8 name[SCMI_MAX_STR_SIZE];
} desc[0];
};
struct scmi_msg_sensor_trip_point_notify {
__le32 id;
__le32 event_control;
#define SENSOR_TP_NOTIFY_ALL BIT(0)
};
struct scmi_msg_set_sensor_trip_point {
__le32 id;
__le32 event_control;
#define SENSOR_TP_EVENT_MASK (0x3)
#define SENSOR_TP_DISABLED 0x0
#define SENSOR_TP_POSITIVE 0x1
#define SENSOR_TP_NEGATIVE 0x2
#define SENSOR_TP_BOTH 0x3
#define SENSOR_TP_ID(x) (((x) & 0xff) << 4)
__le32 value_low;
__le32 value_high;
};
struct scmi_msg_sensor_reading_get {
__le32 id;
__le32 flags;
#define SENSOR_READ_ASYNC BIT(0)
};
struct sensors_info {
int num_sensors;
int max_requests;
u64 reg_addr;
u32 reg_size;
struct scmi_sensor_info *sensors;
};
static int scmi_sensor_attributes_get(const struct scmi_handle *handle,
struct sensors_info *si)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_resp_sensor_attributes *attr;
ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
SCMI_PROTOCOL_SENSOR, 0, sizeof(*attr), &t);
if (ret)
return ret;
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
if (!ret) {
si->num_sensors = le16_to_cpu(attr->num_sensors);
si->max_requests = attr->max_requests;
si->reg_addr = le32_to_cpu(attr->reg_addr_low) |
(u64)le32_to_cpu(attr->reg_addr_high) << 32;
si->reg_size = le32_to_cpu(attr->reg_size);
}
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_sensor_description_get(const struct scmi_handle *handle,
struct sensors_info *si)
{
int ret, cnt;
u32 desc_index = 0;
u16 num_returned, num_remaining;
struct scmi_xfer *t;
struct scmi_msg_resp_sensor_description *buf;
ret = scmi_xfer_get_init(handle, SENSOR_DESCRIPTION_GET,
SCMI_PROTOCOL_SENSOR, sizeof(__le32), 0, &t);
if (ret)
return ret;
buf = t->rx.buf;
do {
/* Set the number of sensors to be skipped/already read */
put_unaligned_le32(desc_index, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (ret)
break;
num_returned = le16_to_cpu(buf->num_returned);
num_remaining = le16_to_cpu(buf->num_remaining);
if (desc_index + num_returned > si->num_sensors) {
dev_err(handle->dev, "No. of sensors can't exceed %d",
si->num_sensors);
break;
}
for (cnt = 0; cnt < num_returned; cnt++) {
u32 attrh, attrl;
struct scmi_sensor_info *s;
attrl = le32_to_cpu(buf->desc[cnt].attributes_low);
attrh = le32_to_cpu(buf->desc[cnt].attributes_high);
s = &si->sensors[desc_index + cnt];
s->id = le32_to_cpu(buf->desc[cnt].id);
s->type = SENSOR_TYPE(attrh);
s->scale = SENSOR_SCALE(attrh);
/* Sign extend to a full s8 */
if (s->scale & SENSOR_SCALE_SIGN)
s->scale |= SENSOR_SCALE_EXTEND;
s->async = SUPPORTS_ASYNC_READ(attrl);
s->num_trip_points = NUM_TRIP_POINTS(attrl);
strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
}
desc_index += num_returned;
scmi_reset_rx_to_maxsz(handle, t);
/*
* check for both returned and remaining to avoid infinite
* loop due to buggy firmware
*/
} while (num_returned && num_remaining);
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
u32 sensor_id, bool enable)
{
int ret;
u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0;
struct scmi_xfer *t;
struct scmi_msg_sensor_trip_point_notify *cfg;
ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY,
SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
if (ret)
return ret;
cfg = t->tx.buf;
cfg->id = cpu_to_le32(sensor_id);
cfg->event_control = cpu_to_le32(evt_cntl);
ret = scmi_do_xfer(handle, t);
scmi_xfer_put(handle, t);
return ret;
}
static int
scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
u8 trip_id, u64 trip_value)
{
int ret;
u32 evt_cntl = SENSOR_TP_BOTH;
struct scmi_xfer *t;
struct scmi_msg_set_sensor_trip_point *trip;
ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_CONFIG,
SCMI_PROTOCOL_SENSOR, sizeof(*trip), 0, &t);
if (ret)
return ret;
trip = t->tx.buf;
trip->id = cpu_to_le32(sensor_id);
trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id));
trip->value_low = cpu_to_le32(trip_value & 0xffffffff);
trip->value_high = cpu_to_le32(trip_value >> 32);
ret = scmi_do_xfer(handle, t);
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_sensor_reading_get(const struct scmi_handle *handle,
u32 sensor_id, u64 *value)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_reading_get *sensor;
struct sensors_info *si = handle->sensor_priv;
struct scmi_sensor_info *s = si->sensors + sensor_id;
ret = scmi_xfer_get_init(handle, SENSOR_READING_GET,
SCMI_PROTOCOL_SENSOR, sizeof(*sensor),
sizeof(u64), &t);
if (ret)
return ret;
sensor = t->tx.buf;
sensor->id = cpu_to_le32(sensor_id);
if (s->async) {
sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
ret = scmi_do_xfer_with_response(handle, t);
if (!ret)
*value = get_unaligned_le64((void *)
((__le32 *)t->rx.buf + 1));
} else {
sensor->flags = cpu_to_le32(0);
ret = scmi_do_xfer(handle, t);
if (!ret)
*value = get_unaligned_le64(t->rx.buf);
}
scmi_xfer_put(handle, t);
return ret;
}
static const struct scmi_sensor_info *
scmi_sensor_info_get(const struct scmi_handle *handle, u32 sensor_id)
{
struct sensors_info *si = handle->sensor_priv;
return si->sensors + sensor_id;
}
static int scmi_sensor_count_get(const struct scmi_handle *handle)
{
struct sensors_info *si = handle->sensor_priv;
return si->num_sensors;
}
static struct scmi_sensor_ops sensor_ops = {
.count_get = scmi_sensor_count_get,
.info_get = scmi_sensor_info_get,
.trip_point_notify = scmi_sensor_trip_point_notify,
.trip_point_config = scmi_sensor_trip_point_config,
.reading_get = scmi_sensor_reading_get,
};
static int scmi_sensors_protocol_init(struct scmi_handle *handle)
{
u32 version;
struct sensors_info *sinfo;
scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version);
dev_dbg(handle->dev, "Sensor Version %d.%d\n",
PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
sinfo = devm_kzalloc(handle->dev, sizeof(*sinfo), GFP_KERNEL);
if (!sinfo)
return -ENOMEM;
scmi_sensor_attributes_get(handle, sinfo);
sinfo->sensors = devm_kcalloc(handle->dev, sinfo->num_sensors,
sizeof(*sinfo->sensors), GFP_KERNEL);
if (!sinfo->sensors)
return -ENOMEM;
scmi_sensor_description_get(handle, sinfo);
handle->sensor_ops = &sensor_ops;
handle->sensor_priv = sinfo;
return 0;
}
static int __init scmi_sensors_init(void)
{
return scmi_protocol_register(SCMI_PROTOCOL_SENSOR,
&scmi_sensors_protocol_init);
}
subsys_initcall(scmi_sensors_init);