* remotes/origin/tmp-f686d9f:
ANDROID: update abi_gki_aarch64.xml for 5.2-rc6
Linux 5.2-rc6
Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
Bluetooth: Fix regression with minimum encryption key size alignment
tcp: refine memory limit test in tcp_fragment()
x86/vdso: Prevent segfaults due to hoisted vclock reads
SUNRPC: Fix a credential refcount leak
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
net :sunrpc :clnt :Fix xps refcount imbalance on the error path
NFS4: Only set creation opendata if O_CREAT
ANDROID: gki_defconfig: workaround to enable configs
ANDROID: gki_defconfig: more configs for partners
ARM: 8867/1: vdso: pass --be8 to linker if necessary
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
habanalabs: use u64_to_user_ptr() for reading user pointers
nfsd: replace Jeff by Chuck as nfsd co-maintainer
inet: clear num_timeout reqsk_alloc()
PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
net/af_iucv: build proper skbs for HiperTransport
net/af_iucv: remove GFP_DMA restriction for HiperTransport
doc: fix documentation about UIO_MEM_LOGICAL using
MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk
docs: fb: Add TER16x32 to the available font names
MAINTAINERS: fpga: hand off maintainership to Moritz
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 484
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 481
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 480
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 479
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 477
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 475
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 474
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 473
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 472
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 471
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 469
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 468
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 467
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 466
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 465
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 464
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 463
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 462
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 461
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 460
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 457
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 456
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 455
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 454
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 452
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 451
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 250
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 248
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 247
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 246
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 245
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 244
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 243
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 239
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 238
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 237
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 232
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 231
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 230
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 226
KVM: arm/arm64: Fix emulated ptimer irq injection
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
tests: kvm: Check for a kernel warning
kvm: tests: Sort tests in the Makefile alphabetically
KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT
KVM: x86: Modify struct kvm_nested_state to have explicit fields for data
fanotify: update connector fsid cache on add mark
quota: fix a problem about transfer quota
drm/i915: Don't clobber M/N values during fastset check
powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
ovl: make i_ino consistent with st_ino in more cases
scsi: qla2xxx: Fix hardlockup in abort command during driver remove
scsi: ufs: Avoid runtime suspend possibly being blocked forever
scsi: qedi: update driver version to 8.37.0.20
scsi: qedi: Check targetname while finding boot target information
hvsock: fix epollout hang from race condition
net/udp_gso: Allow TX timestamp with UDP GSO
net: netem: fix use after free and double free with packet corruption
net: netem: fix backlog accounting for corrupted GSO frames
net: lio_core: fix potential sign-extension overflow on large shift
tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
apparmor: reset pos on failure to unpack for various functions
apparmor: enforce nullbyte at end of tag string
apparmor: fix PROFILE_MEDIATES for untrusted input
RDMA/efa: Handle mmap insertions overflow
tun: wake up waitqueues after IFF_UP is set
drm: return -EFAULT if copy_to_user() fails
net: remove duplicate fetch in sock_getsockopt
tipc: fix issues with early FAILOVER_MSG from peer
bnx2x: Check if transceiver implements DDM before access
xhci: detect USB 3.2 capable host controllers correctly
usb: xhci: Don't try to recover an endpoint if port is in error state.
KVM: fix typo in documentation
drm/panfrost: Make sure a BO is only unmapped when appropriate
md: fix for divide error in status_resync
soc: ixp4xx: npe: Fix an IS_ERR() vs NULL check in probe
arm64/mm: don't initialize pgd_cache twice
MAINTAINERS: Update my email address
arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>
ovl: fix typo in MODULE_PARM_DESC
ovl: fix bogus -Wmaybe-unitialized warning
ovl: don't fail with disconnected lower NFS
mmc: core: Prevent processing SDIO IRQs when the card is suspended
mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
brcmfmac: sdio: Don't tune while the card is off
mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
brcmfmac: sdio: Disable auto-tuning around commands expected to fail
mmc: core: API to temporarily disable retuning for SDIO CRC errors
Revert "brcmfmac: disable command decode in sdio_aos"
ARM: ixp4xx: include irqs.h where needed
ARM: ixp4xx: mark ixp4xx_irq_setup as __init
ARM: ixp4xx: don't select SERIAL_OF_PLATFORM
firmware: trusted_foundations: add ARMv7 dependency
usb: dwc2: Use generic PHY width in params setup
RDMA/efa: Fix success return value in case of error
IB/hfi1: Handle port down properly in pio
IB/hfi1: Handle wakeup of orphaned QPs for pio
IB/hfi1: Wakeup QPs orphaned on wait list after flush
IB/hfi1: Use aborts to trigger RC throttling
IB/hfi1: Create inline to get extended headers
IB/hfi1: Silence txreq allocation warnings
IB/hfi1: Avoid hardlockup with flushlist_lock
KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode
KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()
fs/namespace: fix unprivileged mount propagation
vfs: fsmount: add missing mntget()
cifs: fix GlobalMid_Lock bug in cifs_reconnect
SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write
staging: erofs: add requirements field in superblock
arm64: ssbd: explicitly depend on <linux/prctl.h>
block: fix page leak when merging to same page
block: return from __bio_try_merge_page if merging occured in the same page
Btrfs: fix failure to persist compression property xattr deletion on fsync
riscv: remove unused barrier defines
usb: chipidea: udc: workaround for endpoint conflict issue
MAINTAINERS: Change QCOM repo location
mmc: mediatek: fix SDIO IRQ detection issue
mmc: mediatek: fix SDIO IRQ interrupt handle flow
mmc: core: complete HS400 before checking status
riscv: mm: synchronize MMU after pte change
MAINTAINERS: Update my email address to use @kernel.org
ANDROID: update abi_gki_aarch64.xml for 5.2-rc5
riscv: dts: add initial board data for the SiFive HiFive Unleashed
riscv: dts: add initial support for the SiFive FU540-C000 SoC
dt-bindings: riscv: convert cpu binding to json-schema
dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540
arch: riscv: add support for building DTB files from DT source data
drm/i915/gvt: ignore unexpected pvinfo write
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
Linux 5.2-rc5
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
powerpc/32: fix build failure on book3e with KVM
powerpc/booke: fix fast syscall entry on SMP
powerpc/32s: fix initial setup of segment registers on secondary CPU
x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
tcp: add tcp_rx_skb_cache sysctl
sysctl: define proc_do_static_key()
hv_netvsc: Set probe mode to sync
net: sched: flower: don't call synchronize_rcu() on mask creation
net: dsa: fix warning same module names
sctp: Free cookie before we memdup a new one
net: dsa: microchip: Don't try to read stats for unused ports
qmi_wwan: extend permitted QMAP mux_id value range
qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode
qmi_wwan: add network device usage statistics for qmimux devices
qmi_wwan: add support for QMAP padding in the RX path
bpf, x64: fix stack layout of JITed bpf code
Smack: Restore the smackfsdef mount option and add missing prefixes
bpf, devmap: Add missing RCU read lock on flush
bpf, devmap: Add missing bulk queue free
bpf, devmap: Fix premature entry free on destroying map
ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()
module: Fix livepatch/ftrace module text permissions race
tracing/uprobe: Fix obsolete comment on trace_uprobe_create()
tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()
tracing: Make two symbols static
tracing: avoid build warning with HAVE_NOP_MCOUNT
tracing: Fix out-of-range read in trace_stack_print()
gfs2: Fix rounding error in gfs2_iomap_page_prepare
net: phylink: further mac_config documentation improvements
nfc: Ensure presence of required attributes in the deactivate_target handler
btrfs: start readahead also in seed devices
x86/kasan: Fix boot with 5-level paging and KASAN
cfg80211: report measurement start TSF correctly
cfg80211: fix memory leak of wiphy device name
cfg80211: util: fix bit count off by one
mac80211: do not start any work during reconfigure flow
cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data()
mac80211: only warn once on chanctx_conf being NULL
mac80211: drop robust management frames from unknown TA
gpu: ipu-v3: image-convert: Fix image downsize coefficients
gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats
gpu: ipu-v3: image-convert: Fix input bytesperline width/height align
thunderbolt: Implement CIO reset correctly for Titan Ridge
ARM: davinci: da8xx: specify dma_coherent_mask for lcdc
ARM: davinci: da850-evm: call regulator_has_full_constraints()
timekeeping: Repair ktime_get_coarse*() granularity
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
ANDROID: update abi_gki_aarch64.xml
mm/devm_memremap_pages: fix final page put race
PCI/P2PDMA: track pgmap references per resource, not globally
lib/genalloc: introduce chunk owners
PCI/P2PDMA: fix the gen_pool_add_virt() failure path
mm/devm_memremap_pages: introduce devm_memunmap_pages
drivers/base/devres: introduce devm_release_action()
mm/vmscan.c: fix trying to reclaim unevictable LRU page
coredump: fix race condition between collapse_huge_page() and core dumping
mm/mlock.c: change count_mm_mlocked_page_nr return type
mm: mmu_gather: remove __tlb_reset_range() for force flush
fs/ocfs2: fix race in ocfs2_dentry_attach_lock()
mm/vmscan.c: fix recent_rotated history
mm/mlock.c: mlockall error for flag MCL_ONFAULT
scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE
mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node
mm: memcontrol: don't batch updates of local VM stats and events
PCI: PM: Skip devices in D0 for suspend-to-idle
ANDROID: Removed extraneous configs from gki
powerpc/bpf: use unsigned division instruction for 64-bit operations
bpf: fix div64 overflow tests to properly detect errors
bpf: sync BPF_FIB_LOOKUP flag changes with BPF uapi
bpf: simplify definition of BPF_FIB_LOOKUP related flags
cifs: add spinlock for the openFileList to cifsInodeInfo
cifs: fix panic in smb2_reconnect
x86/fpu: Don't use current->mm to check for a kthread
KVM: nVMX: use correct clean fields when copying from eVMCS
vfio-ccw: Destroy kmem cache region on module exit
block/ps3vram: Use %llu to format sector_t after LBDAF removal
libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk
bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached
bcache: fix stack corruption by PRECEDING_KEY()
arm64/sve: Fix missing SVE/FPSIMD endianness conversions
blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests
blkio-controller.txt: Remove references to CFQ
block/switching-sched.txt: Update to blk-mq schedulers
null_blk: remove duplicate check for report zone
blk-mq: no need to check return value of debugfs_create functions
io_uring: fix memory leak of UNIX domain socket inode
block: force select mq-deadline for zoned block devices
binder: fix possible UAF when freeing buffer
drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware
drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported()
ANDROID: x86 gki_defconfig: enable DMA_CMA
ANDROID: Fixed x86 regression
ANDROID: gki_defconfig: enable DMA_CMA
Input: synaptics - enable SMBus on ThinkPad E480 and E580
net: mvpp2: prs: Use the correct helpers when removing all VID filters
net: mvpp2: prs: Fix parser range for VID filtering
mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed
mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2
selftests: tc_flower: Add TOS matching test
mlxsw: spectrum_flower: Fix TOS matching
selftests: mlxsw: Test nexthop offload indication
mlxsw: spectrum_router: Refresh nexthop neighbour when it becomes dead
mlxsw: spectrum: Use different seeds for ECMP and LAG hash
net: tls, correctly account for copied bytes with multiple sk_msgs
vrf: Increment Icmp6InMsgs on the original netdev
cpuset: restore sanity to cpuset_cpus_allowed_fallback()
net: ethtool: Allow matching on vlan DEI bit
linux-next: DOC: RDS: Fix a typo in rds.txt
x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
mpls: fix af_mpls dependencies for real
selinux: fix a missing-check bug in selinux_sb_eat_lsm_opts()
selinux: fix a missing-check bug in selinux_add_mnt_opt( )
arm64: tlbflush: Ensure start/end of address range are aligned to stride
usb: typec: Make sure an alt mode exist before getting its partner
KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy
KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST
KVM: arm64: Implement vq_present() as a macro
xdp: check device pointer before clearing
bpf: net: Set sk_bpf_storage back to NULL for cloned sk
Btrfs: fix race between block group removal and block group allocation
clocksource/drivers/arm_arch_timer: Don't trace count reader functions
i2c: pca-platform: Fix GPIO lookup code
thunderbolt: Make sure device runtime resume completes before taking domain lock
drm: add fallback override/firmware EDID modes workaround
i2c: acorn: fix i2c warning
arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGS
drm/edid: abstract override/firmware EDID retrieval
platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
platform/x86: intel-vbtn: Report switch events when event wakes device
platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog
x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
x86/resctrl: Don't stop walking closids when a locksetup group is found
iommu/arm-smmu: Avoid constant zero in TLBI writes
drm/i915/perf: fix whitelist on Gen10+
drm/i915/sdvo: Implement proper HDMI audio support for SDVO
drm/i915: Fix per-pixel alpha with CCS
drm/i915/dmc: protect against reading random memory
drm/i915/dsi: Use a fuzzy check for burst mode clock check
Input: imx_keypad - make sure keyboard can always wake up system
selinux: log raw contexts as untrusted strings
ptrace: restore smp_rmb() in __ptrace_may_access()
IB/hfi1: Correct tid qp rcd to match verbs context
IB/hfi1: Close PSM sdma_progress sleep window
IB/hfi1: Validate fault injection opcode user input
geneve: Don't assume linear buffers in error handler
vxlan: Don't assume linear buffers in error handler
net: openvswitch: do not free vport if register_netdevice() is failed.
net: correct udp zerocopy refcnt also when zerocopy only on append
drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc
ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctls
riscv: Fix udelay in RV32.
drm/vmwgfx: fix a warning due to missing dma_parms
riscv: export pm_power_off again
drm/vmwgfx: Honor the sg list segment size limitation
RISC-V: defconfig: enable clocks, serial console
drm/vmwgfx: Use the backdoor port if the HB port is not available
bpf: lpm_trie: check left child of last leftmost node for NULL
Revert "fuse: require /dev/fuse reads to have enough buffer capacity"
ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)
ALSA: oxfw: allow PCM capture for Stanton SCS.1m
ALSA: firewire-motu: fix destruction of data for isochronous resources
s390/ctl_reg: mark __ctl_set_bit and __ctl_clear_bit as __always_inline
s390/boot: disable address-of-packed-member warning
ANDROID: update gki aarch64 ABI representation
cgroup: Fix css_task_iter_advance_css_set() cset skip condition
drm/panfrost: Require the simple_ondemand governor
drm/panfrost: make devfreq optional again
drm/gem_shmem: Use a writecombine mapping for ->vaddr
mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H
ASoC: Intel: sst: fix kmalloc call with wrong flags
ASoC: core: Fix deadlock in snd_soc_instantiate_card()
cgroup/bfq: revert bfq.weight symlink change
ARM: dts: am335x phytec boards: Fix cd-gpios active level
ARM: dts: dra72x: Disable usb4_tm target module
nfp: ensure skb network header is set for packet redirect
tcp: fix undo spurious SYNACK in passive Fast Open
mpls: fix af_mpls dependencies
ibmvnic: Fix unchecked return codes of memory allocations
ibmvnic: Refresh device multicast list after reset
ibmvnic: Do not close unopened driver during reset
mpls: fix warning with multi-label encap
net: phy: rename Asix Electronics PHY driver
ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero
net: ipv4: fib_semantics: fix uninitialized variable
Input: iqs5xx - get axis info before calling input_mt_init_slots()
Linux 5.2-rc4
drm: panel-orientation-quirks: Add quirk for GPD MicroPC
drm: panel-orientation-quirks: Add quirk for GPD pocket2
counter/ftm-quaddec: Add missing dependencies in Kconfig
staging: iio: adt7316: Fix build errors when GPIOLIB is not set
x86/fpu: Update kernel's FPU state before using for the fsave header
MAINTAINERS: Karthikeyan Ramasubramanian is MIA
i2c: xiic: Add max_read_len quirk
ANDROID: update ABI representation
gpio: pca953x: hack to fix 24 bit gpio expanders
net/mlx5e: Support tagged tunnel over bond
net/mlx5e: Avoid detaching non-existing netdev under switchdev mode
net/mlx5e: Fix source port matching in fdb peer flow rule
net/mlx5e: Replace reciprocal_scale in TX select queue function
net/mlx5e: Add ndo_set_feature for uplink representor
net/mlx5: Avoid reloading already removed devices
net/mlx5: Update pci error handler entries and command translation
RAS/CEC: Convert the timer callback to a workqueue
RAS/CEC: Fix binary search function
x86/mm/KASLR: Compute the size of the vmemmap section properly
can: purge socket error queue on sock destruct
can: flexcan: Remove unneeded registration message
can: af_can: Fix error path of can_init()
can: m_can: implement errata "Needless activation of MRAF irq"
can: mcp251x: add support for mcp25625
dt-bindings: can: mcp251x: add mcp25625 support
can: xilinx_can: use correct bittiming_const for CAN FD core
can: flexcan: fix timeout when set small bitrate
can: usb: Kconfig: Remove duplicate menu entry
lockref: Limit number of cmpxchg loop retries
uaccess: add noop untagged_addr definition
x86/insn-eval: Fix use-after-free access to LDT entry
kbuild: use more portable 'command -v' for cc-cross-prefix
s390/unwind: correct stack switching during unwind
scsi: hpsa: correct ioaccel2 chaining
btrfs: Always trim all unallocated space in btrfs_trim_free_extents
netfilter: ipv6: nf_defrag: accept duplicate fragments again
powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX
drm/meson: fix G12A primary plane disabling
drm/meson: fix primary plane disabling
drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations
block, bfq: add weight symlink to the bfq.weight cgroup parameter
cgroup: let a symlink too be created with a cftype file
powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate()
powerpc/64s: Fix THP PMD collapse serialisation
powerpc: Fix kexec failure on book3s/32
drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
drm/nouveau/secboot: split out FW version-specific LS function pointers
drm/nouveau/secboot: pass max supported FW version to LS load funcs
drm/nouveau/core: support versioned firmware loading
drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
block: free sched's request pool in blk_cleanup_queue
bpf: expand section tests for test_section_names
bpf: more msg_name rewrite tests to test_sock_addr
bpf, bpftool: enable recvmsg attach types
bpf, libbpf: enable recvmsg attach types
bpf: sync tooling uapi header
bpf: fix unconnected udp hooks
vfio/mdev: Synchronize device create/remove with parent removal
vfio/mdev: Avoid creating sysfs remove file on stale device removal
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
soundwire: intel: set dai min and max channels correctly
soundwire: stream: fix bad unlock balance
x86/fpu: Use fault_in_pages_writeable() for pre-faulting
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
vfio/mdev: Improve the create/remove sequence
SoC: rt274: Fix internal jack assignment in set_jack callback
ALSA: hdac: fix memory release for SST and SOF drivers
ASoC: SOF: Intel: hda: use the defined ppcap functions
ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card
ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override
ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override
Revert "gfs2: Replace gl_revokes with a GLF flag"
arm64: Silence gcc warnings about arch ABI drift
parisc: Fix crash due alternative coding for NP iopdir_fdc bit
parisc: Use lpa instruction to load physical addresses in driver code
parisc: configs: Remove useless UEVENT_HELPER_PATH
parisc: Use implicit space register selection for loading the coherence index of I/O pdirs
usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
usb: gadget: dwc2: fix zlp handling
usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
usb: dwc2: Fix DMA cache alignment issues
usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix
drm/komeda: Potential error pointer dereference
drm/komeda: remove set but not used variable 'kcrtc'
x86/CPU: Add more Icelake model numbers
hwmon: (pmbus/core) Treat parameters as paged if on multiple pages
hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples
hwmon: (core) add thermal sensors only if dev->of_node is present
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
selftests: vm: Fix test build failure when built by itself
tools: bpftool: Fix JSON output when lookup fails
mmc: also set max_segment_size in the device
mtip32xx: also set max_segment_size in the device
rsxx: don't call dma_set_max_seg_size
nvme-pci: don't limit DMA segement size
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
ceph: fix error handling in ceph_get_caps()
ceph: avoid iput_final() while holding mutex or in dispatch thread
ceph: single workqueue for inode related works
cgroup: css_task_iter_skip()'d iterators must be advanced before accessed
drm/amd/amdgpu: add RLC firmware to support raven1 refresh
drm/amd/powerplay: add set_power_profile_mode for raven1_refresh
drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 426
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 424
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 423
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 421
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 420
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 419
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 418
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 417
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 416
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 414
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 412
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 411
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 410
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 409
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 408
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 407
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 406
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 405
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 404
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 403
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 402
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 401
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 400
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 399
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 397
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 396
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 395
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 394
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 393
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 392
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 391
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 390
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 389
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 388
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 387
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 380
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 378
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 377
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 376
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 375
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 373
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 371
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 370
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 367
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 365
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 364
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 363
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 362
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 354
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 353
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 352
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 351
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 350
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 349
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 348
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 347
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 346
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 344
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 343
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 342
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 341
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 340
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 339
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 338
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 334
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 332
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 328
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 326
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 325
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 324
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 323
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 322
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 321
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 320
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 316
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 315
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 314
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 313
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 312
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 311
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 310
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 308
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 307
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 305
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 301
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 300
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 299
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 297
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 296
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 294
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 292
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 291
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 290
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 289
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 287
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 283
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 281
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 280
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 278
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 277
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 276
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 275
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 274
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 273
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 272
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 271
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 270
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 269
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 268
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 267
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 266
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 265
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 264
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 263
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 262
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 260
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 258
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 257
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 256
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 254
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 253
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 252
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 251
lib/test_stackinit: Handle Clang auto-initialization pattern
block: Drop unlikely before IS_ERR(_OR_NULL)
xen/swiotlb: don't initialize swiotlb twice on arm64
s390/mm: fix address space detection in exception handling
HID: logitech-dj: Fix 064d:c52f receiver support
Revert "HID: core: Call request_module before doing device_add"
Revert "HID: core: Do not call request_module() in async context"
Revert "HID: Increase maximum report size allowed by hid_field_extract()"
tests: fix pidfd-test compilation
signal: improve comments
samples: fix pidfd-metadata compilation
arm64: arch_timer: mark functions as __always_inline
arm64: smp: Moved cpu_logical_map[] to smp.h
arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding()
selftests/bpf: move test_lirc_mode2_user to TEST_GEN_PROGS_EXTENDED
USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
USB: usb-storage: Add new ID to ums-realtek
udmabuf: actually unmap the scatterlist
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous()
scsi: ufs: Check that space was properly alloced in copy_query_response
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
Revert "net/tls: avoid NULL-deref on resync during device removal"
block: aoe: no need to check return value of debugfs_create functions
net: dsa: sja1105: Fix link speed not working at 100 Mbps and below
net: phylink: avoid reducing support mask
scripts/checkstack.pl: Fix arm64 wrong or unknown architecture
kbuild: tar-pkg: enable communication with jobserver
kconfig: tests: fix recursive inclusion unit test
kbuild: teach kselftest-merge to find nested config files
nvmet: fix data_len to 0 for bdev-backed write_zeroes
MAINTAINERS: Hand over skd maintainership
ASoC: sun4i-i2s: Add offset to RX channel select
ASoC: sun4i-i2s: Fix sun8i tx channel offset mask
ASoC: max98090: remove 24-bit format support if RJ is 0
ASoC: da7219: Fix build error without CONFIG_I2C
ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error
drm/arm/hdlcd: Allow a bit of clock tolerance
drm/arm/hdlcd: Actually validate CRTC modes
drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times
drm/komeda: fixing of DMA mapping sg segment warning
netfilter: ipv6: nf_defrag: fix leakage of unqueued fragments
habanalabs: Read upper bits of trace buffer from RWPHI
arm64: arch_k3: Fix kconfig dependency warning
drm: don't block fb changes for async plane updates
drm/vc4: fix fb references in async update
drm/msm: fix fb references in async update
drm/amd: fix fb references in async update
drm/rockchip: fix fb references in async update
xen-blkfront: switch kcalloc to kvcalloc for large array allocation
drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable()
drm/mediatek: clear num_pipes when unbind driver
drm/mediatek: call drm_atomic_helper_shutdown() when unbinding driver
drm/mediatek: unbind components in mtk_drm_unbind()
drm/mediatek: fix unbind functions
net: sfp: read eeprom in maximum 16 byte increments
selftests: set sysctl bc_forwarding properly in router_broadcast.sh
ANDROID: update gki aarch64 ABI representation
net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled
net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported
net: ethernet: ti: cpsw_ethtool: fix ethtool ring param set
ANDROID: gki_defconfig: Enable CMA, SLAB_FREELIST (RANDOM and HARDENED) on x86
bpf: udp: Avoid calling reuseport's bpf_prog from udp_gro
bpf: udp: ipv6: Avoid running reuseport's bpf_prog from __udp6_lib_err
rcu: locking and unlocking need to always be at least barriers
ANDROID: gki_defconfig: enable SLAB_FREELIST_RANDOM, SLAB_FREELIST_HARDENED
ANDROID: gki_defconfig: enable CMA and increase CMA_AREAS
ASoC: SOF: fix DSP oops definitions in FW ABI
ASoC: hda: fix unbalanced codec dev refcount for HDA_DEV_ASOC
ASoC: SOF: ipc: replace fw ready bitfield with explicit bit ordering
ASoC: SOF: bump to ABI 3.6
ASoC: SOF: soundwire: add initial soundwire support
ASoC: SOF: uapi: mirror firmware changes
ASoC: Intel: Baytrail: add quirk for Aegex 10 (RU2) tablet
xfs: inode btree scrubber should calculate im_boffset correctly
mmc: sdhci_am654: Fix SLOTTYPE write
usb: typec: ucsi: ccg: fix memory leak in do_flash
ANDROID: update gki aarch64 ABI representation
habanalabs: Fix virtual address access via debugfs for 2MB pages
drm/komeda: Constify the usage of komeda_component/pipeline/dev_funcs
x86/power: Fix 'nosmt' vs hibernation triple fault during resume
mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
mm/vmalloc: Fix calculation of direct map addr range
PM: sleep: Add kerneldoc comments to some functions
drm/i915/gvt: save RING_HEAD into vreg when vgpu switched out
sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD
mdesc: fix a missing-check bug in get_vdev_port_node_info()
drm/i915/gvt: add F_CMD_ACCESS flag for wa regs
sparc64: Fix regression in non-hypervisor TLB flush xcall
packet: unconditionally free po->rollover
Update my email address
net: hns: Fix loopback test failed at copper ports
Linux 5.2-rc3
net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0
mm, compaction: make sure we isolate a valid PFN
include/linux/generic-radix-tree.h: fix kerneldoc comment
kernel/signal.c: trace_signal_deliver when signal_group_exit
drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not used
spdxcheck.py: fix directory structures
kasan: initialize tag to 0xff in __kasan_kmalloc
z3fold: fix sheduling while atomic
scripts/gdb: fix invocation when CONFIG_COMMON_CLK is not set
mm/gup: continue VM_FAULT_RETRY processing even for pre-faults
ocfs2: fix error path kobject memory leak
memcg: make it work on sparse non-0-node systems
mm, memcg: consider subtrees in memory.events
prctl_set_mm: downgrade mmap_sem to read lock
prctl_set_mm: refactor checks from validate_prctl_map
kernel/fork.c: make max_threads symbol static
arch/arm/boot/compressed/decompress.c: fix build error due to lz4 changes
arch/parisc/configs/c8000_defconfig: remove obsoleted CONFIG_DEBUG_SLAB_LEAK
mm/vmalloc.c: fix typo in comment
lib/sort.c: fix kernel-doc notation warnings
mm: fix Documentation/vm/hmm.rst Sphinx warnings
treewide: fix typos of SPDX-License-Identifier
crypto: ux500 - fix license comment syntax error
MAINTAINERS: add I2C DT bindings to ARM platforms
MAINTAINERS: add DT bindings to i2c drivers
mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()
iwlwifi: mvm: change TLC config cmd sent by rs to be async
iwlwifi: Fix double-free problems in iwl_req_fw_callback()
iwlwifi: fix AX201 killer sku loading firmware issue
iwlwifi: print fseq info upon fw assert
iwlwifi: clear persistence bit according to device family
iwlwifi: fix load in rfkill flow for unified firmware
iwlwifi: mvm: remove d3_sram debugfs file
bpf, riscv: clear high 32 bits for ALU32 add/sub/neg/lsh/rsh/arsh
libbpf: Return btf_fd for load_sk_storage_btf
HID: a4tech: fix horizontal scrolling
HID: hyperv: Add a module description line
net: dsa: sja1105: Don't store frame type in skb->cb
block: print offending values when cloned rq limits are exceeded
blk-mq: Document the blk_mq_hw_queue_to_node() arguments
blk-mq: Fix spelling in a source code comment
block: Fix bsg_setup_queue() kernel-doc header
block: Fix rq_qos_wait() kernel-doc header
block: Fix blk_mq_*_map_queues() kernel-doc headers
block: Fix throtl_pending_timer_fn() kernel-doc header
block: Convert blk_invalidate_devt() header into a non-kernel-doc header
block/partitions/ldm: Convert a kernel-doc header into a non-kernel-doc header
leds: avoid flush_work in atomic context
cgroup: Include dying leaders with live threads in PROCS iterations
cgroup: Implement css_task_iter_skip()
cgroup: Call cgroup_release() before __exit_signal()
netfilter: nf_tables: fix module autoload with inet family
Revert "lockd: Show pid of lockd for remote locks"
ALSA: hda/realtek - Update headset mode for ALC256
fs/adfs: fix filename fixup handling for "/" and "//" names
fs/adfs: move append_filetype_suffix() into adfs_object_fixup()
fs/adfs: remove truncated filename hashing
fs/adfs: factor out filename fixup
fs/adfs: factor out object fixups
fs/adfs: factor out filename case lowering
fs/adfs: factor out filename comparison
ovl: doc: add non-standard corner cases
pstore/ram: Run without kernel crash dump region
MAINTAINERS: add Vasily Gorbik and Christian Borntraeger for s390
MAINTAINERS: Farewell Martin Schwidefsky
pstore: Set tfm to NULL on free_buf_for_compression
nds32: add new emulations for floating point instruction
nds32: Avoid IEX status being incorrectly modified
math-emu: Use statement expressions to fix Wshift-count-overflow warning
net: correct zerocopy refcnt with udp MSG_MORE
ethtool: Check for vlan etype or vlan tci when parsing flow_rule
net: don't clear sock->sk early to avoid trouble in strparser
net-gro: fix use-after-free read in napi_gro_frags()
net: dsa: tag_8021q: Create a stable binary format
net: dsa: tag_8021q: Change order of rx_vid setup
net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value
docs cgroups: add another example size for hugetlb
NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled
NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter
ipv4: tcp_input: fix stack out of bounds when parsing TCP options.
mlxsw: spectrum: Prevent force of 56G
mlxsw: spectrum_acl: Avoid warning after identical rules insertion
SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential
net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT
SUNRPC fix regression in umount of a secure mount
r8169: fix MAC address being lost in PCI D3
treewide: Add SPDX license identifier - Kbuild
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 200
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 199
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 198
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 197
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 195
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 193
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 191
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 190
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 188
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 185
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 183
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 182
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 180
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 179
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 176
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 175
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 173
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 172
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 171
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 170
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 165
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 164
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 162
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 161
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 160
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 158
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 155
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 154
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 153
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 151
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 150
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 148
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 147
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 145
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 144
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 143
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 142
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 140
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 139
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 138
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 137
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 136
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 135
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 133
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 132
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 131
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 130
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 129
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 128
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 127
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 126
net: core: support XDP generic on stacked devices.
netvsc: unshare skb in VF rx handler
udp: Avoid post-GRO UDP checksum recalculation
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
fpga: zynqmp-fpga: Correctly handle error pointer
selftests: vm: install test_vmalloc.sh for run_vmtests
userfaultfd: selftest: fix compiler warning
kselftest/cgroup: fix incorrect test_core skip
kselftest/cgroup: fix unexpected testing failure on test_core
kselftest/cgroup: fix unexpected testing failure on test_memcontrol
xtensa: Fix section mismatch between memblock_reserve and mem_reserve
signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
mwifiex: Abort at too short BSS descriptor element
mwifiex: Fix possible buffer overflows at parsing bss descriptor
drm/i915/gvt: Assign NULL to the pointer after memory free.
drm/i915/gvt: Check if cur_pt_type is valid
x86: intel_epb: Do not build when CONFIG_PM is unset
crypto: hmac - fix memory leak in hmac_init_tfm()
crypto: jitterentropy - change back to module_init()
ARM: dts: Drop bogus CLKSEL for timer12 on dra7
KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry()
KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9
KVM: PPC: Book3S HV: XIVE: Fix page offset when clearing ESB pages
KVM: PPC: Book3S HV: XIVE: Take the srcu read lock when accessing memslots
KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts
KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device
drm/i915/gvt: Fix cmd length of VEB_DI_IECP
drm/i915/gvt: refine ggtt range validation
drm/i915/gvt: Fix vGPU CSFE_CHICKEN1_REG mmio handler
drm/i915/gvt: Fix GFX_MODE handling
drm/i915/gvt: Update force-to-nonpriv register whitelist
drm/i915/gvt: Initialize intel_gvt_gtt_entry in stack
ima: show rules with IMA_INMASK correctly
evm: check hash algorithm passed to init_desc()
scsi: libsas: delete sas port if expander discover failed
scsi: libsas: only clear phy->in_shutdown after shutdown event done
scsi: scsi_dh_alua: Fix possible null-ptr-deref
scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask
scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs)
scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove
scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()
net: phy: dp83867: Set up RGMII TX delay
net: phy: dp83867: do not call config_init twice
net: phy: dp83867: increase SGMII autoneg timer duration
net: phy: dp83867: fix speed 10 in sgmii mode
net: phy: marvell10g: report if the PHY fails to boot firmware
net: phylink: ensure consistent phy interface mode
cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()
blk-mq: Fix memory leak in error handling
usbip: usbip_host: fix stub_dev lock context imbalance regression
net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs
MIPS: uprobes: remove set but not used variable 'epc'
s390/crypto: fix possible sleep during spinlock aquired
MIPS: pistachio: Build uImage.gz by default
MIPS: Make virt_addr_valid() return bool
MIPS: Bounds check virt_addr_valid
CIFS: cifs_read_allocate_pages: don't iterate through whole page array on ENOMEM
RDMA/efa: Remove MAYEXEC flag check from mmap flow
mlx5: avoid 64-bit division
IB/hfi1: Validate page aligned for a given virtual address
IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value
IB/hfi1: Insure freeze_work work_struct is canceled on shutdown
IB/rdmavt: Fix alloc_qpn() WARN_ON()
ASoC: sun4i-codec: fix first delay on Speaker
drm/amdgpu: reserve stollen vram for raven series
media: venus: hfi_parser: fix a regression in parser
selftests: bpf: fix compiler warning in flow_dissector test
arm64: use the correct function type for __arm64_sys_ni_syscall
arm64: use the correct function type in SYSCALL_DEFINE0
arm64: fix syscall_fn_t type
block: don't protect generic_make_request_checks with blk_queue_enter
block: move blk_exit_queue into __blk_release_queue
selftests: bpf: complete sub-register zero extension checks
selftests: bpf: move sub-register zero extension checks into subreg.c
ovl: detect overlapping layers
drm/i915/icl: Add WaDisableBankHangMode
ALSA: fireface: Use ULL suffixes for 64-bit constants
signal/arm64: Use force_sig not force_sig_fault for SIGKILL
nl80211: fill all policy .type entries
mac80211: free peer keys before vif down in mesh
ANDROID: ABI out: Use the extension .xml rather then .out
drm/mediatek: respect page offset for PRIME mmap calls
drm/mediatek: adjust ddp clock control flow
ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops
KVM: PPC: Book3S HV: XIVE: Fix the enforced limit on the vCPU identifier
KVM: PPC: Book3S HV: XIVE: Do not test the EQ flag validity when resetting
KVM: PPC: Book3S HV: XIVE: Clear file mapping when device is released
KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu
KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list
KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup
KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions
Revert "drivers: thermal: tsens: Add new operation to check if a sensor is enabled"
net/mlx5e: Disable rxhash when CQE compress is enabled
net/mlx5e: restrict the real_dev of vlan device is the same as uplink device
net/mlx5: Allocate root ns memory using kzalloc to match kfree
net/mlx5: Avoid double free in fs init error unwinding path
net/mlx5: Avoid double free of root ns in the error flow path
net/mlx5: Fix error handling in mlx5_load()
Documentation: net-sysfs: Remove duplicate PHY device documentation
llc: fix skb leak in llc_build_and_send_ui_pkt()
selftests: pmtu: Fix encapsulating device in pmtu_vti6_link_change_mtu
dfs_cache: fix a wrong use of kfree in flush_cache_ent()
fs/cifs/smb2pdu.c: fix buffer free in SMB2_ioctl_free
cifs: fix memory leak of pneg_inbuf on -EOPNOTSUPP ioctl case
xenbus: Avoid deadlock during suspend due to open transactions
xen/pvcalls: Remove set but not used variable
tracing: Avoid memory leak in predicate_parse()
habanalabs: fix bug in checking huge page optimization
mmc: sdhci: Fix SDIO IRQ thread deadlock
dpaa_eth: use only online CPU portals
net: mvneta: Fix err code path of probe
net: stmmac: Do not output error on deferred probe
Btrfs: fix race updating log root item during fsync
Btrfs: fix wrong ctime and mtime of a directory after log replay
ARC: [plat-hsdk] Get rid of inappropriate PHY settings
ARC: [plat-hsdk]: Add support of Vivante GPU
ARC: [plat-hsdk]: enable creg-gpio controller
Btrfs: fix fsync not persisting changed attributes of a directory
btrfs: qgroup: Check bg while resuming relocation to avoid NULL pointer dereference
btrfs: reloc: Also queue orphan reloc tree for cleanup to avoid BUG_ON()
Btrfs: incremental send, fix emission of invalid clone operations
Btrfs: incremental send, fix file corruption when no-holes feature is enabled
btrfs: correct zstd workspace manager lock to use spin_lock_bh()
btrfs: Ensure replaced device doesn't have pending chunk allocation
ia64: fix build errors by exporting paddr_to_nid()
ASoC: SOF: Intel: hda: fix the hda init chip
ASoC: SOF: ipc: fix a race, leading to IPC timeouts
ASoC: SOF: control: correct the copy size for bytes kcontrol put
ASoC: SOF: pcm: remove warning - initialize workqueue on open
ASoC: SOF: pcm: clear hw_params_upon_resume flag correctly
ASoC: SOF: core: fix error handling with the probe workqueue
ASoC: SOF: core: remove snd_soc_unregister_component in case of error
ASoC: SOF: core: remove DSP after unregistering machine driver
ASoC: soc-core: fixup references at soc_cleanup_card_resources()
arm64/module: revert to unsigned interpretation of ABS16/32 relocations
KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID
kvm: fix compile on s390 part 2
xprtrdma: Use struct_size() in kzalloc()
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Fix s390 missing module symbol and warning for non-root users
perf machine: Read also the end of the kernel
perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms
perf session: Add missing swap ops for namespace events
perf namespace: Protect reading thread's namespace
tools headers UAPI: Sync drm/drm.h with the kernel
s390/crypto: fix gcm-aes-s390 selftest failures
s390/zcrypt: Fix wrong dispatching for control domain CPRBs
s390/pci: fix assignment of bus resources
s390/pci: fix struct definition for set PCI function
s390: mark __cpacf_check_opcode() and cpacf_query_func() as __always_inline
s390: add unreachable() to dump_fault_info() to fix -Wmaybe-uninitialized
tools headers UAPI: Sync drm/i915_drm.h with the kernel
tools headers UAPI: Sync linux/fs.h with the kernel
tools headers UAPI: Sync linux/sched.h with the kernel
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls
perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel
perf data: Fix 'strncat may truncate' build failure with recent gcc
arm64: Fix the arm64_personality() syscall wrapper redirection
rtw88: Make some symbols static
rtw88: avoid circular locking between local->iflist_mtx and rtwdev->mutex
rsi: Properly initialize data in rsi_sdio_ta_reset
rtw88: fix unassigned rssi_level in rtw_sta_info
rtw88: fix subscript above array bounds compiler warning
fuse: extract helper for range writeback
fuse: fix copy_file_range() in the writeback case
mmc: meson-gx: fix irq ack
mmc: tmio: fix SCC error handling to avoid false positive CRC error
mmc: tegra: Fix a warning message
memstick: mspro_block: Fix an error code in mspro_block_issue_req()
mac80211: mesh: fix RCU warning
nl80211: fix station_info pertid memory leak
mac80211: Do not use stack memory with scatterlist for GMAC
ALSA: line6: Assure canceling delayed work at disconnection
configfs: Fix use-after-free when accessing sd->s_dentry
ALSA: hda - Force polling mode on CNL for fixing codec communication
i2c: synquacer: fix synquacer_i2c_doxfer() return value
i2c: mlxcpld: Fix wrong initialization order in probe
i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr
RDMA/core: Fix panic when port_data isn't initialized
RDMA/uverbs: Pass udata on uverbs error unwind
RDMA/core: Clear out the udata before error unwind
net: aquantia: tcp checksum 0xffff being handled incorrectly
net: aquantia: fix LRO with FCS error
net: aquantia: check rx csum for all packets in LRO session
net: aquantia: tx clean budget logic error
vhost: scsi: add weight support
vhost: vsock: add weight support
vhost_net: fix possible infinite loop
vhost: introduce vhost_exceeds_weight()
virtio: Fix indentation of VIRTIO_MMIO
virtio: add unlikely() to WARN_ON_ONCE()
iommu/vt-d: Set the right field for Page Walk Snoop
iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock
iommu: Add missing new line for dma type
drm/etnaviv: lock MMU while dumping core
block: Don't revalidate bdev of hidden gendisk
loop: Don't change loop device under exclusive opener
drm/imx: ipuv3-plane: fix atomic update status query for non-plus i.MX6Q
drm/qxl: drop WARN_ONCE()
iio: temperature: mlx90632 Relax the compatibility check
iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
staging:iio:ad7150: fix threshold mode config bit
fuse: add FUSE_WRITE_KILL_PRIV
fuse: fallocate: fix return with locked inode
PCI: PM: Avoid possible suspend-to-idle issue
ACPI: PM: Call pm_set_suspend_via_firmware() during hibernation
ACPI/PCI: PM: Add missing wakeup.flags.valid checks
ovl: support the FS_IOC_FS[SG]ETXATTR ioctls
soundwire: stream: fix out of boundary access on port properties
net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()
selftests/tls: add test for sleeping even though there is data
net/tls: fix no wakeup on partial reads
selftests/tls: test for lowat overshoot with multiple records
net/tls: fix lowat calculation if some data came from previous record
dpaa2-eth: Make constant 64-bit long
dpaa2-eth: Use PTR_ERR_OR_ZERO where appropriate
dpaa2-eth: Fix potential spectre issue
bonding/802.3ad: fix slave link initialization transition states
io_uring: Fix __io_uring_register() false success
net: ethtool: Document get_rxfh_context and set_rxfh_context ethtool ops
net: stmmac: dwmac-mediatek: modify csr_clk value to fix mdio read/write fail
net: stmmac: fix csr_clk can't be zero issue
net: stmmac: update rx tail pointer register to fix rx dma hang issue.
ip_sockglue: Fix missing-check bug in ip_ra_control()
ipv6_sockglue: Fix a missing-check bug in ip6_ra_control()
efi: Allow the number of EFI configuration tables entries to be zero
efi/x86/Add missing error handling to old_memmap 1:1 mapping code
parisc: Fix compiler warnings in float emulation code
parisc/slab: cleanup after /proc/slab_allocators removal
bpf: sockmap, fix use after free from sleep in psock backlog workqueue
net: sched: don't use tc_action->order during action dump
cxgb4: Revert "cxgb4: Remove SGE_HOST_PAGE_SIZE dependency on page size"
net: fec: fix the clk mismatch in failed_reset path
habanalabs: Avoid using a non-initialized MMU cache mutex
habanalabs: fix debugfs code
uapi/habanalabs: add opcode for enable/disable device debug mode
habanalabs: halt debug engines on user process close
selftests: rtc: rtctest: specify timeouts
selftests/harness: Allow test to configure timeout
selftests/ftrace: Add checkbashisms meta-testcase
selftests/ftrace: Make a script checkbashisms clean
media: smsusb: better handle optional alignment
test_firmware: Use correct snprintf() limit
genwqe: Prevent an integer overflow in the ioctl
parport: Fix mem leak in parport_register_dev_model
fpga: dfl: expand minor range when registering chrdev region
fpga: dfl: Add lockdep classes for pdata->lock
fpga: dfl: afu: Pass the correct device to dma_mapping_error()
fpga: stratix10-soc: fix use-after-free on s10_init()
w1: ds2408: Fix typo after 49695ac468
(reset on output_write retry with readback)
kheaders: Do not regenerate archive if config is not changed
kheaders: Move from proc to sysfs
drm/amd/display: Don't load DMCU for Raven 1 (v2)
drm/i915: Maintain consistent documentation subsection ordering
scripts/sphinx-pre-install: make it handle Sphinx versions
docs: Fix conf.py for Sphinx 2.0
vt/fbcon: deinitialize resources in visual_init() after failed memory allocation
xfs: fix broken log reservation debugging
clocksource/drivers/timer-ti-dm: Change to new style declaration
ASoC: core: lock client_mutex while removing link components
ASoC: simple-card: Restore original configuration of DAI format
{nl,mac}80211: allow 4addr AP operation on crypto controlled devices
mac80211_hwsim: mark expected switch fall-through
mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()
mac80211: remove set but not used variable 'old'
mac80211: handle deauthentication/disassociation from TDLS peer
gpio: fix gpio-adp5588 build errors
pinctrl: stmfx: Fix compile issue when CONFIG_OF_GPIO is not defined
staging: kpc2000: Add dependency on MFD_CORE to kconfig symbol 'KPC2000'
perf/ring-buffer: Use regular variables for nesting
perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
perf/ring_buffer: Add ordering to rb->nest increment
perf/ring_buffer: Fix exposing a temporarily decreased data_head
x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor
x86/boot: Provide KASAN compatible aliases for string routines
ALSA: hda/realtek - Enable micmute LED for Huawei laptops
Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD
Input: silead - add MSSL0017 to acpi_device_id
cxgb4: offload VLAN flows regardless of VLAN ethtype
hsr: fix don't prune the master node from the node_db
net: mvpp2: cls: Fix leaked ethtool_rx_flow_rule
docs: fix multiple doc build warnings in enumeration.rst
lib/list_sort: fix kerneldoc build error
docs: fix numaperf.rst and add it to the doc tree
doc: Cope with the deprecation of AutoReporter
doc: Cope with Sphinx logging deprecations
bpf: sockmap, restore sk_write_space when psock gets dropped
selftests: bpf: add zero extend checks for ALU32 and/or/xor
bpf, riscv: clear target register high 32-bits for and/or/xor on ALU32
spi: abort spi_sync if failed to prepare_transfer_hardware
ALSA: hda/realtek - Set default power save node to 0
ipv4/igmp: fix build error if !CONFIG_IP_MULTICAST
powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load()
MIPS: TXx9: Fix boot crash in free_initmem()
MIPS: remove a space after -I to cope with header search paths for VDSO
MIPS: mark ginvt() as __always_inline
ipv4/igmp: fix another memory leak in igmpv3_del_delrec()
bnxt_en: Device serial number is supported only for PFs.
bnxt_en: Reduce memory usage when running in kdump kernel.
bnxt_en: Fix possible BUG() condition when calling pci_disable_msix().
bnxt_en: Fix aggregation buffer leak under OOM condition.
ipv6: Fix redirect with VRF
net: stmmac: fix reset gpio free missing
mISDN: make sure device name is NUL terminated
net: macb: save/restore the remaining registers and features
media: dvb: warning about dvb frequency limits produces too much noise
net/tls: don't ignore netdev notifications if no TLS features
net/tls: fix state removal with feature flags off
net/tls: avoid NULL-deref on resync during device removal
Documentation: add TLS offload documentation
Documentation: tls: RSTify the ktls documentation
Documentation: net: move device drivers docs to a submenu
mISDN: Fix indenting in dsp_cmx.c
ocelot: Dont allocate another multicast list, use __dev_mc_sync
Validate required parameters in inet6_validate_link_af
xhci: Use %zu for printing size_t type
xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()
xhci: Fix immediate data transfer if buffer is already DMA mapped
usb: xhci: avoid null pointer deref when bos field is NULL
usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint()
xhci: update bounce buffer with correct sg num
media: usb: siano: Fix false-positive "uninitialized variable" warning
spi: spi-fsl-spi: call spi_finalize_current_message() at the end
ALSA: hda/realtek - Check headset type by unplug and resume
powerpc/perf: Fix MMCRA corruption by bhrb_filter
powerpc/powernv: Return for invalid IMC domain
HID: logitech-hidpp: Add support for the S510 remote control
HID: multitouch: handle faulty Elo touch device
selftests: netfilter: add flowtable test script
netfilter: nft_flow_offload: IPCB is only valid for ipv4 family
netfilter: nft_flow_offload: don't offload when sequence numbers need adjustment
netfilter: nft_flow_offload: set liberal tracking mode for tcp
netfilter: nf_flow_table: ignore DF bit setting
ASoC: Intel: sof-rt5682: fix AMP quirk support
ASoC: Intel: sof-rt5682: fix for codec button mapping
clk: ti: clkctrl: Fix clkdm_clk handling
clk: imx: imx8mm: fix int pll clk gate
clk: sifive: restrict Kconfig scope for the FU540 PRCI driver
RDMA/hns: Fix PD memory leak for internal allocation
netfilter: nat: fix udp checksum corruption
selftests: netfilter: missing error check when setting up veth interface
RDMA/srp: Rename SRP sysfs name after IB device rename trigger
ipvs: Fix use-after-free in ip_vs_in
ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node
ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node
samples, bpf: suppress compiler warning
samples, bpf: fix to change the buffer size for read()
bpf: Check sk_fullsock() before returning from bpf_sk_lookup()
bpf: fix out-of-bounds read in __bpf_skc_lookup
Documentation/networking: fix af_xdp.rst Sphinx warnings
netfilter: nft_fib: Fix existence check support
netfilter: nf_queue: fix reinject verdict handling
dmaengine: sprd: Add interrupt support for 2-stage transfer
dmaengine: sprd: Fix the right place to configure 2-stage transfer
dmaengine: sprd: Fix block length overflow
dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
dmaengine: sprd: Add validation of current descriptor in irq handler
dmaengine: sprd: Fix the possible crash when getting descriptor status
tty: max310x: Fix external crystal register setup
serial: sh-sci: disable DMA for uart_console
serial: imx: remove log spamming error message
tty: serial: msm_serial: Fix XON/XOFF
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
USB: serial: pl2303: add Allied Telesis VT-Kit3
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
dmaengine: tegra210-adma: Fix spelling
dmaengine: tegra210-adma: Fix channel FIFO configuration
dmaengine: tegra210-adma: Fix crash during probe
dmaengine: mediatek-cqdma: sleeping in atomic context
dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
USB: rio500: update Documentation
USB: rio500: simplify locking
USB: rio500: fix memory leak in close after disconnect
USB: rio500: refuse more than one device at a time
usbip: usbip_host: fix BUG: sleeping function called from invalid context
USB: sisusbvga: fix oops in error path of sisusb_probe
USB: Add LPM quirk for Surface Dock GigE adapter
media: usb: siano: Fix general protection fault in smsusb
usb: mtu3: fix up undefined reference to usb_debug_root
USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor
Input: elantech - enable middle button support on 2 ThinkPads
dmaengine: fsl-qdma: Add improvement
dmaengine: jz4780: Fix transfers being ACKed too soon
gcc-plugins: Fix build failures under Darwin host
MAINTAINERS: Update Stefan Wahren email address
netfilter: nf_tables: fix oops during rule dump
ARC: mm: SIGSEGV userspace trying to access kernel virtual memory
ARC: fix build warnings
ARM: dts: bcm: Add missing device_type = "memory" property
soc: bcm: brcmstb: biuctrl: Register writes require a barrier
soc: brcmstb: Fix error path for unsupported CPUs
ARM: dts: dra71x: Disable usb4_tm target module
ARM: dts: dra71x: Disable rtc target module
ARM: dts: dra76x: Disable usb4_tm target module
ARM: dts: dra76x: Disable rtc target module
ASoC: simple-card: Fix configuration of DAI format
ASoC: Intel: soc-acpi: Fix machine selection order
ASoC: rt5677-spi: Handle over reading when flipping bytes
ASoC: soc-dpm: fixup DAI active unbalance
pinctrl: intel: Clear interrupt status in mask/unmask callback
pinctrl: intel: Use GENMASK() consistently
parisc: Allow building 64-bit kernel without -mlong-calls compiler option
parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK
staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup()
staging: vc04_services: prevent integer overflow in create_pagelist()
Staging: vc04_services: Fix a couple error codes
staging: wlan-ng: fix adapter initialization failure
staging: kpc2000: double unlock in error handling in kpc_dma_transfer()
staging: kpc2000: Fix build error without CONFIG_UIO
staging: kpc2000: fix build error on xtensa
staging: erofs: set sb->s_root to NULL when failing from __getname()
ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX
firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready
arm64: imx: Fix build error without CONFIG_SOC_BUS
ima: fix wrong signed policy requirement when not appraising
x86/ima: Check EFI_RUNTIME_SERVICES before using
stacktrace: Unbreak stack_trace_save_tsk_reliable()
HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary
HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth
HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact
HID: wacom: Don't report anything prior to the tool entering range
HID: wacom: Don't set tool type until we're in range
ASoC: cs42xx8: Add regcache mask dirty
regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer
ASoC: fsl_asrc: Fix the issue about unsupported rate
spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
Input: elan_i2c - increment wakeup count if wake source
wireless: Skip directory when generating certificates
ASoC: ak4458: rstn_control - return a non-zero on error only
ASoC: soc-pcm: BE dai needs prepare when pause release after resume
ASoC: ak4458: add return value for ak4458_probe
ASoC : cs4265 : readable register too low
ASoC: SOF: fix error in verbose ipc command parsing
ASoC: SOF: fix race in FW boot timeout handling
ASoC: SOF: nocodec: fix undefined reference
iio: adc: ti-ads8688: fix timestamp is not updated in buffer
iio: dac: ds4422/ds4424 fix chip verification
HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5
HID: logitech-hidpp: add support for the MX5500 keyboard
HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver
HID: i2c-hid: add iBall Aer3 to descriptor override
spi: Fix Raspberry Pi breakage
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
bus: ti-sysc: Handle devices with no control registers
ARM: dts: Configure osc clock for d_can on am335x
iio: imu: mpu6050: Fix FIFO layout for ICM20602
lkdtm/bugs: Adjust recursion test to avoid elision
lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
iio: adc: ads124: avoid buffer overflow
iio: adc: modify NPCM ADC read reference voltage
Change-Id: I98c823993370027391cc21dfb239c3049f025136
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
3003 lines
81 KiB
C
3003 lines
81 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
|
|
*
|
|
* Copyright 2011 Integrated Device Technology, Inc.
|
|
* Alexandre Bounine <alexandre.bounine@idt.com>
|
|
* Chul Kim <chul.kim@idt.com>
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/rio.h>
|
|
#include <linux/rio_drv.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "tsi721.h"
|
|
|
|
#ifdef DEBUG
|
|
u32 tsi_dbg_level;
|
|
module_param_named(dbg_level, tsi_dbg_level, uint, S_IWUSR | S_IRUGO);
|
|
MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)");
|
|
#endif
|
|
|
|
static int pcie_mrrs = -1;
|
|
module_param(pcie_mrrs, int, S_IRUGO);
|
|
MODULE_PARM_DESC(pcie_mrrs, "PCIe MRRS override value (0...5)");
|
|
|
|
static u8 mbox_sel = 0x0f;
|
|
module_param(mbox_sel, byte, S_IRUGO);
|
|
MODULE_PARM_DESC(mbox_sel,
|
|
"RIO Messaging MBOX Selection Mask (default: 0x0f = all)");
|
|
|
|
static DEFINE_SPINLOCK(tsi721_maint_lock);
|
|
|
|
static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
|
|
static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
|
|
|
|
/**
|
|
* tsi721_lcread - read from local SREP config space
|
|
* @mport: RapidIO master port info
|
|
* @index: ID of RapdiIO interface
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @data: Value to be read into
|
|
*
|
|
* Generates a local SREP space read. Returns %0 on
|
|
* success or %-EINVAL on failure.
|
|
*/
|
|
static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
|
|
int len, u32 *data)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
|
|
if (len != sizeof(u32))
|
|
return -EINVAL; /* only 32-bit access is supported */
|
|
|
|
*data = ioread32(priv->regs + offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tsi721_lcwrite - write into local SREP config space
|
|
* @mport: RapidIO master port info
|
|
* @index: ID of RapdiIO interface
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @data: Value to be written
|
|
*
|
|
* Generates a local write into SREP configuration space. Returns %0 on
|
|
* success or %-EINVAL on failure.
|
|
*/
|
|
static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
|
|
int len, u32 data)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
|
|
if (len != sizeof(u32))
|
|
return -EINVAL; /* only 32-bit access is supported */
|
|
|
|
iowrite32(data, priv->regs + offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tsi721_maint_dma - Helper function to generate RapidIO maintenance
|
|
* transactions using designated Tsi721 DMA channel.
|
|
* @priv: pointer to tsi721 private data
|
|
* @sys_size: RapdiIO transport system size
|
|
* @destid: Destination ID of transaction
|
|
* @hopcount: Number of hops to target device
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @data: Location to be read from or write into
|
|
* @do_wr: Operation flag (1 == MAINT_WR)
|
|
*
|
|
* Generates a RapidIO maintenance transaction (Read or Write).
|
|
* Returns %0 on success and %-EINVAL or %-EFAULT on failure.
|
|
*/
|
|
static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
|
|
u16 destid, u8 hopcount, u32 offset, int len,
|
|
u32 *data, int do_wr)
|
|
{
|
|
void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id);
|
|
struct tsi721_dma_desc *bd_ptr;
|
|
u32 rd_count, swr_ptr, ch_stat;
|
|
unsigned long flags;
|
|
int i, err = 0;
|
|
u32 op = do_wr ? MAINT_WR : MAINT_RD;
|
|
|
|
if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&tsi721_maint_lock, flags);
|
|
|
|
bd_ptr = priv->mdma.bd_base;
|
|
|
|
rd_count = ioread32(regs + TSI721_DMAC_DRDCNT);
|
|
|
|
/* Initialize DMA descriptor */
|
|
bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
|
|
bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
|
|
bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
|
|
bd_ptr[0].raddr_hi = 0;
|
|
if (do_wr)
|
|
bd_ptr[0].data[0] = cpu_to_be32p(data);
|
|
else
|
|
bd_ptr[0].data[0] = 0xffffffff;
|
|
|
|
mb();
|
|
|
|
/* Start DMA operation */
|
|
iowrite32(rd_count + 2, regs + TSI721_DMAC_DWRCNT);
|
|
ioread32(regs + TSI721_DMAC_DWRCNT);
|
|
i = 0;
|
|
|
|
/* Wait until DMA transfer is finished */
|
|
while ((ch_stat = ioread32(regs + TSI721_DMAC_STS))
|
|
& TSI721_DMAC_STS_RUN) {
|
|
udelay(1);
|
|
if (++i >= 5000000) {
|
|
tsi_debug(MAINT, &priv->pdev->dev,
|
|
"DMA[%d] read timeout ch_status=%x",
|
|
priv->mdma.ch_id, ch_stat);
|
|
if (!do_wr)
|
|
*data = 0xffffffff;
|
|
err = -EIO;
|
|
goto err_out;
|
|
}
|
|
}
|
|
|
|
if (ch_stat & TSI721_DMAC_STS_ABORT) {
|
|
/* If DMA operation aborted due to error,
|
|
* reinitialize DMA channel
|
|
*/
|
|
tsi_debug(MAINT, &priv->pdev->dev, "DMA ABORT ch_stat=%x",
|
|
ch_stat);
|
|
tsi_debug(MAINT, &priv->pdev->dev,
|
|
"OP=%d : destid=%x hc=%x off=%x",
|
|
do_wr ? MAINT_WR : MAINT_RD,
|
|
destid, hopcount, offset);
|
|
iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
|
|
iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
|
|
udelay(10);
|
|
iowrite32(0, regs + TSI721_DMAC_DWRCNT);
|
|
udelay(1);
|
|
if (!do_wr)
|
|
*data = 0xffffffff;
|
|
err = -EIO;
|
|
goto err_out;
|
|
}
|
|
|
|
if (!do_wr)
|
|
*data = be32_to_cpu(bd_ptr[0].data[0]);
|
|
|
|
/*
|
|
* Update descriptor status FIFO RD pointer.
|
|
* NOTE: Skipping check and clear FIFO entries because we are waiting
|
|
* for transfer to be completed.
|
|
*/
|
|
swr_ptr = ioread32(regs + TSI721_DMAC_DSWP);
|
|
iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP);
|
|
|
|
err_out:
|
|
spin_unlock_irqrestore(&tsi721_maint_lock, flags);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* tsi721_cread_dma - Generate a RapidIO maintenance read transaction
|
|
* using Tsi721 BDMA engine.
|
|
* @mport: RapidIO master port control structure
|
|
* @index: ID of RapdiIO interface
|
|
* @destid: Destination ID of transaction
|
|
* @hopcount: Number of hops to target device
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @val: Location to be read into
|
|
*
|
|
* Generates a RapidIO maintenance read transaction.
|
|
* Returns %0 on success and %-EINVAL or %-EFAULT on failure.
|
|
*/
|
|
static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
|
|
u8 hopcount, u32 offset, int len, u32 *data)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
|
|
return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
|
|
offset, len, data, 0);
|
|
}
|
|
|
|
/**
|
|
* tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
|
|
* using Tsi721 BDMA engine
|
|
* @mport: RapidIO master port control structure
|
|
* @index: ID of RapdiIO interface
|
|
* @destid: Destination ID of transaction
|
|
* @hopcount: Number of hops to target device
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @val: Value to be written
|
|
*
|
|
* Generates a RapidIO maintenance write transaction.
|
|
* Returns %0 on success and %-EINVAL or %-EFAULT on failure.
|
|
*/
|
|
static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
|
|
u8 hopcount, u32 offset, int len, u32 data)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
u32 temp = data;
|
|
|
|
return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
|
|
offset, len, &temp, 1);
|
|
}
|
|
|
|
/**
|
|
* tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
|
|
* @priv: tsi721 device private structure
|
|
*
|
|
* Handles inbound port-write interrupts. Copies PW message from an internal
|
|
* buffer into PW message FIFO and schedules deferred routine to process
|
|
* queued messages.
|
|
*/
|
|
static int
|
|
tsi721_pw_handler(struct tsi721_device *priv)
|
|
{
|
|
u32 pw_stat;
|
|
u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
|
|
|
|
|
|
pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
|
|
|
|
if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
|
|
pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
|
|
pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
|
|
pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
|
|
pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
|
|
|
|
/* Queue PW message (if there is room in FIFO),
|
|
* otherwise discard it.
|
|
*/
|
|
spin_lock(&priv->pw_fifo_lock);
|
|
if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
|
|
kfifo_in(&priv->pw_fifo, pw_buf,
|
|
TSI721_RIO_PW_MSG_SIZE);
|
|
else
|
|
priv->pw_discard_count++;
|
|
spin_unlock(&priv->pw_fifo_lock);
|
|
}
|
|
|
|
/* Clear pending PW interrupts */
|
|
iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
|
|
priv->regs + TSI721_RIO_PW_RX_STAT);
|
|
|
|
schedule_work(&priv->pw_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tsi721_pw_dpc(struct work_struct *work)
|
|
{
|
|
struct tsi721_device *priv = container_of(work, struct tsi721_device,
|
|
pw_work);
|
|
union rio_pw_msg pwmsg;
|
|
|
|
/*
|
|
* Process port-write messages
|
|
*/
|
|
while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)&pwmsg,
|
|
TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
|
|
/* Pass the port-write message to RIO core for processing */
|
|
rio_inb_pwrite_handler(&priv->mport, &pwmsg);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* tsi721_pw_enable - enable/disable port-write interface init
|
|
* @mport: Master port implementing the port write unit
|
|
* @enable: 1=enable; 0=disable port-write message handling
|
|
*/
|
|
static int tsi721_pw_enable(struct rio_mport *mport, int enable)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
u32 rval;
|
|
|
|
rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
|
|
|
|
if (enable)
|
|
rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
|
|
else
|
|
rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
|
|
|
|
/* Clear pending PW interrupts */
|
|
iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
|
|
priv->regs + TSI721_RIO_PW_RX_STAT);
|
|
/* Update enable bits */
|
|
iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tsi721_dsend - Send a RapidIO doorbell
|
|
* @mport: RapidIO master port info
|
|
* @index: ID of RapidIO interface
|
|
* @destid: Destination ID of target device
|
|
* @data: 16-bit info field of RapidIO doorbell
|
|
*
|
|
* Sends a RapidIO doorbell message. Always returns %0.
|
|
*/
|
|
static int tsi721_dsend(struct rio_mport *mport, int index,
|
|
u16 destid, u16 data)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
u32 offset;
|
|
|
|
offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
|
|
(destid << 2);
|
|
|
|
tsi_debug(DBELL, &priv->pdev->dev,
|
|
"Send Doorbell 0x%04x to destID 0x%x", data, destid);
|
|
iowrite16be(data, priv->odb_base + offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tsi721_dbell_handler - Tsi721 doorbell interrupt handler
|
|
* @priv: tsi721 device-specific data structure
|
|
*
|
|
* Handles inbound doorbell interrupts. Copies doorbell entry from an internal
|
|
* buffer into DB message FIFO and schedules deferred routine to process
|
|
* queued DBs.
|
|
*/
|
|
static int
|
|
tsi721_dbell_handler(struct tsi721_device *priv)
|
|
{
|
|
u32 regval;
|
|
|
|
/* Disable IDB interrupts */
|
|
regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
|
|
regval &= ~TSI721_SR_CHINT_IDBQRCV;
|
|
iowrite32(regval,
|
|
priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
|
|
|
|
schedule_work(&priv->idb_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tsi721_db_dpc(struct work_struct *work)
|
|
{
|
|
struct tsi721_device *priv = container_of(work, struct tsi721_device,
|
|
idb_work);
|
|
struct rio_mport *mport;
|
|
struct rio_dbell *dbell;
|
|
int found = 0;
|
|
u32 wr_ptr, rd_ptr;
|
|
u64 *idb_entry;
|
|
u32 regval;
|
|
union {
|
|
u64 msg;
|
|
u8 bytes[8];
|
|
} idb;
|
|
|
|
/*
|
|
* Process queued inbound doorbells
|
|
*/
|
|
mport = &priv->mport;
|
|
|
|
wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
|
|
rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE;
|
|
|
|
while (wr_ptr != rd_ptr) {
|
|
idb_entry = (u64 *)(priv->idb_base +
|
|
(TSI721_IDB_ENTRY_SIZE * rd_ptr));
|
|
rd_ptr++;
|
|
rd_ptr %= IDB_QSIZE;
|
|
idb.msg = *idb_entry;
|
|
*idb_entry = 0;
|
|
|
|
/* Process one doorbell */
|
|
list_for_each_entry(dbell, &mport->dbells, node) {
|
|
if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
|
|
(dbell->res->end >= DBELL_INF(idb.bytes))) {
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (found) {
|
|
dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
|
|
DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
|
|
} else {
|
|
tsi_debug(DBELL, &priv->pdev->dev,
|
|
"spurious IDB sid %2.2x tid %2.2x info %4.4x",
|
|
DBELL_SID(idb.bytes), DBELL_TID(idb.bytes),
|
|
DBELL_INF(idb.bytes));
|
|
}
|
|
|
|
wr_ptr = ioread32(priv->regs +
|
|
TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
|
|
}
|
|
|
|
iowrite32(rd_ptr & (IDB_QSIZE - 1),
|
|
priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
|
|
|
|
/* Re-enable IDB interrupts */
|
|
regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
|
|
regval |= TSI721_SR_CHINT_IDBQRCV;
|
|
iowrite32(regval,
|
|
priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
|
|
|
|
wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
|
|
if (wr_ptr != rd_ptr)
|
|
schedule_work(&priv->idb_work);
|
|
}
|
|
|
|
/**
|
|
* tsi721_irqhandler - Tsi721 interrupt handler
|
|
* @irq: Linux interrupt number
|
|
* @ptr: Pointer to interrupt-specific data (tsi721_device structure)
|
|
*
|
|
* Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
|
|
* interrupt events and calls an event-specific handler(s).
|
|
*/
|
|
static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
|
|
{
|
|
struct tsi721_device *priv = (struct tsi721_device *)ptr;
|
|
u32 dev_int;
|
|
u32 dev_ch_int;
|
|
u32 intval;
|
|
u32 ch_inte;
|
|
|
|
/* For MSI mode disable all device-level interrupts */
|
|
if (priv->flags & TSI721_USING_MSI)
|
|
iowrite32(0, priv->regs + TSI721_DEV_INTE);
|
|
|
|
dev_int = ioread32(priv->regs + TSI721_DEV_INT);
|
|
if (!dev_int)
|
|
return IRQ_NONE;
|
|
|
|
dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
|
|
|
|
if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
|
|
/* Service SR2PC Channel interrupts */
|
|
if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
|
|
/* Service Inbound Doorbell interrupt */
|
|
intval = ioread32(priv->regs +
|
|
TSI721_SR_CHINT(IDB_QUEUE));
|
|
if (intval & TSI721_SR_CHINT_IDBQRCV)
|
|
tsi721_dbell_handler(priv);
|
|
else
|
|
tsi_info(&priv->pdev->dev,
|
|
"Unsupported SR_CH_INT %x", intval);
|
|
|
|
/* Clear interrupts */
|
|
iowrite32(intval,
|
|
priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
|
|
ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
|
|
}
|
|
}
|
|
|
|
if (dev_int & TSI721_DEV_INT_SMSG_CH) {
|
|
int ch;
|
|
|
|
/*
|
|
* Service channel interrupts from Messaging Engine
|
|
*/
|
|
|
|
if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
|
|
/* Disable signaled OB MSG Channel interrupts */
|
|
ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
|
|
ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
|
|
iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
|
|
|
|
/*
|
|
* Process Inbound Message interrupt for each MBOX
|
|
*/
|
|
for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
|
|
if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
|
|
continue;
|
|
tsi721_imsg_handler(priv, ch);
|
|
}
|
|
}
|
|
|
|
if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
|
|
/* Disable signaled OB MSG Channel interrupts */
|
|
ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
|
|
ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
|
|
iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
|
|
|
|
/*
|
|
* Process Outbound Message interrupts for each MBOX
|
|
*/
|
|
|
|
for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
|
|
if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
|
|
continue;
|
|
tsi721_omsg_handler(priv, ch);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (dev_int & TSI721_DEV_INT_SRIO) {
|
|
/* Service SRIO MAC interrupts */
|
|
intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
|
|
if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
|
|
tsi721_pw_handler(priv);
|
|
}
|
|
|
|
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
|
|
if (dev_int & TSI721_DEV_INT_BDMA_CH) {
|
|
int ch;
|
|
|
|
if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) {
|
|
tsi_debug(DMA, &priv->pdev->dev,
|
|
"IRQ from DMA channel 0x%08x", dev_ch_int);
|
|
|
|
for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) {
|
|
if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch)))
|
|
continue;
|
|
tsi721_bdma_handler(&priv->bdma[ch]);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* For MSI mode re-enable device-level interrupts */
|
|
if (priv->flags & TSI721_USING_MSI) {
|
|
dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
|
|
TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
|
|
iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void tsi721_interrupts_init(struct tsi721_device *priv)
|
|
{
|
|
u32 intr;
|
|
|
|
/* Enable IDB interrupts */
|
|
iowrite32(TSI721_SR_CHINT_ALL,
|
|
priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
|
|
iowrite32(TSI721_SR_CHINT_IDBQRCV,
|
|
priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
|
|
|
|
/* Enable SRIO MAC interrupts */
|
|
iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
|
|
priv->regs + TSI721_RIO_EM_DEV_INT_EN);
|
|
|
|
/* Enable interrupts from channels in use */
|
|
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
|
|
intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) |
|
|
(TSI721_INT_BDMA_CHAN_M &
|
|
~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT));
|
|
#else
|
|
intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE);
|
|
#endif
|
|
iowrite32(intr, priv->regs + TSI721_DEV_CHAN_INTE);
|
|
|
|
if (priv->flags & TSI721_USING_MSIX)
|
|
intr = TSI721_DEV_INT_SRIO;
|
|
else
|
|
intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
|
|
TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
|
|
|
|
iowrite32(intr, priv->regs + TSI721_DEV_INTE);
|
|
ioread32(priv->regs + TSI721_DEV_INTE);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
/**
|
|
* tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
|
|
* @irq: Linux interrupt number
|
|
* @ptr: Pointer to interrupt-specific data (tsi721_device structure)
|
|
*
|
|
* Handles outbound messaging interrupts signaled using MSI-X.
|
|
*/
|
|
static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
|
|
{
|
|
struct tsi721_device *priv = (struct tsi721_device *)ptr;
|
|
int mbox;
|
|
|
|
mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
|
|
tsi721_omsg_handler(priv, mbox);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
|
|
* @irq: Linux interrupt number
|
|
* @ptr: Pointer to interrupt-specific data (tsi721_device structure)
|
|
*
|
|
* Handles inbound messaging interrupts signaled using MSI-X.
|
|
*/
|
|
static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
|
|
{
|
|
struct tsi721_device *priv = (struct tsi721_device *)ptr;
|
|
int mbox;
|
|
|
|
mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
|
|
tsi721_imsg_handler(priv, mbox + 4);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
|
|
* @irq: Linux interrupt number
|
|
* @ptr: Pointer to interrupt-specific data (tsi721_device structure)
|
|
*
|
|
* Handles Tsi721 interrupts from SRIO MAC.
|
|
*/
|
|
static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
|
|
{
|
|
struct tsi721_device *priv = (struct tsi721_device *)ptr;
|
|
u32 srio_int;
|
|
|
|
/* Service SRIO MAC interrupts */
|
|
srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
|
|
if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
|
|
tsi721_pw_handler(priv);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
|
|
* @irq: Linux interrupt number
|
|
* @ptr: Pointer to interrupt-specific data (tsi721_device structure)
|
|
*
|
|
* Handles Tsi721 interrupts from SR2PC Channel.
|
|
* NOTE: At this moment services only one SR2PC channel associated with inbound
|
|
* doorbells.
|
|
*/
|
|
static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
|
|
{
|
|
struct tsi721_device *priv = (struct tsi721_device *)ptr;
|
|
u32 sr_ch_int;
|
|
|
|
/* Service Inbound DB interrupt from SR2PC channel */
|
|
sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
|
|
if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
|
|
tsi721_dbell_handler(priv);
|
|
|
|
/* Clear interrupts */
|
|
iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
|
|
/* Read back to ensure that interrupt was cleared */
|
|
sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* tsi721_request_msix - register interrupt service for MSI-X mode.
|
|
* @priv: tsi721 device-specific data structure
|
|
*
|
|
* Registers MSI-X interrupt service routines for interrupts that are active
|
|
* immediately after mport initialization. Messaging interrupt service routines
|
|
* should be registered during corresponding open requests.
|
|
*/
|
|
static int tsi721_request_msix(struct tsi721_device *priv)
|
|
{
|
|
int err = 0;
|
|
|
|
err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
|
|
tsi721_sr2pc_ch_msix, 0,
|
|
priv->msix[TSI721_VECT_IDB].irq_name, (void *)priv);
|
|
if (err)
|
|
return err;
|
|
|
|
err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
|
|
tsi721_srio_msix, 0,
|
|
priv->msix[TSI721_VECT_PWRX].irq_name, (void *)priv);
|
|
if (err) {
|
|
free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
|
|
* @priv: pointer to tsi721 private data
|
|
*
|
|
* Configures MSI-X support for Tsi721. Supports only an exact number
|
|
* of requested vectors.
|
|
*/
|
|
static int tsi721_enable_msix(struct tsi721_device *priv)
|
|
{
|
|
struct msix_entry entries[TSI721_VECT_MAX];
|
|
int err;
|
|
int i;
|
|
|
|
entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
|
|
entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
|
|
|
|
/*
|
|
* Initialize MSI-X entries for Messaging Engine:
|
|
* this driver supports four RIO mailboxes (inbound and outbound)
|
|
* NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
|
|
* offset +4 is added to IB MBOX number.
|
|
*/
|
|
for (i = 0; i < RIO_MAX_MBOX; i++) {
|
|
entries[TSI721_VECT_IMB0_RCV + i].entry =
|
|
TSI721_MSIX_IMSG_DQ_RCV(i + 4);
|
|
entries[TSI721_VECT_IMB0_INT + i].entry =
|
|
TSI721_MSIX_IMSG_INT(i + 4);
|
|
entries[TSI721_VECT_OMB0_DONE + i].entry =
|
|
TSI721_MSIX_OMSG_DONE(i);
|
|
entries[TSI721_VECT_OMB0_INT + i].entry =
|
|
TSI721_MSIX_OMSG_INT(i);
|
|
}
|
|
|
|
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
|
|
/*
|
|
* Initialize MSI-X entries for Block DMA Engine:
|
|
* this driver supports XXX DMA channels
|
|
* (one is reserved for SRIO maintenance transactions)
|
|
*/
|
|
for (i = 0; i < TSI721_DMA_CHNUM; i++) {
|
|
entries[TSI721_VECT_DMA0_DONE + i].entry =
|
|
TSI721_MSIX_DMACH_DONE(i);
|
|
entries[TSI721_VECT_DMA0_INT + i].entry =
|
|
TSI721_MSIX_DMACH_INT(i);
|
|
}
|
|
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
|
|
|
|
err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries));
|
|
if (err) {
|
|
tsi_err(&priv->pdev->dev,
|
|
"Failed to enable MSI-X (err=%d)", err);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Copy MSI-X vector information into tsi721 private structure
|
|
*/
|
|
priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
|
|
snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
|
|
DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
|
|
priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
|
|
snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
|
|
DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
|
|
|
|
for (i = 0; i < RIO_MAX_MBOX; i++) {
|
|
priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
|
|
entries[TSI721_VECT_IMB0_RCV + i].vector;
|
|
snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
|
|
IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
|
|
i, pci_name(priv->pdev));
|
|
|
|
priv->msix[TSI721_VECT_IMB0_INT + i].vector =
|
|
entries[TSI721_VECT_IMB0_INT + i].vector;
|
|
snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
|
|
IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
|
|
i, pci_name(priv->pdev));
|
|
|
|
priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
|
|
entries[TSI721_VECT_OMB0_DONE + i].vector;
|
|
snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
|
|
IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
|
|
i, pci_name(priv->pdev));
|
|
|
|
priv->msix[TSI721_VECT_OMB0_INT + i].vector =
|
|
entries[TSI721_VECT_OMB0_INT + i].vector;
|
|
snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
|
|
IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
|
|
i, pci_name(priv->pdev));
|
|
}
|
|
|
|
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
|
|
for (i = 0; i < TSI721_DMA_CHNUM; i++) {
|
|
priv->msix[TSI721_VECT_DMA0_DONE + i].vector =
|
|
entries[TSI721_VECT_DMA0_DONE + i].vector;
|
|
snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name,
|
|
IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s",
|
|
i, pci_name(priv->pdev));
|
|
|
|
priv->msix[TSI721_VECT_DMA0_INT + i].vector =
|
|
entries[TSI721_VECT_DMA0_INT + i].vector;
|
|
snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name,
|
|
IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s",
|
|
i, pci_name(priv->pdev));
|
|
}
|
|
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
static int tsi721_request_irq(struct tsi721_device *priv)
|
|
{
|
|
int err;
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
if (priv->flags & TSI721_USING_MSIX)
|
|
err = tsi721_request_msix(priv);
|
|
else
|
|
#endif
|
|
err = request_irq(priv->pdev->irq, tsi721_irqhandler,
|
|
(priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
|
|
DRV_NAME, (void *)priv);
|
|
|
|
if (err)
|
|
tsi_err(&priv->pdev->dev,
|
|
"Unable to allocate interrupt, err=%d", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void tsi721_free_irq(struct tsi721_device *priv)
|
|
{
|
|
#ifdef CONFIG_PCI_MSI
|
|
if (priv->flags & TSI721_USING_MSIX) {
|
|
free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
|
|
free_irq(priv->msix[TSI721_VECT_PWRX].vector, (void *)priv);
|
|
} else
|
|
#endif
|
|
free_irq(priv->pdev->irq, (void *)priv);
|
|
}
|
|
|
|
static int
|
|
tsi721_obw_alloc(struct tsi721_device *priv, struct tsi721_obw_bar *pbar,
|
|
u32 size, int *win_id)
|
|
{
|
|
u64 win_base;
|
|
u64 bar_base;
|
|
u64 bar_end;
|
|
u32 align;
|
|
struct tsi721_ob_win *win;
|
|
struct tsi721_ob_win *new_win = NULL;
|
|
int new_win_idx = -1;
|
|
int i = 0;
|
|
|
|
bar_base = pbar->base;
|
|
bar_end = bar_base + pbar->size;
|
|
win_base = bar_base;
|
|
align = size/TSI721_PC2SR_ZONES;
|
|
|
|
while (i < TSI721_IBWIN_NUM) {
|
|
for (i = 0; i < TSI721_IBWIN_NUM; i++) {
|
|
if (!priv->ob_win[i].active) {
|
|
if (new_win == NULL) {
|
|
new_win = &priv->ob_win[i];
|
|
new_win_idx = i;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If this window belongs to the current BAR check it
|
|
* for overlap
|
|
*/
|
|
win = &priv->ob_win[i];
|
|
|
|
if (win->base >= bar_base && win->base < bar_end) {
|
|
if (win_base < (win->base + win->size) &&
|
|
(win_base + size) > win->base) {
|
|
/* Overlap detected */
|
|
win_base = win->base + win->size;
|
|
win_base = ALIGN(win_base, align);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (win_base + size > bar_end)
|
|
return -ENOMEM;
|
|
|
|
if (!new_win) {
|
|
tsi_err(&priv->pdev->dev, "OBW count tracking failed");
|
|
return -EIO;
|
|
}
|
|
|
|
new_win->active = true;
|
|
new_win->base = win_base;
|
|
new_win->size = size;
|
|
new_win->pbar = pbar;
|
|
priv->obwin_cnt--;
|
|
pbar->free -= size;
|
|
*win_id = new_win_idx;
|
|
return 0;
|
|
}
|
|
|
|
static int tsi721_map_outb_win(struct rio_mport *mport, u16 destid, u64 rstart,
|
|
u32 size, u32 flags, dma_addr_t *laddr)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
int i;
|
|
struct tsi721_obw_bar *pbar;
|
|
struct tsi721_ob_win *ob_win;
|
|
int obw = -1;
|
|
u32 rval;
|
|
u64 rio_addr;
|
|
u32 zsize;
|
|
int ret = -ENOMEM;
|
|
|
|
tsi_debug(OBW, &priv->pdev->dev,
|
|
"did=%d ra=0x%llx sz=0x%x", destid, rstart, size);
|
|
|
|
if (!is_power_of_2(size) || (size < 0x8000) || (rstart & (size - 1)))
|
|
return -EINVAL;
|
|
|
|
if (priv->obwin_cnt == 0)
|
|
return -EBUSY;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
if (priv->p2r_bar[i].free >= size) {
|
|
pbar = &priv->p2r_bar[i];
|
|
ret = tsi721_obw_alloc(priv, pbar, size, &obw);
|
|
if (!ret)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
WARN_ON(obw == -1);
|
|
ob_win = &priv->ob_win[obw];
|
|
ob_win->destid = destid;
|
|
ob_win->rstart = rstart;
|
|
tsi_debug(OBW, &priv->pdev->dev,
|
|
"allocated OBW%d @%llx", obw, ob_win->base);
|
|
|
|
/*
|
|
* Configure Outbound Window
|
|
*/
|
|
|
|
zsize = size/TSI721_PC2SR_ZONES;
|
|
rio_addr = rstart;
|
|
|
|
/*
|
|
* Program Address Translation Zones:
|
|
* This implementation uses all 8 zones associated wit window.
|
|
*/
|
|
for (i = 0; i < TSI721_PC2SR_ZONES; i++) {
|
|
|
|
while (ioread32(priv->regs + TSI721_ZONE_SEL) &
|
|
TSI721_ZONE_SEL_GO) {
|
|
udelay(1);
|
|
}
|
|
|
|
rval = (u32)(rio_addr & TSI721_LUT_DATA0_ADD) |
|
|
TSI721_LUT_DATA0_NREAD | TSI721_LUT_DATA0_NWR;
|
|
iowrite32(rval, priv->regs + TSI721_LUT_DATA0);
|
|
rval = (u32)(rio_addr >> 32);
|
|
iowrite32(rval, priv->regs + TSI721_LUT_DATA1);
|
|
rval = destid;
|
|
iowrite32(rval, priv->regs + TSI721_LUT_DATA2);
|
|
|
|
rval = TSI721_ZONE_SEL_GO | (obw << 3) | i;
|
|
iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
|
|
|
|
rio_addr += zsize;
|
|
}
|
|
|
|
iowrite32(TSI721_OBWIN_SIZE(size) << 8,
|
|
priv->regs + TSI721_OBWINSZ(obw));
|
|
iowrite32((u32)(ob_win->base >> 32), priv->regs + TSI721_OBWINUB(obw));
|
|
iowrite32((u32)(ob_win->base & TSI721_OBWINLB_BA) | TSI721_OBWINLB_WEN,
|
|
priv->regs + TSI721_OBWINLB(obw));
|
|
|
|
*laddr = ob_win->base;
|
|
return 0;
|
|
}
|
|
|
|
static void tsi721_unmap_outb_win(struct rio_mport *mport,
|
|
u16 destid, u64 rstart)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
struct tsi721_ob_win *ob_win;
|
|
int i;
|
|
|
|
tsi_debug(OBW, &priv->pdev->dev, "did=%d ra=0x%llx", destid, rstart);
|
|
|
|
for (i = 0; i < TSI721_OBWIN_NUM; i++) {
|
|
ob_win = &priv->ob_win[i];
|
|
|
|
if (ob_win->active &&
|
|
ob_win->destid == destid && ob_win->rstart == rstart) {
|
|
tsi_debug(OBW, &priv->pdev->dev,
|
|
"free OBW%d @%llx", i, ob_win->base);
|
|
ob_win->active = false;
|
|
iowrite32(0, priv->regs + TSI721_OBWINLB(i));
|
|
ob_win->pbar->free += ob_win->size;
|
|
priv->obwin_cnt++;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
|
|
* translation regions.
|
|
* @priv: pointer to tsi721 private data
|
|
*
|
|
* Disables SREP translation regions.
|
|
*/
|
|
static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
|
|
{
|
|
int i, z;
|
|
u32 rval;
|
|
|
|
/* Disable all PC2SR translation windows */
|
|
for (i = 0; i < TSI721_OBWIN_NUM; i++)
|
|
iowrite32(0, priv->regs + TSI721_OBWINLB(i));
|
|
|
|
/* Initialize zone lookup tables to avoid ECC errors on reads */
|
|
iowrite32(0, priv->regs + TSI721_LUT_DATA0);
|
|
iowrite32(0, priv->regs + TSI721_LUT_DATA1);
|
|
iowrite32(0, priv->regs + TSI721_LUT_DATA2);
|
|
|
|
for (i = 0; i < TSI721_OBWIN_NUM; i++) {
|
|
for (z = 0; z < TSI721_PC2SR_ZONES; z++) {
|
|
while (ioread32(priv->regs + TSI721_ZONE_SEL) &
|
|
TSI721_ZONE_SEL_GO) {
|
|
udelay(1);
|
|
}
|
|
rval = TSI721_ZONE_SEL_GO | (i << 3) | z;
|
|
iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
|
|
}
|
|
}
|
|
|
|
if (priv->p2r_bar[0].size == 0 && priv->p2r_bar[1].size == 0) {
|
|
priv->obwin_cnt = 0;
|
|
return;
|
|
}
|
|
|
|
priv->p2r_bar[0].free = priv->p2r_bar[0].size;
|
|
priv->p2r_bar[1].free = priv->p2r_bar[1].size;
|
|
|
|
for (i = 0; i < TSI721_OBWIN_NUM; i++)
|
|
priv->ob_win[i].active = false;
|
|
|
|
priv->obwin_cnt = TSI721_OBWIN_NUM;
|
|
}
|
|
|
|
/**
|
|
* tsi721_rio_map_inb_mem -- Mapping inbound memory region.
|
|
* @mport: RapidIO master port
|
|
* @lstart: Local memory space start address.
|
|
* @rstart: RapidIO space start address.
|
|
* @size: The mapping region size.
|
|
* @flags: Flags for mapping. 0 for using default flags.
|
|
*
|
|
* Return: 0 -- Success.
|
|
*
|
|
* This function will create the inbound mapping
|
|
* from rstart to lstart.
|
|
*/
|
|
static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
|
|
u64 rstart, u64 size, u32 flags)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
int i, avail = -1;
|
|
u32 regval;
|
|
struct tsi721_ib_win *ib_win;
|
|
bool direct = (lstart == rstart);
|
|
u64 ibw_size;
|
|
dma_addr_t loc_start;
|
|
u64 ibw_start;
|
|
struct tsi721_ib_win_mapping *map = NULL;
|
|
int ret = -EBUSY;
|
|
|
|
/* Max IBW size supported by HW is 16GB */
|
|
if (size > 0x400000000UL)
|
|
return -EINVAL;
|
|
|
|
if (direct) {
|
|
/* Calculate minimal acceptable window size and base address */
|
|
|
|
ibw_size = roundup_pow_of_two(size);
|
|
ibw_start = lstart & ~(ibw_size - 1);
|
|
|
|
tsi_debug(IBW, &priv->pdev->dev,
|
|
"Direct (RIO_0x%llx -> PCIe_%pad), size=0x%llx, ibw_start = 0x%llx",
|
|
rstart, &lstart, size, ibw_start);
|
|
|
|
while ((lstart + size) > (ibw_start + ibw_size)) {
|
|
ibw_size *= 2;
|
|
ibw_start = lstart & ~(ibw_size - 1);
|
|
/* Check for crossing IBW max size 16GB */
|
|
if (ibw_size > 0x400000000UL)
|
|
return -EBUSY;
|
|
}
|
|
|
|
loc_start = ibw_start;
|
|
|
|
map = kzalloc(sizeof(struct tsi721_ib_win_mapping), GFP_ATOMIC);
|
|
if (map == NULL)
|
|
return -ENOMEM;
|
|
|
|
} else {
|
|
tsi_debug(IBW, &priv->pdev->dev,
|
|
"Translated (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
|
|
rstart, &lstart, size);
|
|
|
|
if (!is_power_of_2(size) || size < 0x1000 ||
|
|
((u64)lstart & (size - 1)) || (rstart & (size - 1)))
|
|
return -EINVAL;
|
|
if (priv->ibwin_cnt == 0)
|
|
return -EBUSY;
|
|
ibw_start = rstart;
|
|
ibw_size = size;
|
|
loc_start = lstart;
|
|
}
|
|
|
|
/*
|
|
* Scan for overlapping with active regions and mark the first available
|
|
* IB window at the same time.
|
|
*/
|
|
for (i = 0; i < TSI721_IBWIN_NUM; i++) {
|
|
ib_win = &priv->ib_win[i];
|
|
|
|
if (!ib_win->active) {
|
|
if (avail == -1) {
|
|
avail = i;
|
|
ret = 0;
|
|
}
|
|
} else if (ibw_start < (ib_win->rstart + ib_win->size) &&
|
|
(ibw_start + ibw_size) > ib_win->rstart) {
|
|
/* Return error if address translation involved */
|
|
if (!direct || ib_win->xlat) {
|
|
ret = -EFAULT;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Direct mappings usually are larger than originally
|
|
* requested fragments - check if this new request fits
|
|
* into it.
|
|
*/
|
|
if (rstart >= ib_win->rstart &&
|
|
(rstart + size) <= (ib_win->rstart +
|
|
ib_win->size)) {
|
|
/* We are in - no further mapping required */
|
|
map->lstart = lstart;
|
|
list_add_tail(&map->node, &ib_win->mappings);
|
|
return 0;
|
|
}
|
|
|
|
ret = -EFAULT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret)
|
|
goto out;
|
|
i = avail;
|
|
|
|
/* Sanity check: available IB window must be disabled at this point */
|
|
regval = ioread32(priv->regs + TSI721_IBWIN_LB(i));
|
|
if (WARN_ON(regval & TSI721_IBWIN_LB_WEN)) {
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
ib_win = &priv->ib_win[i];
|
|
ib_win->active = true;
|
|
ib_win->rstart = ibw_start;
|
|
ib_win->lstart = loc_start;
|
|
ib_win->size = ibw_size;
|
|
ib_win->xlat = (lstart != rstart);
|
|
INIT_LIST_HEAD(&ib_win->mappings);
|
|
|
|
/*
|
|
* When using direct IBW mapping and have larger than requested IBW size
|
|
* we can have multiple local memory blocks mapped through the same IBW
|
|
* To handle this situation we maintain list of "clients" for such IBWs.
|
|
*/
|
|
if (direct) {
|
|
map->lstart = lstart;
|
|
list_add_tail(&map->node, &ib_win->mappings);
|
|
}
|
|
|
|
iowrite32(TSI721_IBWIN_SIZE(ibw_size) << 8,
|
|
priv->regs + TSI721_IBWIN_SZ(i));
|
|
|
|
iowrite32(((u64)loc_start >> 32), priv->regs + TSI721_IBWIN_TUA(i));
|
|
iowrite32(((u64)loc_start & TSI721_IBWIN_TLA_ADD),
|
|
priv->regs + TSI721_IBWIN_TLA(i));
|
|
|
|
iowrite32(ibw_start >> 32, priv->regs + TSI721_IBWIN_UB(i));
|
|
iowrite32((ibw_start & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN,
|
|
priv->regs + TSI721_IBWIN_LB(i));
|
|
|
|
priv->ibwin_cnt--;
|
|
|
|
tsi_debug(IBW, &priv->pdev->dev,
|
|
"Configured IBWIN%d (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
|
|
i, ibw_start, &loc_start, ibw_size);
|
|
|
|
return 0;
|
|
out:
|
|
kfree(map);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* tsi721_rio_unmap_inb_mem -- Unmapping inbound memory region.
|
|
* @mport: RapidIO master port
|
|
* @lstart: Local memory space start address.
|
|
*/
|
|
static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport,
|
|
dma_addr_t lstart)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
struct tsi721_ib_win *ib_win;
|
|
int i;
|
|
|
|
tsi_debug(IBW, &priv->pdev->dev,
|
|
"Unmap IBW mapped to PCIe_%pad", &lstart);
|
|
|
|
/* Search for matching active inbound translation window */
|
|
for (i = 0; i < TSI721_IBWIN_NUM; i++) {
|
|
ib_win = &priv->ib_win[i];
|
|
|
|
/* Address translating IBWs must to be an exact march */
|
|
if (!ib_win->active ||
|
|
(ib_win->xlat && lstart != ib_win->lstart))
|
|
continue;
|
|
|
|
if (lstart >= ib_win->lstart &&
|
|
lstart < (ib_win->lstart + ib_win->size)) {
|
|
|
|
if (!ib_win->xlat) {
|
|
struct tsi721_ib_win_mapping *map;
|
|
int found = 0;
|
|
|
|
list_for_each_entry(map,
|
|
&ib_win->mappings, node) {
|
|
if (map->lstart == lstart) {
|
|
list_del(&map->node);
|
|
kfree(map);
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found)
|
|
continue;
|
|
|
|
if (!list_empty(&ib_win->mappings))
|
|
break;
|
|
}
|
|
|
|
tsi_debug(IBW, &priv->pdev->dev, "Disable IBWIN_%d", i);
|
|
iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
|
|
ib_win->active = false;
|
|
priv->ibwin_cnt++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == TSI721_IBWIN_NUM)
|
|
tsi_debug(IBW, &priv->pdev->dev,
|
|
"IB window mapped to %pad not found", &lstart);
|
|
}
|
|
|
|
/**
|
|
* tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
|
|
* translation regions.
|
|
* @priv: pointer to tsi721 private data
|
|
*
|
|
* Disables inbound windows.
|
|
*/
|
|
static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
|
|
{
|
|
int i;
|
|
|
|
/* Disable all SR2PC inbound windows */
|
|
for (i = 0; i < TSI721_IBWIN_NUM; i++)
|
|
iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
|
|
priv->ibwin_cnt = TSI721_IBWIN_NUM;
|
|
}
|
|
|
|
/*
|
|
* tsi721_close_sr2pc_mapping - closes all active inbound (SRIO->PCIe)
|
|
* translation regions.
|
|
* @priv: pointer to tsi721 device private data
|
|
*/
|
|
static void tsi721_close_sr2pc_mapping(struct tsi721_device *priv)
|
|
{
|
|
struct tsi721_ib_win *ib_win;
|
|
int i;
|
|
|
|
/* Disable all active SR2PC inbound windows */
|
|
for (i = 0; i < TSI721_IBWIN_NUM; i++) {
|
|
ib_win = &priv->ib_win[i];
|
|
if (ib_win->active) {
|
|
iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
|
|
ib_win->active = false;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* tsi721_port_write_init - Inbound port write interface init
|
|
* @priv: pointer to tsi721 private data
|
|
*
|
|
* Initializes inbound port write handler.
|
|
* Returns %0 on success or %-ENOMEM on failure.
|
|
*/
|
|
static int tsi721_port_write_init(struct tsi721_device *priv)
|
|
{
|
|
priv->pw_discard_count = 0;
|
|
INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
|
|
spin_lock_init(&priv->pw_fifo_lock);
|
|
if (kfifo_alloc(&priv->pw_fifo,
|
|
TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
|
|
tsi_err(&priv->pdev->dev, "PW FIFO allocation failed");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Use reliable port-write capture mode */
|
|
iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
|
|
return 0;
|
|
}
|
|
|
|
static void tsi721_port_write_free(struct tsi721_device *priv)
|
|
{
|
|
kfifo_free(&priv->pw_fifo);
|
|
}
|
|
|
|
static int tsi721_doorbell_init(struct tsi721_device *priv)
|
|
{
|
|
/* Outbound Doorbells do not require any setup.
|
|
* Tsi721 uses dedicated PCI BAR1 to generate doorbells.
|
|
* That BAR1 was mapped during the probe routine.
|
|
*/
|
|
|
|
/* Initialize Inbound Doorbell processing DPC and queue */
|
|
priv->db_discard_count = 0;
|
|
INIT_WORK(&priv->idb_work, tsi721_db_dpc);
|
|
|
|
/* Allocate buffer for inbound doorbells queue */
|
|
priv->idb_base = dma_alloc_coherent(&priv->pdev->dev,
|
|
IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
|
|
&priv->idb_dma, GFP_KERNEL);
|
|
if (!priv->idb_base)
|
|
return -ENOMEM;
|
|
|
|
tsi_debug(DBELL, &priv->pdev->dev,
|
|
"Allocated IDB buffer @ %p (phys = %pad)",
|
|
priv->idb_base, &priv->idb_dma);
|
|
|
|
iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
|
|
priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
|
|
iowrite32(((u64)priv->idb_dma >> 32),
|
|
priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
|
|
iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
|
|
priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
|
|
/* Enable accepting all inbound doorbells */
|
|
iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
|
|
|
|
iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
|
|
|
|
iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tsi721_doorbell_free(struct tsi721_device *priv)
|
|
{
|
|
if (priv->idb_base == NULL)
|
|
return;
|
|
|
|
/* Free buffer allocated for inbound doorbell queue */
|
|
dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
|
|
priv->idb_base, priv->idb_dma);
|
|
priv->idb_base = NULL;
|
|
}
|
|
|
|
/**
|
|
* tsi721_bdma_maint_init - Initialize maintenance request BDMA channel.
|
|
* @priv: pointer to tsi721 private data
|
|
*
|
|
* Initialize BDMA channel allocated for RapidIO maintenance read/write
|
|
* request generation
|
|
* Returns %0 on success or %-ENOMEM on failure.
|
|
*/
|
|
static int tsi721_bdma_maint_init(struct tsi721_device *priv)
|
|
{
|
|
struct tsi721_dma_desc *bd_ptr;
|
|
u64 *sts_ptr;
|
|
dma_addr_t bd_phys, sts_phys;
|
|
int sts_size;
|
|
int bd_num = 2;
|
|
void __iomem *regs;
|
|
|
|
tsi_debug(MAINT, &priv->pdev->dev,
|
|
"Init BDMA_%d Maintenance requests", TSI721_DMACH_MAINT);
|
|
|
|
/*
|
|
* Initialize DMA channel for maintenance requests
|
|
*/
|
|
|
|
priv->mdma.ch_id = TSI721_DMACH_MAINT;
|
|
regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT);
|
|
|
|
/* Allocate space for DMA descriptors */
|
|
bd_ptr = dma_alloc_coherent(&priv->pdev->dev,
|
|
bd_num * sizeof(struct tsi721_dma_desc),
|
|
&bd_phys, GFP_KERNEL);
|
|
if (!bd_ptr)
|
|
return -ENOMEM;
|
|
|
|
priv->mdma.bd_num = bd_num;
|
|
priv->mdma.bd_phys = bd_phys;
|
|
priv->mdma.bd_base = bd_ptr;
|
|
|
|
tsi_debug(MAINT, &priv->pdev->dev, "DMA descriptors @ %p (phys = %pad)",
|
|
bd_ptr, &bd_phys);
|
|
|
|
/* Allocate space for descriptor status FIFO */
|
|
sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
|
|
bd_num : TSI721_DMA_MINSTSSZ;
|
|
sts_size = roundup_pow_of_two(sts_size);
|
|
sts_ptr = dma_alloc_coherent(&priv->pdev->dev,
|
|
sts_size * sizeof(struct tsi721_dma_sts),
|
|
&sts_phys, GFP_KERNEL);
|
|
if (!sts_ptr) {
|
|
/* Free space allocated for DMA descriptors */
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
bd_num * sizeof(struct tsi721_dma_desc),
|
|
bd_ptr, bd_phys);
|
|
priv->mdma.bd_base = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv->mdma.sts_phys = sts_phys;
|
|
priv->mdma.sts_base = sts_ptr;
|
|
priv->mdma.sts_size = sts_size;
|
|
|
|
tsi_debug(MAINT, &priv->pdev->dev,
|
|
"desc status FIFO @ %p (phys = %pad) size=0x%x",
|
|
sts_ptr, &sts_phys, sts_size);
|
|
|
|
/* Initialize DMA descriptors ring */
|
|
bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
|
|
bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
|
|
TSI721_DMAC_DPTRL_MASK);
|
|
bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
|
|
|
|
/* Setup DMA descriptor pointers */
|
|
iowrite32(((u64)bd_phys >> 32), regs + TSI721_DMAC_DPTRH);
|
|
iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
|
|
regs + TSI721_DMAC_DPTRL);
|
|
|
|
/* Setup descriptor status FIFO */
|
|
iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH);
|
|
iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
|
|
regs + TSI721_DMAC_DSBL);
|
|
iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
|
|
regs + TSI721_DMAC_DSSZ);
|
|
|
|
/* Clear interrupt bits */
|
|
iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
|
|
|
|
ioread32(regs + TSI721_DMAC_INT);
|
|
|
|
/* Toggle DMA channel initialization */
|
|
iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
|
|
ioread32(regs + TSI721_DMAC_CTL);
|
|
udelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tsi721_bdma_maint_free(struct tsi721_device *priv)
|
|
{
|
|
u32 ch_stat;
|
|
struct tsi721_bdma_maint *mdma = &priv->mdma;
|
|
void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id);
|
|
|
|
if (mdma->bd_base == NULL)
|
|
return 0;
|
|
|
|
/* Check if DMA channel still running */
|
|
ch_stat = ioread32(regs + TSI721_DMAC_STS);
|
|
if (ch_stat & TSI721_DMAC_STS_RUN)
|
|
return -EFAULT;
|
|
|
|
/* Put DMA channel into init state */
|
|
iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
|
|
|
|
/* Free space allocated for DMA descriptors */
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
mdma->bd_num * sizeof(struct tsi721_dma_desc),
|
|
mdma->bd_base, mdma->bd_phys);
|
|
mdma->bd_base = NULL;
|
|
|
|
/* Free space allocated for status FIFO */
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
mdma->sts_size * sizeof(struct tsi721_dma_sts),
|
|
mdma->sts_base, mdma->sts_phys);
|
|
mdma->sts_base = NULL;
|
|
return 0;
|
|
}
|
|
|
|
/* Enable Inbound Messaging Interrupts */
|
|
static void
|
|
tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
|
|
u32 inte_mask)
|
|
{
|
|
u32 rval;
|
|
|
|
if (!inte_mask)
|
|
return;
|
|
|
|
/* Clear pending Inbound Messaging interrupts */
|
|
iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
|
|
|
|
/* Enable Inbound Messaging interrupts */
|
|
rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
|
|
iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
|
|
|
|
if (priv->flags & TSI721_USING_MSIX)
|
|
return; /* Finished if we are in MSI-X mode */
|
|
|
|
/*
|
|
* For MSI and INTA interrupt signalling we need to enable next levels
|
|
*/
|
|
|
|
/* Enable Device Channel Interrupt */
|
|
rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
|
|
iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
|
|
priv->regs + TSI721_DEV_CHAN_INTE);
|
|
}
|
|
|
|
/* Disable Inbound Messaging Interrupts */
|
|
static void
|
|
tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
|
|
u32 inte_mask)
|
|
{
|
|
u32 rval;
|
|
|
|
if (!inte_mask)
|
|
return;
|
|
|
|
/* Clear pending Inbound Messaging interrupts */
|
|
iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
|
|
|
|
/* Disable Inbound Messaging interrupts */
|
|
rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
|
|
rval &= ~inte_mask;
|
|
iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
|
|
|
|
if (priv->flags & TSI721_USING_MSIX)
|
|
return; /* Finished if we are in MSI-X mode */
|
|
|
|
/*
|
|
* For MSI and INTA interrupt signalling we need to disable next levels
|
|
*/
|
|
|
|
/* Disable Device Channel Interrupt */
|
|
rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
|
|
rval &= ~TSI721_INT_IMSG_CHAN(ch);
|
|
iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
|
|
}
|
|
|
|
/* Enable Outbound Messaging interrupts */
|
|
static void
|
|
tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
|
|
u32 inte_mask)
|
|
{
|
|
u32 rval;
|
|
|
|
if (!inte_mask)
|
|
return;
|
|
|
|
/* Clear pending Outbound Messaging interrupts */
|
|
iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
|
|
|
|
/* Enable Outbound Messaging channel interrupts */
|
|
rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
|
|
iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
|
|
|
|
if (priv->flags & TSI721_USING_MSIX)
|
|
return; /* Finished if we are in MSI-X mode */
|
|
|
|
/*
|
|
* For MSI and INTA interrupt signalling we need to enable next levels
|
|
*/
|
|
|
|
/* Enable Device Channel Interrupt */
|
|
rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
|
|
iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
|
|
priv->regs + TSI721_DEV_CHAN_INTE);
|
|
}
|
|
|
|
/* Disable Outbound Messaging interrupts */
|
|
static void
|
|
tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
|
|
u32 inte_mask)
|
|
{
|
|
u32 rval;
|
|
|
|
if (!inte_mask)
|
|
return;
|
|
|
|
/* Clear pending Outbound Messaging interrupts */
|
|
iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
|
|
|
|
/* Disable Outbound Messaging interrupts */
|
|
rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
|
|
rval &= ~inte_mask;
|
|
iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
|
|
|
|
if (priv->flags & TSI721_USING_MSIX)
|
|
return; /* Finished if we are in MSI-X mode */
|
|
|
|
/*
|
|
* For MSI and INTA interrupt signalling we need to disable next levels
|
|
*/
|
|
|
|
/* Disable Device Channel Interrupt */
|
|
rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
|
|
rval &= ~TSI721_INT_OMSG_CHAN(ch);
|
|
iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
|
|
}
|
|
|
|
/**
|
|
* tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
|
|
* @mport: Master port with outbound message queue
|
|
* @rdev: Target of outbound message
|
|
* @mbox: Outbound mailbox
|
|
* @buffer: Message to add to outbound queue
|
|
* @len: Length of message
|
|
*/
|
|
static int
|
|
tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
|
|
void *buffer, size_t len)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
struct tsi721_omsg_desc *desc;
|
|
u32 tx_slot;
|
|
unsigned long flags;
|
|
|
|
if (!priv->omsg_init[mbox] ||
|
|
len > TSI721_MSG_MAX_SIZE || len < 8)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&priv->omsg_ring[mbox].lock, flags);
|
|
|
|
tx_slot = priv->omsg_ring[mbox].tx_slot;
|
|
|
|
/* Copy copy message into transfer buffer */
|
|
memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
|
|
|
|
if (len & 0x7)
|
|
len += 8;
|
|
|
|
/* Build descriptor associated with buffer */
|
|
desc = priv->omsg_ring[mbox].omd_base;
|
|
desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
|
|
#ifdef TSI721_OMSG_DESC_INT
|
|
/* Request IOF_DONE interrupt generation for each N-th frame in queue */
|
|
if (tx_slot % 4 == 0)
|
|
desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
|
|
#endif
|
|
desc[tx_slot].msg_info =
|
|
cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
|
|
(0xe << 12) | (len & 0xff8));
|
|
desc[tx_slot].bufptr_lo =
|
|
cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
|
|
0xffffffff);
|
|
desc[tx_slot].bufptr_hi =
|
|
cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
|
|
|
|
priv->omsg_ring[mbox].wr_count++;
|
|
|
|
/* Go to next descriptor */
|
|
if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
|
|
priv->omsg_ring[mbox].tx_slot = 0;
|
|
/* Move through the ring link descriptor at the end */
|
|
priv->omsg_ring[mbox].wr_count++;
|
|
}
|
|
|
|
mb();
|
|
|
|
/* Set new write count value */
|
|
iowrite32(priv->omsg_ring[mbox].wr_count,
|
|
priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
|
|
ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
|
|
|
|
spin_unlock_irqrestore(&priv->omsg_ring[mbox].lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tsi721_omsg_handler - Outbound Message Interrupt Handler
|
|
* @priv: pointer to tsi721 private data
|
|
* @ch: number of OB MSG channel to service
|
|
*
|
|
* Services channel interrupts from outbound messaging engine.
|
|
*/
|
|
static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
|
|
{
|
|
u32 omsg_int;
|
|
struct rio_mport *mport = &priv->mport;
|
|
void *dev_id = NULL;
|
|
u32 tx_slot = 0xffffffff;
|
|
int do_callback = 0;
|
|
|
|
spin_lock(&priv->omsg_ring[ch].lock);
|
|
|
|
omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
|
|
|
|
if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
|
|
tsi_info(&priv->pdev->dev,
|
|
"OB MBOX%d: Status FIFO is full", ch);
|
|
|
|
if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
|
|
u32 srd_ptr;
|
|
u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
|
|
int i, j;
|
|
|
|
/*
|
|
* Find last successfully processed descriptor
|
|
*/
|
|
|
|
/* Check and clear descriptor status FIFO entries */
|
|
srd_ptr = priv->omsg_ring[ch].sts_rdptr;
|
|
sts_ptr = priv->omsg_ring[ch].sts_base;
|
|
j = srd_ptr * 8;
|
|
while (sts_ptr[j]) {
|
|
for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
|
|
prev_ptr = last_ptr;
|
|
last_ptr = le64_to_cpu(sts_ptr[j]);
|
|
sts_ptr[j] = 0;
|
|
}
|
|
|
|
++srd_ptr;
|
|
srd_ptr %= priv->omsg_ring[ch].sts_size;
|
|
j = srd_ptr * 8;
|
|
}
|
|
|
|
if (last_ptr == 0)
|
|
goto no_sts_update;
|
|
|
|
priv->omsg_ring[ch].sts_rdptr = srd_ptr;
|
|
iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
|
|
|
|
if (!mport->outb_msg[ch].mcback)
|
|
goto no_sts_update;
|
|
|
|
/* Inform upper layer about transfer completion */
|
|
|
|
tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
|
|
sizeof(struct tsi721_omsg_desc);
|
|
|
|
/*
|
|
* Check if this is a Link Descriptor (LD).
|
|
* If yes, ignore LD and use descriptor processed
|
|
* before LD.
|
|
*/
|
|
if (tx_slot == priv->omsg_ring[ch].size) {
|
|
if (prev_ptr)
|
|
tx_slot = (prev_ptr -
|
|
(u64)priv->omsg_ring[ch].omd_phys)/
|
|
sizeof(struct tsi721_omsg_desc);
|
|
else
|
|
goto no_sts_update;
|
|
}
|
|
|
|
if (tx_slot >= priv->omsg_ring[ch].size)
|
|
tsi_debug(OMSG, &priv->pdev->dev,
|
|
"OB_MSG tx_slot=%x > size=%x",
|
|
tx_slot, priv->omsg_ring[ch].size);
|
|
WARN_ON(tx_slot >= priv->omsg_ring[ch].size);
|
|
|
|
/* Move slot index to the next message to be sent */
|
|
++tx_slot;
|
|
if (tx_slot == priv->omsg_ring[ch].size)
|
|
tx_slot = 0;
|
|
|
|
dev_id = priv->omsg_ring[ch].dev_id;
|
|
do_callback = 1;
|
|
}
|
|
|
|
no_sts_update:
|
|
|
|
if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
|
|
/*
|
|
* Outbound message operation aborted due to error,
|
|
* reinitialize OB MSG channel
|
|
*/
|
|
|
|
tsi_debug(OMSG, &priv->pdev->dev, "OB MSG ABORT ch_stat=%x",
|
|
ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
|
|
|
|
iowrite32(TSI721_OBDMAC_INT_ERROR,
|
|
priv->regs + TSI721_OBDMAC_INT(ch));
|
|
iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
|
|
priv->regs + TSI721_OBDMAC_CTL(ch));
|
|
ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
|
|
|
|
/* Inform upper level to clear all pending tx slots */
|
|
dev_id = priv->omsg_ring[ch].dev_id;
|
|
tx_slot = priv->omsg_ring[ch].tx_slot;
|
|
do_callback = 1;
|
|
|
|
/* Synch tx_slot tracking */
|
|
iowrite32(priv->omsg_ring[ch].tx_slot,
|
|
priv->regs + TSI721_OBDMAC_DRDCNT(ch));
|
|
ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
|
|
priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
|
|
priv->omsg_ring[ch].sts_rdptr = 0;
|
|
}
|
|
|
|
/* Clear channel interrupts */
|
|
iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
|
|
|
|
if (!(priv->flags & TSI721_USING_MSIX)) {
|
|
u32 ch_inte;
|
|
|
|
/* Re-enable channel interrupts */
|
|
ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
|
|
ch_inte |= TSI721_INT_OMSG_CHAN(ch);
|
|
iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
|
|
}
|
|
|
|
spin_unlock(&priv->omsg_ring[ch].lock);
|
|
|
|
if (mport->outb_msg[ch].mcback && do_callback)
|
|
mport->outb_msg[ch].mcback(mport, dev_id, ch, tx_slot);
|
|
}
|
|
|
|
/**
|
|
* tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
|
|
* @mport: Master port implementing Outbound Messaging Engine
|
|
* @dev_id: Device specific pointer to pass on event
|
|
* @mbox: Mailbox to open
|
|
* @entries: Number of entries in the outbound mailbox ring
|
|
*/
|
|
static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
|
|
int mbox, int entries)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
struct tsi721_omsg_desc *bd_ptr;
|
|
int i, rc = 0;
|
|
|
|
if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
|
|
(entries > (TSI721_OMSGD_RING_SIZE)) ||
|
|
(!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if ((mbox_sel & (1 << mbox)) == 0) {
|
|
rc = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
priv->omsg_ring[mbox].dev_id = dev_id;
|
|
priv->omsg_ring[mbox].size = entries;
|
|
priv->omsg_ring[mbox].sts_rdptr = 0;
|
|
spin_lock_init(&priv->omsg_ring[mbox].lock);
|
|
|
|
/* Outbound Msg Buffer allocation based on
|
|
the number of maximum descriptor entries */
|
|
for (i = 0; i < entries; i++) {
|
|
priv->omsg_ring[mbox].omq_base[i] =
|
|
dma_alloc_coherent(
|
|
&priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
|
|
&priv->omsg_ring[mbox].omq_phys[i],
|
|
GFP_KERNEL);
|
|
if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
|
|
tsi_debug(OMSG, &priv->pdev->dev,
|
|
"ENOMEM for OB_MSG_%d data buffer", mbox);
|
|
rc = -ENOMEM;
|
|
goto out_buf;
|
|
}
|
|
}
|
|
|
|
/* Outbound message descriptor allocation */
|
|
priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
|
|
&priv->pdev->dev,
|
|
(entries + 1) * sizeof(struct tsi721_omsg_desc),
|
|
&priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
|
|
if (priv->omsg_ring[mbox].omd_base == NULL) {
|
|
tsi_debug(OMSG, &priv->pdev->dev,
|
|
"ENOMEM for OB_MSG_%d descriptor memory", mbox);
|
|
rc = -ENOMEM;
|
|
goto out_buf;
|
|
}
|
|
|
|
priv->omsg_ring[mbox].tx_slot = 0;
|
|
|
|
/* Outbound message descriptor status FIFO allocation */
|
|
priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
|
|
priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev,
|
|
priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
|
|
&priv->omsg_ring[mbox].sts_phys,
|
|
GFP_KERNEL);
|
|
if (priv->omsg_ring[mbox].sts_base == NULL) {
|
|
tsi_debug(OMSG, &priv->pdev->dev,
|
|
"ENOMEM for OB_MSG_%d status FIFO", mbox);
|
|
rc = -ENOMEM;
|
|
goto out_desc;
|
|
}
|
|
|
|
/*
|
|
* Configure Outbound Messaging Engine
|
|
*/
|
|
|
|
/* Setup Outbound Message descriptor pointer */
|
|
iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
|
|
priv->regs + TSI721_OBDMAC_DPTRH(mbox));
|
|
iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
|
|
TSI721_OBDMAC_DPTRL_MASK),
|
|
priv->regs + TSI721_OBDMAC_DPTRL(mbox));
|
|
|
|
/* Setup Outbound Message descriptor status FIFO */
|
|
iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
|
|
priv->regs + TSI721_OBDMAC_DSBH(mbox));
|
|
iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
|
|
TSI721_OBDMAC_DSBL_MASK),
|
|
priv->regs + TSI721_OBDMAC_DSBL(mbox));
|
|
iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
|
|
priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
|
|
|
|
/* Enable interrupts */
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
if (priv->flags & TSI721_USING_MSIX) {
|
|
int idx = TSI721_VECT_OMB0_DONE + mbox;
|
|
|
|
/* Request interrupt service if we are in MSI-X mode */
|
|
rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
|
|
priv->msix[idx].irq_name, (void *)priv);
|
|
|
|
if (rc) {
|
|
tsi_debug(OMSG, &priv->pdev->dev,
|
|
"Unable to get MSI-X IRQ for OBOX%d-DONE",
|
|
mbox);
|
|
goto out_stat;
|
|
}
|
|
|
|
idx = TSI721_VECT_OMB0_INT + mbox;
|
|
rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
|
|
priv->msix[idx].irq_name, (void *)priv);
|
|
|
|
if (rc) {
|
|
tsi_debug(OMSG, &priv->pdev->dev,
|
|
"Unable to get MSI-X IRQ for MBOX%d-INT", mbox);
|
|
idx = TSI721_VECT_OMB0_DONE + mbox;
|
|
free_irq(priv->msix[idx].vector, (void *)priv);
|
|
goto out_stat;
|
|
}
|
|
}
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
|
|
|
|
/* Initialize Outbound Message descriptors ring */
|
|
bd_ptr = priv->omsg_ring[mbox].omd_base;
|
|
bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
|
|
bd_ptr[entries].msg_info = 0;
|
|
bd_ptr[entries].next_lo =
|
|
cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
|
|
TSI721_OBDMAC_DPTRL_MASK);
|
|
bd_ptr[entries].next_hi =
|
|
cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
|
|
priv->omsg_ring[mbox].wr_count = 0;
|
|
mb();
|
|
|
|
/* Initialize Outbound Message engine */
|
|
iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
|
|
priv->regs + TSI721_OBDMAC_CTL(mbox));
|
|
ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
|
|
udelay(10);
|
|
|
|
priv->omsg_init[mbox] = 1;
|
|
|
|
return 0;
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
out_stat:
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
|
|
priv->omsg_ring[mbox].sts_base,
|
|
priv->omsg_ring[mbox].sts_phys);
|
|
|
|
priv->omsg_ring[mbox].sts_base = NULL;
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
out_desc:
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
(entries + 1) * sizeof(struct tsi721_omsg_desc),
|
|
priv->omsg_ring[mbox].omd_base,
|
|
priv->omsg_ring[mbox].omd_phys);
|
|
|
|
priv->omsg_ring[mbox].omd_base = NULL;
|
|
|
|
out_buf:
|
|
for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
|
|
if (priv->omsg_ring[mbox].omq_base[i]) {
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
TSI721_MSG_BUFFER_SIZE,
|
|
priv->omsg_ring[mbox].omq_base[i],
|
|
priv->omsg_ring[mbox].omq_phys[i]);
|
|
|
|
priv->omsg_ring[mbox].omq_base[i] = NULL;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
|
|
* @mport: Master port implementing the outbound message unit
|
|
* @mbox: Mailbox to close
|
|
*/
|
|
static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
u32 i;
|
|
|
|
if (!priv->omsg_init[mbox])
|
|
return;
|
|
priv->omsg_init[mbox] = 0;
|
|
|
|
/* Disable Interrupts */
|
|
|
|
tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
if (priv->flags & TSI721_USING_MSIX) {
|
|
free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
|
|
(void *)priv);
|
|
free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
|
|
(void *)priv);
|
|
}
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
/* Free OMSG Descriptor Status FIFO */
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
|
|
priv->omsg_ring[mbox].sts_base,
|
|
priv->omsg_ring[mbox].sts_phys);
|
|
|
|
priv->omsg_ring[mbox].sts_base = NULL;
|
|
|
|
/* Free OMSG descriptors */
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
(priv->omsg_ring[mbox].size + 1) *
|
|
sizeof(struct tsi721_omsg_desc),
|
|
priv->omsg_ring[mbox].omd_base,
|
|
priv->omsg_ring[mbox].omd_phys);
|
|
|
|
priv->omsg_ring[mbox].omd_base = NULL;
|
|
|
|
/* Free message buffers */
|
|
for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
|
|
if (priv->omsg_ring[mbox].omq_base[i]) {
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
TSI721_MSG_BUFFER_SIZE,
|
|
priv->omsg_ring[mbox].omq_base[i],
|
|
priv->omsg_ring[mbox].omq_phys[i]);
|
|
|
|
priv->omsg_ring[mbox].omq_base[i] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* tsi721_imsg_handler - Inbound Message Interrupt Handler
|
|
* @priv: pointer to tsi721 private data
|
|
* @ch: inbound message channel number to service
|
|
*
|
|
* Services channel interrupts from inbound messaging engine.
|
|
*/
|
|
static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
|
|
{
|
|
u32 mbox = ch - 4;
|
|
u32 imsg_int;
|
|
struct rio_mport *mport = &priv->mport;
|
|
|
|
spin_lock(&priv->imsg_ring[mbox].lock);
|
|
|
|
imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
|
|
|
|
if (imsg_int & TSI721_IBDMAC_INT_SRTO)
|
|
tsi_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout", mbox);
|
|
|
|
if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
|
|
tsi_info(&priv->pdev->dev, "IB MBOX%d PCIe error", mbox);
|
|
|
|
if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
|
|
tsi_info(&priv->pdev->dev, "IB MBOX%d IB free queue low", mbox);
|
|
|
|
/* Clear IB channel interrupts */
|
|
iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
|
|
|
|
/* If an IB Msg is received notify the upper layer */
|
|
if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
|
|
mport->inb_msg[mbox].mcback)
|
|
mport->inb_msg[mbox].mcback(mport,
|
|
priv->imsg_ring[mbox].dev_id, mbox, -1);
|
|
|
|
if (!(priv->flags & TSI721_USING_MSIX)) {
|
|
u32 ch_inte;
|
|
|
|
/* Re-enable channel interrupts */
|
|
ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
|
|
ch_inte |= TSI721_INT_IMSG_CHAN(ch);
|
|
iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
|
|
}
|
|
|
|
spin_unlock(&priv->imsg_ring[mbox].lock);
|
|
}
|
|
|
|
/**
|
|
* tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
|
|
* @mport: Master port implementing the Inbound Messaging Engine
|
|
* @dev_id: Device specific pointer to pass on event
|
|
* @mbox: Mailbox to open
|
|
* @entries: Number of entries in the inbound mailbox ring
|
|
*/
|
|
static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
|
|
int mbox, int entries)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
int ch = mbox + 4;
|
|
int i;
|
|
u64 *free_ptr;
|
|
int rc = 0;
|
|
|
|
if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
|
|
(entries > TSI721_IMSGD_RING_SIZE) ||
|
|
(!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if ((mbox_sel & (1 << mbox)) == 0) {
|
|
rc = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
/* Initialize IB Messaging Ring */
|
|
priv->imsg_ring[mbox].dev_id = dev_id;
|
|
priv->imsg_ring[mbox].size = entries;
|
|
priv->imsg_ring[mbox].rx_slot = 0;
|
|
priv->imsg_ring[mbox].desc_rdptr = 0;
|
|
priv->imsg_ring[mbox].fq_wrptr = 0;
|
|
for (i = 0; i < priv->imsg_ring[mbox].size; i++)
|
|
priv->imsg_ring[mbox].imq_base[i] = NULL;
|
|
spin_lock_init(&priv->imsg_ring[mbox].lock);
|
|
|
|
/* Allocate buffers for incoming messages */
|
|
priv->imsg_ring[mbox].buf_base =
|
|
dma_alloc_coherent(&priv->pdev->dev,
|
|
entries * TSI721_MSG_BUFFER_SIZE,
|
|
&priv->imsg_ring[mbox].buf_phys,
|
|
GFP_KERNEL);
|
|
|
|
if (priv->imsg_ring[mbox].buf_base == NULL) {
|
|
tsi_err(&priv->pdev->dev,
|
|
"Failed to allocate buffers for IB MBOX%d", mbox);
|
|
rc = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/* Allocate memory for circular free list */
|
|
priv->imsg_ring[mbox].imfq_base =
|
|
dma_alloc_coherent(&priv->pdev->dev,
|
|
entries * 8,
|
|
&priv->imsg_ring[mbox].imfq_phys,
|
|
GFP_KERNEL);
|
|
|
|
if (priv->imsg_ring[mbox].imfq_base == NULL) {
|
|
tsi_err(&priv->pdev->dev,
|
|
"Failed to allocate free queue for IB MBOX%d", mbox);
|
|
rc = -ENOMEM;
|
|
goto out_buf;
|
|
}
|
|
|
|
/* Allocate memory for Inbound message descriptors */
|
|
priv->imsg_ring[mbox].imd_base =
|
|
dma_alloc_coherent(&priv->pdev->dev,
|
|
entries * sizeof(struct tsi721_imsg_desc),
|
|
&priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
|
|
|
|
if (priv->imsg_ring[mbox].imd_base == NULL) {
|
|
tsi_err(&priv->pdev->dev,
|
|
"Failed to allocate descriptor memory for IB MBOX%d",
|
|
mbox);
|
|
rc = -ENOMEM;
|
|
goto out_dma;
|
|
}
|
|
|
|
/* Fill free buffer pointer list */
|
|
free_ptr = priv->imsg_ring[mbox].imfq_base;
|
|
for (i = 0; i < entries; i++)
|
|
free_ptr[i] = cpu_to_le64(
|
|
(u64)(priv->imsg_ring[mbox].buf_phys) +
|
|
i * 0x1000);
|
|
|
|
mb();
|
|
|
|
/*
|
|
* For mapping of inbound SRIO Messages into appropriate queues we need
|
|
* to set Inbound Device ID register in the messaging engine. We do it
|
|
* once when first inbound mailbox is requested.
|
|
*/
|
|
if (!(priv->flags & TSI721_IMSGID_SET)) {
|
|
iowrite32((u32)priv->mport.host_deviceid,
|
|
priv->regs + TSI721_IB_DEVID);
|
|
priv->flags |= TSI721_IMSGID_SET;
|
|
}
|
|
|
|
/*
|
|
* Configure Inbound Messaging channel (ch = mbox + 4)
|
|
*/
|
|
|
|
/* Setup Inbound Message free queue */
|
|
iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
|
|
priv->regs + TSI721_IBDMAC_FQBH(ch));
|
|
iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
|
|
TSI721_IBDMAC_FQBL_MASK),
|
|
priv->regs+TSI721_IBDMAC_FQBL(ch));
|
|
iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
|
|
priv->regs + TSI721_IBDMAC_FQSZ(ch));
|
|
|
|
/* Setup Inbound Message descriptor queue */
|
|
iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
|
|
priv->regs + TSI721_IBDMAC_DQBH(ch));
|
|
iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
|
|
(u32)TSI721_IBDMAC_DQBL_MASK),
|
|
priv->regs+TSI721_IBDMAC_DQBL(ch));
|
|
iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
|
|
priv->regs + TSI721_IBDMAC_DQSZ(ch));
|
|
|
|
/* Enable interrupts */
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
if (priv->flags & TSI721_USING_MSIX) {
|
|
int idx = TSI721_VECT_IMB0_RCV + mbox;
|
|
|
|
/* Request interrupt service if we are in MSI-X mode */
|
|
rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
|
|
priv->msix[idx].irq_name, (void *)priv);
|
|
|
|
if (rc) {
|
|
tsi_debug(IMSG, &priv->pdev->dev,
|
|
"Unable to get MSI-X IRQ for IBOX%d-DONE",
|
|
mbox);
|
|
goto out_desc;
|
|
}
|
|
|
|
idx = TSI721_VECT_IMB0_INT + mbox;
|
|
rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
|
|
priv->msix[idx].irq_name, (void *)priv);
|
|
|
|
if (rc) {
|
|
tsi_debug(IMSG, &priv->pdev->dev,
|
|
"Unable to get MSI-X IRQ for IBOX%d-INT", mbox);
|
|
free_irq(
|
|
priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
|
|
(void *)priv);
|
|
goto out_desc;
|
|
}
|
|
}
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
|
|
|
|
/* Initialize Inbound Message Engine */
|
|
iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
|
|
ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
|
|
udelay(10);
|
|
priv->imsg_ring[mbox].fq_wrptr = entries - 1;
|
|
iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
|
|
|
|
priv->imsg_init[mbox] = 1;
|
|
return 0;
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
out_desc:
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
|
|
priv->imsg_ring[mbox].imd_base,
|
|
priv->imsg_ring[mbox].imd_phys);
|
|
|
|
priv->imsg_ring[mbox].imd_base = NULL;
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
out_dma:
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
priv->imsg_ring[mbox].size * 8,
|
|
priv->imsg_ring[mbox].imfq_base,
|
|
priv->imsg_ring[mbox].imfq_phys);
|
|
|
|
priv->imsg_ring[mbox].imfq_base = NULL;
|
|
|
|
out_buf:
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
|
|
priv->imsg_ring[mbox].buf_base,
|
|
priv->imsg_ring[mbox].buf_phys);
|
|
|
|
priv->imsg_ring[mbox].buf_base = NULL;
|
|
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
|
|
* @mport: Master port implementing the Inbound Messaging Engine
|
|
* @mbox: Mailbox to close
|
|
*/
|
|
static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
u32 rx_slot;
|
|
int ch = mbox + 4;
|
|
|
|
if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
|
|
return;
|
|
priv->imsg_init[mbox] = 0;
|
|
|
|
/* Disable Inbound Messaging Engine */
|
|
|
|
/* Disable Interrupts */
|
|
tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
if (priv->flags & TSI721_USING_MSIX) {
|
|
free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
|
|
(void *)priv);
|
|
free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
|
|
(void *)priv);
|
|
}
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
/* Clear Inbound Buffer Queue */
|
|
for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
|
|
priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
|
|
|
|
/* Free memory allocated for message buffers */
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
|
|
priv->imsg_ring[mbox].buf_base,
|
|
priv->imsg_ring[mbox].buf_phys);
|
|
|
|
priv->imsg_ring[mbox].buf_base = NULL;
|
|
|
|
/* Free memory allocated for free pointr list */
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
priv->imsg_ring[mbox].size * 8,
|
|
priv->imsg_ring[mbox].imfq_base,
|
|
priv->imsg_ring[mbox].imfq_phys);
|
|
|
|
priv->imsg_ring[mbox].imfq_base = NULL;
|
|
|
|
/* Free memory allocated for RX descriptors */
|
|
dma_free_coherent(&priv->pdev->dev,
|
|
priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
|
|
priv->imsg_ring[mbox].imd_base,
|
|
priv->imsg_ring[mbox].imd_phys);
|
|
|
|
priv->imsg_ring[mbox].imd_base = NULL;
|
|
}
|
|
|
|
/**
|
|
* tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
|
|
* @mport: Master port implementing the Inbound Messaging Engine
|
|
* @mbox: Inbound mailbox number
|
|
* @buf: Buffer to add to inbound queue
|
|
*/
|
|
static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
u32 rx_slot;
|
|
int rc = 0;
|
|
|
|
rx_slot = priv->imsg_ring[mbox].rx_slot;
|
|
if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
|
|
tsi_err(&priv->pdev->dev,
|
|
"Error adding inbound buffer %d, buffer exists",
|
|
rx_slot);
|
|
rc = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
|
|
|
|
if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
|
|
priv->imsg_ring[mbox].rx_slot = 0;
|
|
|
|
out:
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
|
|
* @mport: Master port implementing the Inbound Messaging Engine
|
|
* @mbox: Inbound mailbox number
|
|
*
|
|
* Returns pointer to the message on success or NULL on failure.
|
|
*/
|
|
static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
struct tsi721_imsg_desc *desc;
|
|
u32 rx_slot;
|
|
void *rx_virt = NULL;
|
|
u64 rx_phys;
|
|
void *buf = NULL;
|
|
u64 *free_ptr;
|
|
int ch = mbox + 4;
|
|
int msg_size;
|
|
|
|
if (!priv->imsg_init[mbox])
|
|
return NULL;
|
|
|
|
desc = priv->imsg_ring[mbox].imd_base;
|
|
desc += priv->imsg_ring[mbox].desc_rdptr;
|
|
|
|
if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
|
|
goto out;
|
|
|
|
rx_slot = priv->imsg_ring[mbox].rx_slot;
|
|
while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
|
|
if (++rx_slot == priv->imsg_ring[mbox].size)
|
|
rx_slot = 0;
|
|
}
|
|
|
|
rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
|
|
le32_to_cpu(desc->bufptr_lo);
|
|
|
|
rx_virt = priv->imsg_ring[mbox].buf_base +
|
|
(rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
|
|
|
|
buf = priv->imsg_ring[mbox].imq_base[rx_slot];
|
|
msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
|
|
if (msg_size == 0)
|
|
msg_size = RIO_MAX_MSG_SIZE;
|
|
|
|
memcpy(buf, rx_virt, msg_size);
|
|
priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
|
|
|
|
desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
|
|
if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
|
|
priv->imsg_ring[mbox].desc_rdptr = 0;
|
|
|
|
iowrite32(priv->imsg_ring[mbox].desc_rdptr,
|
|
priv->regs + TSI721_IBDMAC_DQRP(ch));
|
|
|
|
/* Return free buffer into the pointer list */
|
|
free_ptr = priv->imsg_ring[mbox].imfq_base;
|
|
free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
|
|
|
|
if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
|
|
priv->imsg_ring[mbox].fq_wrptr = 0;
|
|
|
|
iowrite32(priv->imsg_ring[mbox].fq_wrptr,
|
|
priv->regs + TSI721_IBDMAC_FQWP(ch));
|
|
out:
|
|
return buf;
|
|
}
|
|
|
|
/**
|
|
* tsi721_messages_init - Initialization of Messaging Engine
|
|
* @priv: pointer to tsi721 private data
|
|
*
|
|
* Configures Tsi721 messaging engine.
|
|
*/
|
|
static int tsi721_messages_init(struct tsi721_device *priv)
|
|
{
|
|
int ch;
|
|
|
|
iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
|
|
iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
|
|
iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
|
|
|
|
/* Set SRIO Message Request/Response Timeout */
|
|
iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
|
|
|
|
/* Initialize Inbound Messaging Engine Registers */
|
|
for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
|
|
/* Clear interrupt bits */
|
|
iowrite32(TSI721_IBDMAC_INT_MASK,
|
|
priv->regs + TSI721_IBDMAC_INT(ch));
|
|
/* Clear Status */
|
|
iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
|
|
|
|
iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
|
|
priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
|
|
iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
|
|
priv->regs + TSI721_SMSG_ECC_NCOR(ch));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tsi721_query_mport - Fetch inbound message from the Tsi721 MSG Queue
|
|
* @mport: Master port implementing the Inbound Messaging Engine
|
|
* @mbox: Inbound mailbox number
|
|
*
|
|
* Returns pointer to the message on success or NULL on failure.
|
|
*/
|
|
static int tsi721_query_mport(struct rio_mport *mport,
|
|
struct rio_mport_attr *attr)
|
|
{
|
|
struct tsi721_device *priv = mport->priv;
|
|
u32 rval;
|
|
|
|
rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0));
|
|
if (rval & RIO_PORT_N_ERR_STS_PORT_OK) {
|
|
rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0));
|
|
attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28;
|
|
rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0));
|
|
attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27;
|
|
} else
|
|
attr->link_speed = RIO_LINK_DOWN;
|
|
|
|
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
|
|
attr->flags = RIO_MPORT_DMA | RIO_MPORT_DMA_SG;
|
|
attr->dma_max_sge = 0;
|
|
attr->dma_max_size = TSI721_BDMA_MAX_BCOUNT;
|
|
attr->dma_align = 0;
|
|
#else
|
|
attr->flags = 0;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tsi721_disable_ints - disables all device interrupts
|
|
* @priv: pointer to tsi721 private data
|
|
*/
|
|
static void tsi721_disable_ints(struct tsi721_device *priv)
|
|
{
|
|
int ch;
|
|
|
|
/* Disable all device level interrupts */
|
|
iowrite32(0, priv->regs + TSI721_DEV_INTE);
|
|
|
|
/* Disable all Device Channel interrupts */
|
|
iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
|
|
|
|
/* Disable all Inbound Msg Channel interrupts */
|
|
for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
|
|
iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
|
|
|
|
/* Disable all Outbound Msg Channel interrupts */
|
|
for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
|
|
iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
|
|
|
|
/* Disable all general messaging interrupts */
|
|
iowrite32(0, priv->regs + TSI721_SMSG_INTE);
|
|
|
|
/* Disable all BDMA Channel interrupts */
|
|
for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
|
|
iowrite32(0,
|
|
priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE);
|
|
|
|
/* Disable all general BDMA interrupts */
|
|
iowrite32(0, priv->regs + TSI721_BDMA_INTE);
|
|
|
|
/* Disable all SRIO Channel interrupts */
|
|
for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
|
|
iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
|
|
|
|
/* Disable all general SR2PC interrupts */
|
|
iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
|
|
|
|
/* Disable all PC2SR interrupts */
|
|
iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
|
|
|
|
/* Disable all I2C interrupts */
|
|
iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
|
|
|
|
/* Disable SRIO MAC interrupts */
|
|
iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
|
|
iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
|
|
}
|
|
|
|
static struct rio_ops tsi721_rio_ops = {
|
|
.lcread = tsi721_lcread,
|
|
.lcwrite = tsi721_lcwrite,
|
|
.cread = tsi721_cread_dma,
|
|
.cwrite = tsi721_cwrite_dma,
|
|
.dsend = tsi721_dsend,
|
|
.open_inb_mbox = tsi721_open_inb_mbox,
|
|
.close_inb_mbox = tsi721_close_inb_mbox,
|
|
.open_outb_mbox = tsi721_open_outb_mbox,
|
|
.close_outb_mbox = tsi721_close_outb_mbox,
|
|
.add_outb_message = tsi721_add_outb_message,
|
|
.add_inb_buffer = tsi721_add_inb_buffer,
|
|
.get_inb_message = tsi721_get_inb_message,
|
|
.map_inb = tsi721_rio_map_inb_mem,
|
|
.unmap_inb = tsi721_rio_unmap_inb_mem,
|
|
.pwenable = tsi721_pw_enable,
|
|
.query_mport = tsi721_query_mport,
|
|
.map_outb = tsi721_map_outb_win,
|
|
.unmap_outb = tsi721_unmap_outb_win,
|
|
};
|
|
|
|
static void tsi721_mport_release(struct device *dev)
|
|
{
|
|
struct rio_mport *mport = to_rio_mport(dev);
|
|
|
|
tsi_debug(EXIT, dev, "%s id=%d", mport->name, mport->id);
|
|
}
|
|
|
|
/**
|
|
* tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
|
|
* @priv: pointer to tsi721 private data
|
|
*
|
|
* Configures Tsi721 as RapidIO master port.
|
|
*/
|
|
static int tsi721_setup_mport(struct tsi721_device *priv)
|
|
{
|
|
struct pci_dev *pdev = priv->pdev;
|
|
int err = 0;
|
|
struct rio_mport *mport = &priv->mport;
|
|
|
|
err = rio_mport_initialize(mport);
|
|
if (err)
|
|
return err;
|
|
|
|
mport->ops = &tsi721_rio_ops;
|
|
mport->index = 0;
|
|
mport->sys_size = 0; /* small system */
|
|
mport->priv = (void *)priv;
|
|
mport->phys_efptr = 0x100;
|
|
mport->phys_rmap = 1;
|
|
mport->dev.parent = &pdev->dev;
|
|
mport->dev.release = tsi721_mport_release;
|
|
|
|
INIT_LIST_HEAD(&mport->dbells);
|
|
|
|
rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
|
|
rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3);
|
|
rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3);
|
|
snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)",
|
|
dev_driver_string(&pdev->dev), dev_name(&pdev->dev));
|
|
|
|
/* Hook up interrupt handler */
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
if (!tsi721_enable_msix(priv))
|
|
priv->flags |= TSI721_USING_MSIX;
|
|
else if (!pci_enable_msi(pdev))
|
|
priv->flags |= TSI721_USING_MSI;
|
|
else
|
|
tsi_debug(MPORT, &pdev->dev,
|
|
"MSI/MSI-X is not available. Using legacy INTx.");
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
err = tsi721_request_irq(priv);
|
|
|
|
if (err) {
|
|
tsi_err(&pdev->dev, "Unable to get PCI IRQ %02X (err=0x%x)",
|
|
pdev->irq, err);
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
|
|
err = tsi721_register_dma(priv);
|
|
if (err)
|
|
goto err_exit;
|
|
#endif
|
|
/* Enable SRIO link */
|
|
iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
|
|
TSI721_DEVCTL_SRBOOT_CMPL,
|
|
priv->regs + TSI721_DEVCTL);
|
|
|
|
if (mport->host_deviceid >= 0)
|
|
iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
|
|
RIO_PORT_GEN_DISCOVERED,
|
|
priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
|
|
else
|
|
iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
|
|
|
|
err = rio_register_mport(mport);
|
|
if (err) {
|
|
tsi721_unregister_dma(priv);
|
|
goto err_exit;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_exit:
|
|
tsi721_free_irq(priv);
|
|
return err;
|
|
}
|
|
|
|
static int tsi721_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct tsi721_device *priv;
|
|
int err;
|
|
|
|
priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
|
|
if (!priv) {
|
|
err = -ENOMEM;
|
|
goto err_exit;
|
|
}
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
tsi_err(&pdev->dev, "Failed to enable PCI device");
|
|
goto err_clean;
|
|
}
|
|
|
|
priv->pdev = pdev;
|
|
|
|
#ifdef DEBUG
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
|
|
tsi_debug(INIT, &pdev->dev, "res%d %pR",
|
|
i, &pdev->resource[i]);
|
|
}
|
|
}
|
|
#endif
|
|
/*
|
|
* Verify BAR configuration
|
|
*/
|
|
|
|
/* BAR_0 (registers) must be 512KB+ in 32-bit address space */
|
|
if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
|
|
pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
|
|
pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
|
|
tsi_err(&pdev->dev, "Missing or misconfigured CSR BAR0");
|
|
err = -ENODEV;
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
/* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
|
|
if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
|
|
pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
|
|
pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
|
|
tsi_err(&pdev->dev, "Missing or misconfigured Doorbell BAR1");
|
|
err = -ENODEV;
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
/*
|
|
* BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
|
|
* space.
|
|
* NOTE: BAR_2 and BAR_4 are not used by this version of driver.
|
|
* It may be a good idea to keep them disabled using HW configuration
|
|
* to save PCI memory space.
|
|
*/
|
|
|
|
priv->p2r_bar[0].size = priv->p2r_bar[1].size = 0;
|
|
|
|
if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64) {
|
|
if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_PREFETCH)
|
|
tsi_debug(INIT, &pdev->dev,
|
|
"Prefetchable OBW BAR2 will not be used");
|
|
else {
|
|
priv->p2r_bar[0].base = pci_resource_start(pdev, BAR_2);
|
|
priv->p2r_bar[0].size = pci_resource_len(pdev, BAR_2);
|
|
}
|
|
}
|
|
|
|
if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64) {
|
|
if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_PREFETCH)
|
|
tsi_debug(INIT, &pdev->dev,
|
|
"Prefetchable OBW BAR4 will not be used");
|
|
else {
|
|
priv->p2r_bar[1].base = pci_resource_start(pdev, BAR_4);
|
|
priv->p2r_bar[1].size = pci_resource_len(pdev, BAR_4);
|
|
}
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_NAME);
|
|
if (err) {
|
|
tsi_err(&pdev->dev, "Unable to obtain PCI resources");
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
priv->regs = pci_ioremap_bar(pdev, BAR_0);
|
|
if (!priv->regs) {
|
|
tsi_err(&pdev->dev, "Unable to map device registers space");
|
|
err = -ENOMEM;
|
|
goto err_free_res;
|
|
}
|
|
|
|
priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
|
|
if (!priv->odb_base) {
|
|
tsi_err(&pdev->dev, "Unable to map outbound doorbells space");
|
|
err = -ENOMEM;
|
|
goto err_unmap_bars;
|
|
}
|
|
|
|
/* Configure DMA attributes. */
|
|
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
tsi_err(&pdev->dev, "Unable to set DMA mask");
|
|
goto err_unmap_bars;
|
|
}
|
|
|
|
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
|
|
tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
|
|
} else {
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
|
|
if (err)
|
|
tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
|
|
}
|
|
|
|
BUG_ON(!pci_is_pcie(pdev));
|
|
|
|
/* Clear "no snoop" and "relaxed ordering" bits. */
|
|
pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
|
|
PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN, 0);
|
|
|
|
/* Override PCIe Maximum Read Request Size setting if requested */
|
|
if (pcie_mrrs >= 0) {
|
|
if (pcie_mrrs <= 5)
|
|
pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
|
|
PCI_EXP_DEVCTL_READRQ, pcie_mrrs << 12);
|
|
else
|
|
tsi_info(&pdev->dev,
|
|
"Invalid MRRS override value %d", pcie_mrrs);
|
|
}
|
|
|
|
/* Set PCIe completion timeout to 1-10ms */
|
|
pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2,
|
|
PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0x2);
|
|
|
|
/*
|
|
* FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
|
|
*/
|
|
pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
|
|
pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
|
|
TSI721_MSIXTBL_OFFSET);
|
|
pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
|
|
TSI721_MSIXPBA_OFFSET);
|
|
pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
|
|
/* End of FIXUP */
|
|
|
|
tsi721_disable_ints(priv);
|
|
|
|
tsi721_init_pc2sr_mapping(priv);
|
|
tsi721_init_sr2pc_mapping(priv);
|
|
|
|
if (tsi721_bdma_maint_init(priv)) {
|
|
tsi_err(&pdev->dev, "BDMA initialization failed");
|
|
err = -ENOMEM;
|
|
goto err_unmap_bars;
|
|
}
|
|
|
|
err = tsi721_doorbell_init(priv);
|
|
if (err)
|
|
goto err_free_bdma;
|
|
|
|
tsi721_port_write_init(priv);
|
|
|
|
err = tsi721_messages_init(priv);
|
|
if (err)
|
|
goto err_free_consistent;
|
|
|
|
err = tsi721_setup_mport(priv);
|
|
if (err)
|
|
goto err_free_consistent;
|
|
|
|
pci_set_drvdata(pdev, priv);
|
|
tsi721_interrupts_init(priv);
|
|
|
|
return 0;
|
|
|
|
err_free_consistent:
|
|
tsi721_port_write_free(priv);
|
|
tsi721_doorbell_free(priv);
|
|
err_free_bdma:
|
|
tsi721_bdma_maint_free(priv);
|
|
err_unmap_bars:
|
|
if (priv->regs)
|
|
iounmap(priv->regs);
|
|
if (priv->odb_base)
|
|
iounmap(priv->odb_base);
|
|
err_free_res:
|
|
pci_release_regions(pdev);
|
|
pci_clear_master(pdev);
|
|
err_disable_pdev:
|
|
pci_disable_device(pdev);
|
|
err_clean:
|
|
kfree(priv);
|
|
err_exit:
|
|
return err;
|
|
}
|
|
|
|
static void tsi721_remove(struct pci_dev *pdev)
|
|
{
|
|
struct tsi721_device *priv = pci_get_drvdata(pdev);
|
|
|
|
tsi_debug(EXIT, &pdev->dev, "enter");
|
|
|
|
tsi721_disable_ints(priv);
|
|
tsi721_free_irq(priv);
|
|
flush_scheduled_work();
|
|
rio_unregister_mport(&priv->mport);
|
|
|
|
tsi721_unregister_dma(priv);
|
|
tsi721_bdma_maint_free(priv);
|
|
tsi721_doorbell_free(priv);
|
|
tsi721_port_write_free(priv);
|
|
tsi721_close_sr2pc_mapping(priv);
|
|
|
|
if (priv->regs)
|
|
iounmap(priv->regs);
|
|
if (priv->odb_base)
|
|
iounmap(priv->odb_base);
|
|
#ifdef CONFIG_PCI_MSI
|
|
if (priv->flags & TSI721_USING_MSIX)
|
|
pci_disable_msix(priv->pdev);
|
|
else if (priv->flags & TSI721_USING_MSI)
|
|
pci_disable_msi(priv->pdev);
|
|
#endif
|
|
pci_release_regions(pdev);
|
|
pci_clear_master(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
kfree(priv);
|
|
tsi_debug(EXIT, &pdev->dev, "exit");
|
|
}
|
|
|
|
static void tsi721_shutdown(struct pci_dev *pdev)
|
|
{
|
|
struct tsi721_device *priv = pci_get_drvdata(pdev);
|
|
|
|
tsi_debug(EXIT, &pdev->dev, "enter");
|
|
|
|
tsi721_disable_ints(priv);
|
|
tsi721_dma_stop_all(priv);
|
|
pci_clear_master(pdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static const struct pci_device_id tsi721_pci_tbl[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
|
|
{ 0, } /* terminate list */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
|
|
|
|
static struct pci_driver tsi721_driver = {
|
|
.name = "tsi721",
|
|
.id_table = tsi721_pci_tbl,
|
|
.probe = tsi721_probe,
|
|
.remove = tsi721_remove,
|
|
.shutdown = tsi721_shutdown,
|
|
};
|
|
|
|
module_pci_driver(tsi721_driver);
|
|
|
|
MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver");
|
|
MODULE_AUTHOR("Integrated Device Technology, Inc.");
|
|
MODULE_LICENSE("GPL");
|