lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a15a519ed6
android_kernel_xiaomi_sm8350/drivers/serial
History
Michael Buesch c4285b47b0 parport/serial: add support for NetMos 9901 Multi-IO card 
Add support for the PCI-Express NetMos 9901 Multi-IO card.

0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550])
        Subsystem: Device [a000:1000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 65
        Region 0: I/O ports at 0030 [size=8]
        Region 1: Memory at 80105000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80104000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial
        Kernel modules: 8250_pci

0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550])
        Subsystem: Device [a000:1000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 65
        Region 0: I/O ports at 0020 [size=8]
        Region 1: Memory at 80103000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial
        Kernel modules: 8250_pci

0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284])
        Subsystem: Device [a000:2000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 65
        Region 0: I/O ports at 0010 [size=8]
        Region 1: I/O ports at <unassigned>
        Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
        Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: parport_pc
        Kernel modules: parport_pc

[   16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65
[   16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP]
[   16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007)
[   16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2
[   16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007)
[   16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:55:59 -07:00
..
cpm_uart cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console. 2009-04-06 09:09:33 -05:00
jsm jsm: clean up "serial: jsm: correctly support 4 8 port boards" 2009-06-24 09:55:50 -07:00
8250_accent.c
8250_acorn.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c serial: 8250_gsc: fix printk format error 2009-05-29 08:40:02 -07:00
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c parport/serial: add support for NetMos 9901 Multi-IO card 2009-06-30 18:55:59 -07:00
8250_pnp.c serial: Update PNP IDs 2009-04-06 14:36:26 -07:00
8250.c serial: add support for the TI AR7 internal UART 2009-06-11 08:51:03 -07:00
8250.h
21285.c [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h 2009-03-25 10:21:35 +00:00
68328serial.c
68328serial.h
68360serial.c
amba-pl010.c [ARM] 5544/1: Trust PrimeCell resource sizes 2009-06-11 15:36:56 +01:00
amba-pl011.c [ARM] 5544/1: Trust PrimeCell resource sizes 2009-06-11 15:36:56 +01:00
atmel_serial.c atmel_serial: fix hang in set_termios when crtscts is enabled 2009-06-16 12:01:16 -07:00
bfin_5xx.c serial: bfin_5xx: fix building as module when early printk is enabled 2009-06-22 11:32:23 -07:00
bfin_sport_uart.c Blackfin SPORT UART: rewrite inline assembly 2009-06-11 08:51:04 -07:00
bfin_sport_uart.h
clps711x.c [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h 2009-03-25 10:21:35 +00:00
crisv10.c CRISv10: fix serial driver proc-usage 2009-05-02 15:36:09 -07:00
crisv10.h tty: Use the generic RS485 ioctl on CRIS 2009-04-07 08:44:05 -07:00
dz.c
dz.h
icom.c pci: use pci_ioremap_bar() in drivers/serial 2009-06-24 09:55:50 -07:00
icom.h
imx.c imx: Check for NULL pointer deref before calling tty_encode_baud_rate 2009-06-16 12:01:17 -07:00
ioc3_serial.c [IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submodule 2008-12-09 10:08:51 -08:00
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig msm_serial: serial driver for MSM7K onboard serial peripheral. 2009-06-22 11:32:25 -07:00
kgdboc.c
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile msm_serial: serial driver for MSM7K onboard serial peripheral. 2009-06-22 11:32:25 -07:00
max3100.c tty: MAX3100 2009-04-08 14:33:38 -07:00
mcf.c m68knommu: Fix support for console port other than ttyS0 on mcf.c 2009-03-24 15:17:43 +10:00
mpc52xx_uart.c powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function 2009-06-17 00:30:22 -06:00
mpsc.c
msm_serial.c msm: fixups to match current code 2009-06-22 11:32:25 -07:00
msm_serial.h msm_serial: serial driver for MSM7K onboard serial peripheral. 2009-06-22 11:32:25 -07:00
mux.c
netx-serial.c
nwpserial.c serial/nwpserial: Fix wrong register read address and add interrupt acknowledge. 2009-05-15 16:43:42 +10:00
of_serial.c Merge commit 'origin/master' into next 2009-06-18 11:16:55 +10:00
pmac_zilog.c powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook 2009-04-07 15:07:43 +10:00
pmac_zilog.h
pnx8xxx_uart.c When a break signal is detected, the next character should be ignored. 2009-01-15 12:48:36 -08:00
pxa.c [ARM] pxa: remove machine class specific stuffs from serial driver 2009-03-09 21:22:38 +08:00
s3c24a0.c serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
s3c2400.c serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
s3c2410.c serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
s3c2412.c serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
s3c2440.c serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
s3c6400.c serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
sa1100.c [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h 2009-03-25 10:21:35 +00:00
samsung.c serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
samsung.h serial: samsung.c: mark s3c24xx_serial_remove as __devexit 2009-06-22 11:32:24 -07:00
sb1250-duart.c serial: fix off by one errors 2009-06-22 11:32:23 -07:00
sc26xx.c
serial_core.c serial: fixup /proc/tty/driver/serial after proc_fops conversion 2009-04-01 14:50:48 -07:00
serial_cs.c 3c589_cs: add cis(firmware) of 3Com multifunction pcmcia card 2009-05-01 19:21:26 -07:00
serial_ks8695.c
serial_lh7a40x.c [ARM] lh7a40x: avoid polluting the kernel's namespace 2008-11-28 16:39:04 +00:00
serial_txx9.c kgdb: kgdboc console poll hooks for serial_txx9 uart 2009-06-24 09:55:50 -07:00
sh-sci.c serial: sh-sci: Move over to dev_pm_ops. 2009-06-15 07:07:38 +09:00
sh-sci.h sh: Fix up the sh64 earlyprintk build. 2009-05-09 14:31:37 +09:00
sn_console.c
suncore.c
suncore.h
sunhv.c serial: fix off by one errors 2009-06-22 11:32:23 -07:00
sunsab.c
sunsab.h
sunsu.c serial: sunsu: sunsu_kbd_ms_init needs to be __devinit 2009-04-08 03:29:03 -07:00
sunzilog.c serial: struct device - replace bus_id with dev_name(), dev_set_name() 2009-03-24 16:38:21 -07:00
sunzilog.h
timbuart.c timbuart: Fix for tx_empty 2009-06-22 11:32:25 -07:00
timbuart.h serial: Added Timberdale UART driver 2009-06-11 08:51:06 -07:00
uartlite.c powerpc/virtex: fix various format/casting printk mismatches 2008-11-14 09:59:48 -07:00
ucc_uart.c serial: Make ucc_uart work in HW UART mode 2009-06-15 21:45:31 -05:00
vr41xx_siu.c
zs.c serial: fix off by one errors 2009-06-22 11:32:23 -07:00
zs.h