android_kernel_xiaomi_sm8350/include/asm-powerpc/prom.h
Scott Wood 804ace8881 [POWERPC] Use strcasecmp() rather than strncasecmp() when determining device node compatibility
The current code assumes "foo-bar" must always be compatible with a node
compatible with "foo", which breaks device trees where this is not so.

The "case" part is also wrong according to Open Firmware, but it's more
likely to have drivers and/or device trees depending on it, and thus
needs to be handled more carefully.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00

337 lines
11 KiB
C

#ifndef _POWERPC_PROM_H
#define _POWERPC_PROM_H
#ifdef __KERNEL__
/*
* Definitions for talking to the Open Firmware PROM on
* Power Macintosh computers.
*
* Copyright (C) 1996-2005 Paul Mackerras.
*
* Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/platform_device.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2))
#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
/* Definitions used by the flattened device tree */
#define OF_DT_HEADER 0xd00dfeed /* marker */
#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */
#define OF_DT_END_NODE 0x2 /* End node */
#define OF_DT_PROP 0x3 /* Property: name off, size,
* content */
#define OF_DT_NOP 0x4 /* nop */
#define OF_DT_END 0x9
#define OF_DT_VERSION 0x10
/*
* This is what gets passed to the kernel by prom_init or kexec
*
* The dt struct contains the device tree structure, full pathes and
* property contents. The dt strings contain a separate block with just
* the strings for the property names, and is fully page aligned and
* self contained in a page, so that it can be kept around by the kernel,
* each property name appears only once in this page (cheap compression)
*
* the mem_rsvmap contains a map of reserved ranges of physical memory,
* passing it here instead of in the device-tree itself greatly simplifies
* the job of everybody. It's just a list of u64 pairs (base/size) that
* ends when size is 0
*/
struct boot_param_header
{
u32 magic; /* magic word OF_DT_HEADER */
u32 totalsize; /* total size of DT block */
u32 off_dt_struct; /* offset to structure */
u32 off_dt_strings; /* offset to strings */
u32 off_mem_rsvmap; /* offset to memory reserve map */
u32 version; /* format version */
u32 last_comp_version; /* last compatible version */
/* version 2 fields below */
u32 boot_cpuid_phys; /* Physical CPU id we're booting on */
/* version 3 fields below */
u32 dt_strings_size; /* size of the DT strings block */
/* version 17 fields below */
u32 dt_struct_size; /* size of the DT structure block */
};
typedef u32 phandle;
typedef u32 ihandle;
struct property {
char *name;
int length;
void *value;
struct property *next;
};
struct device_node {
const char *name;
const char *type;
phandle node;
phandle linux_phandle;
char *full_name;
struct property *properties;
struct property *deadprops; /* removed properties */
struct device_node *parent;
struct device_node *child;
struct device_node *sibling;
struct device_node *next; /* next device of same type */
struct device_node *allnext; /* next in list of all nodes */
struct proc_dir_entry *pde; /* this node's proc directory */
struct kref kref;
unsigned long _flags;
void *data;
};
extern struct device_node *of_chosen;
static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
{
return test_bit(flag, &n->_flags);
}
static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
{
set_bit(flag, &n->_flags);
}
#define HAVE_ARCH_DEVTREE_FIXUPS
static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
{
dn->pde = de;
}
extern struct device_node *of_find_all_nodes(struct device_node *prev);
extern struct device_node *of_node_get(struct device_node *node);
extern void of_node_put(struct device_node *node);
/* For scanning the flat device-tree at boot time */
extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
const char *uname, int depth,
void *data),
void *data);
extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
unsigned long *size);
extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
extern unsigned long __init of_get_flat_dt_root(void);
/* For updating the device tree at runtime */
extern void of_attach_node(struct device_node *);
extern void of_detach_node(struct device_node *);
/* Other Prototypes */
extern void finish_device_tree(void);
extern void unflatten_device_tree(void);
extern void early_init_devtree(void *);
extern int machine_is_compatible(const char *compat);
extern void print_properties(struct device_node *node);
extern int prom_n_intr_cells(struct device_node* np);
extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
extern int prom_add_property(struct device_node* np, struct property* prop);
extern int prom_remove_property(struct device_node *np, struct property *prop);
extern int prom_update_property(struct device_node *np,
struct property *newprop,
struct property *oldprop);
#ifdef CONFIG_PPC32
/*
* PCI <-> OF matching functions
* (XXX should these be here?)
*/
struct pci_bus;
struct pci_dev;
extern int pci_device_from_OF_node(struct device_node *node,
u8* bus, u8* devfn);
extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
extern void pci_create_OF_bus_map(void);
#endif
extern struct resource *request_OF_resource(struct device_node* node,
int index, const char* name_postfix);
extern int release_OF_resource(struct device_node* node, int index);
/*
* OF address retreival & translation
*/
/* Helper to read a big number; size is in cells (not bytes) */
static inline u64 of_read_number(const u32 *cell, int size)
{
u64 r = 0;
while (size--)
r = (r << 32) | *(cell++);
return r;
}
/* Like of_read_number, but we want an unsigned long result */
#ifdef CONFIG_PPC32
static inline unsigned long of_read_ulong(const u32 *cell, int size)
{
return cell[size-1];
}
#else
#define of_read_ulong(cell, size) of_read_number(cell, size)
#endif
/* Translate an OF address block into a CPU physical address
*/
extern u64 of_translate_address(struct device_node *np, const u32 *addr);
/* Extract an address from a device, returns the region size and
* the address space flags too. The PCI version uses a BAR number
* instead of an absolute index
*/
extern const u32 *of_get_address(struct device_node *dev, int index,
u64 *size, unsigned int *flags);
extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
u64 *size, unsigned int *flags);
/* Get an address as a resource. Note that if your address is
* a PIO address, the conversion will fail if the physical address
* can't be internally converted to an IO token with
* pci_address_to_pio(), that is because it's either called to early
* or it can't be matched to any host bridge IO space
*/
extern int of_address_to_resource(struct device_node *dev, int index,
struct resource *r);
extern int of_pci_address_to_resource(struct device_node *dev, int bar,
struct resource *r);
/* Parse the ibm,dma-window property of an OF node into the busno, phys and
* size parameters.
*/
void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size);
extern void kdump_move_device_tree(void);
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
/* Get the MAC address */
extern const void *of_get_mac_address(struct device_node *np);
/*
* OF interrupt mapping
*/
/* This structure is returned when an interrupt is mapped. The controller
* field needs to be put() after use
*/
#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
struct of_irq {
struct device_node *controller; /* Interrupt controller node */
u32 size; /* Specifier size */
u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
};
/**
* of_irq_map_init - Initialize the irq remapper
* @flags: flags defining workarounds to enable
*
* Some machines have bugs in the device-tree which require certain workarounds
* to be applied. Call this before any interrupt mapping attempts to enable
* those workarounds.
*/
#define OF_IMAP_OLDWORLD_MAC 0x00000001
#define OF_IMAP_NO_PHANDLE 0x00000002
extern void of_irq_map_init(unsigned int flags);
/**
* of_irq_map_raw - Low level interrupt tree parsing
* @parent: the device interrupt parent
* @intspec: interrupt specifier ("interrupts" property of the device)
* @ointsize: size of the passed in interrupt specifier
* @addr: address specifier (start of "reg" property of the device)
* @out_irq: structure of_irq filled by this function
*
* Returns 0 on success and a negative number on error
*
* This function is a low-level interrupt tree walking function. It
* can be used to do a partial walk with synthetized reg and interrupts
* properties, for example when resolving PCI interrupts when no device
* node exist for the parent.
*
*/
extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
u32 ointsize, const u32 *addr,
struct of_irq *out_irq);
/**
* of_irq_map_one - Resolve an interrupt for a device
* @device: the device whose interrupt is to be resolved
* @index: index of the interrupt to resolve
* @out_irq: structure of_irq filled by this function
*
* This function resolves an interrupt, walking the tree, for a given
* device-tree node. It's the high level pendant to of_irq_map_raw().
* It also implements the workarounds for OldWolrd Macs.
*/
extern int of_irq_map_one(struct device_node *device, int index,
struct of_irq *out_irq);
/**
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
*
* This function resolves the PCI interrupt for a given PCI device. If a
* device-node exists for a given pci_dev, it will use normal OF tree
* walking. If not, it will implement standard swizzling and walk up the
* PCI tree until an device-node is found, at which point it will finish
* resolving using the OF tree walking.
*/
struct pci_dev;
extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
extern int of_irq_to_resource(struct device_node *dev, int index,
struct resource *r);
/**
* of_iomap - Maps the memory mapped IO for a given device_node
* @device: the device whose io range will be mapped
* @index: index of the io range
*
* Returns a pointer to the mapped memory
*/
extern void __iomem *of_iomap(struct device_node *device, int index);
/*
* NB: This is here while we transition from using asm/prom.h
* to linux/of.h
*/
#include <linux/of.h>
#endif /* __KERNEL__ */
#endif /* _POWERPC_PROM_H */