android_kernel_xiaomi_sm8350/arch/alpha/kernel/sys_takara.c
Ingo Molnar d1bef4ed5f [PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.

While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.

The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.

This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.

As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.

The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.

We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.

This patch:

rename desc->handler to desc->chip.

Originally i did not want to do this, because it's a big patch.  But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.

I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.

So lets get over with this quickly.  The conversion was done automatically
via scripts and converts all the code in the kernel.

This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.

[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00

297 lines
8.0 KiB
C

/*
* linux/arch/alpha/kernel/sys_takara.c
*
* Copyright (C) 1995 David A Rusling
* Copyright (C) 1996 Jay A Estabrook
* Copyright (C) 1998, 1999 Richard Henderson
*
* Code supporting the TAKARA.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
/* Note mask bit is true for DISABLED irqs. */
static unsigned long cached_irq_mask[2] = { -1, -1 };
static inline void
takara_update_irq_hw(unsigned long irq, unsigned long mask)
{
int regaddr;
mask = (irq >= 64 ? mask << 16 : mask >> ((irq - 16) & 0x30));
regaddr = 0x510 + (((irq - 16) >> 2) & 0x0c);
outl(mask & 0xffff0000UL, regaddr);
}
static inline void
takara_enable_irq(unsigned int irq)
{
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
takara_update_irq_hw(irq, mask);
}
static void
takara_disable_irq(unsigned int irq)
{
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
takara_update_irq_hw(irq, mask);
}
static unsigned int
takara_startup_irq(unsigned int irq)
{
takara_enable_irq(irq);
return 0; /* never anything pending */
}
static void
takara_end_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
takara_enable_irq(irq);
}
static struct hw_interrupt_type takara_irq_type = {
.typename = "TAKARA",
.startup = takara_startup_irq,
.shutdown = takara_disable_irq,
.enable = takara_enable_irq,
.disable = takara_disable_irq,
.ack = takara_disable_irq,
.end = takara_end_irq,
};
static void
takara_device_interrupt(unsigned long vector, struct pt_regs *regs)
{
unsigned intstatus;
/*
* The PALcode will have passed us vectors 0x800 or 0x810,
* which are fairly arbitrary values and serve only to tell
* us whether an interrupt has come in on IRQ0 or IRQ1. If
* it's IRQ1 it's a PCI interrupt; if it's IRQ0, it's
* probably ISA, but PCI interrupts can come through IRQ0
* as well if the interrupt controller isn't in accelerated
* mode.
*
* OTOH, the accelerator thing doesn't seem to be working
* overly well, so what we'll do instead is try directly
* examining the Master Interrupt Register to see if it's a
* PCI interrupt, and if _not_ then we'll pass it on to the
* ISA handler.
*/
intstatus = inw(0x500) & 15;
if (intstatus) {
/*
* This is a PCI interrupt. Check each bit and
* despatch an interrupt if it's set.
*/
if (intstatus & 8) handle_irq(16+3, regs);
if (intstatus & 4) handle_irq(16+2, regs);
if (intstatus & 2) handle_irq(16+1, regs);
if (intstatus & 1) handle_irq(16+0, regs);
} else {
isa_device_interrupt (vector, regs);
}
}
static void
takara_srm_device_interrupt(unsigned long vector, struct pt_regs * regs)
{
int irq = (vector - 0x800) >> 4;
handle_irq(irq, regs);
}
static void __init
takara_init_irq(void)
{
long i;
init_i8259a_irqs();
if (alpha_using_srm) {
alpha_mv.device_interrupt = takara_srm_device_interrupt;
} else {
unsigned int ctlreg = inl(0x500);
/* Return to non-accelerated mode. */
ctlreg &= ~0x8000;
outl(ctlreg, 0x500);
/* Enable the PCI interrupt register. */
ctlreg = 0x05107c00;
outl(ctlreg, 0x500);
}
for (i = 16; i < 128; i += 16)
takara_update_irq_hw(i, -1);
for (i = 16; i < 128; ++i) {
irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
irq_desc[i].chip = &takara_irq_type;
}
common_init_isa_dma();
}
/*
* The Takara has PCI devices 1, 2, and 3 configured to slots 20,
* 19, and 18 respectively, in the default configuration. They can
* also be jumpered to slots 8, 7, and 6 respectively, which is fun
* because the SIO ISA bridge can also be slot 7. However, the SIO
* doesn't explicitly generate PCI-type interrupts, so we can
* assign it whatever the hell IRQ we like and it doesn't matter.
*/
static int __init
takara_map_irq_srm(struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[15][5] __initdata = {
{ 16+3, 16+3, 16+3, 16+3, 16+3}, /* slot 6 == device 3 */
{ 16+2, 16+2, 16+2, 16+2, 16+2}, /* slot 7 == device 2 */
{ 16+1, 16+1, 16+1, 16+1, 16+1}, /* slot 8 == device 1 */
{ -1, -1, -1, -1, -1}, /* slot 9 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 10 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 11 == nothing */
/* These are behind the bridges. */
{ 12, 12, 13, 14, 15}, /* slot 12 == nothing */
{ 8, 8, 9, 19, 11}, /* slot 13 == nothing */
{ 4, 4, 5, 6, 7}, /* slot 14 == nothing */
{ 0, 0, 1, 2, 3}, /* slot 15 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 16 == nothing */
{64+ 0, 64+0, 64+1, 64+2, 64+3}, /* slot 17= device 4 */
{48+ 0, 48+0, 48+1, 48+2, 48+3}, /* slot 18= device 3 */
{32+ 0, 32+0, 32+1, 32+2, 32+3}, /* slot 19= device 2 */
{16+ 0, 16+0, 16+1, 16+2, 16+3}, /* slot 20= device 1 */
};
const long min_idsel = 6, max_idsel = 20, irqs_per_slot = 5;
int irq = COMMON_TABLE_LOOKUP;
if (irq >= 0 && irq < 16) {
/* Guess that we are behind a bridge. */
unsigned int busslot = PCI_SLOT(dev->bus->self->devfn);
irq += irq_tab[busslot-min_idsel][0];
}
return irq;
}
static int __init
takara_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[15][5] __initdata = {
{ 16+3, 16+3, 16+3, 16+3, 16+3}, /* slot 6 == device 3 */
{ 16+2, 16+2, 16+2, 16+2, 16+2}, /* slot 7 == device 2 */
{ 16+1, 16+1, 16+1, 16+1, 16+1}, /* slot 8 == device 1 */
{ -1, -1, -1, -1, -1}, /* slot 9 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 10 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 11 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 12 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 13 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 14 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 15 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 16 == nothing */
{ -1, -1, -1, -1, -1}, /* slot 17 == nothing */
{ 16+3, 16+3, 16+3, 16+3, 16+3}, /* slot 18 == device 3 */
{ 16+2, 16+2, 16+2, 16+2, 16+2}, /* slot 19 == device 2 */
{ 16+1, 16+1, 16+1, 16+1, 16+1}, /* slot 20 == device 1 */
};
const long min_idsel = 6, max_idsel = 20, irqs_per_slot = 5;
return COMMON_TABLE_LOOKUP;
}
static u8 __init
takara_swizzle(struct pci_dev *dev, u8 *pinp)
{
int slot = PCI_SLOT(dev->devfn);
int pin = *pinp;
unsigned int ctlreg = inl(0x500);
unsigned int busslot;
if (!dev->bus->self)
return slot;
busslot = PCI_SLOT(dev->bus->self->devfn);
/* Check for built-in bridges. */
if (dev->bus->number != 0
&& busslot > 16
&& ((1<<(36-busslot)) & ctlreg)) {
if (pin == 1)
pin += (20 - busslot);
else {
printk(KERN_WARNING "takara_swizzle: can only "
"handle cards with INTA IRQ pin.\n");
}
} else {
/* Must be a card-based bridge. */
printk(KERN_WARNING "takara_swizzle: cannot handle "
"card-bridge behind builtin bridge yet.\n");
}
*pinp = pin;
return slot;
}
static void __init
takara_init_pci(void)
{
if (alpha_using_srm)
alpha_mv.pci_map_irq = takara_map_irq_srm;
cia_init_pci();
ns87312_enable_ide(0x26e);
}
/*
* The System Vector
*/
struct alpha_machine_vector takara_mv __initmv = {
.vector_name = "Takara",
DO_EV5_MMU,
DO_DEFAULT_RTC,
DO_CIA_IO,
.machine_check = cia_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = CIA_DEFAULT_MEM_BASE,
.nr_irqs = 128,
.device_interrupt = takara_device_interrupt,
.init_arch = cia_init_arch,
.init_irq = takara_init_irq,
.init_rtc = common_init_rtc,
.init_pci = takara_init_pci,
.kill_arch = cia_kill_arch,
.pci_map_irq = takara_map_irq,
.pci_swizzle = takara_swizzle,
};
ALIAS_MV(takara)