a5c95e90c1
Several ASoC codec drivers use custom macros equivalent to the standard pr_ macros, most of which are not actually used. Replace these custom macros with the standard ones. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
818 lines
21 KiB
C
818 lines
21 KiB
C
/*
|
|
* wm8510.c -- WM8510 ALSA Soc Audio driver
|
|
*
|
|
* Copyright 2006 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
|
|
#include "wm8510.h"
|
|
|
|
#define AUDIO_NAME "wm8510"
|
|
#define WM8510_VERSION "0.6"
|
|
|
|
struct snd_soc_codec_device soc_codec_dev_wm8510;
|
|
|
|
/*
|
|
* wm8510 register cache
|
|
* We can't read the WM8510 register space when we are
|
|
* using 2 wire for device control, so we cache them instead.
|
|
*/
|
|
static const u16 wm8510_reg[WM8510_CACHEREGNUM] = {
|
|
0x0000, 0x0000, 0x0000, 0x0000,
|
|
0x0050, 0x0000, 0x0140, 0x0000,
|
|
0x0000, 0x0000, 0x0000, 0x00ff,
|
|
0x0000, 0x0000, 0x0100, 0x00ff,
|
|
0x0000, 0x0000, 0x012c, 0x002c,
|
|
0x002c, 0x002c, 0x002c, 0x0000,
|
|
0x0032, 0x0000, 0x0000, 0x0000,
|
|
0x0000, 0x0000, 0x0000, 0x0000,
|
|
0x0038, 0x000b, 0x0032, 0x0000,
|
|
0x0008, 0x000c, 0x0093, 0x00e9,
|
|
0x0000, 0x0000, 0x0000, 0x0000,
|
|
0x0003, 0x0010, 0x0000, 0x0000,
|
|
0x0000, 0x0002, 0x0001, 0x0000,
|
|
0x0000, 0x0000, 0x0039, 0x0000,
|
|
0x0001,
|
|
};
|
|
|
|
/*
|
|
* read wm8510 register cache
|
|
*/
|
|
static inline unsigned int wm8510_read_reg_cache(struct snd_soc_codec *codec,
|
|
unsigned int reg)
|
|
{
|
|
u16 *cache = codec->reg_cache;
|
|
if (reg == WM8510_RESET)
|
|
return 0;
|
|
if (reg >= WM8510_CACHEREGNUM)
|
|
return -1;
|
|
return cache[reg];
|
|
}
|
|
|
|
/*
|
|
* write wm8510 register cache
|
|
*/
|
|
static inline void wm8510_write_reg_cache(struct snd_soc_codec *codec,
|
|
u16 reg, unsigned int value)
|
|
{
|
|
u16 *cache = codec->reg_cache;
|
|
if (reg >= WM8510_CACHEREGNUM)
|
|
return;
|
|
cache[reg] = value;
|
|
}
|
|
|
|
/*
|
|
* write to the WM8510 register space
|
|
*/
|
|
static int wm8510_write(struct snd_soc_codec *codec, unsigned int reg,
|
|
unsigned int value)
|
|
{
|
|
u8 data[2];
|
|
|
|
/* data is
|
|
* D15..D9 WM8510 register offset
|
|
* D8...D0 register data
|
|
*/
|
|
data[0] = (reg << 1) | ((value >> 8) & 0x0001);
|
|
data[1] = value & 0x00ff;
|
|
|
|
wm8510_write_reg_cache(codec, reg, value);
|
|
if (codec->hw_write(codec->control_data, data, 2) == 2)
|
|
return 0;
|
|
else
|
|
return -EIO;
|
|
}
|
|
|
|
#define wm8510_reset(c) wm8510_write(c, WM8510_RESET, 0)
|
|
|
|
static const char *wm8510_companding[] = { "Off", "NC", "u-law", "A-law" };
|
|
static const char *wm8510_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
|
|
static const char *wm8510_alc[] = { "ALC", "Limiter" };
|
|
|
|
static const struct soc_enum wm8510_enum[] = {
|
|
SOC_ENUM_SINGLE(WM8510_COMP, 1, 4, wm8510_companding), /* adc */
|
|
SOC_ENUM_SINGLE(WM8510_COMP, 3, 4, wm8510_companding), /* dac */
|
|
SOC_ENUM_SINGLE(WM8510_DAC, 4, 4, wm8510_deemp),
|
|
SOC_ENUM_SINGLE(WM8510_ALC3, 8, 2, wm8510_alc),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8510_snd_controls[] = {
|
|
|
|
SOC_SINGLE("Digital Loopback Switch", WM8510_COMP, 0, 1, 0),
|
|
|
|
SOC_ENUM("DAC Companding", wm8510_enum[1]),
|
|
SOC_ENUM("ADC Companding", wm8510_enum[0]),
|
|
|
|
SOC_ENUM("Playback De-emphasis", wm8510_enum[2]),
|
|
SOC_SINGLE("DAC Inversion Switch", WM8510_DAC, 0, 1, 0),
|
|
|
|
SOC_SINGLE("Master Playback Volume", WM8510_DACVOL, 0, 127, 0),
|
|
|
|
SOC_SINGLE("High Pass Filter Switch", WM8510_ADC, 8, 1, 0),
|
|
SOC_SINGLE("High Pass Cut Off", WM8510_ADC, 4, 7, 0),
|
|
SOC_SINGLE("ADC Inversion Switch", WM8510_COMP, 0, 1, 0),
|
|
|
|
SOC_SINGLE("Capture Volume", WM8510_ADCVOL, 0, 127, 0),
|
|
|
|
SOC_SINGLE("DAC Playback Limiter Switch", WM8510_DACLIM1, 8, 1, 0),
|
|
SOC_SINGLE("DAC Playback Limiter Decay", WM8510_DACLIM1, 4, 15, 0),
|
|
SOC_SINGLE("DAC Playback Limiter Attack", WM8510_DACLIM1, 0, 15, 0),
|
|
|
|
SOC_SINGLE("DAC Playback Limiter Threshold", WM8510_DACLIM2, 4, 7, 0),
|
|
SOC_SINGLE("DAC Playback Limiter Boost", WM8510_DACLIM2, 0, 15, 0),
|
|
|
|
SOC_SINGLE("ALC Enable Switch", WM8510_ALC1, 8, 1, 0),
|
|
SOC_SINGLE("ALC Capture Max Gain", WM8510_ALC1, 3, 7, 0),
|
|
SOC_SINGLE("ALC Capture Min Gain", WM8510_ALC1, 0, 7, 0),
|
|
|
|
SOC_SINGLE("ALC Capture ZC Switch", WM8510_ALC2, 8, 1, 0),
|
|
SOC_SINGLE("ALC Capture Hold", WM8510_ALC2, 4, 7, 0),
|
|
SOC_SINGLE("ALC Capture Target", WM8510_ALC2, 0, 15, 0),
|
|
|
|
SOC_ENUM("ALC Capture Mode", wm8510_enum[3]),
|
|
SOC_SINGLE("ALC Capture Decay", WM8510_ALC3, 4, 15, 0),
|
|
SOC_SINGLE("ALC Capture Attack", WM8510_ALC3, 0, 15, 0),
|
|
|
|
SOC_SINGLE("ALC Capture Noise Gate Switch", WM8510_NGATE, 3, 1, 0),
|
|
SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8510_NGATE, 0, 7, 0),
|
|
|
|
SOC_SINGLE("Capture PGA ZC Switch", WM8510_INPPGA, 7, 1, 0),
|
|
SOC_SINGLE("Capture PGA Volume", WM8510_INPPGA, 0, 63, 0),
|
|
|
|
SOC_SINGLE("Speaker Playback ZC Switch", WM8510_SPKVOL, 7, 1, 0),
|
|
SOC_SINGLE("Speaker Playback Switch", WM8510_SPKVOL, 6, 1, 1),
|
|
SOC_SINGLE("Speaker Playback Volume", WM8510_SPKVOL, 0, 63, 0),
|
|
SOC_SINGLE("Speaker Boost", WM8510_OUTPUT, 2, 1, 0),
|
|
|
|
SOC_SINGLE("Capture Boost(+20dB)", WM8510_ADCBOOST, 8, 1, 0),
|
|
SOC_SINGLE("Mono Playback Switch", WM8510_MONOMIX, 6, 1, 1),
|
|
};
|
|
|
|
/* add non dapm controls */
|
|
static int wm8510_add_controls(struct snd_soc_codec *codec)
|
|
{
|
|
int err, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8510_snd_controls); i++) {
|
|
err = snd_ctl_add(codec->card,
|
|
snd_soc_cnew(&wm8510_snd_controls[i], codec,
|
|
NULL));
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Speaker Output Mixer */
|
|
static const struct snd_kcontrol_new wm8510_speaker_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_SPKMIX, 1, 1, 0),
|
|
SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_SPKMIX, 5, 1, 0),
|
|
SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_SPKMIX, 0, 1, 0),
|
|
};
|
|
|
|
/* Mono Output Mixer */
|
|
static const struct snd_kcontrol_new wm8510_mono_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_MONOMIX, 1, 1, 0),
|
|
SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_MONOMIX, 2, 1, 0),
|
|
SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_MONOMIX, 0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8510_boost_controls[] = {
|
|
SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA, 6, 1, 0),
|
|
SOC_DAPM_SINGLE("Aux Volume", WM8510_ADCBOOST, 0, 7, 0),
|
|
SOC_DAPM_SINGLE("Mic Volume", WM8510_ADCBOOST, 4, 7, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8510_micpga_controls[] = {
|
|
SOC_DAPM_SINGLE("MICP Switch", WM8510_INPUT, 0, 1, 0),
|
|
SOC_DAPM_SINGLE("MICN Switch", WM8510_INPUT, 1, 1, 0),
|
|
SOC_DAPM_SINGLE("AUX Switch", WM8510_INPUT, 2, 1, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8510_dapm_widgets[] = {
|
|
SND_SOC_DAPM_MIXER("Speaker Mixer", WM8510_POWER3, 2, 0,
|
|
&wm8510_speaker_mixer_controls[0],
|
|
ARRAY_SIZE(wm8510_speaker_mixer_controls)),
|
|
SND_SOC_DAPM_MIXER("Mono Mixer", WM8510_POWER3, 3, 0,
|
|
&wm8510_mono_mixer_controls[0],
|
|
ARRAY_SIZE(wm8510_mono_mixer_controls)),
|
|
SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8510_POWER3, 0, 0),
|
|
SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8510_POWER2, 0, 0),
|
|
SND_SOC_DAPM_PGA("Aux Input", WM8510_POWER1, 6, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("SpkN Out", WM8510_POWER3, 5, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("SpkP Out", WM8510_POWER3, 6, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Mono Out", WM8510_POWER3, 7, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA("Mic PGA", WM8510_POWER2, 2, 0,
|
|
&wm8510_micpga_controls[0],
|
|
ARRAY_SIZE(wm8510_micpga_controls)),
|
|
SND_SOC_DAPM_MIXER("Boost Mixer", WM8510_POWER2, 4, 0,
|
|
&wm8510_boost_controls[0],
|
|
ARRAY_SIZE(wm8510_boost_controls)),
|
|
|
|
SND_SOC_DAPM_MICBIAS("Mic Bias", WM8510_POWER1, 4, 0),
|
|
|
|
SND_SOC_DAPM_INPUT("MICN"),
|
|
SND_SOC_DAPM_INPUT("MICP"),
|
|
SND_SOC_DAPM_INPUT("AUX"),
|
|
SND_SOC_DAPM_OUTPUT("MONOOUT"),
|
|
SND_SOC_DAPM_OUTPUT("SPKOUTP"),
|
|
SND_SOC_DAPM_OUTPUT("SPKOUTN"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route audio_map[] = {
|
|
/* Mono output mixer */
|
|
{"Mono Mixer", "PCM Playback Switch", "DAC"},
|
|
{"Mono Mixer", "Aux Playback Switch", "Aux Input"},
|
|
{"Mono Mixer", "Line Bypass Switch", "Boost Mixer"},
|
|
|
|
/* Speaker output mixer */
|
|
{"Speaker Mixer", "PCM Playback Switch", "DAC"},
|
|
{"Speaker Mixer", "Aux Playback Switch", "Aux Input"},
|
|
{"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"},
|
|
|
|
/* Outputs */
|
|
{"Mono Out", NULL, "Mono Mixer"},
|
|
{"MONOOUT", NULL, "Mono Out"},
|
|
{"SpkN Out", NULL, "Speaker Mixer"},
|
|
{"SpkP Out", NULL, "Speaker Mixer"},
|
|
{"SPKOUTN", NULL, "SpkN Out"},
|
|
{"SPKOUTP", NULL, "SpkP Out"},
|
|
|
|
/* Microphone PGA */
|
|
{"Mic PGA", "MICN Switch", "MICN"},
|
|
{"Mic PGA", "MICP Switch", "MICP"},
|
|
{ "Mic PGA", "AUX Switch", "Aux Input" },
|
|
|
|
/* Boost Mixer */
|
|
{"Boost Mixer", "Mic PGA Switch", "Mic PGA"},
|
|
{"Boost Mixer", "Mic Volume", "MICP"},
|
|
{"Boost Mixer", "Aux Volume", "Aux Input"},
|
|
|
|
{"ADC", NULL, "Boost Mixer"},
|
|
};
|
|
|
|
static int wm8510_add_widgets(struct snd_soc_codec *codec)
|
|
{
|
|
snd_soc_dapm_new_controls(codec, wm8510_dapm_widgets,
|
|
ARRAY_SIZE(wm8510_dapm_widgets));
|
|
|
|
snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
|
|
|
|
snd_soc_dapm_new_widgets(codec);
|
|
return 0;
|
|
}
|
|
|
|
struct pll_ {
|
|
unsigned int pre_div:4; /* prescale - 1 */
|
|
unsigned int n:4;
|
|
unsigned int k;
|
|
};
|
|
|
|
static struct pll_ pll_div;
|
|
|
|
/* The size in bits of the pll divide multiplied by 10
|
|
* to allow rounding later */
|
|
#define FIXED_PLL_SIZE ((1 << 24) * 10)
|
|
|
|
static void pll_factors(unsigned int target, unsigned int source)
|
|
{
|
|
unsigned long long Kpart;
|
|
unsigned int K, Ndiv, Nmod;
|
|
|
|
Ndiv = target / source;
|
|
if (Ndiv < 6) {
|
|
source >>= 1;
|
|
pll_div.pre_div = 1;
|
|
Ndiv = target / source;
|
|
} else
|
|
pll_div.pre_div = 0;
|
|
|
|
if ((Ndiv < 6) || (Ndiv > 12))
|
|
printk(KERN_WARNING
|
|
"WM8510 N value %d outwith recommended range!d\n",
|
|
Ndiv);
|
|
|
|
pll_div.n = Ndiv;
|
|
Nmod = target % source;
|
|
Kpart = FIXED_PLL_SIZE * (long long)Nmod;
|
|
|
|
do_div(Kpart, source);
|
|
|
|
K = Kpart & 0xFFFFFFFF;
|
|
|
|
/* Check if we need to round */
|
|
if ((K % 10) >= 5)
|
|
K += 5;
|
|
|
|
/* Move down to proper range now rounding is done */
|
|
K /= 10;
|
|
|
|
pll_div.k = K;
|
|
}
|
|
|
|
static int wm8510_set_dai_pll(struct snd_soc_codec_dai *codec_dai,
|
|
int pll_id, unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 reg;
|
|
|
|
if (freq_in == 0 || freq_out == 0) {
|
|
/* Clock CODEC directly from MCLK */
|
|
reg = wm8510_read_reg_cache(codec, WM8510_CLOCK);
|
|
wm8510_write(codec, WM8510_CLOCK, reg & 0x0ff);
|
|
|
|
/* Turn off PLL */
|
|
reg = wm8510_read_reg_cache(codec, WM8510_POWER1);
|
|
wm8510_write(codec, WM8510_POWER1, reg & 0x1df);
|
|
return 0;
|
|
}
|
|
|
|
pll_factors(freq_out*8, freq_in);
|
|
|
|
wm8510_write(codec, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n);
|
|
wm8510_write(codec, WM8510_PLLK1, pll_div.k >> 18);
|
|
wm8510_write(codec, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff);
|
|
wm8510_write(codec, WM8510_PLLK3, pll_div.k & 0x1ff);
|
|
reg = wm8510_read_reg_cache(codec, WM8510_POWER1);
|
|
wm8510_write(codec, WM8510_POWER1, reg | 0x020);
|
|
|
|
/* Run CODEC from PLL instead of MCLK */
|
|
reg = wm8510_read_reg_cache(codec, WM8510_CLOCK);
|
|
wm8510_write(codec, WM8510_CLOCK, reg | 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configure WM8510 clock dividers.
|
|
*/
|
|
static int wm8510_set_dai_clkdiv(struct snd_soc_codec_dai *codec_dai,
|
|
int div_id, int div)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 reg;
|
|
|
|
switch (div_id) {
|
|
case WM8510_OPCLKDIV:
|
|
reg = wm8510_read_reg_cache(codec, WM8510_GPIO) & 0x1cf;
|
|
wm8510_write(codec, WM8510_GPIO, reg | div);
|
|
break;
|
|
case WM8510_MCLKDIV:
|
|
reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1f;
|
|
wm8510_write(codec, WM8510_CLOCK, reg | div);
|
|
break;
|
|
case WM8510_ADCCLK:
|
|
reg = wm8510_read_reg_cache(codec, WM8510_ADC) & 0x1f7;
|
|
wm8510_write(codec, WM8510_ADC, reg | div);
|
|
break;
|
|
case WM8510_DACCLK:
|
|
reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0x1f7;
|
|
wm8510_write(codec, WM8510_DAC, reg | div);
|
|
break;
|
|
case WM8510_BCLKDIV:
|
|
reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1e3;
|
|
wm8510_write(codec, WM8510_CLOCK, reg | div);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8510_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 iface = 0;
|
|
u16 clk = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1fe;
|
|
|
|
/* set master/slave audio interface */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
clk |= 0x0001;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* interface format */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
iface |= 0x0010;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
iface |= 0x0008;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
iface |= 0x00018;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* clock inversion */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
iface |= 0x0180;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
iface |= 0x0100;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
iface |= 0x0080;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
wm8510_write(codec, WM8510_IFACE, iface);
|
|
wm8510_write(codec, WM8510_CLOCK, clk);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_device *socdev = rtd->socdev;
|
|
struct snd_soc_codec *codec = socdev->codec;
|
|
u16 iface = wm8510_read_reg_cache(codec, WM8510_IFACE) & 0x19f;
|
|
u16 adn = wm8510_read_reg_cache(codec, WM8510_ADD) & 0x1f1;
|
|
|
|
/* bit size */
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
iface |= 0x0020;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
iface |= 0x0040;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
iface |= 0x0060;
|
|
break;
|
|
}
|
|
|
|
/* filter coefficient */
|
|
switch (params_rate(params)) {
|
|
case SNDRV_PCM_RATE_8000:
|
|
adn |= 0x5 << 1;
|
|
break;
|
|
case SNDRV_PCM_RATE_11025:
|
|
adn |= 0x4 << 1;
|
|
break;
|
|
case SNDRV_PCM_RATE_16000:
|
|
adn |= 0x3 << 1;
|
|
break;
|
|
case SNDRV_PCM_RATE_22050:
|
|
adn |= 0x2 << 1;
|
|
break;
|
|
case SNDRV_PCM_RATE_32000:
|
|
adn |= 0x1 << 1;
|
|
break;
|
|
case SNDRV_PCM_RATE_44100:
|
|
case SNDRV_PCM_RATE_48000:
|
|
break;
|
|
}
|
|
|
|
wm8510_write(codec, WM8510_IFACE, iface);
|
|
wm8510_write(codec, WM8510_ADD, adn);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8510_mute(struct snd_soc_codec_dai *dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u16 mute_reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0xffbf;
|
|
|
|
if (mute)
|
|
wm8510_write(codec, WM8510_DAC, mute_reg | 0x40);
|
|
else
|
|
wm8510_write(codec, WM8510_DAC, mute_reg);
|
|
return 0;
|
|
}
|
|
|
|
/* liam need to make this lower power with dapm */
|
|
static int wm8510_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
wm8510_write(codec, WM8510_POWER1, 0x1ff);
|
|
wm8510_write(codec, WM8510_POWER2, 0x1ff);
|
|
wm8510_write(codec, WM8510_POWER3, 0x1ff);
|
|
break;
|
|
case SND_SOC_BIAS_PREPARE:
|
|
case SND_SOC_BIAS_STANDBY:
|
|
break;
|
|
case SND_SOC_BIAS_OFF:
|
|
/* everything off, dac mute, inactive */
|
|
wm8510_write(codec, WM8510_POWER1, 0x0);
|
|
wm8510_write(codec, WM8510_POWER2, 0x0);
|
|
wm8510_write(codec, WM8510_POWER3, 0x0);
|
|
break;
|
|
}
|
|
codec->bias_level = level;
|
|
return 0;
|
|
}
|
|
|
|
#define WM8510_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
|
|
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
|
|
SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
|
|
|
|
#define WM8510_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
struct snd_soc_codec_dai wm8510_dai = {
|
|
.name = "WM8510 HiFi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8510_RATES,
|
|
.formats = WM8510_FORMATS,},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8510_RATES,
|
|
.formats = WM8510_FORMATS,},
|
|
.ops = {
|
|
.hw_params = wm8510_pcm_hw_params,
|
|
},
|
|
.dai_ops = {
|
|
.digital_mute = wm8510_mute,
|
|
.set_fmt = wm8510_set_dai_fmt,
|
|
.set_clkdiv = wm8510_set_dai_clkdiv,
|
|
.set_pll = wm8510_set_dai_pll,
|
|
},
|
|
};
|
|
EXPORT_SYMBOL_GPL(wm8510_dai);
|
|
|
|
static int wm8510_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->codec;
|
|
|
|
wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8510_resume(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->codec;
|
|
int i;
|
|
u8 data[2];
|
|
u16 *cache = codec->reg_cache;
|
|
|
|
/* Sync reg_cache with the hardware */
|
|
for (i = 0; i < ARRAY_SIZE(wm8510_reg); i++) {
|
|
data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
|
|
data[1] = cache[i] & 0x00ff;
|
|
codec->hw_write(codec->control_data, data, 2);
|
|
}
|
|
wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
wm8510_set_bias_level(codec, codec->suspend_bias_level);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* initialise the WM8510 driver
|
|
* register the mixer and dsp interfaces with the kernel
|
|
*/
|
|
static int wm8510_init(struct snd_soc_device *socdev)
|
|
{
|
|
struct snd_soc_codec *codec = socdev->codec;
|
|
int ret = 0;
|
|
|
|
codec->name = "WM8510";
|
|
codec->owner = THIS_MODULE;
|
|
codec->read = wm8510_read_reg_cache;
|
|
codec->write = wm8510_write;
|
|
codec->set_bias_level = wm8510_set_bias_level;
|
|
codec->dai = &wm8510_dai;
|
|
codec->num_dai = 1;
|
|
codec->reg_cache_size = ARRAY_SIZE(wm8510_reg);
|
|
codec->reg_cache = kmemdup(wm8510_reg, sizeof(wm8510_reg), GFP_KERNEL);
|
|
|
|
if (codec->reg_cache == NULL)
|
|
return -ENOMEM;
|
|
|
|
wm8510_reset(codec);
|
|
|
|
/* register pcms */
|
|
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "wm8510: failed to create pcms\n");
|
|
goto pcm_err;
|
|
}
|
|
|
|
/* power on device */
|
|
wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
wm8510_add_controls(codec);
|
|
wm8510_add_widgets(codec);
|
|
ret = snd_soc_register_card(socdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "wm8510: failed to register card\n");
|
|
goto card_err;
|
|
}
|
|
return ret;
|
|
|
|
card_err:
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
pcm_err:
|
|
kfree(codec->reg_cache);
|
|
return ret;
|
|
}
|
|
|
|
static struct snd_soc_device *wm8510_socdev;
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
|
|
/*
|
|
* WM8510 2 wire address is 0x1a
|
|
*/
|
|
#define I2C_DRIVERID_WM8510 0xfefe /* liam - need a proper id */
|
|
|
|
static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
|
|
|
|
/* Magic definition of all other variables and things */
|
|
I2C_CLIENT_INSMOD;
|
|
|
|
static struct i2c_driver wm8510_i2c_driver;
|
|
static struct i2c_client client_template;
|
|
|
|
/* If the i2c layer weren't so broken, we could pass this kind of data
|
|
around */
|
|
|
|
static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind)
|
|
{
|
|
struct snd_soc_device *socdev = wm8510_socdev;
|
|
struct wm8510_setup_data *setup = socdev->codec_data;
|
|
struct snd_soc_codec *codec = socdev->codec;
|
|
struct i2c_client *i2c;
|
|
int ret;
|
|
|
|
if (addr != setup->i2c_address)
|
|
return -ENODEV;
|
|
|
|
client_template.adapter = adap;
|
|
client_template.addr = addr;
|
|
|
|
i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
|
|
if (i2c == NULL) {
|
|
kfree(codec);
|
|
return -ENOMEM;
|
|
}
|
|
i2c_set_clientdata(i2c, codec);
|
|
codec->control_data = i2c;
|
|
|
|
ret = i2c_attach_client(i2c);
|
|
if (ret < 0) {
|
|
pr_err("failed to attach codec at addr %x\n", addr);
|
|
goto err;
|
|
}
|
|
|
|
ret = wm8510_init(socdev);
|
|
if (ret < 0) {
|
|
pr_err("failed to initialise WM8510\n");
|
|
goto err;
|
|
}
|
|
return ret;
|
|
|
|
err:
|
|
kfree(codec);
|
|
kfree(i2c);
|
|
return ret;
|
|
}
|
|
|
|
static int wm8510_i2c_detach(struct i2c_client *client)
|
|
{
|
|
struct snd_soc_codec *codec = i2c_get_clientdata(client);
|
|
i2c_detach_client(client);
|
|
kfree(codec->reg_cache);
|
|
kfree(client);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8510_i2c_attach(struct i2c_adapter *adap)
|
|
{
|
|
return i2c_probe(adap, &addr_data, wm8510_codec_probe);
|
|
}
|
|
|
|
/* corgi i2c codec control layer */
|
|
static struct i2c_driver wm8510_i2c_driver = {
|
|
.driver = {
|
|
.name = "WM8510 I2C Codec",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.id = I2C_DRIVERID_WM8510,
|
|
.attach_adapter = wm8510_i2c_attach,
|
|
.detach_client = wm8510_i2c_detach,
|
|
.command = NULL,
|
|
};
|
|
|
|
static struct i2c_client client_template = {
|
|
.name = "WM8510",
|
|
.driver = &wm8510_i2c_driver,
|
|
};
|
|
#endif
|
|
|
|
static int wm8510_probe(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct wm8510_setup_data *setup;
|
|
struct snd_soc_codec *codec;
|
|
int ret = 0;
|
|
|
|
pr_info("WM8510 Audio Codec %s", WM8510_VERSION);
|
|
|
|
setup = socdev->codec_data;
|
|
codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
|
|
if (codec == NULL)
|
|
return -ENOMEM;
|
|
|
|
socdev->codec = codec;
|
|
mutex_init(&codec->mutex);
|
|
INIT_LIST_HEAD(&codec->dapm_widgets);
|
|
INIT_LIST_HEAD(&codec->dapm_paths);
|
|
|
|
wm8510_socdev = socdev;
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
if (setup->i2c_address) {
|
|
normal_i2c[0] = setup->i2c_address;
|
|
codec->hw_write = (hw_write_t)i2c_master_send;
|
|
ret = i2c_add_driver(&wm8510_i2c_driver);
|
|
if (ret != 0)
|
|
printk(KERN_ERR "can't add i2c driver");
|
|
}
|
|
#else
|
|
/* Add other interfaces here */
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
/* power down chip */
|
|
static int wm8510_remove(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->codec;
|
|
|
|
if (codec->control_data)
|
|
wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
i2c_del_driver(&wm8510_i2c_driver);
|
|
#endif
|
|
kfree(codec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct snd_soc_codec_device soc_codec_dev_wm8510 = {
|
|
.probe = wm8510_probe,
|
|
.remove = wm8510_remove,
|
|
.suspend = wm8510_suspend,
|
|
.resume = wm8510_resume,
|
|
};
|
|
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8510);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8510 driver");
|
|
MODULE_AUTHOR("Liam Girdwood");
|
|
MODULE_LICENSE("GPL");
|