cda13dd164
This patch converts the remaining 83xx boards to the dts-v1 format. This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx, mpc8349emitxgp and the mpc836x_mds. The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already dts-v1 and only undergo minor changes for the sake of formatting consistency across the whole group of boards; i.e. the idea being that you can do a "diff -u board_A.dts board_B.dts" and see something meaningful. The general rule I've applied is that entries for values normally parsed by humans are left in decimal (i.e. IRQ, cache size, clock rates, basic counts and indexes) and all other data (i.e. reg and ranges, IRQ flags etc.) remain in hex. I've used dtc to confirm that the output prior to this changeset matches the output after this changeset is applied for all boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
306 lines
7.0 KiB
Plaintext
306 lines
7.0 KiB
Plaintext
/*
|
|
* MPC832x RDB Device Tree Source
|
|
*
|
|
* Copyright 2007 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "MPC8323ERDB";
|
|
compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8323@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <0x20>; // 32 bytes
|
|
i-cache-line-size = <0x20>; // 32 bytes
|
|
d-cache-size = <16384>; // L1, 16K
|
|
i-cache-size = <16384>; // L1, 16K
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x04000000>;
|
|
};
|
|
|
|
soc8323@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <0>;
|
|
|
|
wdt@200 {
|
|
device_type = "watchdog";
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <0x200 0x100>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&pic>;
|
|
dfsrr;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&pic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = <&pic>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
device_type = "crypto";
|
|
model = "SEC2";
|
|
compatible = "talitos";
|
|
reg = <0x30000 0x7000>;
|
|
interrupts = <11 0x8>;
|
|
interrupt-parent = <&pic>;
|
|
/* Rev. 2.2 */
|
|
num-channels = <1>;
|
|
channel-fifo-len = <24>;
|
|
exec-units-mask = <0x0000004c>;
|
|
descriptor-types-mask = <0x0122003f>;
|
|
};
|
|
|
|
pic:pic@700 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
|
|
par_io@1400 {
|
|
reg = <0x1400 0x100>;
|
|
device_type = "par_io";
|
|
num-ports = <7>;
|
|
|
|
ucc2pio:ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
3 4 3 0 2 0 /* MDIO */
|
|
3 5 1 0 2 0 /* MDC */
|
|
3 21 2 0 1 0 /* RX_CLK (CLK16) */
|
|
3 23 2 0 1 0 /* TX_CLK (CLK3) */
|
|
0 18 1 0 1 0 /* TxD0 */
|
|
0 19 1 0 1 0 /* TxD1 */
|
|
0 20 1 0 1 0 /* TxD2 */
|
|
0 21 1 0 1 0 /* TxD3 */
|
|
0 22 2 0 1 0 /* RxD0 */
|
|
0 23 2 0 1 0 /* RxD1 */
|
|
0 24 2 0 1 0 /* RxD2 */
|
|
0 25 2 0 1 0 /* RxD3 */
|
|
0 26 2 0 1 0 /* RX_ER */
|
|
0 27 1 0 1 0 /* TX_ER */
|
|
0 28 2 0 1 0 /* RX_DV */
|
|
0 29 2 0 1 0 /* COL */
|
|
0 30 1 0 1 0 /* TX_EN */
|
|
0 31 2 0 1 0>; /* CRS */
|
|
};
|
|
ucc3pio:ucc_pin@03 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 13 2 0 1 0 /* RX_CLK (CLK9) */
|
|
3 24 2 0 1 0 /* TX_CLK (CLK10) */
|
|
1 0 1 0 1 0 /* TxD0 */
|
|
1 1 1 0 1 0 /* TxD1 */
|
|
1 2 1 0 1 0 /* TxD2 */
|
|
1 3 1 0 1 0 /* TxD3 */
|
|
1 4 2 0 1 0 /* RxD0 */
|
|
1 5 2 0 1 0 /* RxD1 */
|
|
1 6 2 0 1 0 /* RxD2 */
|
|
1 7 2 0 1 0 /* RxD3 */
|
|
1 8 2 0 1 0 /* RX_ER */
|
|
1 9 1 0 1 0 /* TX_ER */
|
|
1 10 2 0 1 0 /* RX_DV */
|
|
1 11 2 0 1 0 /* COL */
|
|
1 12 1 0 1 0 /* TX_EN */
|
|
1 13 2 0 1 0>; /* CRS */
|
|
};
|
|
};
|
|
};
|
|
|
|
qe@e0100000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "qe";
|
|
compatible = "fsl,qe";
|
|
ranges = <0x0 0xe0100000 0x00100000>;
|
|
reg = <0xe0100000 0x480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <198000000>;
|
|
|
|
muram@10000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
ranges = <0x0 0x00010000 0x00004000>;
|
|
|
|
data-only@0 {
|
|
compatible = "fsl,qe-muram-data",
|
|
"fsl,cpm-muram-data";
|
|
reg = <0x0 0x4000>;
|
|
};
|
|
};
|
|
|
|
spi@4c0 {
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x4c0 0x40>;
|
|
interrupts = <2>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu-qe";
|
|
};
|
|
|
|
spi@500 {
|
|
cell-index = <1>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x500 0x40>;
|
|
interrupts = <1>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
enet0: ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
model = "UCC";
|
|
cell-index = <2>;
|
|
device-id = <2>;
|
|
reg = <0x3000 0x200>;
|
|
interrupts = <33>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "clk16";
|
|
tx-clock-name = "clk3";
|
|
phy-handle = <&phy00>;
|
|
pio-handle = <&ucc2pio>;
|
|
};
|
|
|
|
enet1: ucc@2200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
model = "UCC";
|
|
cell-index = <3>;
|
|
device-id = <3>;
|
|
reg = <0x2200 0x200>;
|
|
interrupts = <34>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "clk9";
|
|
tx-clock-name = "clk10";
|
|
phy-handle = <&phy04>;
|
|
pio-handle = <&ucc3pio>;
|
|
};
|
|
|
|
mdio@3120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3120 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
phy00:ethernet-phy@00 {
|
|
interrupt-parent = <&pic>;
|
|
interrupts = <0>;
|
|
reg = <0x0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy04:ethernet-phy@04 {
|
|
interrupt-parent = <&pic>;
|
|
interrupts = <0>;
|
|
reg = <0x4>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
qeic:interrupt-controller@80 {
|
|
interrupt-controller;
|
|
compatible = "fsl,qe-ic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x80 0x80>;
|
|
big-endian;
|
|
interrupts = <32 0x8 33 0x8>; //high:32 low:33
|
|
interrupt-parent = <&pic>;
|
|
};
|
|
};
|
|
|
|
pci0: pci@e0008500 {
|
|
cell-index = <1>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x10 AD16 (USB) */
|
|
0x8000 0x0 0x0 0x1 &pic 17 0x8
|
|
|
|
/* IDSEL 0x11 AD17 (Mini1)*/
|
|
0x8800 0x0 0x0 0x1 &pic 18 0x8
|
|
0x8800 0x0 0x0 0x2 &pic 19 0x8
|
|
0x8800 0x0 0x0 0x3 &pic 20 0x8
|
|
0x8800 0x0 0x0 0x4 &pic 48 0x8
|
|
|
|
/* IDSEL 0x12 AD18 (PCI/Mini2) */
|
|
0x9000 0x0 0x0 0x1 &pic 19 0x8
|
|
0x9000 0x0 0x0 0x2 &pic 20 0x8
|
|
0x9000 0x0 0x0 0x3 &pic 48 0x8
|
|
0x9000 0x0 0x0 0x4 &pic 17 0x8>;
|
|
|
|
interrupt-parent = <&pic>;
|
|
interrupts = <66 0x8>;
|
|
bus-range = <0x0 0x0>;
|
|
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
|
0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
|
|
clock-frequency = <0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0008500 0x100>;
|
|
compatible = "fsl,mpc8349-pci";
|
|
device_type = "pci";
|
|
};
|
|
};
|