657ebfadc1
clock34xx_data.c now contains data for the OMAP34xx family, the OMAP36xx family, and the OMAP3517 family, so rename it to clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the chip family-specific clock functions to clock34xx.c, clock36xx.c, or clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3 superset. The main goal here is to prepare to compile chip family-specific clock functions only for kernel builds that target that chip family. To get to that point, we also need to add CONFIG_SOC_* options for those other chip families; that will be done in future patches, planned for 2.6.35. OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL clkops structure. The OMAP4 variant of this clkops structure has been removed, and since there was nothing else currently in clock44xx.c, it too has been removed -- it can always be added back later when there is some content for it. (The OMAP4 clock autogeneration scripts have been updated accordingly.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Ranjith Lohithakshan <ranjithl@ti.com> Cc: Tony Lindgren <tony@atomide.com>
122 lines
3.1 KiB
C
122 lines
3.1 KiB
C
/*
|
|
* OMAP34xx M2 divider clock code
|
|
*
|
|
* Copyright (C) 2007-2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2007-2010 Nokia Corporation
|
|
*
|
|
* Paul Walmsley
|
|
* Jouni Högander
|
|
*
|
|
* Parts of this code are based on code written by
|
|
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <plat/clock.h>
|
|
#include <plat/sram.h>
|
|
#include <plat/sdrc.h>
|
|
|
|
#include "clock.h"
|
|
#include "clock3xxx.h"
|
|
#include "clock34xx.h"
|
|
#include "sdrc.h"
|
|
|
|
#define CYCLES_PER_MHZ 1000000
|
|
|
|
/*
|
|
* CORE DPLL (DPLL3) M2 divider rate programming functions
|
|
*
|
|
* These call into SRAM code to do the actual CM writes, since the SDRAM
|
|
* is clocked from DPLL3.
|
|
*/
|
|
|
|
/**
|
|
* omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
|
|
* @clk: struct clk * of DPLL to set
|
|
* @rate: rounded target rate
|
|
*
|
|
* Program the DPLL M2 divider with the rounded target rate. Returns
|
|
* -EINVAL upon error, or 0 upon success.
|
|
*/
|
|
int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
|
|
{
|
|
u32 new_div = 0;
|
|
u32 unlock_dll = 0;
|
|
u32 c;
|
|
unsigned long validrate, sdrcrate, _mpurate;
|
|
struct omap_sdrc_params *sdrc_cs0;
|
|
struct omap_sdrc_params *sdrc_cs1;
|
|
int ret;
|
|
|
|
if (!clk || !rate)
|
|
return -EINVAL;
|
|
|
|
validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
|
|
if (validrate != rate)
|
|
return -EINVAL;
|
|
|
|
sdrcrate = sdrc_ick_p->rate;
|
|
if (rate > clk->rate)
|
|
sdrcrate <<= ((rate / clk->rate) >> 1);
|
|
else
|
|
sdrcrate >>= ((clk->rate / rate) >> 1);
|
|
|
|
ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
|
|
pr_debug("clock: will unlock SDRC DLL\n");
|
|
unlock_dll = 1;
|
|
}
|
|
|
|
/*
|
|
* XXX This only needs to be done when the CPU frequency changes
|
|
*/
|
|
_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
|
|
c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
|
|
c += 1; /* for safety */
|
|
c *= SDRC_MPURATE_LOOPS;
|
|
c >>= SDRC_MPURATE_SCALE;
|
|
if (c == 0)
|
|
c = 1;
|
|
|
|
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
|
|
validrate);
|
|
pr_debug("clock: SDRC CS0 timing params used:"
|
|
" RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
|
|
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
|
|
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
|
|
if (sdrc_cs1)
|
|
pr_debug("clock: SDRC CS1 timing params used: "
|
|
" RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
|
|
sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
|
|
sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
|
|
|
|
if (sdrc_cs1)
|
|
omap3_configure_core_dpll(
|
|
new_div, unlock_dll, c, rate > clk->rate,
|
|
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
|
|
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
|
|
sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
|
|
sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
|
|
else
|
|
omap3_configure_core_dpll(
|
|
new_div, unlock_dll, c, rate > clk->rate,
|
|
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
|
|
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
|
|
0, 0, 0, 0);
|
|
|
|
return 0;
|
|
}
|
|
|