lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a8cb5601e8
android_kernel_xiaomi_sm8350/configs/default_defconfig
Pankaj Singh 1c188ac710 qcacld-3.0: Add support for WLAN thermal mitigation 
As part of new requirement WLAN subsystem needs to perform thermal
mitigation action as per the thermal state of the device. The
wifi hal sends vendor command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
with the thermal level parameter and wlan host performs the required
appropriate action. wlan host driver maps the thermal level to
corresponding duty cycle off percent value and duty cycle value,
send WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.

Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW

change-ID: Ib2152bd4349786d1624eca480790e772414f9df6
CRs-Fixed: 2613529
2020-01-31 11:21:51 -08:00

1017 lines
22 KiB
Plaintext
Raw Blame History

ifeq ($(CONFIG_CNSS_QCA6290), y)
ifeq ($(CONFIG_CNSS_EMULATION), y)
CONFIG_QCA_WIFI_NAPIER_EMULATION := y
endif
CONFIG_LITHIUM := y
CONFIG_QCA6290_11AX := y
CONFIG_WLAN_FEATURE_11AX := y
CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y
CONFIG_IPA3 := n
endif
ifeq ($(CONFIG_CNSS_QCA6390), y)
ifeq ($(CONFIG_CNSS_EMULATION), y)
CONFIG_QCA_WIFI_NAPIER_EMULATION := y
endif
CONFIG_LITHIUM := y
CONFIG_WLAN_FEATURE_11AX := y
CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y
ifeq ($(CONFIG_ARCH_SDM845), y)
CONFIG_IPA3 := n
endif
CONFIG_SCALE_INCLUDES := y
CONFIG_HASTINGS_BT_WAR := y
CONFIG_WDI3_IPA_OVER_GSI :=y
CONFIG_DIRECT_BUF_RX_ENABLE := y
CONFIG_WMI_DBR_SUPPORT := y
endif
ifeq ($(CONFIG_CNSS_QCA6490), y)
ifeq ($(CONFIG_CNSS_EMULATION), y)
CONFIG_QCA_WIFI_NAPIER_EMULATION := y
endif
CONFIG_LITHIUM := y
CONFIG_WLAN_FEATURE_11AX := y
CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y
ifeq ($(CONFIG_ARCH_SDM845), y)
CONFIG_IPA3 := n
endif
CONFIG_SCALE_INCLUDES := y
CONFIG_HASTINGS_BT_WAR := y
CONFIG_WDI3_IPA_OVER_GSI :=y
endif
ifeq ($(CONFIG_CLD_HL_SDIO_CORE), y)
CONFIG_QCA_WIFI_SDIO := y
ifndef CONFIG_SDIO_TRANSFER
CONFIG_SDIO_TRANSFER = mailbox
endif
endif
ifeq ($(CONFIG_QCA_WIFI_SDIO), y)
CONFIG_ROME_IF = sdio
endif
ifdef CONFIG_ICNSS
CONFIG_ROME_IF = snoc
endif
ifeq (y,$(findstring y,$(CONFIG_CNSS) $(CONFIG_CNSS2)))
ifndef CONFIG_ROME_IF
#use pci as default interface
CONFIG_ROME_IF = pci
endif
endif
ifeq (m,$(findstring m,$(CONFIG_CNSS2)))
ifndef CONFIG_ROME_IF
#use pci as default interface
CONFIG_ROME_IF = pci
endif
endif
# Make WLAN as open-source driver by default
WLAN_OPEN_SOURCE := y
ifeq ($(CONFIG_ICNSS), y)
CONFIG_HELIUMPLUS := y
CONFIG_64BIT_PADDR := y
CONFIG_FEATURE_TSO := y
CONFIG_FEATURE_TSO_DEBUG := y
ifeq ($(CONFIG_INET_LRO), y)
CONFIG_WLAN_LRO := y
else
CONFIG_WLAN_LRO := n
endif
endif
ifneq ($(DEVELOPER_DISABLE_BUILD_TIMESTAMP), y)
ifneq ($(WLAN_DISABLE_BUILD_TAG), y)
CONFIG_BUILD_TAG := y
endif
endif
ifeq ($(CONFIG_ARCH_MDM9630), y)
CONFIG_MOBILE_ROUTER := y
endif
ifeq ($(CONFIG_ARCH_MDM9640), y)
CONFIG_MOBILE_ROUTER := y
endif
ifeq ($(CONFIG_ARCH_SDX20), y)
CONFIG_MOBILE_ROUTER := y
endif
ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y)
CONFIG_MOBILE_ROUTER := y
endif
ifeq ($(CONFIG_ARCH_MSM8917), y)
ifeq ($(CONFIG_ROME_IF), sdio)
CONFIG_WLAN_SYNC_TSF_PLUS := y
endif
endif
ifeq (y,$(findstring y,$(CONFIG_ARCH_QCS405) $(CONFIG_ARCH_QCS403)))
CONFIG_ARCH_QCS40X := y
endif
ifeq ($(CONFIG_ARCH_QCS40X), y)
CONFIG_WLAN_SYNC_TSF_PLUS := y
CONFIG_WLAN_SYNC_TSF_PLUS_NOIRQ := y
CONFIG_RX_PERFORMANCE := y
CONFIG_TGT_NUM_MSDU_DESC := 900
CONFIG_MULTI_IF_LOG := y
CONFIG_DFS_PRI_MULTIPLIER := y
CONFIG_DFS_OVERRIDE_RF_THRESHOLD := y
endif
CONFIG_WLAN_FEATURE_MBSSID := y
#Flag to enable Legacy Fast Roaming3(LFR3)
ifeq (y,$(findstring y,$(CONFIG_HELIUMPLUS) $(CONFIG_LITHIUM)))
CONFIG_QCACLD_WLAN_LFR3 := y
else
CONFIG_QCACLD_WLAN_LFR2 := y
endif
ifneq ($(CONFIG_MOBILE_ROUTER), y)
#Flag to enable TDLS feature
CONFIG_QCOM_TDLS := y
CONFIG_WLAN_SYSFS := y
#Enable Beacon Reception Stats
CONFIG_FEATURE_BECN_STATS := y
endif
#Disable the Export Symbol config
CONFIG_WLAN_DISABLE_EXPORT_SYMBOL := y
CONFIG_QCACLD_FEATURE_GREEN_AP := y
#Flag to enable Android Packet Filtering
CONFIG_QCACLD_FEATURE_APF := y
#Flag to enable SARv1 -> SARv2 conversion
CONFIG_WLAN_FEATURE_SARV1_TO_SARV2 := n
#Flag to enable get firmware state
CONFIG_QCACLD_FEATURE_FW_STATE := y
#Flag to enable set coex configuration
CONFIG_QCACLD_FEATURE_COEX_CONFIG := n
#Flag to enable get hw capability
ifeq ($(CONFIG_ARCH_QCS40X), y)
CONFIG_QCACLD_FEATURE_HW_CAPABILITY := y
endif
ifeq ($(CONFIG_ARCH_MSM8998), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_SDM660), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_SDM630), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_SDM845), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_SM8150), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_SDM670), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_SM6150), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_LITO), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_BENGAL), y)
CONFIG_QCACLD_FEATURE_METERING := y
endif
ifeq ($(CONFIG_ARCH_KONA), y)
CONFIG_QCACLD_FEATURE_METERING := y
CONFIG_WDI3_STATS_UPDATE := y
CONFIG_WLAN_SYNC_TSF_TIMER := y
endif
#Flag to enable Fast Transition (11r) feature
CONFIG_QCOM_VOWIFI_11R := y
#Flag to enable disable ACTION OUI feature
CONFIG_WLAN_FEATURE_ACTION_OUI := y
#Flag to enable Adaptive 11r feature
CONFIG_ADAPTIVE_11R := y
#Flag to enable FILS Feature (11ai)
CONFIG_WLAN_FEATURE_FILS := y
ifneq ($(CONFIG_QCA_CLD_WLAN),)
ifeq (y,$(findstring y,$(CONFIG_CNSS) $(CONFIG_CNSS2) $(CONFIG_ICNSS)))
#Flag to enable Protected Management Frames (11w) feature
CONFIG_WLAN_FEATURE_11W := y
#Flag to enable LTE CoEx feature
CONFIG_QCOM_LTE_COEX := y
ifneq ($(CONFIG_MOBILE_ROUTER), y)
#Flag to enable LPSS feature
CONFIG_WLAN_FEATURE_LPSS := y
endif
endif
ifeq (m,$(findstring m,$(CONFIG_CNSS2)))
#Flag to enable Protected Management Frames (11w) feature
CONFIG_WLAN_FEATURE_11W := y
#Flag to enable LTE CoEx feature
CONFIG_QCOM_LTE_COEX := y
ifneq ($(CONFIG_MOBILE_ROUTER), y)
#Flag to enable LPSS feature
CONFIG_WLAN_FEATURE_LPSS := y
endif
endif
endif
#Flag to enable Protected Management Frames (11w) feature
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_WLAN_FEATURE_11W := y
endif
ifeq ($(CONFIG_ROME_IF),sdio)
CONFIG_WLAN_FEATURE_11W := y
endif
#Flag to enable the tx desc sanity check
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_QCA_TXDESC_SANITY_CHECKS := y
endif
ifneq ($(CONFIG_MOBILE_ROUTER), y)
#Flag to enable NAN
CONFIG_QCACLD_FEATURE_NAN := y
endif
#Flag to enable Linux QCMBR feature as default feature
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_LINUX_QCMBR :=y
endif
CONFIG_FEATURE_EPPING := y
#Flag to enable offload packets feature
CONFIG_WLAN_OFFLOAD_PACKETS := y
#enable TSF get feature
CONFIG_WLAN_SYNC_TSF := y
#Enable DSRC feature
ifeq ($(CONFIG_QCA_WIFI_SDIO), y)
CONFIG_WLAN_FEATURE_DSRC := y
endif
ifneq ($(CONFIG_ROME_IF),usb)
#Flag to enable SAE
CONFIG_WLAN_FEATURE_SAE := y
ifneq ($(CONFIG_ROME_IF),sdio)
#Flag to enable DISA
CONFIG_WLAN_FEATURE_DISA := y
#Flag to enable FIPS
CONFIG_WLAN_FEATURE_FIPS := y
#Flag to enable Fast Path feature
ifneq ($(CONFIG_LITHIUM), y)
CONFIG_WLAN_FASTPATH := y
endif
# Flag to enable NAPI
CONFIG_WLAN_NAPI := y
CONFIG_WLAN_NAPI_DEBUG := n
# Flag to enable FW based TX Flow control
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_WLAN_TX_FLOW_CONTROL_V2 := y
else
CONFIG_WLAN_TX_FLOW_CONTROL_V2 := n
endif
endif
endif
CONFIG_POWER_MANAGEMENT_OFFLOAD := y
ifeq ($(CONFIG_ROME_IF), snoc)
CONFIG_WLAN_TX_FLOW_CONTROL_V2 := y
endif
ifeq ($(CONFIG_ARCH_QCS40X), y)
CONFIG_WLAN_TX_FLOW_CONTROL_V2 := n
# Flag to improve TCP TX throughput for both
# CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY and CONFIG_WLAN_TX_FLOW_CONTROL_V2
# disabled platform, avoid frame drop in driver
CONFIG_WLAN_PDEV_TX_FLOW_CONTROL := y
endif
# Flag to enable LFR Subnet Detection
CONFIG_LFR_SUBNET_DETECTION := y
# Flag to enable MCC to SCC switch feature
CONFIG_MCC_TO_SCC_SWITCH := y
ifeq ($(CONFIG_SLUB_DEBUG), y)
# Enable Obj Mgr Degug services if slub build
CONFIG_WLAN_OBJMGR_DEBUG:= y
CONFIG_MPC_UT_FRAMEWORK := y
CONFIG_LOCK_STATS_ON:= y
endif
ifeq (y,$(findstring y,$(CONFIG_QCA_WIFI_SDIO) $(CONFIG_HIF_USB)))
CONFIG_HL_DP_SUPPORT := y
else
CONFIG_LL_DP_SUPPORT := y
endif
ifeq ($(CONFIG_ROME_IF),pci)
ifneq ($(CONFIG_WLAN_TX_FLOW_CONTROL_V2), y)
ifneq ($(CONFIG_LITHIUM), y)
CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY := y
endif
endif
endif
#Whether have QMI support
CONFIG_QMI_SUPPORT := y
ifeq ($(CONFIG_ICNSS), y)
CONFIG_WIFI_3_0_ADRASTEA := y
CONFIG_ADRASTEA_RRI_ON_DDR := y
# Enable athdiag procfs debug support for adrastea
CONFIG_ATH_PROCFS_DIAG_SUPPORT := y
# Enable 11AC TX compact feature for adrastea
CONFIG_ATH_11AC_TXCOMPACT := y
ifeq ($(CONFIG_QMI_SUPPORT), y)
CONFIG_ADRASTEA_SHADOW_REGISTERS := y
endif
endif
# Enable fw stats version 2
ifeq (y,$(findstring y,$(CONFIG_HELIUMPLUS) $(CONFIG_LITHIUM)))
CONFIG_AR900B := y
endif
# NOTE: CONFIG_64BIT_PADDR requires CONFIG_HELIUMPLUS
ifeq ($(CONFIG_HELIUMPLUS), y)
ifeq ($(CONFIG_64BIT_PADDR), y)
CONFIG_HTT_PADDR64 := y
endif
ifeq ($(CONFIG_SLUB_DEBUG_ON), y)
CONFIG_OL_RX_INDICATION_RECORD := y
CONFIG_TSOSEG_DEBUG := y
CONFIG_HIF_LARGE_CE_RING_HISTORY := 8192
endif
endif #CONFIG_HELIUMPLUS
ifeq ($(CONFIG_LITHIUM), y)
#
# Enable Shadow V2 for all lithium platform
#
CONFIG_SHADOW_V2 := y
ifeq ($(CONFIG_CNSS_QCA6290), y)
CONFIG_QCA6290_HEADERS_DEF := y
CONFIG_QCA_WIFI_QCA6290 := y
endif
ifeq ($(CONFIG_CNSS_QCA6390), y)
CONFIG_QCA6390_HEADERS_DEF := y
CONFIG_QCA_WIFI_QCA6390 := y
endif
ifeq ($(CONFIG_CNSS_QCA6490), y)
CONFIG_QCA6490_HEADERS_DEF := y
CONFIG_QCA_WIFI_QCA6490 := y
endif
ifeq ($(CONFIG_LITHIUM), y)
#
# Enable VERBOSE debug INI mechanism
#
CONFIG_VERBOSE_DEBUG := y
endif
CONFIG_QCA_WIFI_QCA8074 := y
CONFIG_QCA_WIFI_QCA8074_VP := y
CONFIG_DP_INTR_POLL_BASED := y
CONFIG_TX_PER_PDEV_DESC_POOL := y
CONFIG_DP_TRACE := y
CONFIG_FEATURE_TSO := y
CONFIG_FEATURE_FORCE_WAKE := y
CONFIG_DP_LFR := y
CONFIG_DUP_RX_DESC_WAR := y
CONFIG_HTT_PADDR64 := y
CONFIG_RX_OL := y
CONFIG_TX_TID_OVERRIDE := y
CONFIG_DP_TXRX_SOC_ATTACH := y
CONFIG_WLAN_CLD_PM_QOS := y
CONFIG_DISABLE_DP_STATS := n
CONFIG_REO_DESC_DEFER_FREE := y
CONFIG_RXDMA_ERR_PKT_DROP := y
ifeq ($(CONFIG_FEATURE_TSO), y)
CONFIG_FEATURE_TSO_STATS := y
CONFIG_TSO_DEBUG_LOG_ENABLE := y
endif
ifeq ($(CONFIG_DISABLE_DP_STATS), y)
CONFIG_FEATURE_TSO_STATS := n
endif
endif
# As per target team, build is done as follows:
# Defconfig : build with default flags
# Slub : defconfig + CONFIG_SLUB_DEBUG=y +
# CONFIG_SLUB_DEBUG_ON=y + CONFIG_PAGE_POISONING=y
# Perf : Using appropriate msmXXXX-perf_defconfig
#
# Shipment builds (user variants) should not have any debug feature
# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
# there is no other way to identify defconfig builds, QCOMs internal
# representation of perf builds (identified using the string 'perf'),
# is used to identify if the build is a slub or defconfig one. This
# way no critical debug feature will be enabled for perf and shipment
# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
# config.
ifneq ($(TARGET_BUILD_VARIANT),user)
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_FEATURE_PKTLOG := n
else
CONFIG_FEATURE_PKTLOG := y
endif
CONFIG_WLAN_DEBUG_CRASH_INJECT := y
endif
#Enable WLAN/Power debugfs feature only if debug_fs is enabled
ifeq ($(CONFIG_DEBUG_FS), y)
# Flag to enable debugfs. Depends on CONFIG_DEBUG_FS in kernel
# configuration.
CONFIG_WLAN_DEBUGFS := y
CONFIG_WLAN_POWER_DEBUGFS := y
endif
ifeq ($(CONFIG_WLAN_DEBUGFS), y)
CONFIG_WLAN_MWS_INFO_DEBUGFS := y
CONFIG_WLAN_FEATURE_MIB_STATS := y
else
CONFIG_WLAN_MWS_INFO_DEBUGFS := n
CONFIG_WLAN_FEATURE_MIB_STATS := n
endif
# Feature flags which are not (currently) configurable via Kconfig
#Whether to build debug version
BUILD_DEBUG_VERSION := y
#Enable this flag to build driver in diag version
BUILD_DIAG_VERSION := y
ifeq ($(CONFIG_SLUB_DEBUG), y)
PANIC_ON_BUG := y
WLAN_WARN_ON_ASSERT := y
else ifeq ($(CONFIG_PERF_DEBUG), y)
PANIC_ON_BUG := y
WLAN_WARN_ON_ASSERT := y
else
PANIC_ON_BUG := n
WLAN_WARN_ON_ASSERT := n
endif
# Compile all log levels by default
CONFIG_WLAN_LOG_FATAL := y
CONFIG_WLAN_LOG_ERROR := y
CONFIG_WLAN_LOG_WARN := y
CONFIG_WLAN_LOG_INFO := y
CONFIG_WLAN_LOG_DEBUG := y
CONFIG_WLAN_LOG_ENTER := y
CONFIG_WLAN_LOG_EXIT := y
#Enable OL debug and wmi unified functions
CONFIG_ATH_PERF_PWR_OFFLOAD := y
#Disable packet log
CONFIG_REMOVE_PKT_LOG := n
#Enable 11AC TX
ifeq ($(CONFIG_ROME_IF),pci)
CONFIG_ATH_11AC_TXCOMPACT := y
endif
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_ATH_11AC_TXCOMPACT := n
endif
#Enable PCI specific APIS (dma, etc)
ifeq ($(CONFIG_ROME_IF),pci)
CONFIG_HIF_PCI := y
endif
#Enable USB specific APIS
ifeq ($(CONFIG_ROME_IF),usb)
CONFIG_HIF_USB := y
endif
#Enable SDIO specific APIS
ifeq ($(CONFIG_ROME_IF),sdio)
CONFIG_HIF_SDIO := y
CONFIG_TX_DESC_HI_PRIO_RESERVE := y
CONFIG_FEATURE_HL_GROUP_CREDIT_FLOW_CONTROL := y
CONFIG_TGT_NUM_MSDU_DESC := 0
endif
ifeq ($(CONFIG_ROME_IF),snoc)
CONFIG_HIF_SNOC:= y
endif
# enable/disable feature flags based upon mobile router profile
ifeq ($(CONFIG_MOBILE_ROUTER), y)
CONFIG_FEATURE_WLAN_MCC_TO_SCC_SWITCH := y
CONFIG_FEATURE_WLAN_AUTO_SHUTDOWN := y
CONFIG_FEATURE_WLAN_AP_AP_ACS_OPTIMIZE := y
CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y
CONFIG_MDM_PLATFORM := y
ifneq ($(CONFIG_ARCH_SDXPRAIRIE), y)
CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE := y
endif
CONFIG_FEATURE_AP_MCC_CH_AVOIDANCE := y
else
CONFIG_QCOM_ESE := y
CONFIG_FEATURE_WLAN_RMC := y
CONFIG_WLAN_OPEN_P2P_INTERFACE := y
CONFIG_WLAN_ENABLE_SOCIAL_CHANNELS_5G_ONLY := y
endif
#enable 4addr support for QCS40X
ifeq ($(CONFIG_ARCH_QCS40X), y)
CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y
endif
#Enable power management suspend/resume functionality to PCI
CONFIG_ATH_BUS_PM := y
#Enable FLOWMAC module support
CONFIG_ATH_SUPPORT_FLOWMAC_MODULE := n
#Enable spectral support
CONFIG_ATH_SUPPORT_SPECTRAL := n
#Define the legacy pktlog
ifeq ($(CONFIG_REMOVE_PKT_LOG), n)
ifeq ($(CONFIG_HELIUMPLUS), y)
CONFIG_PKTLOG_LEGACY := y
endif
ifeq ($(CONFIG_ROME_IF), sdio)
CONFIG_PKTLOG_LEGACY := y
endif
ifeq ($(CONFIG_ROME_IF), pci)
CONFIG_PKTLOG_LEGACY := y
endif
ifeq ($(CONFIG_ROME_IF), usb)
CONFIG_PKTLOG_LEGACY := y
endif
ifeq ($(CONFIG_ROME_IF), snoc)
CONFIG_PKTLOG_LEGACY := y
endif
endif
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_PKTLOG_LEGACY := n
endif
#Enable WDI Event support
ifeq ($(CONFIG_REMOVE_PKT_LOG), y)
CONFIG_WDI_EVENT_ENABLE := n
else
CONFIG_WDI_EVENT_ENABLE := y
endif
#Enable the type_specific_data in the ath_pktlog_arg
ifeq ($(CONFIG_REMOVE_PKT_LOG), n)
ifeq ($(CONFIG_LITHIUM), y)
CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y
endif
ifeq ($(CONFIG_HELIUMPLUS), y)
CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y
endif
endif
#Endianness selection
CONFIG_LITTLE_ENDIAN := y
#Enable TX reclaim support
CONFIG_TX_CREDIT_RECLAIM_SUPPORT := n
#Enable FTM support
CONFIG_QCA_WIFI_FTM := y
ifeq ($(CONFIG_QCA_WIFI_FTM), y)
ifeq ($(CONFIG_NL80211_TESTMODE), y)
QCA_WIFI_FTM_NL80211 :=y
else
QCA_WIFI_FTM_NL80211 :=n
endif
CONFIG_LINUX_QCMBR :=y
else
QCA_WIFI_FTM_NL80211 :=n
CONFIG_LINUX_QCMBR :=n
endif
#Enable Checksum Offload
CONFIG_CHECKSUM_OFFLOAD := y
#Enable GTK offload
CONFIG_GTK_OFFLOAD := y
#Enable EXT WOW
ifeq ($(CONFIG_HIF_PCI), y)
CONFIG_EXT_WOW := y
endif
#Set this to 1 to catch erroneous Target accesses during debug.
CONFIG_ATH_PCIE_ACCESS_DEBUG := n
#Enable IPA offload
ifeq ($(CONFIG_IPA), y)
CONFIG_IPA_OFFLOAD := y
endif
ifeq ($(CONFIG_IPA3), y)
CONFIG_IPA_OFFLOAD := y
endif
#Flag to enable SMMU S1 support
ifeq ($(CONFIG_ARCH_SDM845), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_SM8150), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
ifneq ($(CONFIG_LITHIUM), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
endif
ifeq ($(CONFIG_ARCH_SDMMAGPIE), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_LITO), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_ATOLL), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_TRINKET), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_KONA), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_SM6150), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_BENGAL), y)
ifeq ($(CONFIG_IPA_OFFLOAD), y)
CONFIG_ENABLE_SMMU_S1_TRANSLATION := y
endif
endif
ifeq ($(CONFIG_ARCH_SDX20), y)
ifeq ($(CONFIG_QCA_WIFI_SDIO), y)
ifeq ($(CONFIG_WCNSS_SKB_PRE_ALLOC), y)
CONFIG_FEATURE_SKB_PRE_ALLOC := y
endif
endif
endif
#Enable Signed firmware support for split binary format
CONFIG_QCA_SIGNED_SPLIT_BINARY_SUPPORT := n
#Enable single firmware binary format
CONFIG_QCA_SINGLE_BINARY_SUPPORT := n
#Enable collecting target RAM dump after kernel panic
CONFIG_TARGET_RAMDUMP_AFTER_KERNEL_PANIC := y
#Flag to enable/disable secure firmware feature
CONFIG_FEATURE_SECURE_FIRMWARE := n
#Flag to enable Stats Ext implementation
CONFIG_FEATURE_STATS_EXT := y
#Flag to allocate memory dynamically for different buffers
CONFIG_WLAN_LOGGING_BUFFERS_DYNAMICALLY := n
CONFIG_WLAN_DFS_STATIC_MEM_ALLOC := y
#Flag to enable HTC credit history feature
CONFIG_FEATURE_HTC_CREDIT_HISTORY := y
#Flag to enable MTRACE feature
CONFIG_TRACE_RECORD_FEATURE := y
#Flag to enable p2p debug feature
CONFIG_WLAN_FEATURE_P2P_DEBUG := y
#Flag to enable roam debug log
CONFIG_FEATURE_ROAM_DEBUG := y
#Flag to enable DFS Master feature
CONFIG_WLAN_DFS_MASTER_ENABLE := y
#Flag to enable WEXT support for STA/AP/P2P interfaces
CONFIG_WLAN_WEXT_SUPPORT_ENABLE := y
#Flag to enable/disable MTRACE feature
CONFIG_ENABLE_MTRACE_LOG := y
#Flag to enable nud tracking feature
CONFIG_WLAN_NUD_TRACKING := y
#Flag to enable wbuff feature
CONFIG_WLAN_WBUFF := y
#Flag to enable set and get disable channel list feature
CONFIG_DISABLE_CHANNEL_LIST :=y
#Flag to enable beacon receive feature
CONFIG_WLAN_BCN_RECV_FEATURE := y
#Flag to enable LTE COEX feature
CONFIG_LTE_COEX := y
#Flag to enable/disable TARGET 11d scan
CONFIG_TARGET_11D_SCAN := y
#Flag to enable/disable Avoid acs freq feature
CONFIG_SAP_AVOID_ACS_FREQ_LIST := y
#Flag to enable HOST OPCLASS feature
CONFIG_HOST_OPCLASS := y
#Flag to enable Dynamic Voltage WDCVS (Config Voltage Mode)
CONFIG_WLAN_DYNAMIC_CVM := y
CONFIG_WIFI_POS_CONVERGED := y
ifneq ($(CONFIG_WIFI_POS_CONVERGED), y)
CONFIG_WIFI_POS_LEGACY := y
endif
CONFIG_CP_STATS := y
CONFIG_FEATURE_INTEROP_ISSUES_AP := y
CONFIG_FEATURE_WLAN_WAPI := y
CONFIG_AGEIE_ON_SCAN_RESULTS := y
ifneq ($(CONFIG_LITHIUM), y)
#Flag to enable FW log parsing support feature
CONFIG_FEATURE_FW_LOG_PARSING := y
endif
CONFIG_PTT_SOCK_SVC_ENABLE := y
CONFIG_SOFTAP_CHANNEL_RANGE := y
CONFIG_FEATURE_WLAN_SCAN_PNO := y
CONFIG_WLAN_FEATURE_PACKET_FILTERING := y
CONFIG_WLAN_NS_OFFLOAD := y
CONFIG_FEATURE_WLAN_RA_FILTERING:= y
CONFIG_FEATURE_WLAN_LPHB := y
CONFIG_QCA_SUPPORT_TX_THROTTLE := y
CONFIG_WMI_INTERFACE_EVENT_LOGGING := y
CONFIG_WLAN_FEATURE_LINK_LAYER_STATS := y
CONFIG_FEATURE_WLAN_EXTSCAN := n
CONFIG_WMI_BCN_OFFLOAD := y
CONFIG_160MHZ_SUPPORT := y
CONFIG_MCL := y
CONFIG_REG_CLIENT := y
CONFIG_WLAN_PMO_ENABLE := y
CONFIG_CONVERGED_P2P_ENABLE := y
CONFIG_WLAN_POLICY_MGR_ENABLE := y
CONFIG_FEATURE_BLACKLIST_MGR := y
CONFIG_SUPPORT_11AX := y
CONFIG_HDD_INIT_WITH_RTNL_LOCK := y
CONFIG_WLAN_CONV_SPECTRAL_ENABLE := y
CONFIG_WLAN_SPECTRAL_ENABLE := y
CONFIG_WMI_CMD_STRINGS := y
CONFIG_FEATURE_MONITOR_MODE_SUPPORT := y
CONFIG_WLAN_ALLOCATE_GLOBAL_BUFFERS_DYNAMICALLY := n
CONFIG_WLAN_FEATURE_TWT := y
CONFIG_FW_THERMAL_THROTTLE := y
ifeq (y,$(findstring y,$(CONFIG_LITHIUM) $(CONFIG_ICNSS)))
CONFIG_WLAN_FEATURE_BMI := n
else
CONFIG_WLAN_FEATURE_BMI := y
endif
#Flags to enable/disable vendor commands
CONFIG_FEATURE_RSSI_MONITOR := y
CONFIG_FEATURE_BSS_TRANSITION := y
CONFIG_FEATURE_STATION_INFO := y
CONFIG_FEATURE_TX_POWER := y
CONFIG_FEATURE_OTA_TEST := y
CONFIG_FEATURE_ACTIVE_TOS := y
CONFIG_FEATURE_SAR_LIMITS := y
CONFIG_FEATURE_CONCURRENCY_MATRIX := y
CONFIG_FEATURE_SAP_COND_CHAN_SWITCH := y
CONFIG_FEATURE_P2P_LISTEN_OFFLOAD := y
CONFIG_QCACLD_FEATURE_MPTA_HELPER := n
CONFIG_QCACLD_RX_DESC_MULTI_PAGE_ALLOC := y
#Flags to enable/disable WMI APIs
CONFIG_WMI_ROAM_SUPPORT := y
CONFIG_WMI_CONCURRENCY_SUPPORT := y
CONFIG_WMI_STA_SUPPORT := y
CONFIG_DP_TRACE := y
ifeq ($(CONFIG_HELIUMPLUS), y)
ifneq ($(CONFIG_FORCE_ALLOC_FROM_DMA_ZONE), y)
CONFIG_ENABLE_DEBUG_ADDRESS_MARKING := y
endif
CONFIG_RX_OL := y
endif
ifeq ($(CONFIG_SLUB_DEBUG_ON), y)
CONFIG_DSC_DEBUG := y
CONFIG_DESC_TIMESTAMP_DEBUG_INFO := y
CONFIG_FEATURE_UNIT_TEST_SUSPEND := y
CONFIG_LEAK_DETECTION := y
CONFIG_MAX_LOGS_PER_SEC := 500
CONFIG_SCHED_HISTORY_SIZE := 256
CONFIG_TALLOC_DEBUG := y
CONFIG_UNIT_TEST := y
CONFIG_RX_DESC_DEBUG_CHECK:= y
CONFIG_REGISTER_OP_DEBUG := y
CONFIG_ENABLE_QDF_PTR_HASH_DEBUG := y
endif
ifeq ($(CONFIG_UNIT_TEST), y)
CONFIG_DSC_TEST := y
CONFIG_QDF_TEST := y
CONFIG_FEATURE_WLM_STATS := y
endif
ifeq ($(CONFIG_LITHIUM), y)
ifeq ($(CONFIG_SLUB_DEBUG_ON), y)
CONFIG_WLAN_FEATURE_DP_EVENT_HISTORY := y
CONFIG_HIF_CE_DEBUG_DATA_BUF := y
CONFIG_WLAN_RECORD_RX_PADDR := y
endif
CONFIG_WLAN_SUPPORT_DATA_STALL := y
CONFIG_WLAN_DP_PER_RING_TYPE_CONFIG := y
CONFIG_WLAN_CE_INTERRUPT_THRESHOLD_CONFIG := y
#Enable WMI TX/RX over QMI
CONFIG_WMI_SEND_RECV_QMI := y
CONFIG_WLAN_DP_PENDING_MEM_FLUSH := y
endif
#Flag to enable hdd memory dump feature
CONFIG_FEATURE_MEMDUMP_ENABLE := y
#Flag to enable/disable WLAN D0-WOW
ifeq ($(CONFIG_PCI_MSM), y)
ifeq ($(CONFIG_HIF_PCI), y)
CONFIG_FEATURE_WLAN_D0WOW := y
endif
endif
ifeq ($(CONFIG_ARCH_MDM9607), y)
CONFIG_TUFELLO_DUAL_FW_SUPPORT := y
endif
ifeq ($(CONFIG_ARCH_MSM8996), y)
CONFIG_CHANNEL_HOPPING_ALL_BANDS := y
endif
ifeq ($(CONFIG_ARCH_SDXPRAIRIE), y)
ifneq ($(CONFIG_SLUB_DEBUG), y)
CONFIG_DP_TRACE := n
endif
CONFIG_DIRECT_BUF_RX_ENABLE := n
CONFIG_WMI_DBR_SUPPORT := n
endif
ifneq ($(CONFIG_HIF_USB), y)
CONFIG_WLAN_LOGGING_SOCK_SVC := y
endif
ifneq ($(TARGET_BUILD_VARIANT),user)
CONFIG_DESC_DUP_DETECT_DEBUG := y
CONFIG_DEBUG_RX_RING_BUFFER := y
endif
ifeq ($(CONFIG_CNSS), y)
ifeq ($(CONFIG_CNSS_SDIO), y)
CONFIG_PLD_SDIO_CNSS_FLAG := y
endif
ifeq ($(CONFIG_HIF_PCI), y)
CONFIG_PLD_PCIE_CNSS_FLAG := y
endif
endif
ifeq ($(CONFIG_CNSS2), y)
ifeq ($(CONFIG_HIF_PCI), y)
CONFIG_PLD_PCIE_CNSS_FLAG := y
CONFIG_PLD_PCIE_INIT_FLAG := y
endif
endif
ifeq ($(CONFIG_CNSS2), m)
ifeq ($(CONFIG_HIF_PCI), y)
CONFIG_PLD_PCIE_CNSS_FLAG := y
CONFIG_PLD_PCIE_INIT_FLAG := y
endif
endif
#Enable STATE MACHINE HISTORY
CONFIG_SM_ENG_HIST := n
#Enable OEM DATA feature
CONFIG_FEATURE_OEM_DATA := y
#Enable FW Offload
CONFIG_WLAN_FW_OFFLOAD := y
#Enable eLNA bypass feature
ifeq ($(CONFIG_WLAN_FW_OFFLOAD), y)
CONFIG_WLAN_FEATURE_ELNA := y
endif
ifeq (y,$(findstring y,$(CONFIG_ARCH_MSM) $(CONFIG_ARCH_QCOM)))
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH := y
endif
ifeq ($(CONFIG_CNSS_QCA6490), y)
#Enable 6 GHz Band
CONFIG_BAND_6GHZ := y
endif
ifeq ($(CONFIG_BAND_6GHZ), y)
CONFIG_6G_SCAN_CHAN_SORT_ALGO := y
endif
CONFIG_SAP_DHCP_FW_IND := y
#Enable support to get ANI level
CONFIG_ANI_LEVEL_REQUEST := y
Reference in New Issue View Git Blame Copy Permalink