lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a8e14fec16
android_kernel_xiaomi_sm8350/drivers/scsi
History
James Bottomley a8e14fec16 [SCSI] libsas: fix error handling 
The libsas error handler has two fairly fatal bugs

1. scsi_sas_task_done calls scsi_eh_finish_cmd() too early.  This
   happens if the task completes after it has been aborted but before
   the error handler starts up.  Because scsi_eh_finish_cmd()
   decrements host_failed and adds the task to the done list, the
   error handler start check (host_failed == host_busy) never passes
   and the eh never starts.

2. The multiple task completion paths sas_scsi_clear_queue_... all
   simply delete the task from the error queue.  This causes it to
   disappear into the ether, since a command must be placed on the
   done queue to be finished off by the error handler.  This behaviour
   causes the HBA to hang on pending commands.

Fix 1. by moving the SAS_TASK_STATE_ABORTED check to an exit clause at
the top of the routine and calling ->scsi_done() unconditionally (it
is a nop if the timer has fired).  This keeps the task in the error
handling queue until the eh starts.

Fix 2. by making sure every task goes through task complete followed
by scsi_eh_finish_cmd().

Tested this by firing resets across a disk running a hammer test (now
it actually survives without hanging the system)

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 16:57:14 -06:00
..
aacraid [SCSI] aacraid: informational sysfs value corrections 2008-02-11 10:20:54 -06:00
aic7xxx [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panic 2008-02-18 08:57:17 -06:00
aic7xxx_old
aic94xx [SCSI] aic94xx: fix REQ_TASK_ABORT and REQ_DEVICE_RESET 2008-02-18 08:57:15 -06:00
arcmsr [SCSI] arcmsr: fix message allocation 2008-02-22 09:08:13 -06:00
arm [SCSI] fas216: fix up the previous fas216 commit 2008-02-18 08:57:16 -06:00
dpt [SCSI] dpt: whitespace cleanup 2007-04-01 10:10:04 -05:00
ibmvscsi Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
libsas [SCSI] libsas: fix error handling 2008-02-22 16:57:14 -06:00
lpfc [SCSI] lpfc: make lpfc_disable_node() static 2008-02-22 09:08:12 -06:00
megaraid [SCSI] MegaRAID driver management char device moved to misc 2008-02-11 10:20:53 -06:00
pcmcia pcmcia: convert some internal-only ioaddr_t to unsigned int 2008-02-05 09:44:08 -08:00
qla2xxx [SCSI] qla2xxx: fix compile warning for printk format 2008-02-18 08:57:17 -06:00
qla4xxx [SCSI] qla4xxx: add async scan support 2008-02-07 18:02:35 -06:00
sym53c8xx_2 [SCSI] sym53c8xx: fix resid calculation 2008-02-07 18:02:34 -06:00
.gitignore [SCSI] 53c7xx: fix removal fallout 2008-01-11 18:22:30 -06:00
3w-9xxx.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
3w-9xxx.h [SCSI] 3w-9xxx: add support for 9690SA 2007-07-21 08:57:40 -05:00
3w-xxxx.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
3w-xxxx.h
53c700_d.h_shipped
53c700.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
53c700.h [SCSI] 53c700: m68k support for the 53c700 SCSI core 2007-06-17 16:15:56 -05:00
53c700.scr
a100u2w.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
a100u2w.h [SCSI] a100u2w: Convert into Linux style 2007-06-17 16:09:29 -05:00
a2091.c cleanup after APUS removal 2008-02-06 10:41:01 -08:00
a2091.h
a3000.c cleanup after APUS removal 2008-02-06 10:41:01 -08:00
a3000.h
a4000t.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
advansys.c [SCSI] advansys: fix overrun_buf aligned bug 2008-02-11 10:20:53 -06:00
aha152x.c [SCSI] aha152x: Use scsi_eh API for REQUEST_SENSE invocation 2008-01-11 18:22:34 -06:00
aha152x.h [SCSI] aha152x: fix debug mode symbol conflict 2007-08-04 09:11:06 -05:00
aha1542.c MAINTAINERS: remove Adam Fritzler, remove his email address in other sources 2008-02-03 16:36:24 +02:00
aha1542.h
aha1740.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
aha1740.h
aic7xxx_old.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
atari_dma_emul.c
atari_NCR5380.c [SCSI] atari_NCR5380, sun3_NCR5380: operator precedence fix 2008-01-11 18:28:57 -06:00
atari_scsi.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
atari_scsi.h m68k: Atari SCSI driver compile fixes 2007-05-04 17:59:05 -07:00
atp870u.c [SCSI] atp870u: convert to accessors and !use_sg cleanup 2008-01-11 18:22:38 -06:00
atp870u.h
BusLogic.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
BusLogic.h
bvme6000_scsi.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
ch.c [SCSI] ch: remove forward declarations 2008-01-25 09:22:12 -06:00
constants.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
dc395x.c [SCSI] dc395x: fix uninitialized var warning 2008-02-07 18:02:43 -06:00
dc395x.h
dmx3191d.c
dpt_i2o.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
dpti.h revert "dpt_i2o: convert to SCSI hotplug model" 2007-12-10 19:43:54 -08:00
dtc.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
dtc.h
eata_generic.h [SCSI] eata_pio: Remove FALSE/TRUE defines 2007-03-20 11:27:03 -05:00
eata_pio.c [SCSI] aic7xxx_old, eata_pio, ips, libsas: don't zero out sense_buffer in queuecommand 2008-01-23 11:29:26 -06:00
eata_pio.h
eata.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
esp_scsi.c esp_scsi: fix reset cleanup spinlock recursion 2007-12-10 19:43:55 -08:00
esp_scsi.h [SCSI] ESP: Revert ESP_BUS_TIMEOUT back down to 250 2007-07-31 10:51:25 -05:00
fd_mcs.c [SCSI] fd_mcs: convert to accessors and !use_sg cleanup 2008-01-11 18:22:35 -06:00
fdomain.c [SG] Update drivers to use sg helpers 2007-10-22 21:19:53 +02:00
fdomain.h
FlashPoint.c FlashPoint, use BIT instead of BITW 2007-10-19 11:53:42 -07:00
g_NCR5380_mmio.c
g_NCR5380.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
g_NCR5380.h
gdth_ioctl.h
gdth_proc.c [SCSI] gdth: don't call pci_free_consistent under spinlock 2008-02-18 09:02:25 -06:00
gdth_proc.h [SCSI] gdth: clean up host private data 2007-10-12 14:55:46 -04:00
gdth.c [SCSI] gdth: update deprecated pci_find_device 2008-02-13 09:33:10 -06:00
gdth.h [SCSI] gdth: !use_sg cleanup and use of scsi accessors 2007-10-12 14:56:13 -04:00
gvp11.c cleanup after APUS removal 2008-02-06 10:41:01 -08:00
gvp11.h
hosts.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
hptiop.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
hptiop.h [SCSI] hptiop: add more adapter models and other fixes 2008-01-11 18:28:06 -06:00
ibmmca.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
ide-scsi.c ide: add ide_read_[alt]status() inline helpers 2008-02-06 02:57:51 +01:00
imm.c [SCSI] imm: convert to accessors and !use_sg cleanup 2008-01-11 18:22:41 -06:00
imm.h
in2000.c [SCSI] in2000: convert to accessors and !use_sg cleanup 2008-01-11 18:22:36 -06:00
in2000.h
initio.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
initio.h [SCSI] initio: Convert into a real Linux driver and update to modern style 2007-05-22 11:08:56 -05:00
ipr.c drivers/scsi/: Spelling fixes 2008-02-03 17:28:22 +02:00
ipr.h [SCSI] ipr: Use PCI-E reset API for new ipr adapter 2007-05-08 11:54:40 -05:00
ips.c [SCSI] ips: fix data buffer accessors conversion bug 2008-02-19 10:49:27 -06:00
ips.h [SCSI] ips: trim trailing whitespace 2008-01-11 18:27:59 -06:00
iscsi_tcp.c [SCSI] iscsi: fix up iscsi printk prefix 2008-02-07 18:02:37 -06:00
iscsi_tcp.h [SCSI] iscsi_tcp: enable sg chaining 2008-01-11 18:28:48 -06:00
jazz_esp.c [SCSI] esp: use shost_priv 2007-05-31 17:30:04 -04:00
Kconfig [SCSI] gdth: update deprecated pci_find_device 2008-02-13 09:33:10 -06:00
lasi700.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
libiscsi.c [SCSI] libiscsi: fix session age rollover and remove cid encoding 2008-02-07 18:02:37 -06:00
libsrp.c [SCSI] implement scsi_data_buffer 2008-01-30 13:03:40 -06:00
mac53c94.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
mac53c94.h
mac_scsi.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
mac_scsi.h
Makefile [SCSI] ses: add new Enclosure ULD 2008-02-07 18:04:10 -06:00
megaraid.c [SCSI] megaraid: outb_p extermination 2008-02-18 08:57:16 -06:00
megaraid.h [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n 2007-05-08 11:15:08 -05:00
mesh.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
mesh.h
mvme16x_scsi.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
mvme147.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
mvme147.h
ncr53c8xx.c [SCSI] ncr53c8xx: fix sense_buffer access bug 2008-01-30 13:03:39 -06:00
ncr53c8xx.h [SCSI] ncr53c8xx: Call scsi_host_put in release 2007-10-12 14:51:18 -04:00
NCR53c406a.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
NCR5380.c [SCSI] NCR5380: fix section mismatch 2008-01-23 13:44:31 -06:00
NCR5380.h [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation 2007-10-12 14:55:07 -04:00
NCR_D700.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
NCR_D700.h
NCR_Q720.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
NCR_Q720.h
nsp32_debug.c
nsp32_io.h
nsp32.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
nsp32.h define global BIT macro 2007-10-19 11:53:42 -07:00
osst_detect.h
osst_options.h
osst.c [SCSI] osst: fix if (...) \n #if... cases missing semicolons when false 2007-10-27 14:31:06 -05:00
osst.h [SCSI] osst: Use mutex instead of semaphore 2007-10-12 14:50:55 -04:00
pas16.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
pas16.h
ppa.c [SCSI] ppa: convert to accessors and !use_sg cleanup 2008-01-11 18:22:41 -06:00
ppa.h
ps3rom.c [SCSI] ps3rom: sector size should be 512 bytes 2008-02-07 18:02:33 -06:00
ql1040_fw.h
ql1280_fw.h
ql12160_fw.h
qla1280.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
qla1280.h [SCSI] qla1280: eliminate wasted space in request and response ring 2007-10-23 12:35:35 -04:00
qlogicfas408.c [SG] Update drivers to use sg helpers 2007-10-22 21:19:53 +02:00
qlogicfas408.h
qlogicfas.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
qlogicpti_asm.c
qlogicpti.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
qlogicpti.h [SCSI] qlogicpti: Add a slave_configure method 2007-10-12 14:52:38 -04:00
raid_class.c
script_asm.pl
scsi_debug.c [SCSI] scsi_debug: disable clustering 2008-02-18 08:57:16 -06:00
scsi_debug.h
scsi_devinfo.c [SCSI] kernel-doc: use correct function name 2008-01-11 18:22:44 -06:00
scsi_error.c [SCSI] bidirectional command support 2008-01-30 13:03:41 -06:00
scsi_ioctl.c [SCSI] sd,sr: add early detection of medium not present 2008-01-11 18:22:50 -06:00
scsi_lib_dma.c [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA 2007-07-14 19:28:10 -05:00
scsi_lib.c [SCSI] fix BUG when sum(scatterlist) > bufflen 2008-02-07 18:02:44 -06:00
scsi_logging.h
scsi_module.c
scsi_netlink.c [NETNS]: Consolidate kernel netlink socket destruction. 2008-01-28 15:08:07 -08:00
scsi_priv.h [SCSI] don't use __GFP_DMA for sense buffers if not required 2008-01-23 11:37:44 -06:00
scsi_proc.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
scsi_sas_internal.h
scsi_scan.c [SCSI] add missing transport configure points for target and host 2008-01-23 11:29:17 -06:00
scsi_sysctl.c [SCSI] small cleanups 2007-07-18 11:16:32 -05:00
scsi_sysfs.c [SCSI] add missing transport configure points for target and host 2008-01-23 11:29:17 -06:00
scsi_tgt_if.c [SCSI] tgt: convert to use the data buffer accessors 2008-01-11 18:22:30 -06:00
scsi_tgt_lib.c drivers/scsi/: Spelling fixes 2008-02-03 17:28:22 +02:00
scsi_tgt_priv.h [SCSI] tgt: add I_T nexus support 2007-10-12 14:37:50 -04:00
scsi_transport_api.h
scsi_transport_fc_internal.h [SCSI] fc_transport: add target driver support 2007-10-12 14:46:58 -04:00
scsi_transport_fc.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
scsi_transport_iscsi.c [SCSI] iscsi transport: make 2 functions static 2008-02-22 09:08:12 -06:00
scsi_transport_sas.c drivers/scsi/: Spelling fixes 2008-02-03 17:28:22 +02:00
scsi_transport_spi.c [SCSI] scsi_transport_spi: convert to attribute groups 2008-01-23 11:29:18 -06:00
scsi_transport_srp_internal.h [SCSI] scsi_transport_srp: remove tgt dependencies 2007-10-12 14:38:09 -04:00
scsi_transport_srp.c [SCSI] docbook and kernel-doc updates 2008-01-11 18:22:45 -06:00
scsi_typedefs.h
scsi_wait_scan.c
scsi.c [SCSI] kernel-doc: fix scsi docbook 2008-02-07 18:02:42 -06:00
scsi.h
scsicam.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
sd.c [SCSI] sd: handle bad lba in sense information 2008-02-07 18:02:41 -06:00
ses.c [SCSI] ses: fix data corruption 2008-02-18 08:57:15 -06:00
sg.c Convert SG from nopage to fault. 2008-02-07 19:09:22 -08:00
sgiwd93.c [SCSI] sgiwd93: use cached memory access to make driver work on IP28 2008-01-30 13:03:39 -06:00
sim710.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-22 11:36:49 -07:00
sni_53c710.c [SCSI] sni_53c710: Cleanup 2007-07-14 19:12:15 -05:00
sr_ioctl.c [SCSI] sr: fix test unit ready responses 2008-02-07 18:02:44 -06:00
sr_vendor.c
sr.c [SCSI] sr: fix test unit ready responses 2008-02-07 18:02:44 -06:00
sr.h [SCSI] sr: fix test unit ready responses 2008-02-07 18:02:44 -06:00
st_options.h
st.c [SCSI] st: convert to unlocked_ioctl 2008-01-23 11:29:29 -06:00
st.h [SCSI] st: Use mutex instead of semaphore 2007-07-31 10:44:01 -05:00
stex.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
sun3_NCR5380.c [SCSI] atari_NCR5380, sun3_NCR5380: operator precedence fix 2008-01-11 18:28:57 -06:00
sun3_scsi_vme.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
sun3_scsi.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
sun3_scsi.h
sun3x_esp.c [SCSI] sun3x_esp: convert to esp_scsi 2008-02-07 18:02:33 -06:00
sun_esp.c [SCSI] esp: use shost_priv 2007-05-31 17:30:04 -04:00
sym53c416.c [SCSI] sym53c416: fix module parameters 2008-02-12 15:24:58 -06:00
sym53c416.h
t128.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
t128.h
tmscsim.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
tmscsim.h [SCSI] tmscsim: Further clean-up of the driver 2007-07-14 18:56:33 -05:00
u14-34f.c [SCSI] u14-34f: fix data direction bug 2008-02-07 18:02:44 -06:00
ultrastor.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
ultrastor.h
wd33c93.c [SCSI] wd33c93: convert to accessors and !use_sg cleanup 2008-01-11 18:22:35 -06:00
wd33c93.h Spelling fix: explicitly 2007-10-19 23:22:55 +02:00
wd7000.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
zalon.c
zorro7xx.c m68k: zorro7xx needs <asm/amigahw.h> 2007-11-29 09:24:52 -08:00