lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a9d6fd5e31
android_kernel_xiaomi_sm8350/drivers/net/wimax/i2400m/control.c
Cindy H Kao 0bcfc5ef01 wimax/i2400m: use -EL3RST to indicate device reset instead of -ERESTARTSYS 
When the i2400m device resets, the driver code will force some
functions to return a -ERESTARTSYS error code, which can is used by
the caller to determine which recovery actions to take.

However, in certain situations the only thing that can be done is to
bubble up said error code to user space, for handling.

However, -ERESTARSYS was a poor choice, as it is supposed to be used
by the kernel only.

As such, replace -ERESTARTSYS with -EL3RST; as well, in
i2400m_msg_to_dev(), when the device is in boot mode (following a
recent reset), return -EL3RST instead of -ENODEV (meaning the device
is in bootrom mode after a reset, not that the device was
disconnected, and thus, normal commands cannot be executed).

Signed-off-by: Cindy H Kao <cindy.h.kao@intel.com>
2009-06-11 03:30:26 -07:00

1413 lines
42 KiB
C
Raw Blame History

/*
* Intel Wireless WiMAX Connection 2400m
* Miscellaneous control functions for managing the device
*
*
* Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* Intel Corporation <linux-wimax@intel.com>
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
* - Initial implementation
*
* This is a collection of functions used to control the device (plus
* a few helpers).
*
* There are utilities for handling TLV buffers, hooks on the device's
* reports to act on device changes of state [i2400m_report_hook()],
* on acks to commands [i2400m_msg_ack_hook()], a helper for sending
* commands to the device and blocking until a reply arrives
* [i2400m_msg_to_dev()], a few high level commands for manipulating
* the device state, powersving mode and configuration plus the
* routines to setup the device once communication is stablished with
* it [i2400m_dev_initialize()].
*
* ROADMAP
*
* i2400m_dev_initalize() Called by i2400m_dev_start()
* i2400m_set_init_config()
* i2400m_cmd_get_state()
* i2400m_dev_shutdown() Called by i2400m_dev_stop()
* i2400m->bus_reset()
*
* i2400m_{cmd,get,set}_*()
* i2400m_msg_to_dev()
* i2400m_msg_check_status()
*
* i2400m_report_hook() Called on reception of an event
* i2400m_report_state_hook()
* i2400m_tlv_buffer_walk()
* i2400m_tlv_match()
* i2400m_report_tlv_system_state()
* i2400m_report_tlv_rf_switches_status()
* i2400m_report_tlv_media_status()
* i2400m_cmd_enter_powersave()
*
* i2400m_msg_ack_hook() Called on reception of a reply to a
* command, get or set
*/
#include <stdarg.h>
#include "i2400m.h"
#include <linux/kernel.h>
#include <linux/wimax/i2400m.h>
#define D_SUBMODULE control
#include "debug-levels.h"
/*
* Return if a TLV is of a give type and size
*
* @tlv_hdr: pointer to the TLV
* @tlv_type: type of the TLV we are looking for
* @tlv_size: expected size of the TLV we are looking for (if -1,
* don't check the size). This includes the header
* Returns: 0 if the TLV matches
* < 0 if it doesn't match at all
* > 0 total TLV + payload size, if the type matches, but not
* the size
*/
static
ssize_t i2400m_tlv_match(const struct i2400m_tlv_hdr *tlv,
enum i2400m_tlv tlv_type, ssize_t tlv_size)
{
if (le16_to_cpu(tlv->type) != tlv_type) /* Not our type? skip */
return -1;
if (tlv_size != -1
&& le16_to_cpu(tlv->length) + sizeof(*tlv) != tlv_size) {
size_t size = le16_to_cpu(tlv->length) + sizeof(*tlv);
printk(KERN_WARNING "W: tlv type 0x%x mismatched because of "
"size (got %zu vs %zu expected)\n",
tlv_type, size, tlv_size);
return size;
}
return 0;
}
/*
* Given a buffer of TLVs, iterate over them
*
* @i2400m: device instance
* @tlv_buf: pointer to the beginning of the TLV buffer
* @buf_size: buffer size in bytes
* @tlv_pos: seek position; this is assumed to be a pointer returned
* by i2400m_tlv_buffer_walk() [and thus, validated]. The
* TLV returned will be the one following this one.
*
* Usage:
*
* tlv_itr = NULL;
* while (tlv_itr = i2400m_tlv_buffer_walk(i2400m, buf, size, tlv_itr)) {
* ...
* // Do stuff with tlv_itr, DON'T MODIFY IT
* ...
* }
*/
static
const struct i2400m_tlv_hdr *i2400m_tlv_buffer_walk(
struct i2400m *i2400m,
const void *tlv_buf, size_t buf_size,
const struct i2400m_tlv_hdr *tlv_pos)
{
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_tlv_hdr *tlv_top = tlv_buf + buf_size;
size_t offset, length, avail_size;
unsigned type;
if (tlv_pos == NULL) /* Take the first one? */
tlv_pos = tlv_buf;
else /* Nope, the next one */
tlv_pos = (void *) tlv_pos
+ le16_to_cpu(tlv_pos->length) + sizeof(*tlv_pos);
if (tlv_pos == tlv_top) { /* buffer done */
tlv_pos = NULL;
goto error_beyond_end;
}
if (tlv_pos > tlv_top) {
tlv_pos = NULL;
WARN_ON(1);
goto error_beyond_end;
}
offset = (void *) tlv_pos - (void *) tlv_buf;
avail_size = buf_size - offset;
if (avail_size < sizeof(*tlv_pos)) {
dev_err(dev, "HW BUG? tlv_buf %p [%zu bytes], tlv @%zu: "
"short header\n", tlv_buf, buf_size, offset);
goto error_short_header;
}
type = le16_to_cpu(tlv_pos->type);
length = le16_to_cpu(tlv_pos->length);
if (avail_size < sizeof(*tlv_pos) + length) {
dev_err(dev, "HW BUG? tlv_buf %p [%zu bytes], "
"tlv type 0x%04x @%zu: "
"short data (%zu bytes vs %zu needed)\n",
tlv_buf, buf_size, type, offset, avail_size,
sizeof(*tlv_pos) + length);
goto error_short_header;
}
error_short_header:
error_beyond_end:
return tlv_pos;
}
/*
* Find a TLV in a buffer of sequential TLVs
*
* @i2400m: device descriptor
* @tlv_hdr: pointer to the first TLV in the sequence
* @size: size of the buffer in bytes; all TLVs are assumed to fit
* fully in the buffer (otherwise we'll complain).
* @tlv_type: type of the TLV we are looking for
* @tlv_size: expected size of the TLV we are looking for (if -1,
* don't check the size). This includes the header
*
* Returns: NULL if the TLV is not found, otherwise a pointer to
* it. If the sizes don't match, an error is printed and NULL
* returned.
*/
static
const struct i2400m_tlv_hdr *i2400m_tlv_find(
struct i2400m *i2400m,
const struct i2400m_tlv_hdr *tlv_hdr, size_t size,
enum i2400m_tlv tlv_type, ssize_t tlv_size)
{
ssize_t match;
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_tlv_hdr *tlv = NULL;
while ((tlv = i2400m_tlv_buffer_walk(i2400m, tlv_hdr, size, tlv))) {
match = i2400m_tlv_match(tlv, tlv_type, tlv_size);
if (match == 0) /* found it :) */
break;
if (match > 0)
dev_warn(dev, "TLV type 0x%04x found with size "
"mismatch (%zu vs %zu needed)\n",
tlv_type, match, tlv_size);
}
return tlv;
}
static const struct
{
char *msg;
int errno;
} ms_to_errno[I2400M_MS_MAX] = {
[I2400M_MS_DONE_OK] = { "", 0 },
[I2400M_MS_DONE_IN_PROGRESS] = { "", 0 },
[I2400M_MS_INVALID_OP] = { "invalid opcode", -ENOSYS },
[I2400M_MS_BAD_STATE] = { "invalid state", -EILSEQ },
[I2400M_MS_ILLEGAL_VALUE] = { "illegal value", -EINVAL },
[I2400M_MS_MISSING_PARAMS] = { "missing parameters", -ENOMSG },
[I2400M_MS_VERSION_ERROR] = { "bad version", -EIO },
[I2400M_MS_ACCESSIBILITY_ERROR] = { "accesibility error", -EIO },
[I2400M_MS_BUSY] = { "busy", -EBUSY },
[I2400M_MS_CORRUPTED_TLV] = { "corrupted TLV", -EILSEQ },
[I2400M_MS_UNINITIALIZED] = { "not unitialized", -EILSEQ },
[I2400M_MS_UNKNOWN_ERROR] = { "unknown error", -EIO },
[I2400M_MS_PRODUCTION_ERROR] = { "production error", -EIO },
[I2400M_MS_NO_RF] = { "no RF", -EIO },
[I2400M_MS_NOT_READY_FOR_POWERSAVE] =
{ "not ready for powersave", -EACCES },
[I2400M_MS_THERMAL_CRITICAL] = { "thermal critical", -EL3HLT },
};
/*
* i2400m_msg_check_status - translate a message's status code
*
* @i2400m: device descriptor
* @l3l4_hdr: message header
* @strbuf: buffer to place a formatted error message (unless NULL).
* @strbuf_size: max amount of available space; larger messages will
* be truncated.
*
* Returns: errno code corresponding to the status code in @l3l4_hdr
* and a message in @strbuf describing the error.
*/
int i2400m_msg_check_status(const struct i2400m_l3l4_hdr *l3l4_hdr,
char *strbuf, size_t strbuf_size)
{
int result;
enum i2400m_ms status = le16_to_cpu(l3l4_hdr->status);
const char *str;
if (status == 0)
return 0;
if (status > ARRAY_SIZE(ms_to_errno)) {
str = "unknown status code";
result = -EBADR;
} else {
str = ms_to_errno[status].msg;
result = ms_to_errno[status].errno;
}
if (strbuf)
snprintf(strbuf, strbuf_size, "%s (%d)", str, status);
return result;
}
/*
* Act on a TLV System State reported by the device
*
* @i2400m: device descriptor
* @ss: validated System State TLV
*/
static
void i2400m_report_tlv_system_state(struct i2400m *i2400m,
const struct i2400m_tlv_system_state *ss)
{
struct device *dev = i2400m_dev(i2400m);
struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
enum i2400m_system_state i2400m_state = le32_to_cpu(ss->state);
d_fnstart(3, dev, "(i2400m %p ss %p [%u])\n", i2400m, ss, i2400m_state);
if (i2400m->state != i2400m_state) {
i2400m->state = i2400m_state;
wake_up_all(&i2400m->state_wq);
}
switch (i2400m_state) {
case I2400M_SS_UNINITIALIZED:
case I2400M_SS_INIT:
case I2400M_SS_CONFIG:
case I2400M_SS_PRODUCTION:
wimax_state_change(wimax_dev, WIMAX_ST_UNINITIALIZED);
break;
case I2400M_SS_RF_OFF:
case I2400M_SS_RF_SHUTDOWN:
wimax_state_change(wimax_dev, WIMAX_ST_RADIO_OFF);
break;
case I2400M_SS_READY:
case I2400M_SS_STANDBY:
case I2400M_SS_SLEEPACTIVE:
wimax_state_change(wimax_dev, WIMAX_ST_READY);
break;
case I2400M_SS_CONNECTING:
case I2400M_SS_WIMAX_CONNECTED:
wimax_state_change(wimax_dev, WIMAX_ST_READY);
break;
case I2400M_SS_SCAN:
case I2400M_SS_OUT_OF_ZONE:
wimax_state_change(wimax_dev, WIMAX_ST_SCANNING);
break;
case I2400M_SS_IDLE:
d_printf(1, dev, "entering BS-negotiated idle mode\n");
case I2400M_SS_DISCONNECTING:
case I2400M_SS_DATA_PATH_CONNECTED:
wimax_state_change(wimax_dev, WIMAX_ST_CONNECTED);
break;
default:
/* Huh? just in case, shut it down */
dev_err(dev, "HW BUG? unknown state %u: shutting down\n",
i2400m_state);
i2400m->bus_reset(i2400m, I2400M_RT_WARM);
break;
};
d_fnend(3, dev, "(i2400m %p ss %p [%u]) = void\n",
i2400m, ss, i2400m_state);
}
/*
* Parse and act on a TLV Media Status sent by the device
*
* @i2400m: device descriptor
* @ms: validated Media Status TLV
*
* This will set the carrier up on down based on the device's link
* report. This is done asides of what the WiMAX stack does based on
* the device's state as sometimes we need to do a link-renew (the BS
* wants us to renew a DHCP lease, for example).
*
* In fact, doc says that everytime we get a link-up, we should do a
* DHCP negotiation...
*/
static
void i2400m_report_tlv_media_status(struct i2400m *i2400m,
const struct i2400m_tlv_media_status *ms)
{
struct device *dev = i2400m_dev(i2400m);
struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
struct net_device *net_dev = wimax_dev->net_dev;
enum i2400m_media_status status = le32_to_cpu(ms->media_status);
d_fnstart(3, dev, "(i2400m %p ms %p [%u])\n", i2400m, ms, status);
switch (status) {
case I2400M_MEDIA_STATUS_LINK_UP:
netif_carrier_on(net_dev);
break;
case I2400M_MEDIA_STATUS_LINK_DOWN:
netif_carrier_off(net_dev);
break;
/*
* This is the network telling us we need to retrain the DHCP
* lease -- so far, we are trusting the WiMAX Network Service
* in user space to pick this up and poke the DHCP client.
*/
case I2400M_MEDIA_STATUS_LINK_RENEW:
netif_carrier_on(net_dev);
break;
default:
dev_err(dev, "HW BUG? unknown media status %u\n",
status);
};
d_fnend(3, dev, "(i2400m %p ms %p [%u]) = void\n",
i2400m, ms, status);
}
/*
* Process a TLV from a 'state report'
*
* @i2400m: device descriptor
* @tlv: pointer to the TLV header; it has been already validated for
* consistent size.
* @tag: for error messages
*
* Act on the TLVs from a 'state report'.
*/
static
void i2400m_report_state_parse_tlv(struct i2400m *i2400m,
const struct i2400m_tlv_hdr *tlv,
const char *tag)
{
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_tlv_media_status *ms;
const struct i2400m_tlv_system_state *ss;
const struct i2400m_tlv_rf_switches_status *rfss;
if (0 == i2400m_tlv_match(tlv, I2400M_TLV_SYSTEM_STATE, sizeof(*ss))) {
ss = container_of(tlv, typeof(*ss), hdr);
d_printf(2, dev, "%s: system state TLV "
"found (0x%04x), state 0x%08x\n",
tag, I2400M_TLV_SYSTEM_STATE,
le32_to_cpu(ss->state));
i2400m_report_tlv_system_state(i2400m, ss);
}
if (0 == i2400m_tlv_match(tlv, I2400M_TLV_RF_STATUS, sizeof(*rfss))) {
rfss = container_of(tlv, typeof(*rfss), hdr);
d_printf(2, dev, "%s: RF status TLV "
"found (0x%04x), sw 0x%02x hw 0x%02x\n",
tag, I2400M_TLV_RF_STATUS,
le32_to_cpu(rfss->sw_rf_switch),
le32_to_cpu(rfss->hw_rf_switch));
i2400m_report_tlv_rf_switches_status(i2400m, rfss);
}
if (0 == i2400m_tlv_match(tlv, I2400M_TLV_MEDIA_STATUS, sizeof(*ms))) {
ms = container_of(tlv, typeof(*ms), hdr);
d_printf(2, dev, "%s: Media Status TLV: %u\n",
tag, le32_to_cpu(ms->media_status));
i2400m_report_tlv_media_status(i2400m, ms);
}
}
/*
* Parse a 'state report' and extract information
*
* @i2400m: device descriptor
* @l3l4_hdr: pointer to message; it has been already validated for
* consistent size.
* @size: size of the message (header + payload). The header length
* declaration is assumed to be congruent with @size (as in
* sizeof(*l3l4_hdr) + l3l4_hdr->length == size)
*
* Walk over the TLVs in a report state and act on them.
*/
static
void i2400m_report_state_hook(struct i2400m *i2400m,
const struct i2400m_l3l4_hdr *l3l4_hdr,
size_t size, const char *tag)
{
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_tlv_hdr *tlv;
size_t tlv_size = le16_to_cpu(l3l4_hdr->length);
d_fnstart(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s)\n",
i2400m, l3l4_hdr, size, tag);
tlv = NULL;
while ((tlv = i2400m_tlv_buffer_walk(i2400m, &l3l4_hdr->pl,
tlv_size, tlv)))
i2400m_report_state_parse_tlv(i2400m, tlv, tag);
d_fnend(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s) = void\n",
i2400m, l3l4_hdr, size, tag);
}
/*
* i2400m_report_hook - (maybe) act on a report
*
* @i2400m: device descriptor
* @l3l4_hdr: pointer to message; it has been already validated for
* consistent size.
* @size: size of the message (header + payload). The header length
* declaration is assumed to be congruent with @size (as in
* sizeof(*l3l4_hdr) + l3l4_hdr->length == size)
*
* Extract information we might need (like carrien on/off) from a
* device report.
*/
void i2400m_report_hook(struct i2400m *i2400m,
const struct i2400m_l3l4_hdr *l3l4_hdr, size_t size)
{
struct device *dev = i2400m_dev(i2400m);
unsigned msg_type;
d_fnstart(3, dev, "(i2400m %p l3l4_hdr %p size %zu)\n",
i2400m, l3l4_hdr, size);
/* Chew on the message, we might need some information from
* here */
msg_type = le16_to_cpu(l3l4_hdr->type);
switch (msg_type) {
case I2400M_MT_REPORT_STATE: /* carrier detection... */
i2400m_report_state_hook(i2400m,
l3l4_hdr, size, "REPORT STATE");
break;
/* If the device is ready for power save, then ask it to do
* it. */
case I2400M_MT_REPORT_POWERSAVE_READY: /* zzzzz */
if (l3l4_hdr->status == cpu_to_le16(I2400M_MS_DONE_OK)) {
if (i2400m_power_save_disabled)
d_printf(1, dev, "ready for powersave, "
"not requesting (disabled by module "
"parameter)\n");
else {
d_printf(1, dev, "ready for powersave, "
"requesting\n");
i2400m_cmd_enter_powersave(i2400m);
}
}
break;
};
d_fnend(3, dev, "(i2400m %p l3l4_hdr %p size %zu) = void\n",
i2400m, l3l4_hdr, size);
}
/*
* i2400m_msg_ack_hook - process cmd/set/get ack for internal status
*
* @i2400m: device descriptor
* @l3l4_hdr: pointer to message; it has been already validated for
* consistent size.
* @size: size of the message
*
* Extract information we might need from acks to commands and act on
* it. This is akin to i2400m_report_hook(). Note most of this
* processing should be done in the function that calls the
* command. This is here for some cases where it can't happen...
*/
void i2400m_msg_ack_hook(struct i2400m *i2400m,
const struct i2400m_l3l4_hdr *l3l4_hdr, size_t size)
{
int result;
struct device *dev = i2400m_dev(i2400m);
unsigned ack_type, ack_status;
char strerr[32];
/* Chew on the message, we might need some information from
* here */
ack_type = le16_to_cpu(l3l4_hdr->type);
ack_status = le16_to_cpu(l3l4_hdr->status);
switch (ack_type) {
case I2400M_MT_CMD_ENTER_POWERSAVE:
/* This is just left here for the sake of example, as
* the processing is done somewhere else. */
if (0) {
result = i2400m_msg_check_status(
l3l4_hdr, strerr, sizeof(strerr));
if (result >= 0)
d_printf(1, dev, "ready for power save: %zd\n",
size);
}
break;
};
return;
}
/*
* i2400m_msg_size_check() - verify message size and header are congruent
*
* It is ok if the total message size is larger than the expected
* size, as there can be padding.
*/
int i2400m_msg_size_check(struct i2400m *i2400m,
const struct i2400m_l3l4_hdr *l3l4_hdr,
size_t msg_size)
{
int result;
struct device *dev = i2400m_dev(i2400m);
size_t expected_size;
d_fnstart(4, dev, "(i2400m %p l3l4_hdr %p msg_size %zu)\n",
i2400m, l3l4_hdr, msg_size);
if (msg_size < sizeof(*l3l4_hdr)) {
dev_err(dev, "bad size for message header "
"(expected at least %zu, got %zu)\n",
(size_t) sizeof(*l3l4_hdr), msg_size);
result = -EIO;
goto error_hdr_size;
}
expected_size = le16_to_cpu(l3l4_hdr->length) + sizeof(*l3l4_hdr);
if (msg_size < expected_size) {
dev_err(dev, "bad size for message code 0x%04x (expected %zu, "
"got %zu)\n", le16_to_cpu(l3l4_hdr->type),
expected_size, msg_size);
result = -EIO;
} else
result = 0;
error_hdr_size:
d_fnend(4, dev,
"(i2400m %p l3l4_hdr %p msg_size %zu) = %d\n",
i2400m, l3l4_hdr, msg_size, result);
return result;
}
/*
* Cancel a wait for a command ACK
*
* @i2400m: device descriptor
* @code: [negative] errno code to cancel with (don't use
* -EINPROGRESS)
*
* If there is an ack already filled out, free it.
*/
void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code)
{
struct sk_buff *ack_skb;
unsigned long flags;
spin_lock_irqsave(&i2400m->rx_lock, flags);
ack_skb = i2400m->ack_skb;
if (ack_skb && !IS_ERR(ack_skb))
kfree_skb(ack_skb);
i2400m->ack_skb = ERR_PTR(code);
spin_unlock_irqrestore(&i2400m->rx_lock, flags);
}
/**
* i2400m_msg_to_dev - Send a control message to the device and get a response
*
* @i2400m: device descriptor
*
* @msg_skb: an skb *
*
* @buf: pointer to the buffer containing the message to be sent; it
* has to start with a &struct i2400M_l3l4_hdr and then
* followed by the payload. Once this function returns, the
* buffer can be reused.
*
* @buf_len: buffer size
*
* Returns:
*
* Pointer to skb containing the ack message. You need to check the
* pointer with IS_ERR(), as it might be an error code. Error codes
* could happen because:
*
* - the message wasn't formatted correctly
* - couldn't send the message
* - failed waiting for a response
* - the ack message wasn't formatted correctly
*
* The returned skb has been allocated with wimax_msg_to_user_alloc(),
* it contains the reponse in a netlink attribute and is ready to be
* passed up to user space with wimax_msg_to_user_send(). To access
* the payload and its length, use wimax_msg_{data,len}() on the skb.
*
* The skb has to be freed with kfree_skb() once done.
*
* Description:
*
* This function delivers a message/command to the device and waits
* for an ack to be received. The format is described in
* linux/wimax/i2400m.h. In summary, a command/get/set is followed by an
* ack.
*
* This function will not check the ack status, that's left up to the
* caller. Once done with the ack skb, it has to be kfree_skb()ed.
*
* The i2400m handles only one message at the same time, thus we need
* the mutex to exclude other players.
*
* We write the message and then wait for an answer to come back. The
* RX path intercepts control messages and handles them in
* i2400m_rx_ctl(). Reports (notifications) are (maybe) processed
* locally and then forwarded (as needed) to user space on the WiMAX
* stack message pipe. Acks are saved and passed back to us through an
* skb in i2400m->ack_skb which is ready to be given to generic
* netlink if need be.
*/
struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m,
const void *buf, size_t buf_len)
{
int result;
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_l3l4_hdr *msg_l3l4_hdr;
struct sk_buff *ack_skb;
const struct i2400m_l3l4_hdr *ack_l3l4_hdr;
size_t ack_len;
int ack_timeout;
unsigned msg_type;
unsigned long flags;
d_fnstart(3, dev, "(i2400m %p buf %p len %zu)\n",
i2400m, buf, buf_len);
rmb(); /* Make sure we see what i2400m_dev_reset_handle() */
if (i2400m->boot_mode)
return ERR_PTR(-EL3RST);
msg_l3l4_hdr = buf;
/* Check msg & payload consistency */
result = i2400m_msg_size_check(i2400m, msg_l3l4_hdr, buf_len);
if (result < 0)
goto error_bad_msg;
msg_type = le16_to_cpu(msg_l3l4_hdr->type);
d_printf(1, dev, "CMD/GET/SET 0x%04x %zu bytes\n",
msg_type, buf_len);
d_dump(2, dev, buf, buf_len);
/* Setup the completion, ack_skb ("we are waiting") and send
* the message to the device */
mutex_lock(&i2400m->msg_mutex);
spin_lock_irqsave(&i2400m->rx_lock, flags);
i2400m->ack_skb = ERR_PTR(-EINPROGRESS);
spin_unlock_irqrestore(&i2400m->rx_lock, flags);
init_completion(&i2400m->msg_completion);
result = i2400m_tx(i2400m, buf, buf_len, I2400M_PT_CTRL);
if (result < 0) {
dev_err(dev, "can't send message 0x%04x: %d\n",
le16_to_cpu(msg_l3l4_hdr->type), result);
goto error_tx;
}
/* Some commands take longer to execute because of crypto ops,
* so we give them some more leeway on timeout */
switch (msg_type) {
case I2400M_MT_GET_TLS_OPERATION_RESULT:
case I2400M_MT_CMD_SEND_EAP_RESPONSE:
ack_timeout = 5 * HZ;
break;
default:
ack_timeout = HZ;
};
if (unlikely(i2400m->trace_msg_from_user))
wimax_msg(&i2400m->wimax_dev, "echo", buf, buf_len, GFP_KERNEL);
/* The RX path in rx.c will put any response for this message
* in i2400m->ack_skb and wake us up. If we cancel the wait,
* we need to change the value of i2400m->ack_skb to something
* not -EINPROGRESS so RX knows there is no one waiting. */
result = wait_for_completion_interruptible_timeout(
&i2400m->msg_completion, ack_timeout);
if (result == 0) {
dev_err(dev, "timeout waiting for reply to message 0x%04x\n",
msg_type);
result = -ETIMEDOUT;
i2400m_msg_to_dev_cancel_wait(i2400m, result);
goto error_wait_for_completion;
} else if (result < 0) {
dev_err(dev, "error waiting for reply to message 0x%04x: %d\n",
msg_type, result);
i2400m_msg_to_dev_cancel_wait(i2400m, result);
goto error_wait_for_completion;
}
/* Pull out the ack data from i2400m->ack_skb -- see if it is
* an error and act accordingly */
spin_lock_irqsave(&i2400m->rx_lock, flags);
ack_skb = i2400m->ack_skb;
if (IS_ERR(ack_skb))
result = PTR_ERR(ack_skb);
else
result = 0;
i2400m->ack_skb = NULL;
spin_unlock_irqrestore(&i2400m->rx_lock, flags);
if (result < 0)
goto error_ack_status;
ack_l3l4_hdr = wimax_msg_data_len(ack_skb, &ack_len);
/* Check the ack and deliver it if it is ok */
if (unlikely(i2400m->trace_msg_from_user))
wimax_msg(&i2400m->wimax_dev, "echo",
ack_l3l4_hdr, ack_len, GFP_KERNEL);
result = i2400m_msg_size_check(i2400m, ack_l3l4_hdr, ack_len);
if (result < 0) {
dev_err(dev, "HW BUG? reply to message 0x%04x: %d\n",
msg_type, result);
goto error_bad_ack_len;
}
if (msg_type != le16_to_cpu(ack_l3l4_hdr->type)) {
dev_err(dev, "HW BUG? bad reply 0x%04x to message 0x%04x\n",
le16_to_cpu(ack_l3l4_hdr->type), msg_type);
result = -EIO;
goto error_bad_ack_type;
}
i2400m_msg_ack_hook(i2400m, ack_l3l4_hdr, ack_len);
mutex_unlock(&i2400m->msg_mutex);
d_fnend(3, dev, "(i2400m %p buf %p len %zu) = %p\n",
i2400m, buf, buf_len, ack_skb);
return ack_skb;
error_bad_ack_type:
error_bad_ack_len:
kfree_skb(ack_skb);
error_ack_status:
error_wait_for_completion:
error_tx:
mutex_unlock(&i2400m->msg_mutex);
error_bad_msg:
d_fnend(3, dev, "(i2400m %p buf %p len %zu) = %d\n",
i2400m, buf, buf_len, result);
return ERR_PTR(result);
}
/*
* Definitions for the Enter Power Save command
*
* The Enter Power Save command requests the device to go into power
* saving mode. The device will ack or nak the command depending on it
* being ready for it. If it acks, we tell the USB subsystem to
*
* As well, the device might request to go into power saving mode by
* sending a report (REPORT_POWERSAVE_READY), in which case, we issue
* this command. The hookups in the RX coder allow
*/
enum {
I2400M_WAKEUP_ENABLED = 0x01,
I2400M_WAKEUP_DISABLED = 0x02,
I2400M_TLV_TYPE_WAKEUP_MODE = 144,
};
struct i2400m_cmd_enter_power_save {
struct i2400m_l3l4_hdr hdr;
struct i2400m_tlv_hdr tlv;
__le32 val;
} __attribute__((packed));
/*
* Request entering power save
*
* This command is (mainly) executed when the device indicates that it
* is ready to go into powersave mode via a REPORT_POWERSAVE_READY.
*/
int i2400m_cmd_enter_powersave(struct i2400m *i2400m)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct i2400m_cmd_enter_power_save *cmd;
char strerr[32];
result = -ENOMEM;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_alloc;
cmd->hdr.type = cpu_to_le16(I2400M_MT_CMD_ENTER_POWERSAVE);
cmd->hdr.length = cpu_to_le16(sizeof(*cmd) - sizeof(cmd->hdr));
cmd->hdr.version = cpu_to_le16(I2400M_L3L4_VERSION);
cmd->tlv.type = cpu_to_le16(I2400M_TLV_TYPE_WAKEUP_MODE);
cmd->tlv.length = cpu_to_le16(sizeof(cmd->val));
cmd->val = cpu_to_le32(I2400M_WAKEUP_ENABLED);
ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
result = PTR_ERR(ack_skb);
if (IS_ERR(ack_skb)) {
dev_err(dev, "Failed to issue 'Enter power save' command: %d\n",
result);
goto error_msg_to_dev;
}
result = i2400m_msg_check_status(wimax_msg_data(ack_skb),
strerr, sizeof(strerr));
if (result == -EACCES)
d_printf(1, dev, "Cannot enter power save mode\n");
else if (result < 0)
dev_err(dev, "'Enter power save' (0x%04x) command failed: "
"%d - %s\n", I2400M_MT_CMD_ENTER_POWERSAVE,
result, strerr);
else
d_printf(1, dev, "device ready to power save\n");
kfree_skb(ack_skb);
error_msg_to_dev:
kfree(cmd);
error_alloc:
return result;
}
EXPORT_SYMBOL_GPL(i2400m_cmd_enter_powersave);
/*
* Definitions for getting device information
*/
enum {
I2400M_TLV_DETAILED_DEVICE_INFO = 140
};
/**
* i2400m_get_device_info - Query the device for detailed device information
*
* @i2400m: device descriptor
*
* Returns: an skb whose skb->data points to a 'struct
* i2400m_tlv_detailed_device_info'. When done, kfree_skb() it. The
* skb is *guaranteed* to contain the whole TLV data structure.
*
* On error, IS_ERR(skb) is true and ERR_PTR(skb) is the error
* code.
*/
struct sk_buff *i2400m_get_device_info(struct i2400m *i2400m)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct i2400m_l3l4_hdr *cmd;
const struct i2400m_l3l4_hdr *ack;
size_t ack_len;
const struct i2400m_tlv_hdr *tlv;
const struct i2400m_tlv_detailed_device_info *ddi;
char strerr[32];
ack_skb = ERR_PTR(-ENOMEM);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_alloc;
cmd->type = cpu_to_le16(I2400M_MT_GET_DEVICE_INFO);
cmd->length = 0;
cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
if (IS_ERR(ack_skb)) {
dev_err(dev, "Failed to issue 'get device info' command: %ld\n",
PTR_ERR(ack_skb));
goto error_msg_to_dev;
}
ack = wimax_msg_data_len(ack_skb, &ack_len);
result = i2400m_msg_check_status(ack, strerr, sizeof(strerr));
if (result < 0) {
dev_err(dev, "'get device info' (0x%04x) command failed: "
"%d - %s\n", I2400M_MT_GET_DEVICE_INFO, result,
strerr);
goto error_cmd_failed;
}
tlv = i2400m_tlv_find(i2400m, ack->pl, ack_len - sizeof(*ack),
I2400M_TLV_DETAILED_DEVICE_INFO, sizeof(*ddi));
if (tlv == NULL) {
dev_err(dev, "GET DEVICE INFO: "
"detailed device info TLV not found (0x%04x)\n",
I2400M_TLV_DETAILED_DEVICE_INFO);
result = -EIO;
goto error_no_tlv;
}
skb_pull(ack_skb, (void *) tlv - (void *) ack_skb->data);
error_msg_to_dev:
kfree(cmd);
error_alloc:
return ack_skb;
error_no_tlv:
error_cmd_failed:
kfree_skb(ack_skb);
kfree(cmd);
return ERR_PTR(result);
}
/* Firmware interface versions we support */
enum {
I2400M_HDIv_MAJOR = 9,
I2400M_HDIv_MINOR = 1,
I2400M_HDIv_MINOR_2 = 2,
};
/**
* i2400m_firmware_check - check firmware versions are compatible with
* the driver
*
* @i2400m: device descriptor
*
* Returns: 0 if ok, < 0 errno code an error and a message in the
* kernel log.
*
* Long function, but quite simple; first chunk launches the command
* and double checks the reply for the right TLV. Then we process the
* TLV (where the meat is).
*
* Once we process the TLV that gives us the firmware's interface
* version, we encode it and save it in i2400m->fw_version for future
* reference.
*/
int i2400m_firmware_check(struct i2400m *i2400m)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct i2400m_l3l4_hdr *cmd;
const struct i2400m_l3l4_hdr *ack;
size_t ack_len;
const struct i2400m_tlv_hdr *tlv;
const struct i2400m_tlv_l4_message_versions *l4mv;
char strerr[32];
unsigned major, minor, branch;
result = -ENOMEM;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_alloc;
cmd->type = cpu_to_le16(I2400M_MT_GET_LM_VERSION);
cmd->length = 0;
cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
if (IS_ERR(ack_skb)) {
result = PTR_ERR(ack_skb);
dev_err(dev, "Failed to issue 'get lm version' command: %-d\n",
result);
goto error_msg_to_dev;
}
ack = wimax_msg_data_len(ack_skb, &ack_len);
result = i2400m_msg_check_status(ack, strerr, sizeof(strerr));
if (result < 0) {
dev_err(dev, "'get lm version' (0x%04x) command failed: "
"%d - %s\n", I2400M_MT_GET_LM_VERSION, result,
strerr);
goto error_cmd_failed;
}
tlv = i2400m_tlv_find(i2400m, ack->pl, ack_len - sizeof(*ack),
I2400M_TLV_L4_MESSAGE_VERSIONS, sizeof(*l4mv));
if (tlv == NULL) {
dev_err(dev, "get lm version: TLV not found (0x%04x)\n",
I2400M_TLV_L4_MESSAGE_VERSIONS);
result = -EIO;
goto error_no_tlv;
}
l4mv = container_of(tlv, typeof(*l4mv), hdr);
major = le16_to_cpu(l4mv->major);
minor = le16_to_cpu(l4mv->minor);
branch = le16_to_cpu(l4mv->branch);
result = -EINVAL;
if (major != I2400M_HDIv_MAJOR) {
dev_err(dev, "unsupported major fw version "
"%u.%u.%u\n", major, minor, branch);
goto error_bad_major;
}
result = 0;
if (minor < I2400M_HDIv_MINOR_2 && minor > I2400M_HDIv_MINOR)
dev_warn(dev, "untested minor fw version %u.%u.%u\n",
major, minor, branch);
/* Yes, we ignore the branch -- we don't have to track it */
i2400m->fw_version = major << 16 | minor;
dev_info(dev, "firmware interface version %u.%u.%u\n",
major, minor, branch);
error_bad_major:
error_no_tlv:
error_cmd_failed:
kfree_skb(ack_skb);
error_msg_to_dev:
kfree(cmd);
error_alloc:
return result;
}
/*
* Send an DoExitIdle command to the device to ask it to go out of
* basestation-idle mode.
*
* @i2400m: device descriptor
*
* This starts a renegotiation with the basestation that might involve
* another crypto handshake with user space.
*
* Returns: 0 if ok, < 0 errno code on error.
*/
int i2400m_cmd_exit_idle(struct i2400m *i2400m)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct i2400m_l3l4_hdr *cmd;
char strerr[32];
result = -ENOMEM;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_alloc;
cmd->type = cpu_to_le16(I2400M_MT_CMD_EXIT_IDLE);
cmd->length = 0;
cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
result = PTR_ERR(ack_skb);
if (IS_ERR(ack_skb)) {
dev_err(dev, "Failed to issue 'exit idle' command: %d\n",
result);
goto error_msg_to_dev;
}
result = i2400m_msg_check_status(wimax_msg_data(ack_skb),
strerr, sizeof(strerr));
kfree_skb(ack_skb);
error_msg_to_dev:
kfree(cmd);
error_alloc:
return result;
}
/*
* Query the device for its state, update the WiMAX stack's idea of it
*
* @i2400m: device descriptor
*
* Returns: 0 if ok, < 0 errno code on error.
*
* Executes a 'Get State' command and parses the returned
* TLVs.
*
* Because this is almost identical to a 'Report State', we use
* i2400m_report_state_hook() to parse the answer. This will set the
* carrier state, as well as the RF Kill switches state.
*/
int i2400m_cmd_get_state(struct i2400m *i2400m)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct i2400m_l3l4_hdr *cmd;
const struct i2400m_l3l4_hdr *ack;
size_t ack_len;
char strerr[32];
result = -ENOMEM;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_alloc;
cmd->type = cpu_to_le16(I2400M_MT_GET_STATE);
cmd->length = 0;
cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
if (IS_ERR(ack_skb)) {
dev_err(dev, "Failed to issue 'get state' command: %ld\n",
PTR_ERR(ack_skb));
result = PTR_ERR(ack_skb);
goto error_msg_to_dev;
}
ack = wimax_msg_data_len(ack_skb, &ack_len);
result = i2400m_msg_check_status(ack, strerr, sizeof(strerr));
if (result < 0) {
dev_err(dev, "'get state' (0x%04x) command failed: "
"%d - %s\n", I2400M_MT_GET_STATE, result, strerr);
goto error_cmd_failed;
}
i2400m_report_state_hook(i2400m, ack, ack_len - sizeof(*ack),
"GET STATE");
result = 0;
kfree_skb(ack_skb);
error_cmd_failed:
error_msg_to_dev:
kfree(cmd);
error_alloc:
return result;
}
EXPORT_SYMBOL_GPL(i2400m_cmd_get_state);
/**
* Set basic configuration settings
*
* @i2400m: device descriptor
* @args: array of pointers to the TLV headers to send for
* configuration (each followed by its payload).
* TLV headers and payloads must be properly initialized, with the
* right endianess (LE).
* @arg_size: number of pointers in the @args array
*/
int i2400m_set_init_config(struct i2400m *i2400m,
const struct i2400m_tlv_hdr **arg, size_t args)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct i2400m_l3l4_hdr *cmd;
char strerr[32];
unsigned argc, argsize, tlv_size;
const struct i2400m_tlv_hdr *tlv_hdr;
void *buf, *itr;
d_fnstart(3, dev, "(i2400m %p arg %p args %zu)\n", i2400m, arg, args);
result = 0;
if (args == 0)
goto none;
/* Compute the size of all the TLVs, so we can alloc a
* contiguous command block to copy them. */
argsize = 0;
for (argc = 0; argc < args; argc++) {
tlv_hdr = arg[argc];
argsize += sizeof(*tlv_hdr) + le16_to_cpu(tlv_hdr->length);
}
WARN_ON(argc >= 9); /* As per hw spec */
/* Alloc the space for the command and TLVs*/
result = -ENOMEM;
buf = kzalloc(sizeof(*cmd) + argsize, GFP_KERNEL);
if (buf == NULL)
goto error_alloc;
cmd = buf;
cmd->type = cpu_to_le16(I2400M_MT_SET_INIT_CONFIG);
cmd->length = cpu_to_le16(argsize);
cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
/* Copy the TLVs */
itr = buf + sizeof(*cmd);
for (argc = 0; argc < args; argc++) {
tlv_hdr = arg[argc];
tlv_size = sizeof(*tlv_hdr) + le16_to_cpu(tlv_hdr->length);
memcpy(itr, tlv_hdr, tlv_size);
itr += tlv_size;
}
/* Send the message! */
ack_skb = i2400m_msg_to_dev(i2400m, buf, sizeof(*cmd) + argsize);
result = PTR_ERR(ack_skb);
if (IS_ERR(ack_skb)) {
dev_err(dev, "Failed to issue 'init config' command: %d\n",
result);
goto error_msg_to_dev;
}
result = i2400m_msg_check_status(wimax_msg_data(ack_skb),
strerr, sizeof(strerr));
if (result < 0)
dev_err(dev, "'init config' (0x%04x) command failed: %d - %s\n",
I2400M_MT_SET_INIT_CONFIG, result, strerr);
kfree_skb(ack_skb);
error_msg_to_dev:
kfree(buf);
error_alloc:
none:
d_fnend(3, dev, "(i2400m %p arg %p args %zu) = %d\n",
i2400m, arg, args, result);
return result;
}
EXPORT_SYMBOL_GPL(i2400m_set_init_config);
/**
* i2400m_set_idle_timeout - Set the device's idle mode timeout
*
* @i2400m: i2400m device descriptor
*
* @msecs: milliseconds for the timeout to enter idle mode. Between
* 100 to 300000 (5m); 0 to disable. In increments of 100.
*
* After this @msecs of the link being idle (no data being sent or
* received), the device will negotiate with the basestation entering
* idle mode for saving power. The connection is maintained, but
* getting out of it (done in tx.c) will require some negotiation,
* possible crypto re-handshake and a possible DHCP re-lease.
*
* Only available if fw_version >= 0x00090002.
*
* Returns: 0 if ok, < 0 errno code on error.
*/
int i2400m_set_idle_timeout(struct i2400m *i2400m, unsigned msecs)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *ack_skb;
struct {
struct i2400m_l3l4_hdr hdr;
struct i2400m_tlv_config_idle_timeout cit;
} *cmd;
const struct i2400m_l3l4_hdr *ack;
size_t ack_len;
char strerr[32];
result = -ENOSYS;
if (i2400m_le_v1_3(i2400m))
goto error_alloc;
result = -ENOMEM;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_alloc;
cmd->hdr.type = cpu_to_le16(I2400M_MT_GET_STATE);
cmd->hdr.length = cpu_to_le16(sizeof(*cmd) - sizeof(cmd->hdr));
cmd->hdr.version = cpu_to_le16(I2400M_L3L4_VERSION);
cmd->cit.hdr.type =
cpu_to_le16(I2400M_TLV_CONFIG_IDLE_TIMEOUT);
cmd->cit.hdr.length = cpu_to_le16(sizeof(cmd->cit.timeout));
cmd->cit.timeout = cpu_to_le32(msecs);
ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
if (IS_ERR(ack_skb)) {
dev_err(dev, "Failed to issue 'set idle timeout' command: "
"%ld\n", PTR_ERR(ack_skb));
result = PTR_ERR(ack_skb);
goto error_msg_to_dev;
}
ack = wimax_msg_data_len(ack_skb, &ack_len);
result = i2400m_msg_check_status(ack, strerr, sizeof(strerr));
if (result < 0) {
dev_err(dev, "'set idle timeout' (0x%04x) command failed: "
"%d - %s\n", I2400M_MT_GET_STATE, result, strerr);
goto error_cmd_failed;
}
result = 0;
kfree_skb(ack_skb);
error_cmd_failed:
error_msg_to_dev:
kfree(cmd);
error_alloc:
return result;
}
/**
* i2400m_dev_initialize - Initialize the device once communications are ready
*
* @i2400m: device descriptor
*
* Returns: 0 if ok, < 0 errno code on error.
*
* Configures the device to work the way we like it.
*
* At the point of this call, the device is registered with the WiMAX
* and netdev stacks, firmware is uploaded and we can talk to the
* device normally.
*/
int i2400m_dev_initialize(struct i2400m *i2400m)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct i2400m_tlv_config_idle_parameters idle_params;
struct i2400m_tlv_config_idle_timeout idle_timeout;
struct i2400m_tlv_config_d2h_data_format df;
struct i2400m_tlv_config_dl_host_reorder dlhr;
const struct i2400m_tlv_hdr *args[9];
unsigned argc = 0;
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
/* Disable idle mode? (enabled by default) */
if (i2400m_idle_mode_disabled) {
if (i2400m_le_v1_3(i2400m)) {
idle_params.hdr.type =
cpu_to_le16(I2400M_TLV_CONFIG_IDLE_PARAMETERS);
idle_params.hdr.length = cpu_to_le16(
sizeof(idle_params) - sizeof(idle_params.hdr));
idle_params.idle_timeout = 0;
idle_params.idle_paging_interval = 0;
args[argc++] = &idle_params.hdr;
} else {
idle_timeout.hdr.type =
cpu_to_le16(I2400M_TLV_CONFIG_IDLE_TIMEOUT);
idle_timeout.hdr.length = cpu_to_le16(
sizeof(idle_timeout) - sizeof(idle_timeout.hdr));
idle_timeout.timeout = 0;
args[argc++] = &idle_timeout.hdr;
}
}
if (i2400m_ge_v1_4(i2400m)) {
/* Enable extended RX data format? */
df.hdr.type =
cpu_to_le16(I2400M_TLV_CONFIG_D2H_DATA_FORMAT);
df.hdr.length = cpu_to_le16(
sizeof(df) - sizeof(df.hdr));
df.format = 1;
args[argc++] = &df.hdr;
/* Enable RX data reordering?
* (switch flipped in rx.c:i2400m_rx_setup() after fw upload) */
if (i2400m->rx_reorder) {
dlhr.hdr.type =
cpu_to_le16(I2400M_TLV_CONFIG_DL_HOST_REORDER);
dlhr.hdr.length = cpu_to_le16(
sizeof(dlhr) - sizeof(dlhr.hdr));
dlhr.reorder = 1;
args[argc++] = &dlhr.hdr;
}
}
result = i2400m_set_init_config(i2400m, args, argc);
if (result < 0)
goto error;
/*
* Update state: Here it just calls a get state; parsing the
* result (System State TLV and RF Status TLV [done in the rx
* path hooks]) will set the hardware and software RF-Kill
* status.
*/
result = i2400m_cmd_get_state(i2400m);
error:
if (result < 0)
dev_err(dev, "failed to initialize the device: %d\n", result);
d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
return result;
}
/**
* i2400m_dev_shutdown - Shutdown a running device
*
* @i2400m: device descriptor
*
* Release resources acquired during the running of the device; in
* theory, should also tell the device to go to sleep, switch off the
* radio, all that, but at this point, in most cases (driver
* disconnection, reset handling) we can't even talk to the device.
*/
void i2400m_dev_shutdown(struct i2400m *i2400m)
{
struct device *dev = i2400m_dev(i2400m);
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
return;
}
Reference in New Issue View Git Blame Copy Permalink