android_kernel_xiaomi_sm8350/arch/ppc64/kernel/pSeries_iommu.c
Paul Mackerras 1635317fac [PATCH] Separate pci bits out of struct device_node
This patch pulls the PCI-related junk out of struct device_node and
puts it in a separate structure, struct pci_dn.  The device_node now
just has a void * pointer in it, which points to a struct pci_dn for
nodes that represent PCI devices.  It could potentially be used in
future for device-specific data for other sorts of devices, such as
virtual I/O devices.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09 22:11:38 +10:00

582 lines
15 KiB
C

/*
* arch/ppc64/kernel/pSeries_iommu.c
*
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
*
* Rewrite, cleanup:
*
* Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
*
* Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/ppcdebug.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/plpar_wrappers.h>
#include <asm/pSeries_reconfig.h>
#include <asm/systemcfg.h>
#include <asm/firmware.h>
#include "pci.h"
#define DBG(fmt...)
extern int is_python(struct device_node *);
static void tce_build_pSeries(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction)
{
union tce_entry t;
union tce_entry *tp;
t.te_word = 0;
t.te_rdwr = 1; // Read allowed
if (direction != DMA_TO_DEVICE)
t.te_pciwr = 1;
tp = ((union tce_entry *)tbl->it_base) + index;
while (npages--) {
/* can't move this out since we might cross LMB boundary */
t.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
tp->te_word = t.te_word;
uaddr += PAGE_SIZE;
tp++;
}
}
static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
{
union tce_entry t;
union tce_entry *tp;
t.te_word = 0;
tp = ((union tce_entry *)tbl->it_base) + index;
while (npages--) {
tp->te_word = t.te_word;
tp++;
}
}
static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
long npages, unsigned long uaddr,
enum dma_data_direction direction)
{
u64 rc;
union tce_entry tce;
tce.te_word = 0;
tce.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
tce.te_rdwr = 1;
if (direction != DMA_TO_DEVICE)
tce.te_pciwr = 1;
while (npages--) {
rc = plpar_tce_put((u64)tbl->it_index,
(u64)tcenum << 12,
tce.te_word );
if (rc && printk_ratelimit()) {
printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%lx\n", (u64)tcenum);
printk("\ttce val = 0x%lx\n", tce.te_word );
show_stack(current, (unsigned long *)__get_SP());
}
tcenum++;
tce.te_rpn++;
}
}
static DEFINE_PER_CPU(void *, tce_page) = NULL;
static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
long npages, unsigned long uaddr,
enum dma_data_direction direction)
{
u64 rc;
union tce_entry tce, *tcep;
long l, limit;
if (npages == 1)
return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
direction);
tcep = __get_cpu_var(tce_page);
/* This is safe to do since interrupts are off when we're called
* from iommu_alloc{,_sg}()
*/
if (!tcep) {
tcep = (void *)__get_free_page(GFP_ATOMIC);
/* If allocation fails, fall back to the loop implementation */
if (!tcep)
return tce_build_pSeriesLP(tbl, tcenum, npages,
uaddr, direction);
__get_cpu_var(tce_page) = tcep;
}
tce.te_word = 0;
tce.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
tce.te_rdwr = 1;
if (direction != DMA_TO_DEVICE)
tce.te_pciwr = 1;
/* We can map max one pageful of TCEs at a time */
do {
/*
* Set up the page with TCE data, looping through and setting
* the values.
*/
limit = min_t(long, npages, PAGE_SIZE/sizeof(union tce_entry));
for (l = 0; l < limit; l++) {
tcep[l] = tce;
tce.te_rpn++;
}
rc = plpar_tce_put_indirect((u64)tbl->it_index,
(u64)tcenum << 12,
(u64)virt_to_abs(tcep),
limit);
npages -= limit;
tcenum += limit;
} while (npages > 0 && !rc);
if (rc && printk_ratelimit()) {
printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%lx\n", (u64)npages);
printk("\ttce[0] val = 0x%lx\n", tcep[0].te_word);
show_stack(current, (unsigned long *)__get_SP());
}
}
static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
{
u64 rc;
union tce_entry tce;
tce.te_word = 0;
while (npages--) {
rc = plpar_tce_put((u64)tbl->it_index,
(u64)tcenum << 12,
tce.te_word);
if (rc && printk_ratelimit()) {
printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%lx\n", (u64)tcenum);
printk("\ttce val = 0x%lx\n", tce.te_word );
show_stack(current, (unsigned long *)__get_SP());
}
tcenum++;
}
}
static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
{
u64 rc;
union tce_entry tce;
tce.te_word = 0;
rc = plpar_tce_stuff((u64)tbl->it_index,
(u64)tcenum << 12,
tce.te_word,
npages);
if (rc && printk_ratelimit()) {
printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
printk("\trc = %ld\n", rc);
printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%lx\n", (u64)npages);
printk("\ttce val = 0x%lx\n", tce.te_word );
show_stack(current, (unsigned long *)__get_SP());
}
}
static void iommu_table_setparms(struct pci_controller *phb,
struct device_node *dn,
struct iommu_table *tbl)
{
struct device_node *node;
unsigned long *basep;
unsigned int *sizep;
node = (struct device_node *)phb->arch_data;
basep = (unsigned long *)get_property(node, "linux,tce-base", NULL);
sizep = (unsigned int *)get_property(node, "linux,tce-size", NULL);
if (basep == NULL || sizep == NULL) {
printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has "
"missing tce entries !\n", dn->full_name);
return;
}
tbl->it_base = (unsigned long)__va(*basep);
memset((void *)tbl->it_base, 0, *sizep);
tbl->it_busno = phb->bus->number;
/* Units of tce entries */
tbl->it_offset = phb->dma_window_base_cur >> PAGE_SHIFT;
/* Test if we are going over 2GB of DMA space */
if (phb->dma_window_base_cur + phb->dma_window_size > (1L << 31))
panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
phb->dma_window_base_cur += phb->dma_window_size;
/* Set the tce table size - measured in entries */
tbl->it_size = phb->dma_window_size >> PAGE_SHIFT;
tbl->it_index = 0;
tbl->it_blocksize = 16;
tbl->it_type = TCE_PCI;
}
/*
* iommu_table_setparms_lpar
*
* Function: On pSeries LPAR systems, return TCE table info, given a pci bus.
*
* ToDo: properly interpret the ibm,dma-window property. The definition is:
* logical-bus-number (1 word)
* phys-address (#address-cells words)
* size (#cell-size words)
*
* Currently we hard code these sizes (more or less).
*/
static void iommu_table_setparms_lpar(struct pci_controller *phb,
struct device_node *dn,
struct iommu_table *tbl,
unsigned int *dma_window)
{
tbl->it_busno = PCI_DN(dn)->bussubno;
/* TODO: Parse field size properties properly. */
tbl->it_size = (((unsigned long)dma_window[4] << 32) |
(unsigned long)dma_window[5]) >> PAGE_SHIFT;
tbl->it_offset = (((unsigned long)dma_window[2] << 32) |
(unsigned long)dma_window[3]) >> PAGE_SHIFT;
tbl->it_base = 0;
tbl->it_index = dma_window[0];
tbl->it_blocksize = 16;
tbl->it_type = TCE_PCI;
}
static void iommu_bus_setup_pSeries(struct pci_bus *bus)
{
struct device_node *dn, *pdn;
struct pci_dn *pci;
struct iommu_table *tbl;
DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self);
/* For each (root) bus, we carve up the available DMA space in 256MB
* pieces. Since each piece is used by one (sub) bus/device, that would
* give a maximum of 7 devices per PHB. In most cases, this is plenty.
*
* The exception is on Python PHBs (pre-POWER4). Here we don't have EADS
* bridges below the PHB to allocate the sectioned tables to, so instead
* we allocate a 1GB table at the PHB level.
*/
dn = pci_bus_to_OF_node(bus);
pci = dn->data;
if (!bus->self) {
/* Root bus */
if (is_python(dn)) {
unsigned int *iohole;
DBG("Python root bus %s\n", bus->name);
iohole = (unsigned int *)get_property(dn, "io-hole", 0);
if (iohole) {
/* On first bus we need to leave room for the
* ISA address space. Just skip the first 256MB
* alltogether. This leaves 768MB for the window.
*/
DBG("PHB has io-hole, reserving 256MB\n");
pci->phb->dma_window_size = 3 << 28;
pci->phb->dma_window_base_cur = 1 << 28;
} else {
/* 1GB window by default */
pci->phb->dma_window_size = 1 << 30;
pci->phb->dma_window_base_cur = 0;
}
tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
iommu_table_setparms(pci->phb, dn, tbl);
pci->iommu_table = iommu_init_table(tbl);
} else {
/* Do a 128MB table at root. This is used for the IDE
* controller on some SMP-mode POWER4 machines. It
* doesn't hurt to allocate it on other machines
* -- it'll just be unused since new tables are
* allocated on the EADS level.
*
* Allocate at offset 128MB to avoid having to deal
* with ISA holes; 128MB table for IDE is plenty.
*/
pci->phb->dma_window_size = 1 << 27;
pci->phb->dma_window_base_cur = 1 << 27;
tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
iommu_table_setparms(pci->phb, dn, tbl);
pci->iommu_table = iommu_init_table(tbl);
/* All child buses have 256MB tables */
pci->phb->dma_window_size = 1 << 28;
}
} else {
pdn = pci_bus_to_OF_node(bus->parent);
if (!bus->parent->self && !is_python(pdn)) {
struct iommu_table *tbl;
/* First child and not python means this is the EADS
* level. Allocate new table for this slot with 256MB
* window.
*/
tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
iommu_table_setparms(pci->phb, dn, tbl);
pci->iommu_table = iommu_init_table(tbl);
} else {
/* Lower than first child or under python, use parent table */
pci->iommu_table = PCI_DN(pdn)->iommu_table;
}
}
}
static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus)
{
struct iommu_table *tbl;
struct device_node *dn, *pdn;
struct pci_dn *ppci;
unsigned int *dma_window = NULL;
DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self);
dn = pci_bus_to_OF_node(bus);
/* Find nearest ibm,dma-window, walking up the device tree */
for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL);
if (dma_window != NULL)
break;
}
if (dma_window == NULL) {
DBG("iommu_bus_setup_pSeriesLP: bus %s seems to have no ibm,dma-window property\n", dn->full_name);
return;
}
ppci = pdn->data;
if (!ppci->iommu_table) {
/* Bussubno hasn't been copied yet.
* Do it now because iommu_table_setparms_lpar needs it.
*/
ppci->bussubno = bus->number;
tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table),
GFP_KERNEL);
iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window);
ppci->iommu_table = iommu_init_table(tbl);
}
if (pdn != dn)
PCI_DN(dn)->iommu_table = ppci->iommu_table;
}
static void iommu_dev_setup_pSeries(struct pci_dev *dev)
{
struct device_node *dn, *mydn;
DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, dev->pretty_name);
/* Now copy the iommu_table ptr from the bus device down to the
* pci device_node. This means get_iommu_table() won't need to search
* up the device tree to find it.
*/
mydn = dn = pci_device_to_OF_node(dev);
while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL)
dn = dn->parent;
if (dn && dn->data) {
PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table;
} else {
DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name);
}
}
static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
{
int err = NOTIFY_OK;
struct device_node *np = node;
struct pci_dn *pci = np->data;
switch (action) {
case PSERIES_RECONFIG_REMOVE:
if (pci->iommu_table &&
get_property(np, "ibm,dma-window", NULL))
iommu_free_table(np);
break;
default:
err = NOTIFY_DONE;
break;
}
return err;
}
static struct notifier_block iommu_reconfig_nb = {
.notifier_call = iommu_reconfig_notifier,
};
static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
{
struct device_node *pdn, *dn;
struct iommu_table *tbl;
int *dma_window = NULL;
struct pci_dn *pci;
DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name);
/* dev setup for LPAR is a little tricky, since the device tree might
* contain the dma-window properties per-device and not neccesarily
* for the bus. So we need to search upwards in the tree until we
* either hit a dma-window property, OR find a parent with a table
* already allocated.
*/
dn = pci_device_to_OF_node(dev);
for (pdn = dn; pdn && pdn->data && !PCI_DN(pdn)->iommu_table;
pdn = pdn->parent) {
dma_window = (unsigned int *)
get_property(pdn, "ibm,dma-window", NULL);
if (dma_window)
break;
}
/* Check for parent == NULL so we don't try to setup the empty EADS
* slots on POWER4 machines.
*/
if (dma_window == NULL || pdn->parent == NULL) {
/* Fall back to regular (non-LPAR) dev setup */
DBG("No dma window for device, falling back to regular setup\n");
iommu_dev_setup_pSeries(dev);
return;
} else {
DBG("Found DMA window, allocating table\n");
}
pci = pdn->data;
if (!pci->iommu_table) {
/* iommu_table_setparms_lpar needs bussubno. */
pci->bussubno = pci->phb->bus->number;
tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table),
GFP_KERNEL);
iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window);
pci->iommu_table = iommu_init_table(tbl);
}
if (pdn != dn)
PCI_DN(dn)->iommu_table = pci->iommu_table;
}
static void iommu_bus_setup_null(struct pci_bus *b) { }
static void iommu_dev_setup_null(struct pci_dev *d) { }
/* These are called very early. */
void iommu_init_early_pSeries(void)
{
if (of_chosen && get_property(of_chosen, "linux,iommu-off", NULL)) {
/* Direct I/O, IOMMU off */
ppc_md.iommu_dev_setup = iommu_dev_setup_null;
ppc_md.iommu_bus_setup = iommu_bus_setup_null;
pci_direct_iommu_init();
return;
}
if (systemcfg->platform & PLATFORM_LPAR) {
if (firmware_has_feature(FW_FEATURE_MULTITCE)) {
ppc_md.tce_build = tce_buildmulti_pSeriesLP;
ppc_md.tce_free = tce_freemulti_pSeriesLP;
} else {
ppc_md.tce_build = tce_build_pSeriesLP;
ppc_md.tce_free = tce_free_pSeriesLP;
}
ppc_md.iommu_bus_setup = iommu_bus_setup_pSeriesLP;
ppc_md.iommu_dev_setup = iommu_dev_setup_pSeriesLP;
} else {
ppc_md.tce_build = tce_build_pSeries;
ppc_md.tce_free = tce_free_pSeries;
ppc_md.iommu_bus_setup = iommu_bus_setup_pSeries;
ppc_md.iommu_dev_setup = iommu_dev_setup_pSeries;
}
pSeries_reconfig_notifier_register(&iommu_reconfig_nb);
pci_iommu_init();
}