android_kernel_xiaomi_sm8350/drivers/net/wireless/rt2x00/rt2x00reg.h
Ivo van Doorn fb55f4d1fa rt2x00: Fix TX status reporting
The tx_status enumeration was broken since the introduction
of rt61pci. That driver uses different values to report the
status of the tx action.
This would lead to frames that were reported as success but
actually failed to be send out, or frames that were neither
successfull or failure which were reported as failure.

Fix this by change the TX status reporting and more explicitely
check for failure or success. Note that a third possibility is
added "unknown". Not all hardware (USB) can report the actual
TX status, for rt61pci some frames will receive this status
because the TXdone handler is never called for those frames.
This unknown will now be handled as neither success or failure,
so we no longer increment the failure counter while this conclusion
could not be determined from the real status of the frame.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21 21:47:30 -04:00

213 lines
4.5 KiB
C

/*
Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00
Abstract: rt2x00 generic register information.
*/
#ifndef RT2X00REG_H
#define RT2X00REG_H
/*
* Antenna values
*/
enum antenna {
ANTENNA_SW_DIVERSITY = 0,
ANTENNA_A = 1,
ANTENNA_B = 2,
ANTENNA_HW_DIVERSITY = 3,
};
/*
* Led mode values.
*/
enum led_mode {
LED_MODE_DEFAULT = 0,
LED_MODE_TXRX_ACTIVITY = 1,
LED_MODE_SIGNAL_STRENGTH = 2,
LED_MODE_ASUS = 3,
LED_MODE_ALPHA = 4,
};
/*
* TSF sync values
*/
enum tsf_sync {
TSF_SYNC_NONE = 0,
TSF_SYNC_INFRA = 1,
TSF_SYNC_BEACON = 2,
};
/*
* Device states
*/
enum dev_state {
STATE_DEEP_SLEEP = 0,
STATE_SLEEP = 1,
STATE_STANDBY = 2,
STATE_AWAKE = 3,
/*
* Additional device states, these values are
* not strict since they are not directly passed
* into the device.
*/
STATE_RADIO_ON,
STATE_RADIO_OFF,
STATE_RADIO_RX_ON,
STATE_RADIO_RX_OFF,
STATE_RADIO_RX_ON_LINK,
STATE_RADIO_RX_OFF_LINK,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
};
/*
* IFS backoff values
*/
enum ifs {
IFS_BACKOFF = 0,
IFS_SIFS = 1,
IFS_NEW_BACKOFF = 2,
IFS_NONE = 3,
};
/*
* Cipher types for hardware encryption
*/
enum cipher {
CIPHER_NONE = 0,
CIPHER_WEP64 = 1,
CIPHER_WEP128 = 2,
CIPHER_TKIP = 3,
CIPHER_AES = 4,
/*
* The following fields were added by rt61pci and rt73usb.
*/
CIPHER_CKIP64 = 5,
CIPHER_CKIP128 = 6,
CIPHER_TKIP_NO_MIC = 7,
};
/*
* Register handlers.
* We store the position of a register field inside a field structure,
* This will simplify the process of setting and reading a certain field
* inside the register while making sure the process remains byte order safe.
*/
struct rt2x00_field8 {
u8 bit_offset;
u8 bit_mask;
};
struct rt2x00_field16 {
u16 bit_offset;
u16 bit_mask;
};
struct rt2x00_field32 {
u32 bit_offset;
u32 bit_mask;
};
/*
* Power of two check, this will check
* if the mask that has been given contains
* and contiguous set of bits.
*/
#define is_power_of_two(x) ( !((x) & ((x)-1)) )
#define low_bit_mask(x) ( ((x)-1) & ~(x) )
#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x))
#define FIELD8(__mask) \
({ \
BUILD_BUG_ON(!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (u8)(__mask)); \
(struct rt2x00_field8) { \
__ffs(__mask), (__mask) \
}; \
})
#define FIELD16(__mask) \
({ \
BUILD_BUG_ON(!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (u16)(__mask));\
(struct rt2x00_field16) { \
__ffs(__mask), (__mask) \
}; \
})
#define FIELD32(__mask) \
({ \
BUILD_BUG_ON(!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (u32)(__mask));\
(struct rt2x00_field32) { \
__ffs(__mask), (__mask) \
}; \
})
static inline void rt2x00_set_field32(u32 *reg,
const struct rt2x00_field32 field,
const u32 value)
{
*reg &= ~(field.bit_mask);
*reg |= (value << field.bit_offset) & field.bit_mask;
}
static inline u32 rt2x00_get_field32(const u32 reg,
const struct rt2x00_field32 field)
{
return (reg & field.bit_mask) >> field.bit_offset;
}
static inline void rt2x00_set_field16(u16 *reg,
const struct rt2x00_field16 field,
const u16 value)
{
*reg &= ~(field.bit_mask);
*reg |= (value << field.bit_offset) & field.bit_mask;
}
static inline u16 rt2x00_get_field16(const u16 reg,
const struct rt2x00_field16 field)
{
return (reg & field.bit_mask) >> field.bit_offset;
}
static inline void rt2x00_set_field8(u8 *reg,
const struct rt2x00_field8 field,
const u8 value)
{
*reg &= ~(field.bit_mask);
*reg |= (value << field.bit_offset) & field.bit_mask;
}
static inline u8 rt2x00_get_field8(const u8 reg,
const struct rt2x00_field8 field)
{
return (reg & field.bit_mask) >> field.bit_offset;
}
#endif /* RT2X00REG_H */