c2df2efe96
Recently I found that that sparse by default doesn't endianness checks. So I changed my compilation habit to be make modules C=1 SUBDIRS=drivers/net/wireless/libertas CHECKFLAGS="-D__CHECK_ENDIAN__" so that I get the little-endian checks from sparse as well. That showed up a good bunch of problems. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1048 lines
25 KiB
C
1048 lines
25 KiB
C
/**
|
|
* This file contains functions used in USB interface module.
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/usb.h>
|
|
|
|
#define DRV_NAME "usb8xxx"
|
|
|
|
#include "host.h"
|
|
#include "decl.h"
|
|
#include "defs.h"
|
|
#include "dev.h"
|
|
#include "if_usb.h"
|
|
|
|
#define MESSAGE_HEADER_LEN 4
|
|
|
|
static char *lbs_fw_name = "usb8388.bin";
|
|
module_param_named(fw_name, lbs_fw_name, charp, 0644);
|
|
|
|
static struct usb_device_id if_usb_table[] = {
|
|
/* Enter the device signature inside */
|
|
{ USB_DEVICE(0x1286, 0x2001) },
|
|
{ USB_DEVICE(0x05a3, 0x8388) },
|
|
{} /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, if_usb_table);
|
|
|
|
static void if_usb_receive(struct urb *urb);
|
|
static void if_usb_receive_fwload(struct urb *urb);
|
|
static int if_usb_prog_firmware(struct usb_card_rec *cardp);
|
|
static int if_usb_host_to_card(struct lbs_private *priv,
|
|
u8 type,
|
|
u8 *payload,
|
|
u16 nb);
|
|
static int if_usb_get_int_status(struct lbs_private *priv, u8 *);
|
|
static int if_usb_read_event_cause(struct lbs_private *);
|
|
static int usb_tx_block(struct usb_card_rec *cardp, u8 *payload, u16 nb);
|
|
static void if_usb_free(struct usb_card_rec *cardp);
|
|
static int if_usb_submit_rx_urb(struct usb_card_rec *cardp);
|
|
static int if_usb_reset_device(struct usb_card_rec *cardp);
|
|
|
|
/**
|
|
* @brief call back function to handle the status of the URB
|
|
* @param urb pointer to urb structure
|
|
* @return N/A
|
|
*/
|
|
static void if_usb_write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct usb_card_rec *cardp = (struct usb_card_rec *) urb->context;
|
|
|
|
/* handle the transmission complete validations */
|
|
|
|
if (urb->status == 0) {
|
|
struct lbs_private *priv = cardp->priv;
|
|
|
|
/*
|
|
lbs_deb_usbd(&urb->dev->dev, "URB status is successfull\n");
|
|
lbs_deb_usbd(&urb->dev->dev, "Actual length transmitted %d\n",
|
|
urb->actual_length);
|
|
*/
|
|
|
|
/* Used for both firmware TX and regular TX. priv isn't
|
|
* valid at firmware load time.
|
|
*/
|
|
if (priv)
|
|
lbs_host_to_card_done(priv);
|
|
} else {
|
|
/* print the failure status number for debug */
|
|
lbs_pr_info("URB in failure status: %d\n", urb->status);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* @brief free tx/rx urb, skb and rx buffer
|
|
* @param cardp pointer usb_card_rec
|
|
* @return N/A
|
|
*/
|
|
static void if_usb_free(struct usb_card_rec *cardp)
|
|
{
|
|
lbs_deb_enter(LBS_DEB_USB);
|
|
|
|
/* Unlink tx & rx urb */
|
|
usb_kill_urb(cardp->tx_urb);
|
|
usb_kill_urb(cardp->rx_urb);
|
|
|
|
usb_free_urb(cardp->tx_urb);
|
|
cardp->tx_urb = NULL;
|
|
|
|
usb_free_urb(cardp->rx_urb);
|
|
cardp->rx_urb = NULL;
|
|
|
|
kfree(cardp->bulk_out_buffer);
|
|
cardp->bulk_out_buffer = NULL;
|
|
|
|
lbs_deb_leave(LBS_DEB_USB);
|
|
}
|
|
|
|
static void if_usb_set_boot2_ver(struct lbs_private *priv)
|
|
{
|
|
struct cmd_ds_set_boot2_ver b2_cmd;
|
|
int rsp_len = sizeof(b2_cmd);
|
|
|
|
b2_cmd.action = 0;
|
|
b2_cmd.version = priv->boot2_version;
|
|
|
|
if (lbs_cmd(priv, CMD_SET_BOOT2_VER, &b2_cmd, sizeof(b2_cmd),
|
|
&b2_cmd, &rsp_len)) {
|
|
lbs_deb_usb("Setting boot2 version failed\n");
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief sets the configuration values
|
|
* @param ifnum interface number
|
|
* @param id pointer to usb_device_id
|
|
* @return 0 on success, error code on failure
|
|
*/
|
|
static int if_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *udev;
|
|
struct usb_host_interface *iface_desc;
|
|
struct usb_endpoint_descriptor *endpoint;
|
|
struct lbs_private *priv;
|
|
struct usb_card_rec *cardp;
|
|
int i;
|
|
|
|
udev = interface_to_usbdev(intf);
|
|
|
|
cardp = kzalloc(sizeof(struct usb_card_rec), GFP_KERNEL);
|
|
if (!cardp) {
|
|
lbs_pr_err("Out of memory allocating private data.\n");
|
|
goto error;
|
|
}
|
|
|
|
cardp->udev = udev;
|
|
iface_desc = intf->cur_altsetting;
|
|
|
|
lbs_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X"
|
|
" bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n",
|
|
le16_to_cpu(udev->descriptor.bcdUSB),
|
|
udev->descriptor.bDeviceClass,
|
|
udev->descriptor.bDeviceSubClass,
|
|
udev->descriptor.bDeviceProtocol);
|
|
|
|
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
|
|
endpoint = &iface_desc->endpoint[i].desc;
|
|
if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
|
|
&& ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
|
|
USB_ENDPOINT_XFER_BULK)) {
|
|
/* we found a bulk in endpoint */
|
|
lbs_deb_usbd(&udev->dev, "Bulk in size is %d\n",
|
|
le16_to_cpu(endpoint->wMaxPacketSize));
|
|
if (!(cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
|
|
lbs_deb_usbd(&udev->dev,
|
|
"Rx URB allocation failed\n");
|
|
goto dealloc;
|
|
}
|
|
cardp->rx_urb_recall = 0;
|
|
|
|
cardp->bulk_in_size =
|
|
le16_to_cpu(endpoint->wMaxPacketSize);
|
|
cardp->bulk_in_endpointAddr =
|
|
(endpoint->
|
|
bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
|
|
lbs_deb_usbd(&udev->dev, "in_endpoint = %d\n",
|
|
endpoint->bEndpointAddress);
|
|
}
|
|
|
|
if (((endpoint->
|
|
bEndpointAddress & USB_ENDPOINT_DIR_MASK) ==
|
|
USB_DIR_OUT)
|
|
&& ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
|
|
USB_ENDPOINT_XFER_BULK)) {
|
|
/* We found bulk out endpoint */
|
|
if (!(cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
|
|
lbs_deb_usbd(&udev->dev,
|
|
"Tx URB allocation failed\n");
|
|
goto dealloc;
|
|
}
|
|
|
|
cardp->bulk_out_size =
|
|
le16_to_cpu(endpoint->wMaxPacketSize);
|
|
lbs_deb_usbd(&udev->dev,
|
|
"Bulk out size is %d\n",
|
|
le16_to_cpu(endpoint->wMaxPacketSize));
|
|
cardp->bulk_out_endpointAddr =
|
|
endpoint->bEndpointAddress;
|
|
lbs_deb_usbd(&udev->dev, "out_endpoint = %d\n",
|
|
endpoint->bEndpointAddress);
|
|
cardp->bulk_out_buffer =
|
|
kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE,
|
|
GFP_KERNEL);
|
|
|
|
if (!cardp->bulk_out_buffer) {
|
|
lbs_deb_usbd(&udev->dev,
|
|
"Could not allocate buffer\n");
|
|
goto dealloc;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Upload firmware */
|
|
cardp->rinfo.cardp = cardp;
|
|
if (if_usb_prog_firmware(cardp)) {
|
|
lbs_deb_usbd(&udev->dev, "FW upload failed");
|
|
goto err_prog_firmware;
|
|
}
|
|
|
|
if (!(priv = lbs_add_card(cardp, &udev->dev)))
|
|
goto err_prog_firmware;
|
|
|
|
cardp->priv = priv;
|
|
|
|
if (lbs_add_mesh(priv, &udev->dev))
|
|
goto err_add_mesh;
|
|
|
|
cardp->eth_dev = priv->dev;
|
|
|
|
priv->hw_host_to_card = if_usb_host_to_card;
|
|
priv->hw_get_int_status = if_usb_get_int_status;
|
|
priv->hw_read_event_cause = if_usb_read_event_cause;
|
|
priv->boot2_version = udev->descriptor.bcdDevice;
|
|
|
|
/* Delay 200 ms to waiting for the FW ready */
|
|
if_usb_submit_rx_urb(cardp);
|
|
msleep_interruptible(200);
|
|
priv->adapter->fw_ready = 1;
|
|
|
|
if (lbs_start_card(priv))
|
|
goto err_start_card;
|
|
|
|
if_usb_set_boot2_ver(priv);
|
|
|
|
usb_get_dev(udev);
|
|
usb_set_intfdata(intf, cardp);
|
|
|
|
return 0;
|
|
|
|
err_start_card:
|
|
lbs_remove_mesh(priv);
|
|
err_add_mesh:
|
|
lbs_remove_card(priv);
|
|
err_prog_firmware:
|
|
if_usb_reset_device(cardp);
|
|
dealloc:
|
|
if_usb_free(cardp);
|
|
|
|
error:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* @brief free resource and cleanup
|
|
* @param intf USB interface structure
|
|
* @return N/A
|
|
*/
|
|
static void if_usb_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct usb_card_rec *cardp = usb_get_intfdata(intf);
|
|
struct lbs_private *priv = (struct lbs_private *) cardp->priv;
|
|
|
|
lbs_deb_enter(LBS_DEB_MAIN);
|
|
|
|
/* Update Surprise removed to TRUE */
|
|
cardp->surprise_removed = 1;
|
|
|
|
if (priv) {
|
|
struct lbs_adapter *adapter = priv->adapter;
|
|
|
|
adapter->surpriseremoved = 1;
|
|
lbs_stop_card(priv);
|
|
lbs_remove_mesh(priv);
|
|
lbs_remove_card(priv);
|
|
}
|
|
|
|
/* this is (apparently?) necessary for future usage of the device */
|
|
lbs_prepare_and_send_command(priv, CMD_802_11_RESET, CMD_ACT_HALT,
|
|
0, 0, NULL);
|
|
|
|
/* Unlink and free urb */
|
|
if_usb_free(cardp);
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
usb_put_dev(interface_to_usbdev(intf));
|
|
|
|
lbs_deb_leave(LBS_DEB_MAIN);
|
|
}
|
|
|
|
/**
|
|
* @brief This function download FW
|
|
* @param priv pointer to struct lbs_private
|
|
* @return 0
|
|
*/
|
|
static int if_prog_firmware(struct usb_card_rec *cardp)
|
|
{
|
|
struct FWData *fwdata;
|
|
struct fwheader *fwheader;
|
|
u8 *firmware = cardp->fw->data;
|
|
|
|
fwdata = kmalloc(sizeof(struct FWData), GFP_ATOMIC);
|
|
|
|
if (!fwdata)
|
|
return -1;
|
|
|
|
fwheader = &fwdata->fwheader;
|
|
|
|
if (!cardp->CRC_OK) {
|
|
cardp->totalbytes = cardp->fwlastblksent;
|
|
cardp->fwseqnum = cardp->lastseqnum - 1;
|
|
}
|
|
|
|
/*
|
|
lbs_deb_usbd(&cardp->udev->dev, "totalbytes = %d\n",
|
|
cardp->totalbytes);
|
|
*/
|
|
|
|
memcpy(fwheader, &firmware[cardp->totalbytes],
|
|
sizeof(struct fwheader));
|
|
|
|
cardp->fwlastblksent = cardp->totalbytes;
|
|
cardp->totalbytes += sizeof(struct fwheader);
|
|
|
|
/* lbs_deb_usbd(&cardp->udev->dev,"Copy Data\n"); */
|
|
memcpy(fwdata->data, &firmware[cardp->totalbytes],
|
|
le32_to_cpu(fwdata->fwheader.datalength));
|
|
|
|
/*
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"Data length = %d\n", le32_to_cpu(fwdata->fwheader.datalength));
|
|
*/
|
|
|
|
cardp->fwseqnum = cardp->fwseqnum + 1;
|
|
|
|
fwdata->seqnum = cpu_to_le32(cardp->fwseqnum);
|
|
cardp->lastseqnum = cardp->fwseqnum;
|
|
cardp->totalbytes += le32_to_cpu(fwdata->fwheader.datalength);
|
|
|
|
if (fwheader->dnldcmd == cpu_to_le32(FW_HAS_DATA_TO_RECV)) {
|
|
/*
|
|
lbs_deb_usbd(&cardp->udev->dev, "There are data to follow\n");
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"seqnum = %d totalbytes = %d\n", cardp->fwseqnum,
|
|
cardp->totalbytes);
|
|
*/
|
|
memcpy(cardp->bulk_out_buffer, fwheader, FW_DATA_XMIT_SIZE);
|
|
usb_tx_block(cardp, cardp->bulk_out_buffer, FW_DATA_XMIT_SIZE);
|
|
|
|
} else if (fwdata->fwheader.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) {
|
|
/*
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"Host has finished FW downloading\n");
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"Donwloading FW JUMP BLOCK\n");
|
|
*/
|
|
memcpy(cardp->bulk_out_buffer, fwheader, FW_DATA_XMIT_SIZE);
|
|
usb_tx_block(cardp, cardp->bulk_out_buffer, FW_DATA_XMIT_SIZE);
|
|
cardp->fwfinalblk = 1;
|
|
}
|
|
|
|
/*
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"The firmware download is done size is %d\n",
|
|
cardp->totalbytes);
|
|
*/
|
|
|
|
kfree(fwdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int if_usb_reset_device(struct usb_card_rec *cardp)
|
|
{
|
|
int ret;
|
|
struct lbs_private *priv = cardp->priv;
|
|
|
|
lbs_deb_enter(LBS_DEB_USB);
|
|
|
|
/* Try a USB port reset first, if that fails send the reset
|
|
* command to the firmware.
|
|
*/
|
|
ret = usb_reset_device(cardp->udev);
|
|
if (!ret && priv) {
|
|
msleep(10);
|
|
ret = lbs_reset_device(priv);
|
|
msleep(10);
|
|
}
|
|
|
|
lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* @brief This function transfer the data to the device.
|
|
* @param priv pointer to struct lbs_private
|
|
* @param payload pointer to payload data
|
|
* @param nb data length
|
|
* @return 0 or -1
|
|
*/
|
|
static int usb_tx_block(struct usb_card_rec *cardp, u8 * payload, u16 nb)
|
|
{
|
|
int ret = -1;
|
|
|
|
/* check if device is removed */
|
|
if (cardp->surprise_removed) {
|
|
lbs_deb_usbd(&cardp->udev->dev, "Device removed\n");
|
|
goto tx_ret;
|
|
}
|
|
|
|
usb_fill_bulk_urb(cardp->tx_urb, cardp->udev,
|
|
usb_sndbulkpipe(cardp->udev,
|
|
cardp->bulk_out_endpointAddr),
|
|
payload, nb, if_usb_write_bulk_callback, cardp);
|
|
|
|
cardp->tx_urb->transfer_flags |= URB_ZERO_PACKET;
|
|
|
|
if ((ret = usb_submit_urb(cardp->tx_urb, GFP_ATOMIC))) {
|
|
/* transfer failed */
|
|
lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed: %d\n", ret);
|
|
ret = -1;
|
|
} else {
|
|
/* lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb success\n"); */
|
|
ret = 0;
|
|
}
|
|
|
|
tx_ret:
|
|
return ret;
|
|
}
|
|
|
|
static int __if_usb_submit_rx_urb(struct usb_card_rec *cardp,
|
|
void (*callbackfn)(struct urb *urb))
|
|
{
|
|
struct sk_buff *skb;
|
|
struct read_cb_info *rinfo = &cardp->rinfo;
|
|
int ret = -1;
|
|
|
|
if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
|
|
lbs_pr_err("No free skb\n");
|
|
goto rx_ret;
|
|
}
|
|
|
|
rinfo->skb = skb;
|
|
|
|
/* Fill the receive configuration URB and initialise the Rx call back */
|
|
usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
|
|
usb_rcvbulkpipe(cardp->udev,
|
|
cardp->bulk_in_endpointAddr),
|
|
(void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
|
|
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
|
|
rinfo);
|
|
|
|
cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
|
|
|
|
/* lbs_deb_usbd(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb); */
|
|
if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) {
|
|
/* handle failure conditions */
|
|
lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret);
|
|
kfree_skb(skb);
|
|
rinfo->skb = NULL;
|
|
ret = -1;
|
|
} else {
|
|
/* lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB success\n"); */
|
|
ret = 0;
|
|
}
|
|
|
|
rx_ret:
|
|
return ret;
|
|
}
|
|
|
|
static int if_usb_submit_rx_urb_fwload(struct usb_card_rec *cardp)
|
|
{
|
|
return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload);
|
|
}
|
|
|
|
static int if_usb_submit_rx_urb(struct usb_card_rec *cardp)
|
|
{
|
|
return __if_usb_submit_rx_urb(cardp, &if_usb_receive);
|
|
}
|
|
|
|
static void if_usb_receive_fwload(struct urb *urb)
|
|
{
|
|
struct read_cb_info *rinfo = (struct read_cb_info *)urb->context;
|
|
struct sk_buff *skb = rinfo->skb;
|
|
struct usb_card_rec *cardp = (struct usb_card_rec *)rinfo->cardp;
|
|
struct fwsyncheader *syncfwheader;
|
|
struct bootcmdrespStr bootcmdresp;
|
|
|
|
if (urb->status) {
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"URB status is failed during fw load\n");
|
|
kfree_skb(skb);
|
|
return;
|
|
}
|
|
|
|
if (cardp->bootcmdresp == 0) {
|
|
memcpy (&bootcmdresp, skb->data + IPFIELD_ALIGN_OFFSET,
|
|
sizeof(bootcmdresp));
|
|
if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
|
|
kfree_skb(skb);
|
|
if_usb_submit_rx_urb_fwload(cardp);
|
|
cardp->bootcmdresp = 1;
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"Received valid boot command response\n");
|
|
return;
|
|
}
|
|
if (bootcmdresp.u32magicnumber != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) {
|
|
lbs_pr_info(
|
|
"boot cmd response wrong magic number (0x%x)\n",
|
|
le32_to_cpu(bootcmdresp.u32magicnumber));
|
|
} else if (bootcmdresp.u8cmd_tag != BOOT_CMD_FW_BY_USB) {
|
|
lbs_pr_info(
|
|
"boot cmd response cmd_tag error (%d)\n",
|
|
bootcmdresp.u8cmd_tag);
|
|
} else if (bootcmdresp.u8result != BOOT_CMD_RESP_OK) {
|
|
lbs_pr_info(
|
|
"boot cmd response result error (%d)\n",
|
|
bootcmdresp.u8result);
|
|
} else {
|
|
cardp->bootcmdresp = 1;
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"Received valid boot command response\n");
|
|
}
|
|
kfree_skb(skb);
|
|
if_usb_submit_rx_urb_fwload(cardp);
|
|
return;
|
|
}
|
|
|
|
syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC);
|
|
if (!syncfwheader) {
|
|
lbs_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n");
|
|
kfree_skb(skb);
|
|
return;
|
|
}
|
|
|
|
memcpy(syncfwheader, skb->data + IPFIELD_ALIGN_OFFSET,
|
|
sizeof(struct fwsyncheader));
|
|
|
|
if (!syncfwheader->cmd) {
|
|
/*
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"FW received Blk with correct CRC\n");
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"FW received Blk seqnum = %d\n",
|
|
syncfwheader->seqnum);
|
|
*/
|
|
cardp->CRC_OK = 1;
|
|
} else {
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"FW received Blk with CRC error\n");
|
|
cardp->CRC_OK = 0;
|
|
}
|
|
|
|
kfree_skb(skb);
|
|
|
|
if (cardp->fwfinalblk) {
|
|
cardp->fwdnldover = 1;
|
|
goto exit;
|
|
}
|
|
|
|
if_prog_firmware(cardp);
|
|
|
|
if_usb_submit_rx_urb_fwload(cardp);
|
|
exit:
|
|
kfree(syncfwheader);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
#define MRVDRV_MIN_PKT_LEN 30
|
|
|
|
static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb,
|
|
struct usb_card_rec *cardp,
|
|
struct lbs_private *priv)
|
|
{
|
|
if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE +
|
|
MESSAGE_HEADER_LEN || recvlength < MRVDRV_MIN_PKT_LEN) {
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"Packet length is Invalid\n");
|
|
kfree_skb(skb);
|
|
return;
|
|
}
|
|
|
|
skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
|
|
skb_put(skb, recvlength);
|
|
skb_pull(skb, MESSAGE_HEADER_LEN);
|
|
lbs_process_rxed_packet(priv, skb);
|
|
priv->upld_len = (recvlength - MESSAGE_HEADER_LEN);
|
|
}
|
|
|
|
static inline void process_cmdrequest(int recvlength, u8 *recvbuff,
|
|
struct sk_buff *skb,
|
|
struct usb_card_rec *cardp,
|
|
struct lbs_private *priv)
|
|
{
|
|
u8 *cmdbuf;
|
|
if (recvlength > MRVDRV_SIZE_OF_CMD_BUFFER) {
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"The receive buffer is too large\n");
|
|
kfree_skb(skb);
|
|
return;
|
|
}
|
|
|
|
if (!in_interrupt())
|
|
BUG();
|
|
|
|
spin_lock(&priv->adapter->driver_lock);
|
|
/* take care of cur_cmd = NULL case by reading the
|
|
* data to clear the interrupt */
|
|
if (!priv->adapter->cur_cmd) {
|
|
cmdbuf = priv->upld_buf;
|
|
priv->adapter->hisregcpy &= ~MRVDRV_CMD_UPLD_RDY;
|
|
} else
|
|
cmdbuf = priv->adapter->cur_cmd->bufvirtualaddr;
|
|
|
|
cardp->usb_int_cause |= MRVDRV_CMD_UPLD_RDY;
|
|
priv->upld_len = (recvlength - MESSAGE_HEADER_LEN);
|
|
memcpy(cmdbuf, recvbuff + MESSAGE_HEADER_LEN,
|
|
priv->upld_len);
|
|
|
|
kfree_skb(skb);
|
|
lbs_interrupt(priv->dev);
|
|
spin_unlock(&priv->adapter->driver_lock);
|
|
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"Wake up main thread to handle cmd response\n");
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* @brief This function reads of the packet into the upload buff,
|
|
* wake up the main thread and initialise the Rx callack.
|
|
*
|
|
* @param urb pointer to struct urb
|
|
* @return N/A
|
|
*/
|
|
static void if_usb_receive(struct urb *urb)
|
|
{
|
|
struct read_cb_info *rinfo = (struct read_cb_info *)urb->context;
|
|
struct sk_buff *skb = rinfo->skb;
|
|
struct usb_card_rec *cardp = (struct usb_card_rec *) rinfo->cardp;
|
|
struct lbs_private *priv = cardp->priv;
|
|
|
|
int recvlength = urb->actual_length;
|
|
u8 *recvbuff = NULL;
|
|
u32 recvtype = 0;
|
|
|
|
lbs_deb_enter(LBS_DEB_USB);
|
|
|
|
if (recvlength) {
|
|
__le32 tmp;
|
|
|
|
if (urb->status) {
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"URB status is failed\n");
|
|
kfree_skb(skb);
|
|
goto setup_for_next;
|
|
}
|
|
|
|
recvbuff = skb->data + IPFIELD_ALIGN_OFFSET;
|
|
memcpy(&tmp, recvbuff, sizeof(u32));
|
|
recvtype = le32_to_cpu(tmp);
|
|
lbs_deb_usbd(&cardp->udev->dev,
|
|
"Recv length = 0x%x, Recv type = 0x%X\n",
|
|
recvlength, recvtype);
|
|
} else if (urb->status) {
|
|
kfree_skb(skb);
|
|
goto rx_exit;
|
|
}
|
|
|
|
switch (recvtype) {
|
|
case CMD_TYPE_DATA:
|
|
process_cmdtypedata(recvlength, skb, cardp, priv);
|
|
break;
|
|
|
|
case CMD_TYPE_REQUEST:
|
|
process_cmdrequest(recvlength, recvbuff, skb, cardp, priv);
|
|
break;
|
|
|
|
case CMD_TYPE_INDICATION:
|
|
/* Event cause handling */
|
|
spin_lock(&priv->adapter->driver_lock);
|
|
cardp->usb_event_cause = le32_to_cpu(*(__le32 *) (recvbuff + MESSAGE_HEADER_LEN));
|
|
lbs_deb_usbd(&cardp->udev->dev,"**EVENT** 0x%X\n",
|
|
cardp->usb_event_cause);
|
|
if (cardp->usb_event_cause & 0xffff0000) {
|
|
lbs_send_tx_feedback(priv);
|
|
spin_unlock(&priv->adapter->driver_lock);
|
|
break;
|
|
}
|
|
cardp->usb_event_cause <<= 3;
|
|
cardp->usb_int_cause |= MRVDRV_CARDEVENT;
|
|
kfree_skb(skb);
|
|
lbs_interrupt(priv->dev);
|
|
spin_unlock(&priv->adapter->driver_lock);
|
|
goto rx_exit;
|
|
default:
|
|
lbs_deb_usbd(&cardp->udev->dev, "Unknown command type 0x%X\n",
|
|
recvtype);
|
|
kfree_skb(skb);
|
|
break;
|
|
}
|
|
|
|
setup_for_next:
|
|
if_usb_submit_rx_urb(cardp);
|
|
rx_exit:
|
|
lbs_deb_leave(LBS_DEB_USB);
|
|
}
|
|
|
|
/**
|
|
* @brief This function downloads data to FW
|
|
* @param priv pointer to struct lbs_private structure
|
|
* @param type type of data
|
|
* @param buf pointer to data buffer
|
|
* @param len number of bytes
|
|
* @return 0 or -1
|
|
*/
|
|
static int if_usb_host_to_card(struct lbs_private *priv,
|
|
u8 type,
|
|
u8 *payload,
|
|
u16 nb)
|
|
{
|
|
struct usb_card_rec *cardp = (struct usb_card_rec *)priv->card;
|
|
|
|
lbs_deb_usbd(&cardp->udev->dev,"*** type = %u\n", type);
|
|
lbs_deb_usbd(&cardp->udev->dev,"size after = %d\n", nb);
|
|
|
|
if (type == MVMS_CMD) {
|
|
__le32 tmp = cpu_to_le32(CMD_TYPE_REQUEST);
|
|
priv->dnld_sent = DNLD_CMD_SENT;
|
|
memcpy(cardp->bulk_out_buffer, (u8 *) & tmp,
|
|
MESSAGE_HEADER_LEN);
|
|
|
|
} else {
|
|
__le32 tmp = cpu_to_le32(CMD_TYPE_DATA);
|
|
priv->dnld_sent = DNLD_DATA_SENT;
|
|
memcpy(cardp->bulk_out_buffer, (u8 *) & tmp,
|
|
MESSAGE_HEADER_LEN);
|
|
}
|
|
|
|
memcpy((cardp->bulk_out_buffer + MESSAGE_HEADER_LEN), payload, nb);
|
|
|
|
return usb_tx_block(cardp, cardp->bulk_out_buffer,
|
|
nb + MESSAGE_HEADER_LEN);
|
|
}
|
|
|
|
/* called with adapter->driver_lock held */
|
|
static int if_usb_get_int_status(struct lbs_private *priv, u8 *ireg)
|
|
{
|
|
struct usb_card_rec *cardp = priv->card;
|
|
|
|
*ireg = cardp->usb_int_cause;
|
|
cardp->usb_int_cause = 0;
|
|
|
|
lbs_deb_usbd(&cardp->udev->dev,"Int cause is 0x%X\n", *ireg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int if_usb_read_event_cause(struct lbs_private *priv)
|
|
{
|
|
struct usb_card_rec *cardp = priv->card;
|
|
|
|
priv->adapter->eventcause = cardp->usb_event_cause;
|
|
/* Re-submit rx urb here to avoid event lost issue */
|
|
if_usb_submit_rx_urb(cardp);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief This function issues Boot command to the Boot2 code
|
|
* @param ivalue 1:Boot from FW by USB-Download
|
|
* 2:Boot from FW in EEPROM
|
|
* @return 0
|
|
*/
|
|
static int if_usb_issue_boot_command(struct usb_card_rec *cardp, int ivalue)
|
|
{
|
|
struct bootcmdstr sbootcmd;
|
|
int i;
|
|
|
|
/* Prepare command */
|
|
sbootcmd.u32magicnumber = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER);
|
|
sbootcmd.u8cmd_tag = ivalue;
|
|
for (i=0; i<11; i++)
|
|
sbootcmd.au8dumy[i]=0x00;
|
|
memcpy(cardp->bulk_out_buffer, &sbootcmd, sizeof(struct bootcmdstr));
|
|
|
|
/* Issue command */
|
|
usb_tx_block(cardp, cardp->bulk_out_buffer, sizeof(struct bootcmdstr));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief This function checks the validity of Boot2/FW image.
|
|
*
|
|
* @param data pointer to image
|
|
* len image length
|
|
* @return 0 or -1
|
|
*/
|
|
static int check_fwfile_format(u8 *data, u32 totlen)
|
|
{
|
|
u32 bincmd, exit;
|
|
u32 blksize, offset, len;
|
|
int ret;
|
|
|
|
ret = 1;
|
|
exit = len = 0;
|
|
|
|
do {
|
|
struct fwheader *fwh = (void *)data;
|
|
|
|
bincmd = le32_to_cpu(fwh->dnldcmd);
|
|
blksize = le32_to_cpu(fwh->datalength);
|
|
switch (bincmd) {
|
|
case FW_HAS_DATA_TO_RECV:
|
|
offset = sizeof(struct fwheader) + blksize;
|
|
data += offset;
|
|
len += offset;
|
|
if (len >= totlen)
|
|
exit = 1;
|
|
break;
|
|
case FW_HAS_LAST_BLOCK:
|
|
exit = 1;
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
exit = 1;
|
|
break;
|
|
}
|
|
} while (!exit);
|
|
|
|
if (ret)
|
|
lbs_pr_err("firmware file format check FAIL\n");
|
|
else
|
|
lbs_deb_fw("firmware file format check PASS\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int if_usb_prog_firmware(struct usb_card_rec *cardp)
|
|
{
|
|
int i = 0;
|
|
static int reset_count = 10;
|
|
int ret = 0;
|
|
|
|
lbs_deb_enter(LBS_DEB_USB);
|
|
|
|
if ((ret = request_firmware(&cardp->fw, lbs_fw_name,
|
|
&cardp->udev->dev)) < 0) {
|
|
lbs_pr_err("request_firmware() failed with %#x\n", ret);
|
|
lbs_pr_err("firmware %s not found\n", lbs_fw_name);
|
|
goto done;
|
|
}
|
|
|
|
if (check_fwfile_format(cardp->fw->data, cardp->fw->size))
|
|
goto release_fw;
|
|
|
|
restart:
|
|
if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
|
|
lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n");
|
|
ret = -1;
|
|
goto release_fw;
|
|
}
|
|
|
|
cardp->bootcmdresp = 0;
|
|
do {
|
|
int j = 0;
|
|
i++;
|
|
/* Issue Boot command = 1, Boot from Download-FW */
|
|
if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB);
|
|
/* wait for command response */
|
|
do {
|
|
j++;
|
|
msleep_interruptible(100);
|
|
} while (cardp->bootcmdresp == 0 && j < 10);
|
|
} while (cardp->bootcmdresp == 0 && i < 5);
|
|
|
|
if (cardp->bootcmdresp == 0) {
|
|
if (--reset_count >= 0) {
|
|
if_usb_reset_device(cardp);
|
|
goto restart;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
i = 0;
|
|
|
|
cardp->totalbytes = 0;
|
|
cardp->fwlastblksent = 0;
|
|
cardp->CRC_OK = 1;
|
|
cardp->fwdnldover = 0;
|
|
cardp->fwseqnum = -1;
|
|
cardp->totalbytes = 0;
|
|
cardp->fwfinalblk = 0;
|
|
|
|
if_prog_firmware(cardp);
|
|
|
|
do {
|
|
lbs_deb_usbd(&cardp->udev->dev,"Wlan sched timeout\n");
|
|
i++;
|
|
msleep_interruptible(100);
|
|
if (cardp->surprise_removed || i >= 20)
|
|
break;
|
|
} while (!cardp->fwdnldover);
|
|
|
|
if (!cardp->fwdnldover) {
|
|
lbs_pr_info("failed to load fw, resetting device!\n");
|
|
if (--reset_count >= 0) {
|
|
if_usb_reset_device(cardp);
|
|
goto restart;
|
|
}
|
|
|
|
lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
|
|
ret = -1;
|
|
goto release_fw;
|
|
}
|
|
|
|
release_fw:
|
|
release_firmware(cardp->fw);
|
|
cardp->fw = NULL;
|
|
|
|
done:
|
|
lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
static int if_usb_suspend(struct usb_interface *intf, pm_message_t message)
|
|
{
|
|
struct usb_card_rec *cardp = usb_get_intfdata(intf);
|
|
struct lbs_private *priv = cardp->priv;
|
|
|
|
lbs_deb_enter(LBS_DEB_USB);
|
|
|
|
if (priv->adapter->psstate != PS_STATE_FULL_POWER)
|
|
return -1;
|
|
|
|
if (priv->mesh_dev && !priv->mesh_autostart_enabled) {
|
|
/* Mesh autostart must be activated while sleeping
|
|
* On resume it will go back to the current state
|
|
*/
|
|
struct cmd_ds_mesh_access mesh_access;
|
|
memset(&mesh_access, 0, sizeof(mesh_access));
|
|
mesh_access.data[0] = cpu_to_le32(1);
|
|
lbs_prepare_and_send_command(priv,
|
|
CMD_MESH_ACCESS,
|
|
CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
|
|
CMD_OPTION_WAITFORRSP, 0, (void *)&mesh_access);
|
|
}
|
|
|
|
netif_device_detach(cardp->eth_dev);
|
|
netif_device_detach(priv->mesh_dev);
|
|
|
|
/* Unlink tx & rx urb */
|
|
usb_kill_urb(cardp->tx_urb);
|
|
usb_kill_urb(cardp->rx_urb);
|
|
|
|
cardp->rx_urb_recall = 1;
|
|
|
|
lbs_deb_leave(LBS_DEB_USB);
|
|
return 0;
|
|
}
|
|
|
|
static int if_usb_resume(struct usb_interface *intf)
|
|
{
|
|
struct usb_card_rec *cardp = usb_get_intfdata(intf);
|
|
struct lbs_private *priv = cardp->priv;
|
|
|
|
lbs_deb_enter(LBS_DEB_USB);
|
|
|
|
cardp->rx_urb_recall = 0;
|
|
|
|
if_usb_submit_rx_urb(cardp->priv);
|
|
|
|
netif_device_attach(cardp->eth_dev);
|
|
netif_device_attach(priv->mesh_dev);
|
|
|
|
if (priv->mesh_dev && !priv->mesh_autostart_enabled) {
|
|
/* Mesh autostart was activated while sleeping
|
|
* Disable it if appropriate
|
|
*/
|
|
struct cmd_ds_mesh_access mesh_access;
|
|
memset(&mesh_access, 0, sizeof(mesh_access));
|
|
mesh_access.data[0] = cpu_to_le32(0);
|
|
lbs_prepare_and_send_command(priv,
|
|
CMD_MESH_ACCESS,
|
|
CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
|
|
CMD_OPTION_WAITFORRSP, 0, (void *)&mesh_access);
|
|
}
|
|
|
|
lbs_deb_leave(LBS_DEB_USB);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define if_usb_suspend NULL
|
|
#define if_usb_resume NULL
|
|
#endif
|
|
|
|
static struct usb_driver if_usb_driver = {
|
|
.name = DRV_NAME,
|
|
.probe = if_usb_probe,
|
|
.disconnect = if_usb_disconnect,
|
|
.id_table = if_usb_table,
|
|
.suspend = if_usb_suspend,
|
|
.resume = if_usb_resume,
|
|
};
|
|
|
|
static int __init if_usb_init_module(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
lbs_deb_enter(LBS_DEB_MAIN);
|
|
|
|
ret = usb_register(&if_usb_driver);
|
|
|
|
lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
static void __exit if_usb_exit_module(void)
|
|
{
|
|
lbs_deb_enter(LBS_DEB_MAIN);
|
|
|
|
usb_deregister(&if_usb_driver);
|
|
|
|
lbs_deb_leave(LBS_DEB_MAIN);
|
|
}
|
|
|
|
module_init(if_usb_init_module);
|
|
module_exit(if_usb_exit_module);
|
|
|
|
MODULE_DESCRIPTION("8388 USB WLAN Driver");
|
|
MODULE_AUTHOR("Marvell International Ltd.");
|
|
MODULE_LICENSE("GPL");
|