ac840605f3
Currently, there are two different fields in the mv643xx_eth_platform_data struct that together describe the PHY address -- one field (phy_addr) has the address of the PHY, but if that address is zero, a second field (force_phy_addr) needs to be set to distinguish the actual address zero from a zero due to not having filled in the PHY address explicitly (which should mean 'use the default PHY address'). If we are a bit smarter about the encoding of the phy_addr field, we can avoid the need for a second field -- this patch does that. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
176 lines
4.7 KiB
C
176 lines
4.7 KiB
C
/*
|
|
* arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
|
|
*
|
|
* Marvell Orion-VoIP GE Reference Design Setup
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/i2c.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/leds.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <mach/orion5x.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
|
|
/*****************************************************************************
|
|
* RD-88F5181L GE Info
|
|
****************************************************************************/
|
|
/*
|
|
* 16M NOR flash Device bus boot chip select
|
|
*/
|
|
#define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000
|
|
#define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M
|
|
|
|
|
|
/*****************************************************************************
|
|
* 16M NOR Flash on Device bus Boot chip select
|
|
****************************************************************************/
|
|
static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
|
|
.width = 1,
|
|
};
|
|
|
|
static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = RD88F5181L_GE_NOR_BOOT_BASE,
|
|
.end = RD88F5181L_GE_NOR_BOOT_BASE +
|
|
RD88F5181L_GE_NOR_BOOT_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device rd88f5181l_ge_nor_boot_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &rd88f5181l_ge_nor_boot_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &rd88f5181l_ge_nor_boot_flash_resource,
|
|
};
|
|
|
|
|
|
/*****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
|
|
{ 0, MPP_GPIO }, /* LED1 */
|
|
{ 1, MPP_GPIO }, /* LED5 */
|
|
{ 2, MPP_GPIO }, /* LED4 */
|
|
{ 3, MPP_GPIO }, /* LED3 */
|
|
{ 4, MPP_GPIO }, /* PCI_intA */
|
|
{ 5, MPP_GPIO }, /* RTC interrupt */
|
|
{ 6, MPP_PCI_CLK }, /* CPU PCI refclk */
|
|
{ 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */
|
|
{ 8, MPP_GPIO }, /* 88e6131 interrupt */
|
|
{ 9, MPP_GPIO }, /* GE_RXERR */
|
|
{ 10, MPP_GPIO }, /* PCI_intB */
|
|
{ 11, MPP_GPIO }, /* LED2 */
|
|
{ 12, MPP_GIGE }, /* GE_TXD[4] */
|
|
{ 13, MPP_GIGE }, /* GE_TXD[5] */
|
|
{ 14, MPP_GIGE }, /* GE_TXD[6] */
|
|
{ 15, MPP_GIGE }, /* GE_TXD[7] */
|
|
{ 16, MPP_GIGE }, /* GE_RXD[4] */
|
|
{ 17, MPP_GIGE }, /* GE_RXD[5] */
|
|
{ 18, MPP_GIGE }, /* GE_RXD[6] */
|
|
{ 19, MPP_GIGE }, /* GE_RXD[7] */
|
|
{ -1 },
|
|
};
|
|
|
|
static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_NONE,
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_FULL,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
|
|
I2C_BOARD_INFO("ds1338", 0x68),
|
|
};
|
|
|
|
static void __init rd88f5181l_ge_init(void)
|
|
{
|
|
/*
|
|
* Setup basic Orion functions. Need to be called early.
|
|
*/
|
|
orion5x_init();
|
|
|
|
orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
|
|
|
|
/*
|
|
* Configure peripherals.
|
|
*/
|
|
orion5x_ehci0_init();
|
|
orion5x_eth_init(&rd88f5181l_ge_eth_data);
|
|
orion5x_i2c_init();
|
|
orion5x_uart0_init();
|
|
|
|
orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
|
|
RD88F5181L_GE_NOR_BOOT_SIZE);
|
|
platform_device_register(&rd88f5181l_ge_nor_boot_flash);
|
|
|
|
i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
|
|
}
|
|
|
|
static int __init
|
|
rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
/*
|
|
* Check for devices with hard-wired IRQs.
|
|
*/
|
|
irq = orion5x_pci_map_irq(dev, slot, pin);
|
|
if (irq != -1)
|
|
return irq;
|
|
|
|
/*
|
|
* Cardbus slot.
|
|
*/
|
|
if (pin == 1)
|
|
return gpio_to_irq(4);
|
|
else
|
|
return gpio_to_irq(10);
|
|
}
|
|
|
|
static struct hw_pci rd88f5181l_ge_pci __initdata = {
|
|
.nr_controllers = 2,
|
|
.swizzle = pci_std_swizzle,
|
|
.setup = orion5x_pci_sys_setup,
|
|
.scan = orion5x_pci_sys_scan_bus,
|
|
.map_irq = rd88f5181l_ge_pci_map_irq,
|
|
};
|
|
|
|
static int __init rd88f5181l_ge_pci_init(void)
|
|
{
|
|
if (machine_is_rd88f5181l_ge()) {
|
|
orion5x_pci_set_cardbus_mode();
|
|
pci_common_init(&rd88f5181l_ge_pci);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
subsys_initcall(rd88f5181l_ge_pci_init);
|
|
|
|
MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
|
|
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
|
|
.phys_io = ORION5X_REGS_PHYS_BASE,
|
|
.io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
|
|
.boot_params = 0x00000100,
|
|
.init_machine = rd88f5181l_ge_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_irq = orion5x_init_irq,
|
|
.timer = &orion5x_timer,
|
|
.fixup = tag_fixup_mem32,
|
|
MACHINE_END
|