android_kernel_xiaomi_sm8350/net/ax25/ax25_ds_subr.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

212 lines
5.1 KiB
C

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
* Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
*/
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/spinlock.h>
#include <linux/net.h>
#include <linux/gfp.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
void ax25_ds_nr_error_recovery(ax25_cb *ax25)
{
ax25_ds_establish_data_link(ax25);
}
/*
* dl1bke 960114: transmit I frames on DAMA poll
*/
void ax25_ds_enquiry_response(ax25_cb *ax25)
{
ax25_cb *ax25o;
struct hlist_node *node;
/* Please note that neither DK4EG's nor DG2FEF's
* DAMA spec mention the following behaviour as seen
* with TheFirmware:
*
* DB0ACH->DL1BKE <RR C P R0> [DAMA]
* DL1BKE->DB0ACH <I NR=0 NS=0>
* DL1BKE-7->DB0PRA-6 DB0ACH <I C S3 R5>
* DL1BKE->DB0ACH <RR R F R0>
*
* The Flexnet DAMA Master implementation apparently
* insists on the "proper" AX.25 behaviour:
*
* DB0ACH->DL1BKE <RR C P R0> [DAMA]
* DL1BKE->DB0ACH <RR R F R0>
* DL1BKE->DB0ACH <I NR=0 NS=0>
* DL1BKE-7->DB0PRA-6 DB0ACH <I C S3 R5>
*
* Flexnet refuses to send us *any* I frame if we send
* a REJ in case AX25_COND_REJECT is set. It is superfluous in
* this mode anyway (a RR or RNR invokes the retransmission).
* Is this a Flexnet bug?
*/
ax25_std_enquiry_response(ax25);
if (!(ax25->condition & AX25_COND_PEER_RX_BUSY)) {
ax25_requeue_frames(ax25);
ax25_kick(ax25);
}
if (ax25->state == AX25_STATE_1 || ax25->state == AX25_STATE_2 || skb_peek(&ax25->ack_queue) != NULL)
ax25_ds_t1_timeout(ax25);
else
ax25->n2count = 0;
ax25_start_t3timer(ax25);
ax25_ds_set_timer(ax25->ax25_dev);
spin_lock(&ax25_list_lock);
ax25_for_each(ax25o, node, &ax25_list) {
if (ax25o == ax25)
continue;
if (ax25o->ax25_dev != ax25->ax25_dev)
continue;
if (ax25o->state == AX25_STATE_1 || ax25o->state == AX25_STATE_2) {
ax25_ds_t1_timeout(ax25o);
continue;
}
if (!(ax25o->condition & AX25_COND_PEER_RX_BUSY) && ax25o->state == AX25_STATE_3) {
ax25_requeue_frames(ax25o);
ax25_kick(ax25o);
}
if (ax25o->state == AX25_STATE_1 || ax25o->state == AX25_STATE_2 || skb_peek(&ax25o->ack_queue) != NULL)
ax25_ds_t1_timeout(ax25o);
/* do not start T3 for listening sockets (tnx DD8NE) */
if (ax25o->state != AX25_STATE_0)
ax25_start_t3timer(ax25o);
}
spin_unlock(&ax25_list_lock);
}
void ax25_ds_establish_data_link(ax25_cb *ax25)
{
ax25->condition &= AX25_COND_DAMA_MODE;
ax25->n2count = 0;
ax25_calculate_t1(ax25);
ax25_start_t1timer(ax25);
ax25_stop_t2timer(ax25);
ax25_start_t3timer(ax25);
}
/*
* :::FIXME:::
* This is a kludge. Not all drivers recognize kiss commands.
* We need a driver level request to switch duplex mode, that does
* either SCC changing, PI config or KISS as required. Currently
* this request isn't reliable.
*/
static void ax25_kiss_cmd(ax25_dev *ax25_dev, unsigned char cmd, unsigned char param)
{
struct sk_buff *skb;
unsigned char *p;
if (ax25_dev->dev == NULL)
return;
if ((skb = alloc_skb(2, GFP_ATOMIC)) == NULL)
return;
skb_reset_network_header(skb);
p = skb_put(skb, 2);
*p++ = cmd;
*p++ = param;
skb->protocol = ax25_type_trans(skb, ax25_dev->dev);
dev_queue_xmit(skb);
}
/*
* A nasty problem arises if we count the number of DAMA connections
* wrong, especially when connections on the device already existed
* and our network node (or the sysop) decides to turn on DAMA Master
* mode. We thus flag the 'real' slave connections with
* ax25->dama_slave=1 and look on every disconnect if still slave
* connections exist.
*/
static int ax25_check_dama_slave(ax25_dev *ax25_dev)
{
ax25_cb *ax25;
int res = 0;
struct hlist_node *node;
spin_lock(&ax25_list_lock);
ax25_for_each(ax25, node, &ax25_list)
if (ax25->ax25_dev == ax25_dev && (ax25->condition & AX25_COND_DAMA_MODE) && ax25->state > AX25_STATE_1) {
res = 1;
break;
}
spin_unlock(&ax25_list_lock);
return res;
}
static void ax25_dev_dama_on(ax25_dev *ax25_dev)
{
if (ax25_dev == NULL)
return;
if (ax25_dev->dama.slave == 0)
ax25_kiss_cmd(ax25_dev, 5, 1);
ax25_dev->dama.slave = 1;
ax25_ds_set_timer(ax25_dev);
}
void ax25_dev_dama_off(ax25_dev *ax25_dev)
{
if (ax25_dev == NULL)
return;
if (ax25_dev->dama.slave && !ax25_check_dama_slave(ax25_dev)) {
ax25_kiss_cmd(ax25_dev, 5, 0);
ax25_dev->dama.slave = 0;
ax25_ds_del_timer(ax25_dev);
}
}
void ax25_dama_on(ax25_cb *ax25)
{
ax25_dev_dama_on(ax25->ax25_dev);
ax25->condition |= AX25_COND_DAMA_MODE;
}
void ax25_dama_off(ax25_cb *ax25)
{
ax25->condition &= ~AX25_COND_DAMA_MODE;
ax25_dev_dama_off(ax25->ax25_dev);
}