android_kernel_xiaomi_sm8350/drivers/mmc/host/pxamci.h
Bridge Wu 5d3ad4e8a1 mmc: pxamci: add SDIO card interrupt reporting capability
Again, only available from PXA27x.

Signed-off-by: Bridge Wu <mingqiao.wu@gmail.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-25 19:11:49 +02:00

105 lines
2.5 KiB
C

#define MMC_STRPCL 0x0000
#define STOP_CLOCK (1 << 0)
#define START_CLOCK (2 << 0)
#define MMC_STAT 0x0004
#define STAT_END_CMD_RES (1 << 13)
#define STAT_PRG_DONE (1 << 12)
#define STAT_DATA_TRAN_DONE (1 << 11)
#define STAT_CLK_EN (1 << 8)
#define STAT_RECV_FIFO_FULL (1 << 7)
#define STAT_XMIT_FIFO_EMPTY (1 << 6)
#define STAT_RES_CRC_ERR (1 << 5)
#define STAT_SPI_READ_ERROR_TOKEN (1 << 4)
#define STAT_CRC_READ_ERROR (1 << 3)
#define STAT_CRC_WRITE_ERROR (1 << 2)
#define STAT_TIME_OUT_RESPONSE (1 << 1)
#define STAT_READ_TIME_OUT (1 << 0)
#define MMC_CLKRT 0x0008 /* 3 bit */
#define MMC_SPI 0x000c
#define SPI_CS_ADDRESS (1 << 3)
#define SPI_CS_EN (1 << 2)
#define CRC_ON (1 << 1)
#define SPI_EN (1 << 0)
#define MMC_CMDAT 0x0010
#define CMDAT_SDIO_INT_EN (1 << 11)
#define CMDAT_SD_4DAT (1 << 8)
#define CMDAT_DMAEN (1 << 7)
#define CMDAT_INIT (1 << 6)
#define CMDAT_BUSY (1 << 5)
#define CMDAT_STREAM (1 << 4) /* 1 = stream */
#define CMDAT_WRITE (1 << 3) /* 1 = write */
#define CMDAT_DATAEN (1 << 2)
#define CMDAT_RESP_NONE (0 << 0)
#define CMDAT_RESP_SHORT (1 << 0)
#define CMDAT_RESP_R2 (2 << 0)
#define CMDAT_RESP_R3 (3 << 0)
#define MMC_RESTO 0x0014 /* 7 bit */
#define MMC_RDTO 0x0018 /* 16 bit */
#define MMC_BLKLEN 0x001c /* 10 bit */
#define MMC_NOB 0x0020 /* 16 bit */
#define MMC_PRTBUF 0x0024
#define BUF_PART_FULL (1 << 0)
#define MMC_I_MASK 0x0028
/*PXA27x MMC interrupts*/
#define SDIO_SUSPEND_ACK (1 << 12)
#define SDIO_INT (1 << 11)
#define RD_STALLED (1 << 10)
#define RES_ERR (1 << 9)
#define DAT_ERR (1 << 8)
#define TINT (1 << 7)
/*PXA2xx MMC interrupts*/
#define TXFIFO_WR_REQ (1 << 6)
#define RXFIFO_RD_REQ (1 << 5)
#define CLK_IS_OFF (1 << 4)
#define STOP_CMD (1 << 3)
#define END_CMD_RES (1 << 2)
#define PRG_DONE (1 << 1)
#define DATA_TRAN_DONE (1 << 0)
#ifdef CONFIG_PXA27x
#define MMC_I_MASK_ALL 0x00001fff
#else
#define MMC_I_MASK_ALL 0x0000007f
#endif
#define MMC_I_REG 0x002c
/* same as MMC_I_MASK */
#define MMC_CMD 0x0030
#define MMC_ARGH 0x0034 /* 16 bit */
#define MMC_ARGL 0x0038 /* 16 bit */
#define MMC_RES 0x003c /* 16 bit */
#define MMC_RXFIFO 0x0040 /* 8 bit */
#define MMC_TXFIFO 0x0044 /* 8 bit */
/*
* The base MMC clock rate
*/
#ifdef CONFIG_PXA27x
#define CLOCKRATE_MIN 304688
#define CLOCKRATE_MAX 19500000
#else
#define CLOCKRATE_MIN 312500
#define CLOCKRATE_MAX 20000000
#endif
#define CLOCKRATE CLOCKRATE_MAX