android_kernel_xiaomi_sm8350/drivers/usb/serial/ftdi_sio.c
Cliff Brake a8cbd90a04 USB: ftdi_sio: add USB device ID's for B&B Electronics line
Reviewed-by: John Pilles <jpilles@bb-elec.com>
Signed-off-by: Cliff Brake <cbrake@bec-systems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:28 -08:00

2555 lines
86 KiB
C

/*
* USB FTDI SIO driver
*
* Copyright (C) 1999 - 2001
* Greg Kroah-Hartman (greg@kroah.com)
* Bill Ryder (bryder@sgi.com)
* Copyright (C) 2002
* Kuba Ober (kuba@mareimbrium.org)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*
* See http://ftdi-usb-sio.sourceforge.net for upto date testing info
* and extra documentation
*
* Change entries from 2004 and earlier can be found in versions of this
* file in kernel versions prior to the 2.6.24 release.
*
*/
/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
/* Thanx to FTDI for so kindly providing details of the protocol required */
/* to talk to the device */
/* Thanx to gkh and the rest of the usb dev group for all code I have
assimilated :-) */
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
#include <linux/usb/serial.h>
#include "ftdi_sio.h"
/*
* Version Information
*/
#define DRIVER_VERSION "v1.5.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
static __u16 vendor = FTDI_VID;
static __u16 product;
struct ftdi_private {
struct kref kref;
ftdi_chip_type_t chip_type;
/* type of device, either SIO or FT8U232AM */
int baud_base; /* baud base clock for divisor setting */
int custom_divisor; /* custom_divisor kludge, this is for
baud_base (different from what goes to the
chip!) */
__u16 last_set_data_urb_value ;
/* the last data state set - needed for doing
* a break
*/
int write_offset; /* This is the offset in the usb data block to
* write the serial data - it varies between
* devices
*/
int flags; /* some ASYNC_xxxx flags are supported */
unsigned long last_dtr_rts; /* saved modem control outputs */
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
char prev_status, diff_status; /* Used for TIOCMIWAIT */
struct usb_serial_port *port;
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
(0 for FT232/245) */
speed_t force_baud; /* if non-zero, force the baud rate to
this value */
int force_rtscts; /* if non-zero, force RTS-CTS to always
be enabled */
unsigned int latency; /* latency setting in use */
spinlock_t tx_lock; /* spinlock for transmit state */
unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
unsigned long tx_outstanding_urbs;
unsigned short max_packet_size;
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
int (*probe)(struct usb_serial *);
/* Special settings for probed ports. */
void (*port_probe)(struct ftdi_private *);
};
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
static struct ftdi_sio_quirk ftdi_jtag_quirk = {
.probe = ftdi_jtag_probe,
};
static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
.probe = ftdi_mtxorb_hack_setup,
};
static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
.probe = ftdi_NDI_device_setup,
};
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
.port_probe = ftdi_HE_TIRA1_setup,
};
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
* o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
* o 230400 at 12MHz
* so .. 8U232AM's baudrate setting codes are different
* - it has a two byte status code.
* - it returns characters every 16ms (the FTDI does it every 40ms)
*
* the bcdDevice value is used to differentiate FT232BM and FT245BM from
* the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
* combinations in both tables.
* FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
* but I don't know if those ever went into mass production. [Ian Abbott]
*/
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
/*
* Due to many user requests for multiple ELV devices we enable
* them by default.
*/
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) },
{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
{ USB_DEVICE(DE_VID, STB_PID) },
{ USB_DEVICE(DE_VID, WHT_PID) },
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table_combined);
static struct usb_driver ftdi_driver = {
.name = "ftdi_sio",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table_combined,
.no_dynamic_id = 1,
};
static const char *ftdi_chip_name[] = {
[SIO] = "SIO", /* the serial part of FT8U100AX */
[FT8U232AM] = "FT8U232AM",
[FT232BM] = "FT232BM",
[FT2232C] = "FT2232C",
[FT232RL] = "FT232RL",
[FT2232H] = "FT2232H",
[FT4232H] = "FT4232H"
};
/* Constants for read urb and write urb */
#define BUFSZ 512
/* Used for TIOCMIWAIT */
#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
#define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
/* End TIOCMIWAIT */
#define FTDI_IMPL_ASYNC_FLAGS = (ASYNC_SPD_HI | ASYNC_SPD_VHI \
| ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP)
/* function prototypes for a FTDI serial converter */
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int ftdi_sio_port_probe(struct usb_serial_port *port);
static int ftdi_sio_port_remove(struct usb_serial_port *port);
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
static void ftdi_close(struct usb_serial_port *port);
static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int ftdi_write_room(struct tty_struct *tty);
static int ftdi_chars_in_buffer(struct tty_struct *tty);
static void ftdi_write_bulk_callback(struct urb *urb);
static void ftdi_read_bulk_callback(struct urb *urb);
static void ftdi_process_read(struct usb_serial_port *port);
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int ftdi_tiocmget(struct tty_struct *tty, struct file *file);
static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
static void ftdi_throttle(struct tty_struct *tty);
static void ftdi_unthrottle(struct tty_struct *tty);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor(int baud);
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor(int baud);
static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
static __u32 ftdi_2232h_baud_to_divisor(int baud);
static struct usb_serial_driver ftdi_sio_device = {
.driver = {
.owner = THIS_MODULE,
.name = "ftdi_sio",
},
.description = "FTDI USB Serial Device",
.usb_driver = &ftdi_driver ,
.id_table = id_table_combined,
.num_ports = 1,
.probe = ftdi_sio_probe,
.port_probe = ftdi_sio_port_probe,
.port_remove = ftdi_sio_port_remove,
.open = ftdi_open,
.close = ftdi_close,
.dtr_rts = ftdi_dtr_rts,
.throttle = ftdi_throttle,
.unthrottle = ftdi_unthrottle,
.write = ftdi_write,
.write_room = ftdi_write_room,
.chars_in_buffer = ftdi_chars_in_buffer,
.read_bulk_callback = ftdi_read_bulk_callback,
.write_bulk_callback = ftdi_write_bulk_callback,
.tiocmget = ftdi_tiocmget,
.tiocmset = ftdi_tiocmset,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
};
#define WDR_TIMEOUT 5000 /* default urb timeout */
#define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
/* High and low are for DTR, RTS etc etc */
#define HIGH 1
#define LOW 0
/* number of outstanding urbs to prevent userspace DoS from happening */
#define URB_UPPER_LIMIT 42
/*
* ***************************************************************************
* Utility functions
* ***************************************************************************
*/
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
{
unsigned short int divisor;
/* divisor shifted 3 bits to the left */
int divisor3 = base / 2 / baud;
if ((divisor3 & 0x7) == 7)
divisor3++; /* round x.7/8 up to x+1 */
divisor = divisor3 >> 3;
divisor3 &= 0x7;
if (divisor3 == 1)
divisor |= 0xc000;
else if (divisor3 >= 4)
divisor |= 0x4000;
else if (divisor3 != 0)
divisor |= 0x8000;
else if (divisor == 1)
divisor = 0; /* special case for maximum baud rate */
return divisor;
}
static unsigned short int ftdi_232am_baud_to_divisor(int baud)
{
return ftdi_232am_baud_base_to_divisor(baud, 48000000);
}
static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
__u32 divisor;
/* divisor shifted 3 bits to the left */
int divisor3 = base / 2 / baud;
divisor = divisor3 >> 3;
divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
if (divisor == 1)
divisor = 0;
else if (divisor == 0x4001)
divisor = 1;
return divisor;
}
static __u32 ftdi_232bm_baud_to_divisor(int baud)
{
return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
}
static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
{
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
__u32 divisor;
int divisor3;
/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
divisor3 = (base / 10 / baud) * 8;
divisor = divisor3 >> 3;
divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
if (divisor == 1)
divisor = 0;
else if (divisor == 0x4001)
divisor = 1;
/*
* Set this bit to turn off a divide by 2.5 on baud rate generator
* This enables baud rates up to 12Mbaud but cannot reach below 1200
* baud with this bit set
*/
divisor |= 0x00020000;
return divisor;
}
static __u32 ftdi_2232h_baud_to_divisor(int baud)
{
return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
}
#define set_mctrl(port, set) update_mctrl((port), (set), 0)
#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
static int update_mctrl(struct usb_serial_port *port, unsigned int set,
unsigned int clear)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *buf;
unsigned urb_value;
int rv;
if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
dbg("%s - DTR|RTS not being set|cleared", __func__);
return 0; /* no change */
}
buf = kmalloc(1, GFP_NOIO);
if (!buf)
return -ENOMEM;
clear &= ~set; /* 'set' takes precedence over 'clear' */
urb_value = 0;
if (clear & TIOCM_DTR)
urb_value |= FTDI_SIO_SET_DTR_LOW;
if (clear & TIOCM_RTS)
urb_value |= FTDI_SIO_SET_RTS_LOW;
if (set & TIOCM_DTR)
urb_value |= FTDI_SIO_SET_DTR_HIGH;
if (set & TIOCM_RTS)
urb_value |= FTDI_SIO_SET_RTS_HIGH;
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
urb_value, priv->interface,
buf, 0, WDR_TIMEOUT);
kfree(buf);
if (rv < 0) {
dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
__func__,
(set & TIOCM_DTR) ? "HIGH" :
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" :
(clear & TIOCM_RTS) ? "LOW" : "unchanged");
} else {
dbg("%s - DTR %s, RTS %s", __func__,
(set & TIOCM_DTR) ? "HIGH" :
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" :
(clear & TIOCM_RTS) ? "LOW" : "unchanged");
/* FIXME: locking on last_dtr_rts */
priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
}
return rv;
}
static __u32 get_ftdi_divisor(struct tty_struct *tty,
struct usb_serial_port *port)
{ /* get_ftdi_divisor */
struct ftdi_private *priv = usb_get_serial_port_data(port);
__u32 div_value = 0;
int div_okay = 1;
int baud;
/*
* The logic involved in setting the baudrate can be cleanly split into
* 3 steps.
* 1. Standard baud rates are set in tty->termios->c_cflag
* 2. If these are not enough, you can set any speed using alt_speed as
* follows:
* - set tty->termios->c_cflag speed to B38400
* - set your real speed in tty->alt_speed; it gets ignored when
* alt_speed==0, (or)
* - call TIOCSSERIAL ioctl with (struct serial_struct) set as
* follows:
* flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP],
* this just sets alt_speed to (HI: 57600, VHI: 115200,
* SHI: 230400, WARP: 460800)
* ** Steps 1, 2 are done courtesy of tty_get_baud_rate
* 3. You can also set baud rate by setting custom divisor as follows
* - set tty->termios->c_cflag speed to B38400
* - call TIOCSSERIAL ioctl with (struct serial_struct) set as
* follows:
* o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
* o custom_divisor set to baud_base / your_new_baudrate
* ** Step 3 is done courtesy of code borrowed from serial.c
* I should really spend some time and separate + move this common
* code to serial.c, it is replicated in nearly every serial driver
* you see.
*/
/* 1. Get the baud rate from the tty settings, this observes
alt_speed hack */
baud = tty_get_baud_rate(tty);
dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
/* 2. Observe async-compatible custom_divisor hack, update baudrate
if needed */
if (baud == 38400 &&
((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(priv->custom_divisor)) {
baud = priv->baud_base / priv->custom_divisor;
dbg("%s - custom divisor %d sets baud rate to %d",
__func__, priv->custom_divisor, baud);
}
/* 3. Convert baudrate to device-specific divisor */
if (!baud)
baud = 9600;
switch (priv->chip_type) {
case SIO: /* SIO chip */
switch (baud) {
case 300: div_value = ftdi_sio_b300; break;
case 600: div_value = ftdi_sio_b600; break;
case 1200: div_value = ftdi_sio_b1200; break;
case 2400: div_value = ftdi_sio_b2400; break;
case 4800: div_value = ftdi_sio_b4800; break;
case 9600: div_value = ftdi_sio_b9600; break;
case 19200: div_value = ftdi_sio_b19200; break;
case 38400: div_value = ftdi_sio_b38400; break;
case 57600: div_value = ftdi_sio_b57600; break;
case 115200: div_value = ftdi_sio_b115200; break;
} /* baud */
if (div_value == 0) {
dbg("%s - Baudrate (%d) requested is not supported",
__func__, baud);
div_value = ftdi_sio_b9600;
baud = 9600;
div_okay = 0;
}
break;
case FT8U232AM: /* 8U232AM chip */
if (baud <= 3000000) {
div_value = ftdi_232am_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __func__);
baud = 9600;
div_value = ftdi_232am_baud_to_divisor(9600);
div_okay = 0;
}
break;
case FT232BM: /* FT232BM chip */
case FT2232C: /* FT2232C chip */
case FT232RL:
if (baud <= 3000000) {
__u16 product_id = le16_to_cpu(
port->serial->dev->descriptor.idProduct);
if (((FTDI_NDI_HUC_PID == product_id) ||
(FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
(FTDI_NDI_FUTURE_2_PID == product_id) ||
(FTDI_NDI_FUTURE_3_PID == product_id) ||
(FTDI_NDI_AURORA_SCU_PID == product_id)) &&
(baud == 19200)) {
baud = 1200000;
}
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __func__);
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
baud = 9600;
}
break;
case FT2232H: /* FT2232H chip */
case FT4232H: /* FT4232H chip */
if ((baud <= 12000000) & (baud >= 1200)) {
div_value = ftdi_2232h_baud_to_divisor(baud);
} else if (baud < 1200) {
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __func__);
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
baud = 9600;
}
break;
} /* priv->chip_type */
if (div_okay) {
dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
__func__, baud, (unsigned long)div_value,
ftdi_chip_name[priv->chip_type]);
}
tty_encode_baud_rate(tty, baud, baud);
return div_value;
}
static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *buf;
__u16 urb_value;
__u16 urb_index;
__u32 urb_index_value;
int rv;
buf = kmalloc(1, GFP_NOIO);
if (!buf)
return -ENOMEM;
urb_index_value = get_ftdi_divisor(tty, port);
urb_value = (__u16)urb_index_value;
urb_index = (__u16)(urb_index_value >> 16);
if (priv->interface) { /* FT2232C */
urb_index = (__u16)((urb_index << 8) | priv->interface);
}
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
urb_value, urb_index,
buf, 0, WDR_SHORT_TIMEOUT);
kfree(buf);
return rv;
}
static int write_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
char buf[1];
int rv = 0;
int l = priv->latency;
if (priv->flags & ASYNC_LOW_LATENCY)
l = 1;
dbg("%s: setting latency timer = %i", __func__, l);
rv = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
l, priv->interface,
buf, 0, WDR_TIMEOUT);
if (rv < 0)
dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
return rv;
}
static int read_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
unsigned short latency = 0;
int rv = 0;
dbg("%s", __func__);
rv = usb_control_msg(udev,
usb_rcvctrlpipe(udev, 0),
FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
0, priv->interface,
(char *) &latency, 1, WDR_TIMEOUT);
if (rv < 0) {
dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
return -EIO;
}
return latency;
}
static int get_serial_info(struct usb_serial_port *port,
struct serial_struct __user *retinfo)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct serial_struct tmp;
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tmp.flags = priv->flags;
tmp.baud_base = priv->baud_base;
tmp.custom_divisor = priv->custom_divisor;
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
return 0;
} /* get_serial_info */
static int set_serial_info(struct tty_struct *tty,
struct usb_serial_port *port, struct serial_struct __user *newinfo)
{ /* set_serial_info */
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct serial_struct new_serial;
struct ftdi_private old_priv;
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
return -EFAULT;
lock_kernel();
old_priv = *priv;
/* Do error checking and permission checking */
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
(priv->flags & ~ASYNC_USR_MASK))) {
unlock_kernel();
return -EPERM;
}
priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
priv->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
if ((new_serial.baud_base != priv->baud_base) &&
(new_serial.baud_base < 9600)) {
unlock_kernel();
return -EINVAL;
}
/* Make the changes - these are privileged changes! */
priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS));
priv->custom_divisor = new_serial.custom_divisor;
write_latency_timer(port);
check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
(priv->flags & ASYNC_SPD_MASK)) {
if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
tty->alt_speed = 57600;
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
tty->alt_speed = 115200;
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
tty->alt_speed = 230400;
else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
tty->alt_speed = 460800;
else
tty->alt_speed = 0;
}
if (((old_priv.flags & ASYNC_SPD_MASK) !=
(priv->flags & ASYNC_SPD_MASK)) ||
(((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(old_priv.custom_divisor != priv->custom_divisor))) {
unlock_kernel();
change_speed(tty, port);
}
else
unlock_kernel();
return 0;
} /* set_serial_info */
/* Determine type of FTDI chip based on USB config and descriptor. */
static void ftdi_determine_type(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
struct usb_device *udev = serial->dev;
unsigned version;
unsigned interfaces;
/* Assume it is not the original SIO device for now. */
priv->baud_base = 48000000 / 2;
priv->write_offset = 0;
version = le16_to_cpu(udev->descriptor.bcdDevice);
interfaces = udev->actconfig->desc.bNumInterfaces;
dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__,
version, interfaces);
if (interfaces > 1) {
int inter;
/* Multiple interfaces.*/
if (version == 0x0800) {
priv->chip_type = FT4232H;
/* Hi-speed - baud clock runs at 120MHz */
priv->baud_base = 120000000 / 2;
} else if (version == 0x0700) {
priv->chip_type = FT2232H;
/* Hi-speed - baud clock runs at 120MHz */
priv->baud_base = 120000000 / 2;
} else
priv->chip_type = FT2232C;
/* Determine interface code. */
inter = serial->interface->altsetting->desc.bInterfaceNumber;
if (inter == 0) {
priv->interface = INTERFACE_A;
} else if (inter == 1) {
priv->interface = INTERFACE_B;
} else if (inter == 2) {
priv->interface = INTERFACE_C;
} else if (inter == 3) {
priv->interface = INTERFACE_D;
}
/* BM-type devices have a bug where bcdDevice gets set
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
dbg("%s: something fishy - bcdDevice too low for multi-interface device",
__func__);
}
} else if (version < 0x200) {
/* Old device. Assume its the original SIO. */
priv->chip_type = SIO;
priv->baud_base = 12000000 / 16;
priv->write_offset = 1;
} else if (version < 0x400) {
/* Assume its an FT8U232AM (or FT8U245AM) */
/* (It might be a BM because of the iSerialNumber bug,
* but it will still work as an AM device.) */
priv->chip_type = FT8U232AM;
} else if (version < 0x600) {
/* Assume its an FT232BM (or FT245BM) */
priv->chip_type = FT232BM;
} else {
/* Assume its an FT232R */
priv->chip_type = FT232RL;
}
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
}
/* Determine the maximum packet size for the device. This depends on the chip
* type and the USB host capabilities. The value should be obtained from the
* device descriptor as the chip will use the appropriate values for the host.*/
static void ftdi_set_max_packet_size(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
unsigned num_endpoints;
int i = 0;
num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
/* NOTE: some customers have programmed FT232R/FT245R devices
* with an endpoint size of 0 - not good. In this case, we
* want to override the endpoint descriptor setting and use a
* value of 64 for wMaxPacketSize */
for (i = 0; i < num_endpoints; i++) {
dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
ep_desc = &interface->cur_altsetting->endpoint[i].desc;
if (ep_desc->wMaxPacketSize == 0) {
ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i);
}
}
/* set max packet size based on descriptor */
priv->max_packet_size = ep_desc->wMaxPacketSize;
dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
}
/*
* ***************************************************************************
* Sysfs Attribute
* ***************************************************************************
*/
static ssize_t show_latency_timer(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
if (priv->flags & ASYNC_LOW_LATENCY)
return sprintf(buf, "1\n");
else
return sprintf(buf, "%i\n", priv->latency);
}
/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t store_latency_timer(struct device *dev,
struct device_attribute *attr, const char *valbuf,
size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
priv->latency = v;
rv = write_latency_timer(port);
if (rv < 0)
return -EIO;
return count;
}
/* Write an event character directly to the FTDI register. The ASCII
value is in the low 8 bits, with the enable bit in the 9th bit. */
static ssize_t store_event_char(struct device *dev,
struct device_attribute *attr, const char *valbuf, size_t count)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
dbg("%s: setting event char = %i", __func__, v);
rv = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_EVENT_CHAR_REQUEST,
FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
v, priv->interface,
buf, 0, WDR_TIMEOUT);
if (rv < 0) {
dbg("Unable to write event character: %i", rv);
return -EIO;
}
return count;
}
static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer,
store_latency_timer);
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
static int create_sysfs_attrs(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
int retval = 0;
dbg("%s", __func__);
/* XXX I've no idea if the original SIO supports the event_char
* sysfs parameter, so I'm playing it safe. */
if (priv->chip_type != SIO) {
dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
retval = device_create_file(&port->dev, &dev_attr_event_char);
if ((!retval) &&
(priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
priv->chip_type == FT4232H)) {
retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
}
return retval;
}
static void remove_sysfs_attrs(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s", __func__);
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
device_remove_file(&port->dev, &dev_attr_event_char);
if (priv->chip_type == FT232BM ||
priv->chip_type == FT2232C ||
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
priv->chip_type == FT4232H) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
}
/*
* ***************************************************************************
* FTDI driver specific functions
* ***************************************************************************
*/
/* Probe function to check for special devices */
static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
struct ftdi_sio_quirk *quirk =
(struct ftdi_sio_quirk *)id->driver_info;
if (quirk && quirk->probe) {
int ret = quirk->probe(serial);
if (ret != 0)
return ret;
}
usb_set_serial_data(serial, (void *)id->driver_info);
return 0;
}
static int ftdi_sio_port_probe(struct usb_serial_port *port)
{
struct ftdi_private *priv;
struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
dbg("%s", __func__);
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv) {
dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
sizeof(struct ftdi_private));
return -ENOMEM;
}
kref_init(&priv->kref);
spin_lock_init(&priv->tx_lock);
init_waitqueue_head(&priv->delta_msr_wait);
/* This will push the characters through immediately rather
than queue a task to deliver them */
priv->flags = ASYNC_LOW_LATENCY;
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
/* Increase the size of read buffers */
kfree(port->bulk_in_buffer);
port->bulk_in_buffer = kmalloc(BUFSZ, GFP_KERNEL);
if (!port->bulk_in_buffer) {
kfree(priv);
return -ENOMEM;
}
if (port->read_urb) {
port->read_urb->transfer_buffer = port->bulk_in_buffer;
port->read_urb->transfer_buffer_length = BUFSZ;
}
priv->port = port;
/* Free port's existing write urb and transfer buffer. */
if (port->write_urb) {
usb_free_urb(port->write_urb);
port->write_urb = NULL;
}
kfree(port->bulk_out_buffer);
port->bulk_out_buffer = NULL;
usb_set_serial_port_data(port, priv);
ftdi_determine_type(port);
ftdi_set_max_packet_size(port);
read_latency_timer(port);
create_sysfs_attrs(port);
return 0;
}
/* Setup for the USB-UIRT device, which requires hardwired
* baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
{
dbg("%s", __func__);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
priv->force_baud = 38400;
} /* ftdi_USB_UIRT_setup */
/* Setup for the HE-TIRA1 device, which requires hardwired
* baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
{
dbg("%s", __func__);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
priv->force_baud = 38400;
priv->force_rtscts = 1;
} /* ftdi_HE_TIRA1_setup */
/*
* Module parameter to control latency timer for NDI FTDI-based USB devices.
* If this value is not set in modprobe.conf.local its value will be set to 1ms.
*/
static int ndi_latency_timer = 1;
/* Setup for the NDI FTDI-based USB devices, which requires hardwired
* baudrate (19200 gets mapped to 1200000).
*
* Called from usbserial:serial_probe.
*/
static int ftdi_NDI_device_setup(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
int latency = ndi_latency_timer;
int rv = 0;
char buf[1];
if (latency == 0)
latency = 1;
if (latency > 99)
latency = 99;
dbg("%s setting NDI device latency to %d", __func__, latency);
dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
latency, 0, buf, 0, WDR_TIMEOUT);
return 0;
}
/*
* First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
* Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
* userspace using openocd.
*/
static int ftdi_jtag_probe(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
dbg("%s", __func__);
if (interface == udev->actconfig->interface[0]) {
dev_info(&udev->dev,
"Ignoring serial port reserved for JTAG\n");
return -ENODEV;
}
return 0;
}
/*
* The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
* We have to correct it if we want to read from it.
*/
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
{
struct usb_host_endpoint *ep = serial->dev->ep_in[1];
struct usb_endpoint_descriptor *ep_desc = &ep->desc;
if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
dev_info(&serial->dev->dev,
"Fixing invalid wMaxPacketSize on read pipe\n");
}
return 0;
}
static void ftdi_sio_priv_release(struct kref *k)
{
struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
kfree(priv);
}
static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s", __func__);
remove_sysfs_attrs(port);
kref_put(&priv->kref, ftdi_sio_priv_release);
return 0;
}
static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
{
struct urb *urb = port->read_urb;
struct usb_serial *serial = port->serial;
int result;
usb_fill_bulk_urb(urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress),
urb->transfer_buffer,
urb->transfer_buffer_length,
ftdi_read_bulk_callback, port);
result = usb_submit_urb(urb, mem_flags);
if (result)
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
__func__, result);
return result;
}
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
{ /* ftdi_open */
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
int result = 0;
char buf[1]; /* Needed for the usb_control_msg I think */
dbg("%s", __func__);
spin_lock_irqsave(&priv->tx_lock, flags);
priv->tx_bytes = 0;
spin_unlock_irqrestore(&priv->tx_lock, flags);
write_latency_timer(port);
/* No error checking for this (will get errors later anyway) */
/* See ftdi_sio.h for description of what is reset */
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
FTDI_SIO_RESET_SIO,
priv->interface, buf, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
port->tty->termios - this would lose speed settings, etc.
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
if (tty)
ftdi_set_termios(tty, port, tty->termios);
/* Not throttled */
spin_lock_irqsave(&port->lock, flags);
port->throttled = 0;
port->throttle_req = 0;
spin_unlock_irqrestore(&port->lock, flags);
/* Start reading from the device */
result = ftdi_submit_read_urb(port, GFP_KERNEL);
if (!result)
kref_get(&priv->kref);
return result;
} /* ftdi_open */
static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
char buf[1];
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected) {
/* Disable flow control */
if (!on && usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface, buf, 0,
WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "error from flowcontrol urb\n");
}
/* drop RTS and DTR */
if (on)
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
else
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
mutex_unlock(&port->serial->disc_mutex);
}
/*
* usbserial:__serial_close only calls ftdi_close if the point is open
*
* This only gets called when it is the last close
*
*
*/
static void ftdi_close(struct usb_serial_port *port)
{ /* ftdi_close */
struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s", __func__);
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
kref_put(&priv->kref, ftdi_sio_priv_release);
} /* ftdi_close */
/* The SIO requires the first byte to have:
* B0 1
* B1 0
* B2..7 length of message excluding byte 0
*
* The new devices do not require this byte
*/
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{ /* ftdi_write */
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct urb *urb;
unsigned char *buffer;
int data_offset ; /* will be 1 for the SIO and 0 otherwise */
int status;
int transfer_size;
unsigned long flags;
dbg("%s port %d, %d bytes", __func__, port->number, count);
if (count == 0) {
dbg("write request of 0 bytes");
return 0;
}
spin_lock_irqsave(&priv->tx_lock, flags);
if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->tx_lock, flags);
dbg("%s - write limit hit\n", __func__);
return 0;
}
priv->tx_outstanding_urbs++;
spin_unlock_irqrestore(&priv->tx_lock, flags);
data_offset = priv->write_offset;
dbg("data_offset set to %d", data_offset);
/* Determine total transfer size */
transfer_size = count;
if (data_offset > 0) {
/* Original sio needs control bytes too... */
transfer_size += (data_offset *
((count + (priv->max_packet_size - 1 - data_offset)) /
(priv->max_packet_size - data_offset)));
}
buffer = kmalloc(transfer_size, GFP_ATOMIC);
if (!buffer) {
dev_err(&port->dev,
"%s ran out of kernel memory for urb ...\n", __func__);
count = -ENOMEM;
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
dev_err(&port->dev, "%s - no more free urbs\n", __func__);
count = -ENOMEM;
goto error_no_urb;
}
/* Copy data */
if (data_offset > 0) {
/* Original sio requires control byte at start of
each packet. */
int user_pktsz = priv->max_packet_size - data_offset;
int todo = count;
unsigned char *first_byte = buffer;
const unsigned char *current_position = buf;
while (todo > 0) {
if (user_pktsz > todo)
user_pktsz = todo;
/* Write the control byte at the front of the packet*/
*first_byte = 1 | ((user_pktsz) << 2);
/* Copy data for packet */
memcpy(first_byte + data_offset,
current_position, user_pktsz);
first_byte += user_pktsz + data_offset;
current_position += user_pktsz;
todo -= user_pktsz;
}
} else {
/* No control byte required. */
/* Copy in the data to send */
memcpy(buffer, buf, count);
}
usb_serial_debug_data(debug, &port->dev, __func__,
transfer_size, buffer);
/* fill the buffer and send it */
usb_fill_bulk_urb(urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
port->bulk_out_endpointAddress),
buffer, transfer_size,
ftdi_write_bulk_callback, port);
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
dev_err(&port->dev,
"%s - failed submitting write urb, error %d\n",
__func__, status);
count = status;
goto error;
} else {
spin_lock_irqsave(&priv->tx_lock, flags);
priv->tx_outstanding_bytes += count;
priv->tx_bytes += count;
spin_unlock_irqrestore(&priv->tx_lock, flags);
}
/* we are done with this urb, so let the host driver
* really free it when it is finished with it */
usb_free_urb(urb);
dbg("%s write returning: %d", __func__, count);
return count;
error:
usb_free_urb(urb);
error_no_urb:
kfree(buffer);
error_no_buffer:
spin_lock_irqsave(&priv->tx_lock, flags);
priv->tx_outstanding_urbs--;
spin_unlock_irqrestore(&priv->tx_lock, flags);
return count;
} /* ftdi_write */
/* This function may get called when the device is closed */
static void ftdi_write_bulk_callback(struct urb *urb)
{
unsigned long flags;
struct usb_serial_port *port = urb->context;
struct ftdi_private *priv;
int data_offset; /* will be 1 for the SIO and 0 otherwise */
unsigned long countback;
int status = urb->status;
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree(urb->transfer_buffer);
dbg("%s - port %d", __func__, port->number);
priv = usb_get_serial_port_data(port);
if (!priv) {
dbg("%s - bad port private data pointer - exiting", __func__);
return;
}
/* account for transferred data */
countback = urb->transfer_buffer_length;
data_offset = priv->write_offset;
if (data_offset > 0) {
/* Subtract the control bytes */
countback -= (data_offset * DIV_ROUND_UP(countback, priv->max_packet_size));
}
spin_lock_irqsave(&priv->tx_lock, flags);
--priv->tx_outstanding_urbs;
priv->tx_outstanding_bytes -= countback;
spin_unlock_irqrestore(&priv->tx_lock, flags);
if (status) {
dbg("nonzero write bulk status received: %d", status);
}
usb_serial_port_softint(port);
} /* ftdi_write_bulk_callback */
static int ftdi_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
int room;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->tx_lock, flags);
if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
/*
* We really can take anything the user throws at us
* but let's pick a nice big number to tell the tty
* layer that we have lots of free space
*/
room = 2048;
} else {
room = 0;
}
spin_unlock_irqrestore(&priv->tx_lock, flags);
return room;
}
static int ftdi_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
int buffered;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->tx_lock, flags);
buffered = (int)priv->tx_outstanding_bytes;
spin_unlock_irqrestore(&priv->tx_lock, flags);
if (buffered < 0) {
dev_err(&port->dev, "%s outstanding tx bytes is negative!\n",
__func__);
buffered = 0;
}
return buffered;
}
static int ftdi_process_packet(struct tty_struct *tty,
struct usb_serial_port *port, struct ftdi_private *priv,
char *packet, int len)
{
int i;
char status;
char flag;
char *ch;
dbg("%s - port %d", __func__, port->number);
if (len < 2) {
dbg("malformed packet");
return 0;
}
/* Compare new line status to the old one, signal if different/
N.B. packet may be processed more than once, but differences
are only processed once. */
status = packet[0] & FTDI_STATUS_B0_MASK;
if (status != priv->prev_status) {
priv->diff_status |= status ^ priv->prev_status;
wake_up_interruptible(&priv->delta_msr_wait);
priv->prev_status = status;
}
/*
* Although the device uses a bitmask and hence can have multiple
* errors on a packet - the order here sets the priority the error is
* returned to the tty layer.
*/
flag = TTY_NORMAL;
if (packet[1] & FTDI_RS_OE) {
flag = TTY_OVERRUN;
dbg("OVERRRUN error");
}
if (packet[1] & FTDI_RS_BI) {
flag = TTY_BREAK;
dbg("BREAK received");
usb_serial_handle_break(port);
}
if (packet[1] & FTDI_RS_PE) {
flag = TTY_PARITY;
dbg("PARITY error");
}
if (packet[1] & FTDI_RS_FE) {
flag = TTY_FRAME;
dbg("FRAMING error");
}
len -= 2;
if (!len)
return 0; /* status only */
ch = packet + 2;
if (!(port->console && port->sysrq) && flag == TTY_NORMAL)
tty_insert_flip_string(tty, ch, len);
else {
for (i = 0; i < len; i++, ch++) {
if (!usb_serial_handle_sysrq_char(tty, port, *ch))
tty_insert_flip_char(tty, *ch, flag);
}
}
return len;
}
static void ftdi_process_read(struct usb_serial_port *port)
{
struct urb *urb = port->read_urb;
struct tty_struct *tty;
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *data = (char *)urb->transfer_buffer;
int i;
int len;
int count = 0;
tty = tty_port_tty_get(&port->port);
if (!tty)
return;
for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
len = min_t(int, urb->actual_length - i, priv->max_packet_size);
count += ftdi_process_packet(tty, port, priv, &data[i], len);
}
if (count)
tty_flip_buffer_push(tty);
tty_kref_put(tty);
}
static void ftdi_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
if (urb->status) {
dbg("%s - nonzero read bulk status received: %d",
__func__, urb->status);
return;
}
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
ftdi_process_read(port);
spin_lock_irqsave(&port->lock, flags);
port->throttled = port->throttle_req;
if (!port->throttled) {
spin_unlock_irqrestore(&port->lock, flags);
ftdi_submit_read_urb(port, GFP_ATOMIC);
} else
spin_unlock_irqrestore(&port->lock, flags);
}
static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
__u16 urb_value = 0;
char buf[1];
/* break_state = -1 to turn on break, and 0 to turn off break */
/* see drivers/char/tty_io.c to see it used */
/* last_set_data_urb_value NEVER has the break bit set in it */
if (break_state)
urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
else
urb_value = priv->last_set_data_urb_value;
if (usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "%s FAILED to enable/disable break state "
"(state was %d)\n", __func__, break_state);
}
dbg("%s break state is %d - urb is %d", __func__,
break_state, urb_value);
}
/* old_termios contains the original termios settings and tty->termios contains
* the new setting to be used
* WARNING: set_termios calls this with old_termios in kernel space
*/
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{ /* ftdi_termios */
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct ktermios *termios = tty->termios;
unsigned int cflag = termios->c_cflag;
__u16 urb_value; /* will hold the new flags */
char buf[1]; /* Perhaps I should dynamically alloc this? */
/* Added for xon/xoff support */
unsigned int iflag = termios->c_iflag;
unsigned char vstop;
unsigned char vstart;
dbg("%s", __func__);
/* Force baud rate if this device requires it, unless it is set to
B0. */
if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
dbg("%s: forcing baud rate for this device", __func__);
tty_encode_baud_rate(tty, priv->force_baud,
priv->force_baud);
}
/* Force RTS-CTS if this device requires it. */
if (priv->force_rtscts) {
dbg("%s: forcing rtscts for this device", __func__);
termios->c_cflag |= CRTSCTS;
}
cflag = termios->c_cflag;
/* FIXME -For this cut I don't care if the line is really changing or
not - so just do the change regardless - should be able to
compare old_termios and tty->termios */
/* NOTE These routines can get interrupted by
ftdi_sio_read_bulk_callback - need to examine what this means -
don't see any problems yet */
/* Set number of data bits, parity, stop bits */
urb_value = 0;
urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
FTDI_SIO_SET_DATA_STOP_BITS_1);
if (cflag & PARENB) {
if (cflag & CMSPAR)
urb_value |= cflag & PARODD ?
FTDI_SIO_SET_DATA_PARITY_MARK :
FTDI_SIO_SET_DATA_PARITY_SPACE;
else
urb_value |= cflag & PARODD ?
FTDI_SIO_SET_DATA_PARITY_ODD :
FTDI_SIO_SET_DATA_PARITY_EVEN;
} else {
urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
case CS5: urb_value |= 5; dbg("Setting CS5"); break;
case CS6: urb_value |= 6; dbg("Setting CS6"); break;
case CS7: urb_value |= 7; dbg("Setting CS7"); break;
case CS8: urb_value |= 8; dbg("Setting CS8"); break;
default:
dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
}
}
/* This is needed by the break command since it uses the same command
- but is or'ed with this value */
priv->last_set_data_urb_value = urb_value;
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
buf, 0, WDR_SHORT_TIMEOUT) < 0) {
dev_err(&port->dev, "%s FAILED to set "
"databits/stopbits/parity\n", __func__);
}
/* Now do the baudrate */
if ((cflag & CBAUD) == B0) {
/* Disable flow control */
if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"%s error from disable flowcontrol urb\n",
__func__);
}
/* Drop RTS and DTR */
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/* set the baudrate determined before */
if (change_speed(tty, port))
dev_err(&port->dev, "%s urb failed to set baudrate\n",
__func__);
/* Ensure RTS and DTR are raised when baudrate changed from 0 */
if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
/* Set flow control */
/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
if (cflag & CRTSCTS) {
dbg("%s Setting to CRTSCTS flow control", __func__);
if (usb_control_msg(dev,
usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
buf, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"urb failed to set to rts/cts flow control\n");
}
} else {
/*
* Xon/Xoff code
*
* Check the IXOFF status in the iflag component of the
* termios structure. If IXOFF is not set, the pre-xon/xoff
* code is executed.
*/
if (iflag & IXOFF) {
dbg("%s request to enable xonxoff iflag=%04x",
__func__, iflag);
/* Try to enable the XON/XOFF on the ftdi_sio
* Set the vstart and vstop -- could have been done up
* above where a lot of other dereferencing is done but
* that would be very inefficient as vstart and vstop
* are not always needed.
*/
vstart = termios->c_cc[VSTART];
vstop = termios->c_cc[VSTOP];
urb_value = (vstop << 8) | (vstart);
if (usb_control_msg(dev,
usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
urb_value , (FTDI_SIO_XON_XOFF_HS
| priv->interface),
buf, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "urb failed to set to "
"xon/xoff flow control\n");
}
} else {
/* else clause to only run if cflag ! CRTSCTS and iflag
* ! XOFF. CHECKME Assuming XON/XOFF handled by tty
* stack - not by device */
dbg("%s Turning off hardware flow control", __func__);
if (usb_control_msg(dev,
usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"urb failed to clear flow control\n");
}
}
}
return;
}
static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char buf[2];
int ret;
dbg("%s TIOCMGET", __func__);
switch (priv->chip_type) {
case SIO:
/* Request the status from the device */
ret = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, 0,
buf, 1, WDR_TIMEOUT);
if (ret < 0)
return ret;
break;
case FT8U232AM:
case FT232BM:
case FT2232C:
case FT232RL:
case FT2232H:
case FT4232H:
/* the 8U232AM returns a two byte value (the sio is a 1 byte
value) - in the same format as the data returned from the in
point */
ret = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
FTDI_SIO_GET_MODEM_STATUS_REQUEST,
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, priv->interface,
buf, 2, WDR_TIMEOUT);
if (ret < 0)
return ret;
break;
default:
return -EFAULT;
}
return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
(buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
priv->last_dtr_rts;
}
static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s TIOCMSET", __func__);
return update_mctrl(port, set, clear);
}
static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s cmd 0x%04x", __func__, cmd);
/* Based on code from acm.c and others */
switch (cmd) {
case TIOCGSERIAL: /* gets serial port data */
return get_serial_info(port,
(struct serial_struct __user *) arg);
case TIOCSSERIAL: /* sets serial port data */
return set_serial_info(tty, port,
(struct serial_struct __user *) arg);
/*
* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was.
*
* This code is borrowed from linux/drivers/char/serial.c
*/
case TIOCMIWAIT:
while (priv != NULL) {
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
else {
char diff = priv->diff_status;
if (diff == 0)
return -EIO; /* no change => error */
/* Consume all events */
priv->diff_status = 0;
/* Return 0 if caller wanted to know about
these bits */
if (((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
((arg & TIOCM_CD) && (diff & FTDI_RS0_RLSD)) ||
((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS))) {
return 0;
}
/*
* Otherwise caller can't care less about what
* happened,and so we continue to wait for more
* events.
*/
}
}
return 0;
default:
break;
}
/* This is not necessarily an error - turns out the higher layers
* will do some ioctls themselves (see comment above)
*/
dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
return -ENOIOCTLCMD;
}
static void ftdi_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&port->lock, flags);
port->throttle_req = 1;
spin_unlock_irqrestore(&port->lock, flags);
}
void ftdi_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
int was_throttled;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&port->lock, flags);
was_throttled = port->throttled;
port->throttled = port->throttle_req = 0;
spin_unlock_irqrestore(&port->lock, flags);
/* Resubmit urb if throttled and open. */
if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
ftdi_submit_read_urb(port, GFP_KERNEL);
}
static int __init ftdi_init(void)
{
int retval;
dbg("%s", __func__);
if (vendor > 0 && product > 0) {
/* Add user specified VID/PID to reserved element of table. */
int i;
for (i = 0; id_table_combined[i].idVendor; i++)
;
id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
id_table_combined[i].idVendor = vendor;
id_table_combined[i].idProduct = product;
}
retval = usb_serial_register(&ftdi_sio_device);
if (retval)
goto failed_sio_register;
retval = usb_register(&ftdi_driver);
if (retval)
goto failed_usb_register;
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&ftdi_sio_device);
failed_sio_register:
return retval;
}
static void __exit ftdi_exit(void)
{
dbg("%s", __func__);
usb_deregister(&ftdi_driver);
usb_serial_deregister(&ftdi_sio_device);
}
module_init(ftdi_init);
module_exit(ftdi_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
module_param(vendor, ushort, 0);
MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
__MODULE_STRING(FTDI_VID)")");
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified product ID");
module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");