android_kernel_xiaomi_sm8350/Documentation/i2c/busses/i2c-ali1535
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

43 lines
1.5 KiB
Plaintext

Kernel driver i2c-ali1535
Supported adapters:
* Acer Labs, Inc. ALI 1535 (south bridge)
Datasheet: Now under NDA
http://www.ali.com.tw/eng/support/datasheet_request.php
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Dan Eaton <dan.eaton@rocketlogix.com>,
Stephen Rousset<stephen.rousset@rocketlogix.com>
Description
-----------
This is the driver for the SMB Host controller on Acer Labs Inc. (ALI)
M1535 South Bridge.
The M1535 is a South bridge for portable systems. It is very similar to the
M15x3 South bridges also produced by Acer Labs Inc. Some of the registers
within the part have moved and some have been redefined slightly.
Additionally, the sequencing of the SMBus transactions has been modified to
be more consistent with the sequencing recommended by the manufacturer and
observed through testing. These changes are reflected in this driver and
can be identified by comparing this driver to the i2c-ali15x3 driver. For
an overview of these chips see http://www.acerlabs.com
The SMB controller is part of the M7101 device, which is an ACPI-compliant
Power Management Unit (PMU).
The whole M7101 device has to be enabled for the SMB to work. You can't
just enable the SMB alone. The SMB and the ACPI have separate I/O spaces.
We make sure that the SMB is enabled. We leave the ACPI alone.
Features
--------
This driver controls the SMB Host only. This driver does not use
interrupts.