John Rigby b0bbad6068 [POWERPC] Add IPIC Kconfig option ... IPIC is not just for 83xx anymore so make it a separate config option. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>		2008-01-23 19:34:26 -06:00
..
bestcomm	[POWERPC] arch/powerpc/: Spelling fixes	2007-12-20 16:15:51 +11:00
qe_lib	[POWERPC] QE: Add support for Freescale QUICCEngine UART	2008-01-23 19:34:10 -06:00
axonram.c	[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/	2007-12-06 14:44:30 +11:00
commproc.c	[POWERPC] Move CPM command handling into the cpm drivers	2007-12-13 22:47:16 -06:00
commproc.h	[POWERPC] 8xx: Infrastructure code cleanup.	2007-10-03 20:36:35 -05:00
cpm2_common.c	Merge branch 'linux-2.6'	2007-12-21 22:21:08 +11:00
cpm2_pic.c	[POWERPC] cpm2: Infrastructure code cleanup.	2007-10-04 11:02:04 -05:00
cpm2_pic.h
cpm_common.c	[POWERPC] cpm: Fix a couple minor issues in cpm_common.c.	2007-11-09 03:47:44 -06:00
dart_iommu.c	[POWERPC] Fix section mismatch in dart_iommu.c	2007-08-17 11:02:06 +10:00
dart.h
dcr-low.S
dcr.c	Use dcr_host_t.base in dcr_unmap()	2007-10-15 14:29:49 -04:00
fsl_pci.c	[POWERPC] FSL: Rework PCI/PCIe support for 85xx/86xx	2008-01-23 19:31:16 -06:00
fsl_pci.h	[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected	2007-07-23 10:27:08 -05:00
fsl_soc.c	[POWERPC] fsl_soc: add support to gianfar for fixed-link property	2008-01-23 19:34:04 -06:00
fsl_soc.h	[POWERPC] 85xx/86xx: refactor RSTCR reset code	2007-10-08 08:38:47 -05:00
grackle.c	[POWERPC] pci32: Add flags modifying the PCI code behaviour	2007-12-20 16:18:07 +11:00
i8259.c	[POWERPC] i8259: Add disable method	2007-11-08 14:15:29 +11:00
indirect_pci.c	[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci	2007-10-12 14:05:17 +10:00
ipic.c	[POWERPC] Add support for mpc512x interrupts to ipic	2008-01-23 19:34:24 -06:00
ipic.h	[POWERPC] ipic: ack only for edge interrupts	2007-12-12 01:53:07 -06:00
Kconfig	[POWERPC] 4xx: PLB to PCI Express support	2007-12-23 13:12:34 -06:00
Makefile	[POWERPC] Add IPIC Kconfig option	2008-01-23 19:34:26 -06:00
micropatch.c
mmio_nvram.c	[POWERPC] arch/powerpc/: Spelling fixes	2007-12-20 16:15:51 +11:00
mpc8xx_pic.c	[POWERPC] 8xx: Infrastructure code cleanup.	2007-10-03 20:36:35 -05:00
mpc8xx_pic.h	[POWERPC] 8xx: mpc885ads pcmcia support	2007-07-10 00:33:51 -05:00
mpic_msi.c	[POWERPC] Fix section mismatch in PCI code	2007-09-19 15:25:34 +10:00
mpic_pasemi_msi.c	[POWERPC] pasemi: Implement MSI support	2007-12-20 16:15:23 +11:00
mpic_u3msi.c	[POWERPC] Inline u3msi_compose_msi_msg()	2007-10-03 09:11:42 +10:00
mpic.c	[POWERPC] Fixup use of phys_addr_t in mpic code	2008-01-23 19:32:33 -06:00
mpic.h	[POWERPC] pasemi: Implement NMI support	2007-12-28 09:22:24 -06:00
mv64x60_dev.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	2008-01-17 14:56:54 +11:00
mv64x60_pci.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	2008-01-17 14:56:54 +11:00
mv64x60_pic.c	[POWERPC] Provide a default irq_host match, which matches on an exact of_node	2007-09-14 01:33:20 +10:00
mv64x60_udbg.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	2008-01-17 14:56:54 +11:00
mv64x60.h	[POWERPC] Add Marvell mv64x60 udbg putc/getc functions	2007-09-22 14:49:21 +10:00
pmi.c	[POWERPC] Clean out asm/of_{platform, device}.h from sysdev/	2007-12-06 14:44:30 +11:00
ppc4xx_pci.c	[POWERPC] 4xx: PCIe: Increase max busses per port to 64	2008-01-08 08:05:23 -06:00
ppc4xx_pci.h	[POWERPC] 4xx: PCI-E Link setup improvements	2007-12-23 13:18:49 -06:00
rtc_cmos_setup.c	[POWERPC] Add interrupt resource for RTC CMOS driver	2007-08-17 13:18:58 -05:00
tsi108_dev.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	2008-01-17 14:56:54 +11:00
tsi108_pci.c	[POWERPC] Provide a default irq_host match, which matches on an exact of_node	2007-09-14 01:33:20 +10:00
uic.c	[POWERPC] Use for_each macros in arch/powerpc/sysdev	2008-01-17 14:56:54 +11:00
xilinx_intc.c	[POWERPC] Xilinx: update compatible list for interrupt controller	2008-01-09 07:48:31 -07:00