df34403dca
This adds the core 8xx stuff and specifically mpc885ads board-specific bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff not yet ported over to avoid confusion. Updated and cleaned version. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
186 lines
3.9 KiB
Plaintext
186 lines
3.9 KiB
Plaintext
/*
|
|
* MPC885 ADS Device Tree Source
|
|
*
|
|
* Copyright 2006 MontaVista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
|
|
/ {
|
|
model = "MPC885ADS";
|
|
compatible = "mpc8xx";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
linux,phandle = <100>;
|
|
|
|
cpus {
|
|
#cpus = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
linux,phandle = <200>;
|
|
|
|
PowerPC,885@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <20>; // 32 bytes
|
|
i-cache-line-size = <20>; // 32 bytes
|
|
d-cache-size = <2000>; // L1, 8K
|
|
i-cache-size = <2000>; // L1, 8K
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
32-bit;
|
|
interrupts = <f 2>; // decrementer interrupt
|
|
interrupt-parent = <ff000000>;
|
|
linux,phandle = <201>;
|
|
linux,boot-cpu;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
linux,phandle = <300>;
|
|
reg = <00000000 800000>;
|
|
};
|
|
|
|
soc885@ff000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <2>;
|
|
device_type = "soc";
|
|
ranges = <0 ff000000 00100000>;
|
|
reg = <ff000000 00000200>;
|
|
bus-frequency = <0>;
|
|
mdio@e80 {
|
|
device_type = "mdio";
|
|
compatible = "fs_enet";
|
|
reg = <e80 8>;
|
|
linux,phandle = <e80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ethernet-phy@0 {
|
|
linux,phandle = <e8000>;
|
|
reg = <0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
ethernet-phy@1 {
|
|
linux,phandle = <e8001>;
|
|
reg = <1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
ethernet-phy@2 {
|
|
linux,phandle = <e8002>;
|
|
reg = <2>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
fec@e00 {
|
|
device_type = "network";
|
|
compatible = "fs_enet";
|
|
model = "FEC";
|
|
device-id = <1>;
|
|
reg = <e00 188>;
|
|
mac-address = [ 00 00 0C 00 01 FD ];
|
|
interrupts = <3 1>;
|
|
interrupt-parent = <ff000000>;
|
|
phy-handle = <e8000>;
|
|
};
|
|
|
|
fec@1e00 {
|
|
device_type = "network";
|
|
compatible = "fs_enet";
|
|
model = "FEC";
|
|
device-id = <2>;
|
|
reg = <1e00 188>;
|
|
mac-address = [ 00 00 0C 00 02 FD ];
|
|
interrupts = <7 1>;
|
|
interrupt-parent = <ff000000>;
|
|
phy-handle = <e8001>;
|
|
};
|
|
|
|
pic@ff000000 {
|
|
linux,phandle = <ff000000>;
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0 24>;
|
|
built-in;
|
|
device_type = "mpc8xx-pic";
|
|
compatible = "CPM";
|
|
};
|
|
|
|
cpm@ff000000 {
|
|
linux,phandle = <ff000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <2>;
|
|
device_type = "cpm";
|
|
model = "CPM";
|
|
ranges = <0 0 4000>;
|
|
reg = <860 f0>;
|
|
command-proc = <9c0>;
|
|
brg-frequency = <0>;
|
|
interrupts = <0 2>; // cpm error interrupt
|
|
interrupt-parent = <930>;
|
|
|
|
pic@930 {
|
|
linux,phandle = <930>;
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <5 2 0 2>;
|
|
interrupt-parent = <ff000000>;
|
|
reg = <930 20>;
|
|
built-in;
|
|
device_type = "cpm-pic";
|
|
compatible = "CPM";
|
|
};
|
|
|
|
smc@a80 {
|
|
device_type = "serial";
|
|
compatible = "cpm_uart";
|
|
model = "SMC";
|
|
device-id = <1>;
|
|
reg = <a80 10 3e80 40>;
|
|
clock-setup = <00ffffff 0>;
|
|
rx-clock = <1>;
|
|
tx-clock = <1>;
|
|
current-speed = <0>;
|
|
interrupts = <4 3>;
|
|
interrupt-parent = <930>;
|
|
};
|
|
|
|
smc@a90 {
|
|
device_type = "serial";
|
|
compatible = "cpm_uart";
|
|
model = "SMC";
|
|
device-id = <2>;
|
|
reg = <a90 20 3f80 40>;
|
|
clock-setup = <ff00ffff 90000>;
|
|
rx-clock = <2>;
|
|
tx-clock = <2>;
|
|
current-speed = <0>;
|
|
interrupts = <3 3>;
|
|
interrupt-parent = <930>;
|
|
};
|
|
|
|
scc@a40 {
|
|
device_type = "network";
|
|
compatible = "fs_enet";
|
|
model = "SCC";
|
|
device-id = <3>;
|
|
reg = <a40 18 3e00 80>;
|
|
mac-address = [ 00 00 0C 00 03 FD ];
|
|
interrupts = <1c 3>;
|
|
interrupt-parent = <930>;
|
|
phy-handle = <e8002>;
|
|
};
|
|
};
|
|
};
|
|
};
|