lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
b37c7c66f0
android_kernel_xiaomi_sm8350/arch/sh/kernel/cpu/sh3/entry.S
Stuart Menefy fea966f756 sh: Remove implicit sign extension from assembler immediates 
The SH instruction set has several instructions which accept an 8 bit
immediate operand. For logical instructions this operand is zero extended,
for arithmetic instructions the operand is sign extended. After adding an
option to the assembler to check this, it was found that several pieces
of assembly code were assuming this behaviour, and in one case
getting it wrong.

So this patch explicitly sign extends any immediate operands, which makes
it obvious what is happening, and fixes the one case which got it wrong.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:09:53 +09:00

544 lines
11 KiB
ArmAsm
Raw Blame History

/*
* arch/sh/kernel/cpu/sh3/entry.S
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
* Copyright (C) 2003 - 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/sys.h>
#include <linux/errno.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/unistd.h>
#include <cpu/mmu_context.h>
#include <asm/page.h>
#include <asm/cache.h>
! NOTE:
! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
! to be jumped is too far, but it causes illegal slot exception.
/*
* entry.S contains the system-call and fault low-level handling routines.
* This also contains the timer-interrupt handler, as well as all interrupts
* and faults that can result in a task-switch.
*
* NOTE: This code handles signal-recognition, which happens every time
* after a timer-interrupt and after each system call.
*
* NOTE: This code uses a convention that instructions in the delay slot
* of a transfer-control instruction are indented by an extra space, thus:
*
* jmp @k0 ! control-transfer instruction
* ldc k1, ssr ! delay slot
*
* Stack layout in 'ret_from_syscall':
* ptrace needs to have all regs on the stack.
* if the order here is changed, it needs to be
* updated in ptrace.c and ptrace.h
*
* r0
* ...
* r15 = stack pointer
* spc
* pr
* ssr
* gbr
* mach
* macl
* syscall #
*
*/
#if defined(CONFIG_KGDB)
NMI_VEC = 0x1c0 ! Must catch early for debounce
#endif
/* Offsets to the stack */
OFF_R0 = 0 /* Return value. New ABI also arg4 */
OFF_R1 = 4 /* New ABI: arg5 */
OFF_R2 = 8 /* New ABI: arg6 */
OFF_R3 = 12 /* New ABI: syscall_nr */
OFF_R4 = 16 /* New ABI: arg0 */
OFF_R5 = 20 /* New ABI: arg1 */
OFF_R6 = 24 /* New ABI: arg2 */
OFF_R7 = 28 /* New ABI: arg3 */
OFF_SP = (15*4)
OFF_PC = (16*4)
OFF_SR = (16*4+8)
OFF_TRA = (16*4+6*4)
#define k0 r0
#define k1 r1
#define k2 r2
#define k3 r3
#define k4 r4
#define g_imask r6 /* r6_bank1 */
#define k_g_imask r6_bank /* r6_bank1 */
#define current r7 /* r7_bank1 */
#include <asm/entry-macros.S>
/*
* Kernel mode register usage:
* k0 scratch
* k1 scratch
* k2 scratch (Exception code)
* k3 scratch (Return address)
* k4 scratch
* k5 reserved
* k6 Global Interrupt Mask (0--15 << 4)
* k7 CURRENT_THREAD_INFO (pointer to current thread info)
*/
!
! TLB Miss / Initial Page write exception handling
! _and_
! TLB hits, but the access violate the protection.
! It can be valid access, such as stack grow and/or C-O-W.
!
!
! Find the pmd/pte entry and loadtlb
! If it's not found, cause address error (SEGV)
!
! Although this could be written in assembly language (and it'd be faster),
! this first version depends *much* on C implementation.
!
#if defined(CONFIG_MMU)
.align 2
ENTRY(tlb_miss_load)
bra call_dpf
mov #0, r5
.align 2
ENTRY(tlb_miss_store)
bra call_dpf
mov #1, r5
.align 2
ENTRY(initial_page_write)
bra call_dpf
mov #1, r5
.align 2
ENTRY(tlb_protection_violation_load)
bra call_dpf
mov #0, r5
.align 2
ENTRY(tlb_protection_violation_store)
bra call_dpf
mov #1, r5
call_dpf:
setup_frame_reg
mov.l 1f, r0
mov r5, r8
mov.l @r0, r6
mov r6, r9
mov.l 2f, r0
sts pr, r10
jsr @r0
mov r15, r4
!
tst r0, r0
bf/s 0f
lds r10, pr
rts
nop
0: mov.l 3f, r0
mov r9, r6
mov r8, r5
jmp @r0
mov r15, r4
.align 2
1: .long MMU_TEA
2: .long __do_page_fault
3: .long do_page_fault
.align 2
ENTRY(address_error_load)
bra call_dae
mov #0,r5 ! writeaccess = 0
.align 2
ENTRY(address_error_store)
bra call_dae
mov #1,r5 ! writeaccess = 1
.align 2
call_dae:
mov.l 1f, r0
mov.l @r0, r6 ! address
mov.l 2f, r0
jmp @r0
mov r15, r4 ! regs
.align 2
1: .long MMU_TEA
2: .long do_address_error
#endif /* CONFIG_MMU */
#if defined(CONFIG_SH_STANDARD_BIOS)
/* Unwind the stack and jmp to the debug entry */
ENTRY(sh_bios_handler)
mov.l 1f, r8
bsr restore_regs
nop
lds k2, pr ! restore pr
mov k4, r15
!
mov.l 2f, k0
mov.l @k0, k0
jmp @k0
ldc k3, ssr
.align 2
1: .long 0x300000f0
2: .long gdb_vbr_vector
#endif /* CONFIG_SH_STANDARD_BIOS */
! restore_regs()
! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack
! - switch bank
! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack
! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra
! k2 returns original pr
! k3 returns original sr
! k4 returns original stack pointer
! r8 passes SR bitmask, overwritten with restored data on return
! r9 trashed
! BL=0 on entry, on exit BL=1 (depending on r8).
ENTRY(restore_regs)
mov.l @r15+, r0
mov.l @r15+, r1
mov.l @r15+, r2
mov.l @r15+, r3
mov.l @r15+, r4
mov.l @r15+, r5
mov.l @r15+, r6
mov.l @r15+, r7
!
stc sr, r9
or r8, r9
ldc r9, sr
!
mov.l @r15+, r8
mov.l @r15+, r9
mov.l @r15+, r10
mov.l @r15+, r11
mov.l @r15+, r12
mov.l @r15+, r13
mov.l @r15+, r14
mov.l @r15+, k4 ! original stack pointer
ldc.l @r15+, spc
mov.l @r15+, k2 ! original PR
mov.l @r15+, k3 ! original SR
ldc.l @r15+, gbr
lds.l @r15+, mach
lds.l @r15+, macl
rts
add #4, r15 ! Skip syscall number
restore_all:
mov.l 7f, r8
bsr restore_regs
nop
lds k2, pr ! restore pr
!
! Calculate new SR value
mov k3, k2 ! original SR value
mov #0xfffffff0, k1
extu.b k1, k1
not k1, k1
and k1, k2 ! Mask original SR value
!
mov k3, k0 ! Calculate IMASK-bits
shlr2 k0
and #0x3c, k0
cmp/eq #0x3c, k0
bt/s 6f
shll2 k0
mov g_imask, k0
!
6: or k0, k2 ! Set the IMASK-bits
ldc k2, ssr
!
#if defined(CONFIG_KGDB)
! Clear in_nmi
mov.l 6f, k0
mov #0, k1
mov.b k1, @k0
#endif
mov k4, r15
rte
nop
.align 2
5: .long 0x00001000 ! DSP
#ifdef CONFIG_KGDB
6: .long in_nmi
#endif
7: .long 0x30000000
! common exception handler
#include "../../entry-common.S"
! Exception Vector Base
!
! Should be aligned page boundary.
!
.balign 4096,0,4096
ENTRY(vbr_base)
.long 0
!
! 0x100: General exception vector
!
.balign 256,0,256
general_exception:
#ifndef CONFIG_CPU_SUBTYPE_SHX3
bra handle_exception
sts pr, k3 ! save original pr value in k3
#else
mov.l 1f, k4
mov.l @k4, k4
! Is EXPEVT larger than 0x800?
mov #0x8, k0
shll8 k0
cmp/hs k0, k4
bf 0f
! then add 0x580 (k2 is 0xd80 or 0xda0)
mov #0x58, k0
shll2 k0
shll2 k0
add k0, k4
0:
! Setup stack and save DSP context (k0 contains original r15 on return)
bsr prepare_stack
nop
! Save registers / Switch to bank 0
mov k4, k2 ! keep vector in k2
mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3
nop
bra handle_exception_special
nop
.align 2
1: .long EXPEVT
#endif
! prepare_stack()
! - roll back gRB
! - switch to kernel stack
! k0 returns original sp (after roll back)
! k1 trashed
! k2 trashed
prepare_stack:
#ifdef CONFIG_GUSA
! Check for roll back gRB (User and Kernel)
mov r15, k0
shll k0
bf/s 1f
shll k0
bf/s 1f
stc spc, k1
stc r0_bank, k0
cmp/hs k0, k1 ! test k1 (saved PC) >= k0 (saved r0)
bt/s 2f
stc r1_bank, k1
add #-2, k0
add r15, k0
ldc k0, spc ! PC = saved r0 + r15 - 2
2: mov k1, r15 ! SP = r1
1:
#endif
! Switch to kernel stack if needed
stc ssr, k0 ! Is it from kernel space?
shll k0 ! Check MD bit (bit30) by shifting it into...
shll k0 ! ...the T bit
bt/s 1f ! It's a kernel to kernel transition.
mov r15, k0 ! save original stack to k0
/* User space to kernel */
mov #(THREAD_SIZE >> 10), k1
shll8 k1 ! k1 := THREAD_SIZE
shll2 k1
add current, k1
mov k1, r15 ! change to kernel stack
!
1:
rts
nop
!
! 0x400: Instruction and Data TLB miss exception vector
!
.balign 1024,0,1024
tlb_miss:
sts pr, k3 ! save original pr value in k3
handle_exception:
mova exception_data, k0
! Setup stack and save DSP context (k0 contains original r15 on return)
bsr prepare_stack
PREF(k0)
! Save registers / Switch to bank 0
mov.l 5f, k2 ! vector register address
mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3
mov.l @k2, k2 ! read out vector and keep in k2
handle_exception_special:
! Setup return address and jump to exception handler
mov.l 7f, r9 ! fetch return address
stc r2_bank, r0 ! k2 (vector)
mov.l 6f, r10
shlr2 r0
shlr r0
mov.l @(r0, r10), r10
jmp @r10
lds r9, pr ! put return address in pr
.align L1_CACHE_SHIFT
! save_regs()
! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack
! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack
! - switch bank
! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
! k0 contains original stack pointer*
! k1 trashed
! k3 passes original pr*
! k4 passes SR bitmask
! BL=1 on entry, on exit BL=0.
ENTRY(save_regs)
mov #-1, r1
mov.l k1, @-r15 ! set TRA (default: -1)
sts.l macl, @-r15
sts.l mach, @-r15
stc.l gbr, @-r15
stc.l ssr, @-r15
mov.l k3, @-r15 ! original pr in k3
stc.l spc, @-r15
mov.l k0, @-r15 ! original stack pointer in k0
mov.l r14, @-r15
mov.l r13, @-r15
mov.l r12, @-r15
mov.l r11, @-r15
mov.l r10, @-r15
mov.l r9, @-r15
mov.l r8, @-r15
mov.l 0f, k3 ! SR bits to set in k3
! fall-through
! save_low_regs()
! - modify SR for bank switch
! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
! k3 passes bits to set in SR
! k4 passes bits to clear in SR
ENTRY(save_low_regs)
stc sr, r8
or k3, r8
and k4, r8
ldc r8, sr
mov.l r7, @-r15
mov.l r6, @-r15
mov.l r5, @-r15
mov.l r4, @-r15
mov.l r3, @-r15
mov.l r2, @-r15
mov.l r1, @-r15
rts
mov.l r0, @-r15
!
! 0x600: Interrupt / NMI vector
!
.balign 512,0,512
ENTRY(handle_interrupt)
#if defined(CONFIG_KGDB)
mov.l 2f, k2
! Debounce (filter nested NMI)
mov.l @k2, k0
mov.l 9f, k1
cmp/eq k1, k0
bf 11f
mov.l 10f, k1
tas.b @k1
bt 11f
rte
nop
.align 2
9: .long NMI_VEC
10: .long in_nmi
11:
#endif /* defined(CONFIG_KGDB) */
sts pr, k3 ! save original pr value in k3
mova exception_data, k0
! Setup stack and save DSP context (k0 contains original r15 on return)
bsr prepare_stack
PREF(k0)
! Save registers / Switch to bank 0
mov.l 1f, k4 ! SR bits to clear in k4
bsr save_regs ! needs original pr value in k3
mov #-1, k2 ! default vector kept in k2
setup_frame_reg
stc sr, r0 ! get status register
shlr2 r0
and #0x3c, r0
cmp/eq #0x3c, r0
bf 9f
TRACE_IRQS_OFF
9:
! Setup return address and jump to do_IRQ
mov.l 4f, r9 ! fetch return address
lds r9, pr ! put return address in pr
mov.l 2f, r4
mov.l 3f, r9
mov.l @r4, r4 ! pass INTEVT vector as arg0
jmp @r9
mov r15, r5 ! pass saved registers as arg1
ENTRY(exception_none)
rts
nop
.align L1_CACHE_SHIFT
exception_data:
0: .long 0x000080f0 ! FD=1, IMASK=15
1: .long 0xcfffffff ! RB=0, BL=0
2: .long INTEVT
3: .long do_IRQ
4: .long ret_from_irq
5: .long EXPEVT
6: .long exception_handling_table
7: .long ret_from_exception
Reference in New Issue View Git Blame Copy Permalink