android_kernel_xiaomi_sm8350/drivers/media/dvb/dvb-usb/vp702x.h
Patrick Boettcher 3706a4da20 [PATCH] dvb: usb: add TwinhanDTV StarBox support
Add driver for the TwinhanDTV StarBox and clones.

Thanks to Ralph Metzler for his initial work on this box and thanks to Twinhan
for their support.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:40 -07:00

110 lines
3.5 KiB
C

#ifndef _DVB_USB_VP7021_H_
#define _DVB_USB_VP7021_H_
#define DVB_USB_LOG_PREFIX "vp702x"
#include "dvb-usb.h"
extern int dvb_usb_vp702x_debug;
#define deb_info(args...) dprintk(dvb_usb_vp702x_debug,0x01,args)
#define deb_xfer(args...) dprintk(dvb_usb_vp702x_debug,0x02,args)
#define deb_rc(args...) dprintk(dvb_usb_vp702x_debug,0x04,args)
#define deb_fe(args...) dprintk(dvb_usb_vp702x_debug,0x08,args)
/* commands are read and written with USB control messages */
/* consecutive read/write operation */
#define REQUEST_OUT 0xB2
#define REQUEST_IN 0xB3
/* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0
* request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer
* the returning buffer looks as follows
* request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */
#define GET_TUNER_STATUS 0x05
/* additional in buffer:
* 0 1 2 3 4 5 6 7 8
* N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */
#define GET_SYSTEM_STRING 0x06
/* additional in buffer:
* 0 1 2 3 4 5 6 7 8
* N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */
#define SET_DISEQC_CMD 0x08
/* additional out buffer:
* 0 1 2 3 4
* len X1 X2 X3 X4
* additional in buffer:
* 0 1 2
* N/A 0 0 b[1] == b[2] == 0 -> success otherwise not */
#define SET_LNB_POWER 0x09
/* additional out buffer:
* 0 1 2
* 0x00 0xff 1 = on, 0 = off
* additional in buffer:
* 0 1 2
* N/A 0 0 b[1] == b[2] == 0 -> success otherwise not */
#define GET_MAC_ADDRESS 0x0A
/* #define GET_MAC_ADDRESS 0x0B */
/* additional in buffer:
* 0 1 2 3 4 5 6 7 8
* N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */
#define SET_PID_FILTER 0x11
/* additional in buffer:
* 0 1 ... 14 15 16
* PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */
/* request: 0xB2; i: 0; v: 0;
* b[0] != 0 -> tune and lock a channel
* 0 1 2 3 4 5 6 7
* freq0 freq1 divstep srate0 srate1 srate2 flag chksum
*/
/* one direction requests */
#define READ_REMOTE_REQ 0xB4
/* IN i: 0; v: 0; b[0] == request, b[1] == key */
#define READ_PID_NUMBER_REQ 0xB5
/* IN i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */
#define WRITE_EEPROM_REQ 0xB6
/* OUT i: offset; v: value to write; no extra buffer */
#define READ_EEPROM_REQ 0xB7
/* IN i: bufferlen; v: offset; buffer with bufferlen bytes */
#define READ_STATUS 0xB8
/* IN i: 0; v: 0; bufferlen 10 */
#define READ_TUNER_REG_REQ 0xB9
/* IN i: 0; v: register; b[0] = value */
#define READ_FX2_REG_REQ 0xBA
/* IN i: offset; v: 0; b[0] = value */
#define WRITE_FX2_REG_REQ 0xBB
/* OUT i: offset; v: value to write; 1 byte extra buffer */
#define SET_TUNER_POWER_REQ 0xBC
/* IN i: 0 = power off, 1 = power on */
#define WRITE_TUNER_REG_REQ 0xBD
/* IN i: register, v: value to write, no extra buffer */
#define RESET_TUNER 0xBE
/* IN i: 0, v: 0, no extra buffer */
extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d);
extern int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec);
extern int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, int olen, u8 *i, int ilen, int msec);
extern int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
extern int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
#endif